#arma3_troubleshooting

1 messages · Page 129 of 1

fringe salmon
#

and its 10x worse PC than mine

#

explain please

#

like im getting 60 fps and then massive frame drops

wise barn
#

install arma on a SSD drive

fringe salmon
#

im sure this guy didnt had it on SSD

wise barn
#

so what...?
arma on HDD has a higher risk of stuttering than on SSD

fringe salmon
#

but he didnt stutter

#

he had a worse PC than mine

wise barn
#

so... what...?

#

you got your answer

#

also: HDDs can vary a lot also

round stirrup
#

Hello. Whenever I try to host a multiplayer game, I keep getting the 'port forwarding setup failed. Please check UPnP/IGD settings on your router.' error. I checked my router's settings and it says UPnP is enabled. Can someone help me please?

wise barn
#

open the arma ports manually

round stirrup
#

How do I do that?

wise barn
#

google is your friend...
find out what ports are needed and how to forward them ports on your router model.
idk what model you have... if you name me the model, all i can do is to google for a tutorial, which you can do also 😉

round stirrup
#

Alright, thanks

wise barn
#

👍

near hollow
quaint jewel
#

units goes down from time to time

near hollow
#

no worries thanks bud

wise barn
#

@spark basin do you want help or not?

spark basin
#

hi

wise barn
#

what's the issue?

spark basin
#

i want to play with the team arma 3

#

but i dont have it on steam
its expensive to buy in my country 😔

wise barn
#

then you need to save up some money

spark basin
#

😭😭😭😭😭

wise barn
#

¯_(ツ)_/¯

#

if you came here to ask for a copy, not gonna happen

spark basin
#

$ exchange very high in our country lebanon

wise barn
#

sorry to hear that, but nothing we can do here

spark basin
#

oki

wise barn
#

👍

spark basin
#

🙋🏻‍♂️

sweet ingot
#

I need some help with my arma 3 game. It always seems to crash randomly in the middle of the game with the "STATUS_ACCESS_VIOLATION"
Ive done so much research and ways to fix this issue and I cant do it.
My pc is a ryzen 5 3600x
32gb ddr4 ram @ 3200
asus strix rx 580 8gb

#

I play on 1Tb m.2 ssd

quaint jewel
#

Like the Arma launcher says, create a report and make a ticket on the feedback tracker

sweet ingot
#

Do they still have support? It's an old game and I doubt sending a ticket will do anything

quaint jewel
#

Who is they?

#

Old? Arma is still getting the usual updates every few months

sweet ingot
#

Well I hope they could fix the issue then. Must be something with the profiles because it only started crashing after making a new one and deleting them isn't redoing the problem

quaint jewel
#

Yeah just make a ticket and I'll look at it on monday

#

send me the link then

sweet ingot
#

alright. next time ill get the crash report, ill send it. I'm like reinstalling the game for the 3rd time

worn parcel
#

sooo... can someone help me

wise barn
worn parcel
#

well when i try to join a Official server it says i need some kind of a key or something with i have to sign a key

#

and its killing me

wise barn
#

make a screenshot of the exact message, upload it to imgur or any other image hoster, and share the link here please

#

i need some kind of a key or something
nothing we can work with

worn parcel
#

why cant i just take a screenshot

wise barn
#

you can not upload images here

#

(restrictions)

#

just upload the screenshot somewhere

worn parcel
#

mmmmm okay

#

its says Files (the files) are not signed by a key accepted by this server. to play on this server. remove listed files or install additional accepted keys

wise barn
#

the key is to know which files
either you have mods loaded OR some vanilla files are corrupted.
this is why i need a screenshot

worn parcel
#

i dont have mods and its the sounds_f_exp.pbo

wise barn
#

verify your game installation via steam

worn parcel
#

how?

