#arma3_troubleshooting
1 messages Β· Page 151 of 1
look this up, could help
Hello, I am getting starting the game or battleye has failed, what should I do
I have most of my mods downloaded from a drive so it's locally downloaded not from the workshop, it used to work for months now but now suddenly it doesn't
I tried ticking off a couple of mods, yet nothing worked
try if game runs without any mods
it does
and it actually does with the private/drive mods that I have imported from a drive so it's not those mods
please don't tell me I am gonna have to check if the game starts with every mod that's gonna take forever ( if you do say I will btw I am just joking with that complaint π )
I just have hundreds of mods
I've played around with different Memory allocators, & so far -malloc=system has given me some progress
I no longer gex the generic 0xC0000005 - ACCESS_VIOLATION, instead I get status_heap_corruption 0xc0000374, which is the first time I've ever seen it
What does that error mean & how can I fix it? Only solution I found by quickly googling was to reset all my launcher parameters, but I worry that will put me back at square 1
Also found somebody having a similar issue to me, and they discovered that their wireless headsets faulty bluetooth cable out of all the things was at fault. I also have a bluetooth headset, so could that be the cause for me too?..
Crash when I spotted a Nyx at Spawn Point in Rodopoli
Does anyone know why my friends cant join my private internet server?
You need portforwarding
!localhost
To host a server or a game session locally, you need to make sure first that your WAN address / external IP uses the IPv4 protocol!
Check your routerβs status page in the settings to confirm. (If in doubt, ask your ISP, Websites like βwhatismyip.comβ give you a false positive!)
Local servers and games can not be hosted on an IPv6 network, or IPv4 via DSlite tunnel!
https://www.avg.com/en/signal/ipv4-vs-ipv6
Once you have confirmed that your connection uses the IPv4 protocol, you need to manually open / forward the ports 2302-2306 UDP (https://community.bistudio.com/wiki/Arma_3:_Dedicated_Server#Port_Forwarding)
See your routerβs manual on how to do that, or ask google: β<your router model> + port forwardingβ
Hey, my unit & a joint unit are trying to add a mod to our server, we add the key & the mod on the server, but we keep getting "###.pbo are not signed by a key accepted by the server".
We have permissions to resign & rekey the mod, in order to see if we could get it to work, but it still won't accept it, even with the new key on the server & new bisign. (The PBO itself never changed).
Any ideas would be welcome. Thanks
(The mod is theirs), (And they can't figure out why re-keying / resigning it won't help)
keys in right folder?
hmmm, my radar is set to send, launchers are set to recieve... am I missing something with the AA systems?
Hey can someone help me out
not until you stated your issue
My Arma 3 refuses to launch anymore, with or without mods. It just kind of gets quied during the loading screen
Local files verified, nothing fixable found
did you try to run the exe from the install folder directly?
I spent 3 days downloading the game (on the landside with bad connection) so I'm a bit hesitant reinstalling the game π
Let me try
if that works, it could be some kapoot stuff in your profile files
Dang, that worked! Thanks π (Will delete my profile now)
crash in windows audio, microsoft is already working on it
I don't know if this is the place to ask this, but I would want to unsubscribe from all the mods I have subscribed to. By clicking the "Unsubscribe from all" button in the Steam workshop they all got unlisted but I didn't get any disk space back. Am I allowed to just delete the 107410 folder without Steam breaking?
But I don't want it to redownload anything, I want to get some disk space back by deleting mods
Then you should not worry about deleting those folders. If they are all unsubcribed then Steam shouldn't reload them. Unless you overlooked some.
I tried clicking the Unsubscribe from all Workshop mods button in the Arma launcher itself, and that seems to have done it aswell
Thanks for the help :)
I think your subscriptions update properly only after you open up launcher
I'm very new to editing. I have a basic Zeus-enabled mission that works fine when:
- tested from the eden editor;
- tested from a locally hosted server;
However, when this mission is exported to the multiplayer missions folder, and then uploaded to my Linux-based dedicated server, the mission doesn't work at all.
- When you join the dedi-server the first time, the lobby does not show any of the player slots or virtual slots, so you can never start;
- When you disconnect, if you try re-connecting again, you get a "maximum players reached" error and cannot join, so you must restart the server from the Linux server's shell.
Any idea as to what might be going on here?
Can anyone tell my how to fix this??
you can't
so im not new to object builder or creating rvmats etc, the basic stuff but i somehow managed to mess up my Microsoft visual c++'s, which ended up messing up my object builder. i reinstalled every possible one i could think of and im just greeted by these. ive already looked up the .dll's
object builder
rvmat
Arma 3 relies on Visual C++ Redistributable 2013. You sure you reinstalled that one too?
Hi can anyone help me with FPS problems >?
We cant if you dont share your problem
He already posted in three channels and nothing is really happened. Just an usual β30 fps reeeβ
ah so just spam 
wouldnt say spam, more of posting in other places as people were talking..
by the server rules it is spam to ask/write the same thing on multiple channels. same people see the channels and respond if they can.
As HG said, crossposting is spam
yeah this is arma 3 tools
Any kind of help will be highly appreciated! Today i started my PC and suddenly Arma 3 is missing from my steam library!!!
steam props just forgot where arma is installed, try installing the game to the same directory
@grim tinsel normally its C drive, but in my case its E drive . But can't change download location for steam (in settings).
But can't change download location for steam (in settings).
Huh? just change the install location when you're going through the installation prompts
anyone help me out keep getting a message when i try to load into a sever it says are not singed by a key accepted by this sever. to play on this sever remove listed files or install additional accepted keys anyone help me out please so confused
youre probably running wrong mods for that server
you can only join server if you have correct mods loaded
I'm trying to join a rust server and when I download the mp mission files, it either fails by getting a Battleye Query timeout, or a Steam auth error
They told me to come here and try and find help
can someone help me with this
looks like a config error, or a script error
broken compat perhaps was it?
this is what I keep getting when trying to join a server, and I have 93ms
ive done that already
and I also already uninstalled the game and reinstalled it multiple times
thats why I came here to see if anyone could help
@uncut trellis
I'm trying to update my arma 3 but it keeps going to scheduled
Can a moderator assist me?
we moderate the Discord server
Do you also help with troubleshooting?
people who know do it, user, moderator or staff
seems like issue connecting to steam auth servers
could be problem with your DNS or e.g. computer time or just OS in general (windows something something )
Well it was also giving battleye problems
first log out from STEAM and back in
Did that already
next step restart OS
Did that too
wifi or cable lan ?
could be issue with wifi
badly setup packet flagging or stripping flags or blocking some sizes etc
could be anything on the router
ive reinstalled arma 3 tools many times, downloaded microsoft c++ 2010, 2013 and any other one i can find and im still getting this error. everything works in a3tools except object builder and rvmat viewer
please someone
Validate your game files
ok
@ocean nacelle You already got the answer
oh
I tried validating
But itβs trying to update the game and it wonβt update or so
Restart steam or your pc
@tiny imp Kicked off player (teamkiller) can rejoin after certain time in warlord? (continuation from what i posted in #warlords_discussion ).
wasnt it like until server restart?
that's connectivity timer timeout (manual actions (vote/admin/server) are different timer)
see kickTimeout in server.cfg https://community.bistudio.com/wiki/Arma_3:_Server_Config_File
there are multiple timers in kickTimeout and multiple settings for the timeOut defined ```
kickID (type to determine from where the kick originated e.g. admin or votekick etc.)
