I have been wanting to create something outside of scenarios and mission for my community, so I thought I would try and create a radio backpack mod. It is still WIP, however it is functional.
https://reforger.armaplatform.com/workshop/62A8A1CEDE63DE7B-LongRangeRadioBackpacks
The frequencies have been separated between the Short Range and Long Range Radios. This enhances the importance of comms between SLs, JTACs, pilots etc for coordination.
Details:
Short Range - SR (Squad Radios)
ANPRC68 (AR), ANPRC152A(RHS), R148 (AR) & R187P1 (RHS):
-
Channel 1:
- Channel frequency : 32 MHz (changeable)
- Min tunable frequency: 30 MHz
- Max tunable frequency: 52 MHz
- Transmitting range: 2 KMs
- Frequency resolution: 200 (goes up/down in increments of 2MHz)
-
Channel 2:
- Channel frequency : 48 MHz (changeable)
- Min tunable frequency: 30 MHz
- Max tunable frequency: 52 MHz
- Transmitting range: 2 KMs
- Frequency resolution: 200 (goes up/down in increments of 2MHz)
Long Range - LR (Radio Backpacks)
611 Radio Backpack - Grey/Black/MC/OD/COY & Wartech BB102 - EMR/FG/MC/OD
-
Channel 1:
- Channel frequency : 53 MHz (changeable)
- Min tunable frequency: 53 MHz
- Max tunable frequency: 76 MHz
- Transmitting range: 20 KMs
- Frequency resolution: 200 (goes up/down in increments of 2MHz)
-
Channel 2:
- Channel frequency : 54 MHz (changeable)
- Min tunable frequency: 53 MHz
- Max tunable frequency: 76 MHz
- Transmitting range: 20 KMs
- Frequency resolution: 200 (goes up/down in increments of 2MHz)
Use the radios the same way you use the AR radios.
- Make sure that your SR (ANPRC68/152A) channel is set to channel 1 (CAPS by default for broadcasting (PC))
- You can listen in on a 2nd SR (ANPRC68/152A) freq by setting channel 2 to whatever freq you want. To broadcast you would need to select channel 2 in your radial menu and then press CAPS to broadcast.
- Ensure your radio backpack channel you want to broadcast is set to channel 2 (LCNTRL+CAPS by default for broadcasting (PC))
- You can listen in on a 2nd Long Range (Radio Backpack) freq by setting channel 1 to whatever freq you want. To broadcast you would need to select channel 1 in your radial menu.
WIP
- Physical antenna (visual only)