#

sry if i sound stupid

wise barn
#

google is your friend 😉

worn parcel
#

im doing it now takes some time tho

midnight oriole
#

gorgla

worn parcel
#

btw are you a veteran in real life

wise barn
#

yes. a meme war veteran 😄

worn parcel
#

okay

#

i thought it was war veterans

wise barn
#

i never served in military.
the veteran tag is not related to actual service

worn parcel
#

okay

midnight oriole
#

me, me war

worn parcel
#

are u from the us audio

wise barn
#

nope

#

europe

midnight oriole
#

are you from the europe audio

wise barn
#

that's what i just said

midnight oriole
#

i dont know what im saying

wise barn
#

figured

worn parcel
#

same

#

what country if i may ask

#

audio

wise barn
#

the one that usually has no fun, and if we do, many peoply die 😄

worn parcel
#

it said that one file didnt get downloaded and its downloading it now hope it works

#

oh thats not good

wise barn
#

just kidding. we have fun. we find joy in work, work, and..... what did i miss...? oh right...: work

worn parcel
#

the uk?

midnight oriole
#

uk isnt a country

#

england, wales, and scotland however

worn parcel
#

i prefer calling it the uk

midnight oriole
#

im referred to as bri'ish which can be annoying at times as its basically mocking my accent

worn parcel
#

oh im sorry

#

are you from scotland?

#

or wales

midnight oriole
#

no, im from england, yorkshire

worn parcel
#

cool

weary sky
worn parcel
#

oh sorry mate

midnight oriole
#

i know, just carrying on a conversation

#

thats trailed off somewhere

unborn geyser
#

hey

worn parcel
#

btw what is the Official server is it servers owned by arma or...

wise barn
#

maintained by bohemia interactive

worn parcel
#

yes?

#

oh okay

halcyon lichen
#

Hey so

#

When ever i start up my server it always displays 2 servers on the server list so im not sure if im running 2 because i only open the arma 3 server exe once

#

and yes i did it with a bat also

#

and they dont display as the name i gave it they display as my pc name

digital pendant
#

well that last part usually means it didnt load any server.cfg (config) file

halcyon lichen
#

yw

#

ye

#

it loaded a mission when i had it disabled

#

@echo off
"D:\steam 2020\steamapps\common\Arma 3 Server\arma3server_x64.exe" "-profiles=D:\steam 2020\steamapps\common\Arma 3 Server" -config=CONFIG_server.cfg -port=2302 -world=empty

#

im new to arma 3 servers

#

is that right

fringe salmon
#

@halcyon lichen if you’re running Hamachi it will show two up on your local network

halcyon lichen
#

what is hamachi

steady hawk
worn parcel
#

now i cant even play arma 3

steady hawk
#

Sorry to hear that

worn parcel
#

i get an error

steady hawk
#

Pro tip for you: “I got an error” means nothing for everyone else. Write what is happening and transcript the error preciesly

worn parcel
#

idc

steady hawk
odd solstice
#

I can’t get in to any games on arma 3

uncut trellis
#

running any mods?

#

then likely mods

restive trail
#

Ahhh

uncut trellis
#

that would likely be the cause of your problem

#

the default single player campaigns are not designed to be played with mods

#

well you have likely started it with ACE on

#

which makes your save tied to ACE

#

dont think there is

restive trail
#

Maybe by editing your save file

uncut trellis
#

I dont think you can

restive trail
#

Not sure, never tried it. Just an idea.

#

I've removed mod dependencies from mission.sqm files. Not from save files tho, never even looked at those

uncut trellis
#

Im pretty sure they are not accessible like that

restive trail
#

Ye, restart is unfortunately your best bet. I recently restarted Old Man too, to get rid of all the mod dependencies. Been running it for a few days without issues (mostly)

#

Mods can and will break missions. But Old Man will break mods. I had advanced movement stop working after playing Old Man for a while, for example

#

Best to play it without

#

Good luck!

uncut trellis
#

@odd solstice
what do you mean you cant get into any games?
do you mean online games?
Does single player game start normally?
Do you launch the game with mods?
if online games = yes, do you try to join servers from in game server browser, or do you use the launchers server browser?

odd solstice
#

Thanks for responding I have sorted it now

uncut trellis
#

👍

#

happy gaming

keen frigate
#

so the guys telling me i need to go to the place but the message of the place disappeared

#

on the map

uncut trellis
#

you will need to describe the problem in more detail than that.

pine kite
#

Which guys, which place, which map? Which scenario/mission/server?