0 - manual kick (vote kick, admin kick, bruteforce detection etc.)
1 - connectivity kick (ping, timeout, packetloss, desync)
2 - BattlEye kick
3 - harmless kick (wrong addons, steam timeout or checks, signatures, content etc.)
timeout = in seconds how long until kicked player can return
0 seconds
-1 until missionEnd
-2 until serverRestart```
unless there is exploit and one can 'clear' that 1st timer by abusing then 2nd timer (would need repro proof)
whenever I open arma from the launcher by pressing the big yellow play button, the game will open but will immediately try to connect to a specific server instead of taking me to the menu. How do I fix this?
check if you've not enabled the server connect parameters in parameters tab
nope
Arma 3 crashed while Resuscitating a friendly player, but no crash dump. I could only pull up Task Manager and sign out of windows. When i relogged to same EU Warlords server, this is what I get
Can anyone help?
Try to verify the game via Steam
Arma 3 Eden Keyframe Animation Camera not ending, it finishes its animation but the camera is always on the screen and doesn't switch to the players POV, here are the scripts we've tried using under event finished:
player SwitchCamera "INTERNAL";
[1, 1, false] call BIS_fnc_cinemaBorder;
player playMoveNow "amovpercmstpslowwrfldnon";
_camera cameraEffect ["terminate", "back"];
true
Anyone know why I don't get the incoming missile beep anymore?
i can see it incoming on the radar, but I dont get any audible tone to say its incoming
(this is in jets)
also does anyone know how to change my units back to meters and kilometers D:
its in miles/feet, i went into my config file but useimperial was already on 0
Verify your install by Steam. Otherwise check if your virusscanner may have blocked that file from loading.
Still don't work
Then I don't know what else.
I'll just look on the web
Do you still have a 32-bit operating system? Or is it 64 bit?
32, I tried running on 64
same problem
32 bit OS will not be able to run that specific file. Pretty sure. Though I don't know why it would try to do that if you have a 32bit OS,
same problem π¬
Maybe one of the BI devs looks at this later and can explain.
I guess
Your game client shows that. Not your server. Something is blocking BattleYe service I think. So check your Antivirus too to make an exception.
ok, ty
Please reply to this ASAP if anyone wants or knows what this problem is
Thank you
how would i fix this error?
18:32:51 Files D:\SteamLibrary\steamapps\common\Arma 3!Workshop@Zeus Enhanced - ACE3 Compatibility\addons\zen_compat_ace.pbo are not signed by a key accepted by this server. To play on this server, remove listed files or install additional accepted keys.
... remove listed files or install additional accepted keys. How much clearer do you want your answer?
You have that mod enabled and the server refuses to accept that.
Either remove the mod, or make the server have the keys to positively accept it (assuming you have control over the server)
I'm pretty sure I did, might as well reinstall EVERYTHING again
I still need help
what should i do with this popup
@fringe salmon Seems to be part of ace or a ace related mod. In launcher you can rightclick a mod to get these options (see pic) try the repair?
Ace also required some extra installation. The steam workshop page has the instructions
It does not require any extra step.
BattleEye sometimes goes haywire and blocks the dlls in that case you can disble it or just try again later...
Oh. Soz, maybe I was thinking tfar stuff. 
Does anyone know how to fix this? i got a problem when im playing MP i dont hear the shots of my friend only the cracks at the end
Anyone had an issue with steam downloading an older version?
I'm on ubuntu and for some reason my arma 3 is v1.82
I just now see the official ports are on that version
Can I somehow download 2.02 and play with proton?
Should be, yes. How?, don't know. Linux and Mac native versions are not supported anymore. You'll have to use Windows version and proton somehow.
@wary radish ask in #linux_mac_branch all the linux people are there. 2.02 no you can't, the current version is 2.06 and that you can yes
Right, mixed up the versions
alright so i have no clue what i need to do or havent done or have done wrong with arma ive looked around but havent really found much. my game Stutters like badley every 2 or 3 seconds the video just pauses for half a second and then just plays for another 2-3 seconds then the pause again. the sound keeps playing during the freeze. its constantly happened since i have had arma this is on SP and MP so its not a lag issue, its not a hardware issue either i know that and i have tried uninstalling and reinstalling and its not a hardware issue either or a hard drive issue. id really appriciate some help on this as it ruins my game as i know arma can be hella fun
I need help
Whenever I try to join my friend it doesnt work
If I join from the launcher, arma infinitely loads
If I join from steam, It says that connection has been lost and I cant join
If I try to join from arma nothing happens and my game lags
has your friend opened up the gaming ports in portforwarding?
Where can I ask a general question about a mod totally obliterating my ability to make missions for units?
Even if I play without mods, I still get mod error "cfg" messages when I start a game, start a mission, and when I edit a mission
Hey, can anyone help me with this issue? I'm making an ORBAT for a AH type faction as can see in the picture, however one of the vics which is from Northern Fronts isn't going into the mod, instead it's remaining in its own separate category, underlined at the bottom. Now I think I know the issue but not sure, I have two tracked categories which is stopping them from being in the same category, so my question, can I somehow merge them? Be that through Arma tools or some other way? Thank you
I don't know what they are but via making a config or report it to the author
Hey shooters, hope your all well! I'm trying to configure the video settings so that I can read the cockpit dials in the Wipeout. Any pointers? Much appreciated!
Texture setting should do
using ALiVE so idk if I can
IDK what ALiVE does so can't say
I've got texture set to ultra, is there anything else that would affect it?
Then that's it. Or maybe you could use this Mod
https://steamcommunity.com/sharedfiles/filedetails/?id=1223309664
Ooooh shiny! Thanks mate!
when you start arma, just don't touch your computer until the application goes into full screen. That ought to stop it from infinitely loading. As for the multiplayer, I have no clue I'm afraid
The highest quality version will be the first person version. As soon as your not in first person it won't look as good, this includes when your using the splendid camera.
Hello ! I'm trying to get rid of a profile (I'm playing on Life servers, so I regularly delete and create new profiles) but it still recreates itself every time I launch the game, and when I'm trying to select another profile, the one I'm trying to delete still decides that I'll play with this one instead of the one I chose. I even tried to delete the files of the profile, but it keeps coming back... Do you know how I can solve this issue ?
check your parameters in the launcher. there's a "profile" option that will always choose that profile, even if it doesn't exist when you launch the game.
Okay thanks
Remove the outdated weird ace compat thing you are loading
Hello. got problem with network connection. try to join server. Connecting... Connected.. Disconnected...
Modlist - same.
We are on Hamachi. Try to join as local server.
Hamachi diagnostic to host:
Tunnel: OK
Local results:
Adapter configuration: OK
Traffic test: OK
Peer results: [256--]
Adapter configuration: OK
Traffic test: Inbound traffic blocked, check firewall settings
Firewall - off, Antivir - off.
