Overstrum on e-kit

[pliant marsh]

Hello, my new e-kit (dd200x) overstrum alot and i can't seem to find a solution.

I have maxed out the debounce threshold in the binds and it helps but its not enough unfortunately. I have tried the drums out on clone hero and there i can find a high enough threshold that works.

Anyone have any ideas for a solution?

[sour trench]

whats the value you're using in CH currently?

[pliant marsh]

Currently have overhit threshold maxed to 50, since its working well i have yet to see how low i can go but 35 was too low last i tried. velocity 10 and dynamic 100

[jagged silo]

Have you tried changing it on your kit?

[sour trench]

agree fixing it on the module settings is the best idea, but

[sour trench]

@high hamlet maybe it's worth considering re-raising the max debounce threshold to 50ms again?

[high hamlet]

absolutely not, that would set a rough maximum input threshold of 20 inputs per second

while most people won't reach that in most songs, when things do get even moderately fast it means you have much less of an upper ceiling to work with

[high hamlet]

and keep in mind this threshold is if you play 100% perfectly, in practice it might be more like 15-17

[high hamlet]

what do the overhits look like in a MIDI monitor such as https://www.midimonitor.com/ ?

debounce is not the real solution here, there's something quite wrong if you need anything above 30 ms or so

[boreal notch]

I looked at the dd200x user manual and it looks like it has nothing for crosstalk, debounce, etc. 😭

[pliant marsh]

unfortunately yes. I thought i got a set that would be good enough to do the job but perhaps its just too far down the ladder

[pliant marsh]

This is from 1 hit

[high hamlet]

yeesh

yeah, if it's doing that with every hit then you've just got a bad kit on your hands unfortunately