#

As Horrible Goat said, in #general_chat_arma , assume we know nothing about what you do/did!

#

(which is the truth)

rich oar
#

Hi I’m having issues with most of the mods I’ve downloaded. I downloaded a bunch of mods. I’m new to the game and modding all together. So I downloaded some British weapons and scenarios, dayz, 13 hours and zero dark thirty. And I can’t get any of them working. When I go into scenarios it will come up in the list of maps the scenarios I wanna play, but when I click on them they don’t work. The only one I’ve got working is the British weapons when I’m on editor mode. And when I do select load mods it fires me into the contact menu.

mental river
#

mods typically add some stuff

weary sky
#

Sounds like you try to load all mods at once, which breaks a lot of stuff

mental river
#

they're hardly ever total conversions

rich oar
#

I’ve tried both ways doing them all at once and doing them like one at a time depending on the scenario I want to run.

mental river
#

what "scenarios" are you running?

rich oar
#

Trying to run a day z private server for just me and a mate.
And I tried to run 13 hours scenario aswell.
The last one was a British patrol scenario I think it was British vehicles,uniforms and weapons. But I couldn’t get any to run.

mental river
#

And what is the problem? Error?

rich oar
#

Yeah it was something like that I’m not on my pc yet. But it was essentially saying I couldn’t run them. Or think with the dayz one it was like hollowed out the play button so I couldn’t click it

mental river
rich oar
#

No arma 3

mental river
#

Arma 3 doesn't have any DayZ afaik

uncut trellis
#

it does

rich oar
#

There is a mod in the workshop I downloaded

uncut trellis
#

there is a port but Im not sure if it was properly finished ever

#

you will have to come back to this question when you are on your computer

#

exact error messages are required to debug problems

mental river
#

but yes, post the full error

rich oar
#

Okay I’m on in an hour I’ll come back and quote the stuff.

@mental river one of them said something like u don’t have the dependencies to use this or something to that affect I didn’t understand what that ment either

uncut trellis
#

it means you dont have all the mods required

mental river
#

it lists dependencies on the right

#

subscribe to all of them

rich oar
#

Do all mods have dependence’s

uncut trellis
#

no

earnest grove
#

Hey, my friend has an issue where his ArmA 3 will randomly crash whenever an engine starts from the RHS AFRF or something of that kind. He has reinstalled the mods, reinstalled Arma several times with the same result and went through every change, switching x64 to 32 or changing audio bitrate, giving my working versions of the mod to him, etc. without any change. I have an RPT if that helps

#

And it is only him, 15 other people can play just fine

rich oar
#

@mental river this is the notice I’m getting when I’m trying to launch dayz mod. Steam_cur_sp.stratis\mssion.sim/mission/entities/item 46.type vehicle class ryanzm-module custom difficulty no longer exists

weary sky
#

looks like you're missing Ryan's Zombies and Demons mod, or the mission is that old that it's using stuff not existing anymore

modest robin
#

yeah looks like its missing a mod, a mod updated and removed/renamed files that a mission needs, or the mod is just corrupted and needs to be fixed/reinstalled

rich oar
#

I didn’t realise u could join internet servers. There’s day z ones. But I wanted to run my own so I didn’t need to worry about getting shot and robbed

modest robin
#

are you running it through the official arma 3 launcher or another launcher? The arma 3 launcher will load all the mods for you but some other launchers require you to manually install mods for servers

rich oar
#

Aye was doing official to begin with

digital pendant
#

^ port forwarding

#

^ port check result

#

port check was done with firewall off

#

this has been driving me up the wall

inland vortex
#

I've been working with sector control and the spawn AI modules. I've gotten BLUFOR to move to and capture uncontrolled/hostile zones, but with the exact same setup, OPFOR just does't get orders and just stands around. Any suggestions?

eternal rain
#

do you guys know what a "CAAModerna_client" is, its a thing im missing

wise barn
#

one or more of your mods might be corrupted

#

open the arma 3 launcher and repair suspicious mods one by one

eternal rain
#

i did

wise barn
#

¯_(ツ)_/¯

#

star wars mods by any chance?