Nothing useful on Arma logs.
Any idea?
i tried it @uncut trellis it did not work
well the error message means you have broken mods
not really much can be said
you will need to track down which one is broken
or which ones
Anyone know how to get rid of the "Error when loading Steam composition" message? I suspect that one of the steam compositions I'm subscribed to was deleted but arma keeps looking for it anyways, because I've tried looking up the ID it gives me and it's a page not found/removed thing that pops up
Thanks Asaayu! I do spend all of my time in first person mode though, I'm just trying read the gauges & MFD's in the Wipeout. Currently thier just too blurry to read.
Ah, yea then it's just the texture quality IIRC.
Could be bloom*
Are the Arma 3 servers Down?
What's IIRC stand for mate?
if i remember correctly
^this
I am once again asking for help.
Still keep crashing with 0x00005, no real/obvious reason; anywhere from as soon as I join the server and spawn to after playing for an hour or so, but the crash is guaranteed to come eventually. Only happens with a certain community so I guess it's one of their mods, I'm the only person experiencing this issue, both personal & server RPT logs don't show anything, how else can I look for causes?
Hmm well I need to figure it out
Anybody got a clue about this? occasionally it forces me to restart my whole game when joining a server
black
this
How do I fix thiss
Like I really need to fix this up
I tried reinstalling ace
I tried to validate the game
Can anyone help, I'm getting low fps (around 40) and only 50% or under GPU and CPU usage
This only occurs in arma 3
if in MP, it's good
Sp
see https://community.bistudio.com/wiki/Arma_3:_Performance_Optimisation then, perhaps it can help π
Can someone help me with my issue?
Thank you
I was told by others that it was caused by CPU bottleneck, but I highly doubt that
Is anyone able to help me with this
Hello, I've done something very stupid and I need help ;-;
I've unsubscribed from around 1500 mods all at once, and now my Arma 3 launcher keeps crashing when I try to launch it.
I've verified my game filed.
I've deleted the mods manually too from the game folders.
I've checked the acf files that has all the subscriptions in it and it is still broken.
Is there a way to fix this without having to do a reinstall?
I do have the crashlogs from the launcher I think.
This
Irrelevant but, who has 1500 mods in arma 3 in the first place lmao
I did :l
775 GBs worth of mods
not including any game files or DLCs
Jesus
maybe just me but Warlords Official US#01e just took a dump
Did you have them all on at once
Affirm, but never ran the game with all of them.
I discovered couple months ago that if you go above 500 give or take then the game will refuse to launch, at around 400 give or take you can still load the game but it'll take like half an hour to an hour to load.
Trying to avoid that cause if I have to do that I'll have to delete everything including other applications and games to make space required by steam.
Just Delete all Mods, then Registry clean PC
Tell me how please!
Then Verify Integrity of Game files
grab a free registry cleaner
Any suggestions?
the mods are in one of arma's folders, just delete that root folder
Already done
Yep done
Already done too
Official Warlords US#01e Server Crash
Delete your User\AppData\Local\Arma 3\everything in here
it's call cache stuff
I've given up and will do a reinstall
Have to delete few things for that but let's just hope it works
I fucking love you >_>
It worked
Myself and others in my group have been having issues with the game crashing, and then not being able to get back into the mission using the same slot.
I myself experienced it yesterday. The game crashes, I get a status access violation C0000005, I load back in. And if I try to reconnect to the same slot, it crashes again as soon as I get to the map screen. If i choose a different slot, I can load in. Others in my unit have been intermittently experiencing similar issues.
We run a fair amount of mods and play different types of scenarios, so it's really impossible to nail it down to one specific type of thing. The crash has occurred for some people when a vehicle explodes, or mine for example happened when I put down a Zeus CAS module.
Anyone have any ideas what might be the cause?
Allow Read/Write Permissions on your Arma 3 Folder, then do what I showed @round slate to do
hell yeah bro! I'm happy for you man
To be clear, this is not a crash reporting channel. This is a troubleshooting channel, crash and bug reports go to the feedback tracker website
ok
Warlords US#01w Took a dump again?
Looks like it, No Bueno
Is there a way to find what exactly does it mean?
Exception code: C0000005 ACCESS_VIOLATION at 4C5D90A6
Fault address: 4C5D90A6 00:4C5D90A6 Unknown module
It crashed server and all clients
This is the list of known error codes and possible ways to perhaps solve them: https://community.bistudio.com/wiki/Arma_3:_Unusual_process_exit
If i'll download a mod and then open arma 3 and go to mods it says on that mod on the left side a clock and then '' queue problem '' someone knos how to fix?
How big is the mod? Maybe it needs more time to get downloaded?
The mods aren't big, sometimes the mod is big but idk
I asked LoboTheGold, how could you know if the mod is big?
right click on it, select PBO Manager -> unpack to
i dont get that option
hmm
maybe create a folder with the same name as your PBO and from the window you posted just select all folders and files and drag to your folder
Cltr+A to select or click and hold left mouse button, don't remember which one works
yeah you can copy the pbo anywhere just not in the same mpmissions folder
then open that funny pbo manager window and drag files from it to your new folder, it should work
like this?
oh yes
i got it working :0
thank you very much @golden nova :)
:-3
no problem
i needed to make it mlod to add it in object builder
but my main problem is
the fbx option doesnt show
i made something using the blocks as a test and i cant export as fbx
no matter if its mlod p3d or whatever
that is forbidden. you wont get any help with making forbidden things
i cant export anything as fbx
im not doing anything forbidden, im trying to export something i did using blocks as fbx
but there is no fbx option
I cant trust you.
wdym you don't trust me
im literally using stuff provided in object builder
the blocks and shit
using the stuff provided in object builder isnt ripped models
theyre literally just blocks and circles
please dude. dont lie to me. thats just sad.
Hi need help with Arma 3
channel works so that you just write down the issue and if someone can answer they usually do
oh sorry @uncut trellis
I have a problem. I dont know how to set up a server correctly so that me and my friend can play together
no need to apologize
in case you mean local hosting you will need to open the gaming ports via portforwarding so that your hosted server can be connected to
!localhost
To host a server or a game session locally, you need to make sure first that your WAN address / external IP uses the IPv4 protocol!
Check your routerβs status page in the settings to confirm. (If in doubt, ask your ISP, Websites like βwhatismyip.comβ give you a false positive!)
