#Inspection Sticker Remover
1 messages · Page 1 of 1 (latest)
We already have the inspection sticker scanner which will redirect already Approved/Denied parcels to the correct lanes?
So when they go through the Scanners when sent out via Invalid the Deny Sticker applier would not change from Approved to Deny that is what these convayers are with the red structure these are the Deny Sticker Appliers..
When parcels come in with Inspection stucker Approved on them when sent out from Invlaid the deny stickers appilers would not change them.
so, you want every deny hatch to automatically apply a deny sticker?
But, if a parcel is already approved it will never be invalid, so no need to replace its sticker
Or have a Inspection sticker remover convayer then when it goes through the Deny Sticker Appiler its get`s a new Sticker so then it would go down the convayor denyed submisstion line. Which is the long convayer after the Deny Stick Appliers on the output of the scanners Invalid
I think you are using this in the wrong way
so....you want to remove the deny sticker......just to reapply it later?
It would be better if you scan for a sticker at the start before any other scans
Ahh see where the Sticker scanner is the backend with the green approved convayor is, that is the No Inspction sticker appiled
ah, ok, i get it now
Not all parcels come in with a tiscker
yeah, the ones with no tag still need further processing, and the pre approved ones can be fast tracked to storage or denial
Because at the start I have a new scanner that scan for prohibated items inside the parcel
When a pacrel has a approved sticker on when it comes in from the lorries if it has prohibated items, then you would want atleast 1 inspection sticker remover and have a Deny applier after it. So from aproved to Deny if it conatins prohibated items
even if it is a "requires inspection" package, if it comes in pre approved, it is good.
any package that arrives with a green or red tag is already fully inspected and vetted
looks like a good daisy chain of scanners. if it has contraband, it will fail from that first scanner before proceeding into the rest of your scanners
But when its been scanned at Gets sent out of invalid because its still has the Approved Sticker on it when it gos to the line for Invalid submission you get penalized for incorrect Inspection Sticker Applied
so, you have green tagged boxes, failing the contraband scanner?
so with an Inspection sticker remover to take off approved and when it goes through the Deny sticker applier it can then carry on to convayor to invalid submission
The inspection sticker scanner only scans if it has Approved, Non, Deny the scanner does not change the boxes Inspection sticker
This is my layout at the moment
why is the pre-approval scanner last in your lineup? just curious. Most guys run it first before any other scanners.
I dont think it really matters where you have it at the start or end the main scanners do most of the work
true, but if it is at the end, there shouldnt be any deny packages left to kick out
I am gonna record a clip as yes its end of day but I still have parcels on the incoming line
i have been running this for ages and never experienced that issue before, that is why i am so interested in this
I have made 2 clips you will see what I mean about an Inspection Sticker Remover belt then get an updated sticker Deny
ok, so after watching that clip, did those parcels arrive pre screened? or did they work through your system, possibly before the customs scanner went online, and have maybe just been sittin gon a shelf waiting to process?
because pre screened, approved or denied boxes should always be correctly corresponding to the tags
Most of thoese parcels came with the Approved sticker
So the reason for the sticker scanner to be last is when its been checked from the other scanners when it comes from Valid then it can then be checked for an isnpection sticker if one is nt pressent then I would have one applied automaticly at the end of its scanning process
i still feel like it might just be good old operator error, we all do it, but i dunno. interesting problem though.
seeing as theres no bugs for incorrectly applied pre-inspection stickers it would be in your best interest to place that at the front to remove unnecessary scanning of parcels that are already good
i dont even run that scanner anymore tbh, if it is good, it will pass and if it is bad, it will fail in the chain somewhere and get ejected
-# in end game this is fine ^
You do know that when parcels come pre-approved they dont really get scanned for lets say wight and other stuff its a licance
yes they do
they do still get scanned if they go through the scanner, but they will pass because they have no incorrect criteria
thats the sourcve of my confusion
parcels with an approved sticker coming in have no need to be scanned as they are coming in good
so they are good to go to racks and be shipped out
i honestly think that what is happening, is that some boxes got put on the shelf earlier than the customs scanner going into the matrix, and since everything with no tag coming out of your system gets a green tag, it got mis-tagged. then it just hid out on the shelf for a bit.
Pre-Approved prohibbated boxes do not get scanned on when it enters the Wearehouse unless you check it manully or automaticly from your scanners
what do you mean by prohibited
Prohibated Items
i think we are getting lost in translation here
anything coming in with a sticker is good for that sticker
so if its a green sticker they just go to the deposits
same with green
there is no need to have a sticker removed unless you are placing stickers on them manually and sending them through
Let me start a new day clear out the boxes I have laying around and lets see if Prohibated boxes with a Pre-Approved sticker fails or passes on entering the weherehouse
From Unloding I mean
good idea, i think it is just a goof that got stuck on a shelf somewhere. clear out your system and let it run to check
I will be in Break Room Screen Sharing
an issue like this would have definitly raised alarms sooner if pre approved boxes were failing again
i wont be able to join, but if a box has both an approved sticker and a contents prohibited sticker, it should not have any content in it that would make it denied
My guy... Pre approved
boxes with a content inspection sticker will always pass the content inspection scanner
You do not need to rescan it, it can be sent straight to the output.