#

@eternal rain

eternal rain
#

idk

wise barn
#

how can you not know what mods you are launching?

proven thistle
#

now there's too many channels for me to figure out which i should ask this

#

but anyway

#

i'm trying to use RHSUSAF, and it's just not working

#

i have it checked in the launcher(same as the other RHS mods) but it just doesn't appear

#

in-game

#

to be precise, i'm opening zeus and there's no new unit types to spawn

#

hold on a second

grim tinsel
#

make sure that the game master module has the option to show all addons enabled

proven thistle
#

i was just using the default 48+2 zeus

#

but i did find the tanks

#

just not... occupied versions of them

#

alright does anyone have a mod for RHS that makes the Zeus spawner have occupied RHS vehicle available

#

wait

#

nevermind

#

problem solved, default arma just has the zeus module stupid

inland vortex
#

I really need help with the sector control + spawn AI modules, I’ve literally mirrored a spawn AI area on the other side of town and set it to OPFOR but despite it being exactly the same, units just don’t move to capture sectors

#

Last night I tested it with BLUFOR units and the same thing happened, the original setup worked but the other one didn’t

inland vortex
#

I've made some progress by syncing both Spawn AI modules to the same sector tactics module but then they just get the exact same waypoints and rush to the same spot instead of capturing other sectors

timber heron
#

Why does my game is always crashing ? I have a ryzen 5 3600 an rtx 3060 ti and 16gb ram 3200mhz. And every time I see a véhicules or parachuting and stuff, my game crash. I can’t even do the prologue !

uncut trellis
#

do you have USB headset/audio device?

#

if yes, try unplugging and if possible using analog audio

summer moth
#

OxC0000135 - STATUS_DLL_NOT_FOUND how do I fix this it occured in the launcher when I tried to start the game, and it causes my game to crash

wise barn
#

select your language for vcredist_x64.exe

summer moth
summer moth
wise barn
#

what?

summer moth
#

for the file checker tool, I'm pressing the command runner but nothing is happening

wise barn
#

¯_(ツ)_/¯

#

idk

#

never used it. just pointing you directions

random acorn
#

Has anyone ever managed to get Epoch to function on Steam Arma3? I've tried multiple times, and every time I end up with missing items, which causes crash. I once was able to get it to open, after several missing items, and there was no server. Now I can't even get Old Man to function, after a complete uninstall and deletion of all folders.

#

I have re-installed 4 times now, and I have verified files.

uncut trellis
#

well yes basically

random acorn
#

I'll have to find that.

uncut trellis
elder grove
uncut trellis
#

@elder grove you can backup your old one

#

just copy it somewhere

elder grove
#

ill just make a new one

#

it wont interfer i dont think

uncut trellis
#

dont know

elder grove
#

ill try just making a new one if that doesnt work ill move it out of the arma folder

oak hamlet
#

I have a problem, i got a dedicated server with a cfg and whenever i put my pbo on it just sits on the loading screen for the map it was on it never loads

uncut trellis
#

does it work without mods?

elder grove
#

ik what it is

#

i used to get this

#

basically the mission file u have on the server isnt able to load because it has an asset on it from a mod which isnt on ur server

oak hamlet
#

yeah i tested it with no mods what so ever and it works fine

elder grove
#

do you have acess to ur server logs like while the server is running

#

?

oak hamlet
#

No i dont

#

I bought a server from serverblend

elder grove
#

ah

weary sky
#

so you HAVE access to the logs while running the server, and you can download the log files to see them at full

elder grove
#

i still get kicked for the same reason

#

ive tried literally everything im just going to do a clean install of windows ive spent all day trying to fix this and im all out of patience,

oak hamlet
#

So what should i do?

elder grove
#

get a host that actually shows you logs so you can figure out what ur issue is

#

we cant help you solve it unless we know exactly what the problem is

oak hamlet
#

ill look into it maybe its somewhere

#

would it be the web console

elder grove
#

yea

#

run the server and look at that and see what error it gives you

oak hamlet
#

Can i send screenshots here?