Local servers and games can not be hosted on an IPv6 network, or IPv4 via DSlite tunnel!
https://www.avg.com/en/signal/ipv4-vs-ipv6
Once you have confirmed that your connection uses the IPv4 protocol, you need to manually open / forward the ports 2302-2306 UDP (https://community.bistudio.com/wiki/Arma_3:_Dedicated_Server#Port_Forwarding)
See your routerβs manual on how to do that, or ask google: β<your router model> + port forwardingβ
i mean via internet
ok that i will try this link than
how do i check if my wan address uses IPv4 protocol
?
ok so my view distance is somehow at 200 meters
what are you playing?
arma 3
so tldr at stratis air base, im standing on the runway, view dist is set to 2k, i should be able to see the hills right? nope
ye but you know, game mode
only see barely the hangars
ah, im launching stuff from eden
so, single and multiplayer
yes, especially ace, but this happens without it
does it happen without any mods?
yes...i just said it did
you said without ace
yeah ok im booting it up fully vanilla, i had in the past and it still happens
are you running editor via MP menu or via the SP editor
should not be
could be that or some other mod
unfortunately dont know any way to know except process of elimination
yeah it'll take a while, thanks
its ace view distance limiter
WHO THOUGHT THIS WAS A GOOD IDEA?
bruh
doesn't ace allow for farther view distances than vanilla?
dont wanna start a convo here or admins will get angry but
whats the point? besides it is still capped above 200 meters cuz, engine
I'm not really sure what you're talking about. View distance isn't engine capped to 200 meters. Ace allows for differentiating different view distances depending on whether you are on foot/in vehicle/in the air etc which regular vanilla doesn't really do. Sounds like you had ace booted up with view distances set low for whatever reason.
And, iirc ace overrides any game settings/video settings allowing you to push beyond what vanilla allows.
view limiter is disabled by default too.
that probably should get downloaded from the interwebs when you join servers
PLease help
Me and a few buds have tried a few things and run out of ideas on how to join each others private servers.
we have tried UPNP
!localhost
To host a server or a game session locally, you need to make sure first that your WAN address / external IP uses the IPv4 protocol!
Check your routerβs status page in the settings to confirm. (If in doubt, ask your ISP, Websites like βwhatismyip.comβ give you a false positive!)
Local servers and games can not be hosted on an IPv6 network, or IPv4 via DSlite tunnel!
https://www.avg.com/en/signal/ipv4-vs-ipv6
Once you have confirmed that your connection uses the IPv4 protocol, you need to manually open / forward the ports 2302-2306 UDP (https://community.bistudio.com/wiki/Arma_3:_Dedicated_Server#Port_Forwarding)
See your routerβs manual on how to do that, or ask google: β<your router model> + port forwardingβ
π this is what is needed to be done
my bad, I relocated it to a better thread.
I'm hosting the server, dedicated. It's always worked until now, idk what happened to the list.json and I just need to know how to replace it
no idea about that unfortunately
what?
honestly
i have been fighting this game all day
from it manually crashing, to hard locking my pc,
for it now to not even luanch servers correctly
its possible your internet connection does not support hosting
oh boy
the above text talks about that
can anyone help me with a problem? I joined a arma 3 zeus sever and even tho im the admin do not get the edit button when i try to change the parameter settings
Nachricht an #arma3_questions
Bro
@last sleet post only on 1 channel please
im finna have to get hand held for this
im going on a goose chase
got any help?
anyone knows why my arma keeps crashing when i press ` ?
Did you make a crash report ticket on the feedback tracker?
Log into your router, look for something like an internet or WAN page. Look if it shows a WAN address of 4 numbers (1-255), seperated by dots. (which doesn't start with 10.x.y.z, 172.16-31.x.y, 192.168.x.y; it will have one of those on the LAN or private side, but should not be on the WAN side)
Anyone able to help out, ive got an error msg for the server im trying to join: "Session lost - Verifying PBO failed: mark\addons\functions_f_mark.pbo
It worked before the patch
@bright grove like with every update. servers take a bit time to get updated too
So its server sided yeah?
possibly
Its all servers for me, including the official arma 3 ones
thanks
@bohemia fix your game pleaase
@vital hound in case you are referring to the update that was just released, it will take some time for it to get around
you will need to exercise some patience
Just re-installed the whole of arma and mods.
You have to install said mod
help
After this latest patch my game no longer is finding the folder with my profiles in it. I lost all my profiles and MPmissions that I was working on. I have tried to use the launcher to launch profiles but that doesnt work and have also tried to use the launcher to point to the profile folder. Has anyone had this happen before and have a fix? I have also uninstalled and tried a fresh install as well.
The game also crashes after I exit the profiles menu in game.
server needs to install todays arma update
ive tried 10 servers including officals
From the looks of it, Arma is only reading my "Arma 3" folder for profiles and not my "Arma 3 - Other Profiles" folder.
is your own arma updated?
What is the stalk talking key/
yes
Would you fellas happen to know?
ill try to again
you could try to delete that pbo (its in arma folder) and then verify game files ins team
k
so
me and my buds made a server, but the person who hosts cant even access ACE.
interaction menu doesnt show or nothin.
nvm
ik this isnt arma, but noone from argo server knows how to fix this, happened to a friend of mine who wasnt able to join my server
https://community.bistudio.com/wiki/Error_Zero_Divisor i think it has something to do with this
There is some server that has a mission name with zero letters in it. And there is a error in a base-game script.
You cannot fix that, and really that error isn't anything you should need to fix
so, bassicly wut ur saying argo has still non fixed problems
Argo will never get an update
"stalk"? If you mean default: Capslock
can someone elp me
my arma 3 zeus refuses to start
it just says wait for zeus no matter what i do
it needs someone to be Zeus
but it worked just fine yesterday when i played alone?
someone probably had been on earlier and placed down spawns and such
why would you want to be on zeus game without zeus anyway?
i like playing solo
there would not be anything to do
a lot more relaxing and fun
if there is no zeus to make stuff up
like i said i thought ai started for me
i got bored with combat patrol alone so i thought id try zeus
i usually start a quickplay lobby and just play combat patrol or smth
alright, well you could join up as the zeus and place down your own mission
hi there, im getting this error. do you think its because of the mod or should i verify game integrity
please help its really urgent
i was trying to play stalker arma 3 using the armSTALKER WARZONE
broken mod likely
you cant do anything about it but not use whatever mod is borken
oh boy
Now i have a issue thats finicky
so, When i launch a server with UPNP, it works for people some times,
then for the rest of the time afterward it just breaks.
can anyone help? for joining through steam it just says Server not Responding,
and a whole bunch of my trouble shooting dosent help.
Is there a way I should be calculating fov to run a triple monitor setup and have minimal distortion? I've been trying to search and test by messing with fovTop and fovLeft, but I'm still getting pretty extreme distortion on the outer most potions of the displays.
that's normal. i have that too
Ah bummer, I was hoping there'd be a way to adjust the fov more
How do i stop my ace from showing errors
you have some old broken ace compat in use
which is what?
I dunno
where can i find it?
in your mod list
i can check
i know this is super niche and not even sure if its the right channel but
Im running a dedicated server and when i try to spawn a group of AI with Custom composition they just kinda do this and i've never had this happen before, Tried restarting the server to no avail
https://gyazo.com/55305f05d4a1490fd9b88685bc086b9e
again, probably a super niche criteria but if anyone has any ideas i'd be happy to hear
answer is probably mods
still not sure exactly what caused it but you were right, reinstalled the map and composition mod and it seems to work now, Thanks
my friends can no longer see my server in the browser, nothing has changed in my internet and i even manually port forwarded my pc. This problem isn't happening with other games, only arma, and i can't figure it out whatsoever, any thoughts?
how do i fix this?
i cant join any servers this pops up on every server.
pls help someone
You seem to be missing an addon or running wrong mods to join servers. Us the launcher server browser so it can set up mods for the servers before you run the game.
okay i will try it
Hey I am currently having an issue not being able to update a mission that i have published onto the workshop.
When trying to update it via the workshop uploader in 3den I cannot see the mission. I have tried publishing empty missions as a test, those work just fine.
I am also getting this message in the RPT file when ever I open the "Workshop Scenario Management" window
13:39:04 Array index out of range
The mission shows up in the A3 Tools workshop publisher, but as expected you are supposed to use 3den to update those workshop items.
Can someone help me fix this?
Hm, looks like you can do a workaround, which is not intended. Out of frustration I uploaded an empty mission with the same name to the workshop. Both are listed now on my steam profile's workshop items. Ingame it only shows the first of the 2
the one shown is the original upload, so the one on the right of the previous image
Could it be that this is a bug that happens if you upload a mission, but delete it via the steam workshop page and not through the 3den workshop management window? i still am using the cloud space of the old first upload that i have deleted.
ace mod error. ti pops up when opening the game, it stops if i remove it but its really useful and i have troubles without it
when anyone joins my dedicated, they get this about half the time.
It removes their ability to respawn, and forces them to restart their game.
Really disruptive in the middle of ops.
If anyone has advice, I'm all ears
you are loading some outdated ACE compat mod
i fixed it thnx π
that should be a gamecrash right?
currently on profiling and no, no game crash, just prints that into rpt
Hm I expected Fail to be gamecrash :sad:
if you run diag binary, you can probably trigger a crash there, which should tell me where it goes wrong
How do I stop this
can try. not sure how to exactly. just switch branch to dev and run it?
or copy diag bianry over
sorry to interrupt but trying to configure my server after a small break
one of my workshop items in the mods list was removed/banned on the steam workshop, is there anyway to figure out which one it was?
just ran it with the arma3diag_x64 binary. unfortunately(?) no crash. still same behaviour. just prints Array index out of range into the rpt periodically
Best way to approach is probably for me to make a custom build that force crashes there and tells me what happened.
But I don't have time for that currently
that is fine, i found the workaround, still a bit of an annoying thing
Hello. My Arma just got screwed up today. Yesterday was perfectly fine I was making a mission in peace. Today I wake up and see my Mission that I was working on and the previous missions are all gone. I do not know why or how this has happened. My mission files are still where it is supposed to be, but in the editor there is absolutely nothing. There is an owner profile that is in Arma and yes it is the same as my Windows name but how do I get my missions back?
Hey, why are my trees semi invisible. Not a great look
Check the pinned
arma 3 crashes when loading maps in the launcher, any fix?
neither me or my friend can host a sever using the hosting stuff that arma gives
was working fine before
Possible to completely reinstall Arma when you got it?
Keeps loading me into Contact for some reason
and I don't even have Contact
What do you mean? What do you have?
It is possible, more like forced to have enoch part of Contact
Also you can always reinstall as long as you have the access to your Steam account
how do you like reset everything on Arma
I even deleted the Contact file but it no workies
Steam file verification process:
Right Click on game -> Local Files -> Verify Integrity of game files
Mod repair process:
Open Launcher -> Right Click on mod -> Repair
^this @misty lava
Does anyone know the command line to use to run the new CDLC on a dedicated server? (For sog it was -mod=vn)
-mod=ws
tyty, was just about to try that lol
It always should be the same with the folder name
gotcha, cheers for the help
Seriously read what I said
What do you mean? What do you have?
It is possible, more like forced to have enoch part of Contact
what does enoch mean
A part of Contact DLC (Contact Expansion, to be exact), which everyone should own (in the terms of the data)
Also
What do you have?
I don't have any DLCS
If it's unclear, let me rephrase: What do you expect if you don't own Contact?
Heres the thing, I don't have contact enabled
And?
I don't expect it to work
...WTH
Don't post the same image twice, I know I know
Is the main menu, your current screen, right now?
yes
Remove ALL parameters from Arma 3 Launcher and try
Did you entered any parameters in Steam's launch parameters?
Did you ever moved ANY folders and files in Arma 3 folder manually?
Yeah, only mods or missions
Do you have contact folder in your Arma 3? And where it is?
Also where is your data_f_contact.ebo?
Right click on it
Done, what now?
And launch
fixed, thank you(My hopes dropped when I saw "Bohemia presents")
Really just said Arma and no context
Still, if anyone has a suggestion for this Im all ears
Bad mod/mission. Talk to the creator of it.
I'm the mission creator. First time in a long time.
But idk where this fn_showRespawnMenuHeader.sqf is supposed to be.
I can't find a "functions_f" file or folder anywhere
Maybe people in #arma3_scripting can help further.
It is probably a virtual folder that is created in memory after a PBO or mission-something is extracted by the game.
Looks like it's running 4k on a 1080p monitor or something
is there any way for me to manualy delete my settings file
thanks
only if you state what the problem is π
okay. im russian, and ill try to explain my problem.
today i bought western sahara dlc, after downloading i tried to launch it, but it had strange error - "the mission was interrupted - there is no downloadable add-on"
I tried to delete dlc and download it again, but it isnt helped
this is weird indeed! have you tried to verify the game's file cache, and are you sure you disabled all mods as well?
one interesting thing - i spawned car from dlc on Malden, and...
all mods are disabled, yes
I need help with this
O_o
there is something weird at work, indeed!
with what? this?
#arma3_troubleshooting message
remove your corrupted/old/ACEcompat mods
yes, i think that too
i tried to verify game files, and steam downloaded little file. huh.
2,7mb
I tried to @brave hawk I removed the addons folder in the ace folder
no, that's not what I said
What do i do then
don't remove the addons folder in the ace folder
remove a mod that is triggering this issue
you subscribed to some mod that generates this issue - which mod, it is up to you to find out
advice:
disable 50% of your mods
if it still does the issue, then the culprit is in the 50% enabled mods
repeat for these 50% remaining mods, etc
ok
IT WORKS.
IT.
WORKS.
w00t w00t w00t!! Enjoy the CDLC π I myself did!
huh, thanks!
Hi guys I'm a new player and I can't join servers when I try to join using the launcher It launches the game but just stops at main menu and doesn't do anything else. Everytime I try I get DNS errors on my browser (my whole pc loses connection because of that) and can't see any servers neither in-game nor on the launcher.
I hope I explained it right my English ain't that good unfortunately
Hello, I bought ARMA 3 today and installed it, but after launching nothing happens, I click PLAY and this is the only interaction from this game
And next to PLAY
try having the game fully closed, and check your Steam game cache
Steam file verification process:
Right Click on game -> Local Files -> Verify Integrity of game files
Mod repair process:
Open Launcher -> Right Click on mod -> Repair
The problem is that even the launcher does not turn on for me
And I checked the integrity of the files and there was nothing wrong
@brave hawk How do i find the mods that is causing the issue
Alr for the fifth time hopefully someone will actually answer me
Ive been having issues with port forwarding to host normal games such has coop but i do not have the issue with apex or sog
i was going to ask this in the #arma3_questions channel but I can't post images there, does anyone know why in the vehicle editor in the Editor I can only select Sand?
but in the virtual garage I have all the options
afaik only skins that are related to a faction from where you placed the vehicle can be used.
why placing a blufor vehicle and then slapping an opfor skin to it...?
doesn't make much sense, eh?
aw thanks alright that sucks, I found a work around of just saving it from the virtual garage and loading it from the edit vehicle thing, as that looks like the only way to get the UNA and ION skins on the non-CV Marshalls
any mods in play?
well, the error seems to refer to a magazine class that is not vanilla arma
verify your game installation
!steamverify
Steam file verification process:
Right Click on game -> Local Files -> Verify Integrity of game files
Mod repair process:
Open Launcher -> Right Click on mod -> Repair
It is possible to set it manually via some scripts
Having a problem with key binding.
I fly with a lot of flight gear (VKB Stick, Virpil Throttle), and I've noticed this issue in the past. Now it's being particularly difficult though and I can't get around it.
Every key I try to bind gets an input from my joystick and throttle to boot... to the point that I can't bind any controls without seeing several pop up. By the same token though, I -need- them plugged in so I can configure them.
I am having problems Zeusing and would like to see if someone could help me with it
https://workaround.org/getting-help-on-irc/
how to get help
Has anyone been seeing changes with blastcore explosion effects lately?
effects are completely different for radio triggered explosion vs regular impact explosions
is that last one not just ammo cooking off?
Anyone else having issues with the game crashing when selecting the MBT-52 Kuma in virtual arsenal with all the (c)DLCs enabled except contact?
well not really crashing, it freezes consistently, only had it crash once with an error about running out of memory
Make sure you have the correct ports being forwarded. If you don't know how, type ipconfig into your cmd promp, copy paste your default gateway into a browser, type in your password (Usually its just Admin, Password, some companies are different, there are lists if you look up your specific provider), then Port forward to either 2302 or 2303, your preference. Or, if you network allows UPnP, just check that box and you wont have to worry about it.
Arma 3's running at about 20fps, all graphics settings minimum.
Which..
Just doesn't seem right at all
It's only using 30% of my CPU, which is running at 4ghz (ignore the 3.3ghz, that's wrong)
is there a way to run the vanilla Sahara missions on a dedicated server?
Got to 22fps after moving to my SSD. Still strange
@swift mist i did all that and i made sure everything was done correctly yesterday and i still have the issue
Then the issue is unlikely related to port forwarding. I don't see how (c)DLC make a difference. Please describe those issues better. If details are lacking then people tend to not reply to it.
Port forwarding setup failed
ΒΏSpanish?
No other languages than English. Sorry, it's the rules.
π¦
Hey guys got a quick problem, I set up an artillery support module that when tested on my end works completely fine, it's bound to a selection of units that are allowed to use it while other slots can't. I load it up onto my dedicated box and launched, and now the artillery command doesn't even show up? Can I get some support on this
hi i have a problem
i'm on the blackfoot down mission
and I need to plant a charge on the helo
but i don't have one
and when the game tells me to find one at the body
the body doesn't have a charge
Different body? Or is the charge hidden in a backpack perhaps? ( I can't remember where it was, played it ages ago.)
you should have picked up a charge automatically from the Armoury along with the mines
Dont suppose anyone knows whats causing this issue?
this animate [""ramp_top"",1]; this animate [""ramp_bottom"",0.7];;
this animate [""ramp_top"",1]; this animate [""ramp_bottom"",1];;
this animate ['door_1',1];;
this animate [""door_2_1"",1]; this animate [""door_2_2"",1];
Trying to make the C130 have doors & ramp open without player needing to do it but getting the error there is a missing ] somewhere, statements are straight from the config
Hey so I had a problem with Arma 3 for some time now regarding movement each time I'm Infantry and on foot my character and other players/NPCS start going prone and crouching and playing dead for some reason I don't know how to fix it I literally Validated my game files and reinstalled Arma 3 twice and still no fix.
I tried adding a video in here I can't since it's to powerful.
Oh hey soupz lol.
Well, you can maybe post a link to it.
First order of business is to make sure you don't have any mods applied to the game, and try it in a vanilla mission/empty editor environment.
It's vanilla
Hold on I'll try to get a link
Helloo
Sorting it now with him.
video not available
Improved one my bad
Just so y'all know I'm not touching my keyboard at all
For Movement
No clue, but that is one sick puppy!
Don't lower the graphics, use Autodetect
anyone know wut is going on here? no mods apart from client side ones. (new dlc if that makes a difference)
looks like sahara cdlc is not loaded
Anyone know a fix to this?
https://community.bistudio.com/wiki/Profile
Lead to here, find AnimDataCache and delete the folder
Thank you so much Iβll take a look at that in a bit
Is there a pathway?
What?
Where can you find it?
It should be around there. You can use search in Explorer
I used search on the Explorer no results
Which folder you see right now?
Hey im having a problem with my game. When I launch the game via steam it says game executable not found, repair through steam client. The launcher will open up but it constantly is loading. When I click the play button in the launcher it throws the same message. If I go into my steam directory where the game is downloaded and I launch the launcher it throws the same error message. However if I launch arma 3 exe in the directory it launches the game up no problem.
That makes me believe there is something wrong with my arma 3 launcher and the game locator file that exists on the launcher. I have tried deleting the dllβs and verifying the game cache. I have even tried to find parameters that let me assign the game path, but to no success. Any suggestions would be great. Iβm currently reinstalling the game as we speak.
I should also mention that the game is installed on my b drive.
It would not launch so I used the steam library function to move the game to my c drive and the problem no longer occurred. However I donβt have enough space on my c drive for the mods I wish to use along with the base game. That being said I absolutely have to use my b drive.
check to see that your b drive doesnt have any issues
if that doesnt work, maybe uninstall and reinstall arma onto your b drive
Noticed that my arma was being installed into the wrong directory on my b drive. I think it was causing the game locator to go weird. If I find a fix, Iβll let this chat know.
Can these truly wireless ear buds enable me to both listen at full audio quality but still speak through the ear budβs mic on PC? Like discord chat or voice comm in PC games. // Fo example I know my ancient WH-1000X M3 headset is either/or for example. Either listen at best quality and lose mic ability or gain mic ability but lose audio quality. // Does anyone happen to know what things are like in 2021/2022?
Hello, I am having the following error when trying to use TexView.exe
texView
---------------------------
Missing registry entry HKEY_LOCAL_MACHINE/Software\BIStudio\TextureConvert.
Verify application is installed correctly .
---------------------------
OK
---------------------------
I have launched via steam, verified integrity of a3tools, uninstalled/reinstalled and also tried restarting.
Every time I try to launch my arma 3 launcher it does this
How do I stop this from happening
iirc you should just repair ace
I tried repairing ace
@steady hawk what do you suggest I do
So what should I do to find
how do i find out which compat it is for the ACE @patent kettle
which mod
we dont know what mods you run @ocean nacelle. its some ace compat mod you have, not more can be said.
i have this error
Did you read the title of that message box that tells you to contact the servers admin?
Or the last sentence that tells you to remove mods that aren't allowed?
I checked @uncut trellis I run JM Mods and as well RHS
Somewhere there you got some sort of old ace compaibility mod that breaks it
having issues when flying helicopters. camera remains locked in this position when not freelooking. same thing happens to other helis, but camera is in a different position for each one
hey guys im trying to play arma 3 and i get this error 0x0000DEAD i dont know how to fix this were can i find my log to send my info over to the discord and get support to see what the issue is
anyone there
Read the error message that you click away before you get the 0xDEAD one
then its a problem with ace
you most likely have a mod that is incompatible with ace
idont know what mod it is is there any way i can send a log
here is one of my logs if its the wrong one let me know or if there is any errors let me know about that also
anyone know how to fix my issue? #arma3_troubleshooting message
try without mods first
@maiden ingot is there a question or explanation to go along with the pic?
seems pretty normal pings for US servers for someone not in the US
i'm not from the US
@haughty finch Im pretty sure you are not Danny

and in case Danny is from US he maybe needs to contact his ISP if there is problem with the connection
alright
aand you sir do not seem to have talked on the channel recently soo im curious what made you think I was answering you
what
yes
idk man i'm not from the united states
i wonder how to make game ron good?
ron?
alirght. have a nice day.
you too
run i mean sorry i apolgise
i sent my log anyone able to help me
yes i try help
ok
where did send?
you have broken ace compat mod in you mod list
yes i think so to
ok how do i fix this
maybe remove
you just need to figure out what mod it comes from and remove it
probably some old modpack that contains non updated reuploads
@uncut trellis @astral junco this is the error msg i have and i dont know wich addon it is ErrorMessage: File z\ace\addons\field_rations\CfgVehicles.hpp, line 21: '/CfgVehicles/Land_WaterBarrel_F.XGVAR':
like I said its some ace compatibility mod. multiple people have had that before.
ok
im having a friend that keeps crashing when entering a modded vehicle (rhs bradley)
it gives him this error message
We have hacker ringing that damn alarm again on US#01w Warlords
would i figured out my issue thanks for the help guys
what mod was it? @misty hinge could help the next one who asks the same thing
@tiny imp we need moderators on Warlords US#01 East and West, someone is hitting that damn Siren again
on both servers
The only tip i can give you is to try and turn all ACE compat mods off then test, then turn half of the mods on and test, ect. should be the fastest way to narrow down the issue
On a lot of my planes when I am landing and put my landing gear down it makes my rudder have a compete fucking spaz attack.
Describe precisely please. Also what Mods you use?
Is anyone else affected by this or just them? If just them, tell them to make sure that RHS is fully updated and isn't missing any files by clicking on RHSUSAF, then the three dots next to the bin, and "Repair".
Thanks
Hello, there is a server that uses textures, anti cheet stolen. How to fix this problem
textures stolen from you? @fringe salmon
Yess
from your mod?
No, basic mods
Yes but textures are used without my permission
are the texture part of the mod?
So the mod uses it with permission but the server without permission?
Yess
yes to both of us?
How so?
Horrible goat asked if the textures were part of the mod.
I asked if the mod has permission but the server doesnt.
you only answered once so i was wondering what question that was in response to. 
I textured the basic mods, and they robbed me of those textures.
How do I turn off the ACE Compata
@fringe salmon Sorry its still not clear to me, did the mod steal your textures or the Server?
The textures have been stolen
That exile server needs a mod which you have not loaded. It is probably the mod that is known to the worksop by that number behind the @ : workshop link: https://steamcommunity.com/sharedfiles/filedetails/?id=1814297223
ok thx
How do I fix my ace compats so I can play my arma 3
you either find up to date ones or reach out to whoever made them to update them @ocean nacelle
or disable them
ok
excuse me im trying to install mods but it keeps saying "data file too short ect
!steamverify
Steam file verification process:
Right Click on game -> Local Files -> Verify Integrity of game files
Mod repair process:
Open Launcher -> Right Click on mod -> Repair
^use this to fix the Mod
it says that even when mods are not active
"data file to short D:\steamlibary\steamapps\common\arma 3|workshop@rhsafrf\addons\rhs_inventoryicons.pbo',expected
but i dont have modsa ctive whne it said that
Well try above whatsoever
ok im sorry but may i ask how do you Verify Integrity of game files
Literally written above
yo has anyone had any problems selecting several units at once in zues lately? ive had this problem since 2.0 and it seems to only be me having the problem
I have a weird issue in player-made missions from the workshop:
The missions that have a working support fire (e.g. you can call supports via the radio menu) more or less suddenly have a discernible "lag" between selection of the support asset, ammo type and shell count.
And sometimes, the next menu (e.g. shell count, or asset select) in the radio menu does not show up at all.
I had this happen across different MP-missions from different authors, so im thinking its some mod of mine thats doing it.
Probably is a mod then, try removing 50% of your mods, check if it's fixed and if it isn't, then remove another 50%, etc until you find the troublesome mod
Ill try, thanks ^^
anyone know how to fix this issue?
https://forums.bohemia.net/forums/topic/236844-character-stuck-in-dead-animation-while-flying-heli/
While flying a helicopter, my character is placed in the wrong position, which means the cameras also in the wrong position as well. This is the same for all helicopters. For the little bird in particular, my character acts as if its dead when its not. I believe that this issue is not related to ...
any mods?
Hello! I have posted a help topic in the troubleshooting section of the BI_forums. I have come here in hopes of getting advice on how to fix my arma 3 tools publisher. I have .rpt files. I will post the files if and when anyone needs. Here is the post. https://forums.bohemia.net/forums/topic/236842-help-arma-3-publisher-crashing-at-startup/?tab=comments#comment-3450395
Hello! I have an issue that is causing Arma 3 tools Publisher to crash 1 second after it starts. PLEASE HELP ME. If you cant, please point me to the place where I need to ask. The error message the repeats in the arma3Publisher.rpt Spoiler 2021-11-23 12:01:55,047 [FATAL] 1 (:0): SharedResources.A...
β¦?
Try this:
#arma3_troubleshooting message
i am getting cloud file provider not running how to fix
remove OneDrive from your PC if you're not actively using it
Hello, Ive been having a problem where everytime I try to edit my profile in ArmA 3, it crashes my game. I have validated my files and have even reinstalled and changed the firewall permissions for ArmA 3 but it still crashes whenever I try to edit my profile. I even deleted the profiles but it just ended up removing the profile folder from my documents. Anyone know how to fix this? I cant play ArmA with my unit until i fix this.
Iβm having some issues with the Zeus interface.
For the longest time, when I place any objective modules, I canβt select OPFOR for the objective. BLUFOR and INDFOR are both options as well as civilian but there is no option for OPFOR
@fringe salmon when you edit the objective it doesnt look like this? What build do you play on?
It looks like that for the custom objective. The other objectives have the OPFOR select missing.
Unsure of the build
Yes
Without the red OPFOR
The literal only thing missing from it is the OPFOR diamond
Huh. I changed my Zeus module from INDFOR to Civilian on sides and now I can select OPFOR again. I wonder why thatβs happening
no clue but if it keeps happening, maybe check without mods?
It seems to be just the side my Zeus interface is set to
If you can reproduce it without mods consistently, please make a FT ticket with clear repro steps or a video so we can figure out whats going on. 
any idea how to troubleshoot this? same issue with other controls
How can I reactivate my microphone? On a pubZeus as admin and got good mission, don't want to restart my game.
see in your audio options perhaps
change of input devices still require a restart iirc
It worked before, microsoft or OBS picks audio up
see last
Well there was an update to improve that, there is a "refresh audio device button"
just flipped up my mic once which mutes it
the update included on the fly changes of output devices
arma wont launch for me what
says "ready to launch" but wont launch. when going to the steam page it says "downloading workshop 0%"
how do i fix this
Cancel the download if you can and attempt to reopen the launcher. Don't touch anything until it opens, if it doesnt then verify the game files.
can't join a server that i'm in
fully downloaded their whole preset
other people joined that have also installed the presets

For me itβs always saying either βFile z\ace\addons\fortify\CfgVehicles.hpp, line 28: /CfgVehicles/: β(β encountered instead of β{β or
βFile z\ace\addons\fieldrations\CfgVehicles.hpp, line 21: β/CfgVehicles/Land_WaterBarrel_F.XGVARβ: β(β encountered instead of β=β
every time I try to start the play from the launcher? How do I stop this
What do I do this about?
You are loading some outdated ACE compat mod, stop loading that bad outdated mod.
Anyone can help my arma 3 launcher wont start but i can open the game by clicking arma 64x
So me and my friends have had this problem for a while. For some reason when I put on mods some my friends get stuck on the loading screen while others don't. Everyone's mods are the same, and everyone's mods are updated when trying to join my Zeus mission. I MAY have found a way to solve this by simply waiting until everyone is in and readied up on the lobby screen before clicking play and loading into the map. I haven't had time to test this more but has anyone else experienced this and has anyone else found a fix?
I did have zeus enhanced(ace compatible version), ace, and achilles all running together
can you tag me if you find a fix
I shall
There are some broken mods which can cause infinite loading screens.
You'll hear sound in the background behind the loading screen
if you have a debug console, global execute endLoadingScreen
Yes that's exactly the problem, they hear sound but they can't load in. Does that command just boot then out of the server, what does end loading screen do?
endLoadingScreen... ends the loading screen.. π
i cant open the launcher pls help
Any more detail?
"Doesn't work" isn't that useful
How do I turn off friendly name tags on my Ubuntu Arma 3 server?
I've made a custom difficulty in the server.Arma3Profile file
I've got it to use a config
I'm just not sure which because it entirely ignores my settings
I'm looking for opinions/suggestions from other server owners. What values do you use for the following on your server.cfg?
maxPing
maxPacketloss
maxDesync
disconnectTimeout
I am aware of the Arma 3 standards, but we are running a global server which has people playing from almost everywhere. We do not have a high enough pop to run more than one server at the moment, but I'm looking for suggestions for the best overall experience.
I cant host because it says my portfowarding failed, how do I fix this?
!localhost
To host a server or a game session locally, you need to make sure first that your WAN address / external IP uses the IPv4 protocol!
Check your routerβs status page in the settings to confirm. (If in doubt, ask your ISP, Websites like βwhatismyip.comβ give you a false positive!)
Local servers and games can not be hosted on an IPv6 network, or IPv4 via DSlite tunnel!
https://www.avg.com/en/signal/ipv4-vs-ipv6
Once you have confirmed that your connection uses the IPv4 protocol, you need to manually open / forward the ports 2302-2306 UDP (https://community.bistudio.com/wiki/Arma_3:_Dedicated_Server#Port_Forwarding)
See your routerβs manual on how to do that, or ask google: β<your router model> + port forwardingβ
So we keep getting randomly this No player found for channel 2083868136512 - message ignored spammed in our logs and absolutely trashing our server FPS. It isn't every restart or any pattern. I have no idea how to fix it.
TIA
https://ghostbin.com/r4W36
Ghostbin is a website where you can store and share text online.
Opened, ARMA today and got the "welcome" message for new players, all my loadouts and settings are gone. My missions and compositions are still there though. Any Idea what happened/ how to fix it?
Your profile may have gotten corrupted, if it does that it resets
can happen when you alt+f4 Arma while its saving your profile, or if it crashes while saving, or if it grows too large
corrupted profile files are gone for ever... mostly
dang
yeah just back up your profile in the future
Every time I host a server it doesnt show up for my friends. I have it port fowarded TCP & UDP through my router and i also have TCP & UDP Input & Output in my firewall.
A player in my server have this problem: The chat lines (side, group, vehicle...), on botton left, dissapears. People talk and he don't see. If he go to lobby and join the server again, chat lines appears again.
New week, new cries for help - what is 0xC0000374 status_heap_violation & how do I fix it?
It's not even written out on the Biki(
Finally got something out of the rpt for once by doing a little trickery, and what I got is 4k error messages in 1 second, all spamming this 2:01:47 Unsupported format palette 8 2:01:47 Bad texture format in GetPixel
I crash when I join the server and press respawn, if I'm tabbed out I don't crash up until I tab in
How do I find this?
βFile z\ace\addons\fortify\CfgVehicles.hpp, line 28: /CfgVehicles/: β(β encountered instead of β{β
How do I fix the needing keys for every damn server please I need help esp with the fking cba a3 garbage
!steamverify
Steam file verification process:
Right Click on game -> Local Files -> Verify Integrity of game files
Mod repair process:
Open Launcher -> Right Click on mod -> Repair
Use the Mod repair process to fix the CUP Terrains @rotund panther
what happened to the ace interaction menu? also idk if this is the right place for this but still
not especially but since ACE is a mod and something happened its probably you either not loading ACE or loading something else that breaks ACE
Unload CBA to join, I guess
lol time to try
the easiest way is to join a server from the launcher, as it will download/unload everything it needs
could very well be this "finders keepers" uses some private mod set that you just dont have
true
but this is with all servers for me
I'm a problem solver type of guy but my resources are running thin
@brave hawk this could be the problem of old PBO signatures remaining in the mod folder, Steam or Arma 3 will never delete them, because they are unknow files (user files, they will say), and player will never be able to play the mod until he remove all those old PBO signatures manually, he can try to delete the mod folder in Steam workshop and download again. Only fix or update will not delete the troubling files.
Understand?
Have seen many people going crazy because of that bug. Steam bug? Arma 3 bug? For years.
There is people that quit a mod forever or for a long time, i helped some of them.
@plain rapidsβοΈ
finders keepers folder
how do I find that?
Launcher mod option
good to know, thanks π
C:\Program Files (x86)\Steam\steamapps\common\Arma 3!Workshop
delete that last folder?
no
use the option Open Folder in Windows Explorer
okay got that
Alright let me try
Delete the problematic mod folder
Hmm I'm still not sure which folders I'm looking under I have already deleted all mods
and unsubbed and that didn't work somehow
delete CBA folder
Sounds good π here we go
then just load the game again
why does my folder say !workshop instead of workshop
and its hidden but shown
Before run the game, download CBA again
the !workshop folder is symlink structure to the steams internal file structure where it keeps the downloaded mods
deleting anything in the !workshop folder does nothing
nothings working I have been at this shit for 2 hours
those are just shortcuts to the actual folders somewhere else
oooh