elder grove
#

dont think so

#

you can send links to screenshots tho

#

use imgur maybe?

oak hamlet
#

could i send to your dm?

elder grove
#

ye

safe sierra
#

Could someone help please I'm having a slight issue hosting coop missions.

wise barn
#

you could start by explaining what the issues are

safe sierra
#

It's hard to explain but I hosted a server and tried running a mission but there would be no player selection but when I tried again on lan or with a closed port it worked fine.

wise barn
#

modded or vanilla?

safe sierra
#

modded

wise barn
#

that's your first issue. troubleshooting starts with vanilla

#

make sure that the foundation works before building a house on top of it

safe sierra
#

Ok so I need to use a mission that doesn't need mods right?

wise barn
#

simple...
run the game vanilla (no mods at all)
open eden editor
place a hand full of characters and make tham playable
save as multiplayer
launch server with demo mission

safe sierra
#

Ok I'll do that now.

#

Ok I made a mission with 4 playable ai and saved it I started it on the server and It shows me that there's no sides or ai

wise barn
#

hmm...
to be clear: hosting a mission via your game, or a dedicated server?

safe sierra
#

game

wise barn
#

launch a BI made vanilla mission

safe sierra
#

Same issue

#

No ai to choose from

#

and when I press ok it says "No player assigned!"

#

Every mission and every map has the same problem.

wise barn
#

crazy
try to verify your game installation via steam. no clue if this has any effect, but... well...

safe sierra
#

Ok one second.

#

nvm brb this is gonna take a long time.

safe sierra
#

I tried validating arma but it's stuck at 99%

steady hawk
#

Just wait wait and wait

safe sierra
#

ok

safe sierra
#

Ok I validated the game

#

And the problem hasn't changed.

wise barn
pine kite
oak hamlet
#

22:06:48 Warning Message: Size: '/' not an array
22:06:48 Warning Message: No entry 'bin\config.bin/CfgAmmo/AirTarget.soundFakeFall'.
22:06:48 Warning Message: Size: '/' not an array
22:06:48 Warning Message: Size: '/' not an array
22:06:48 Warning Message: No entry 'bin\config.bin/CfgAmmo/AirTarget.tracerColor'.
22:06:48 Warning Message: Size: '/' not an array
22:06:48 Warning Message: Size: '/' not an array
22:06:48 Warning Message: No entry 'bin\config.bin/CfgAmmo/AirTarget.tracerColorR'.
22:06:48 Warning Message: Size: '/' not an array
22:06:48 Warning Message: Size: '/' not an array
22:06:48 Warning Message: No entry 'bin\config.bin/CfgAmmo/AirTarget.explosionType'.
22:06:48 Warning Message: '/' is not a value
22:06:48 Warning Message: No entry 'bin\config.bin/CfgAmmo/AirTarget.simulation'.

Getting a bunch of these?

#

2:06:55 Error position:
22:06:55 Error Local variable in global space
22:06:55 Global namespace not passed during: false
22:06:55 Global namespace not passed during: false
22:06:55 Error in expression
22:06:55 Error position:
22:06:55 Error Local variable in global space
22:06:55 Global namespace not passed during: false
22:06:55 Global namespace not passed during: false
22:06:55 Error in expression
22:06:55 Error position:
22:06:55 Error Local variable in global space
22:06:55 Initializing Steam server - Game Port: 2322, Steam Query Port: 2323
22:06:55 Steam AppId from steam_appid.txt: 107410
22:06:56 Connected to Steam servers
1:03:35 Can't find a mission collection / mission with template name: 'TRAININGSERVER3.Malden', skipping to next mission.
1:03:36 BEServer: registering a new player #596245027

weary sky
#

looks like a mod which has bad configs...

oak hamlet
#

im using warhammer mods, are most of them issues?

weary sky
#

no idea which mod is causing the issues; but it's not uncommon for such mods to cause issues in general

oak hamlet
#

YES I FIXED IT, it was due to the mission template on the wrong name

last pier
#

Hey guys, i am new to arma and im having a problem where sometimes, ill switch weapons and my main rifle will disappear when i go back to it. ill switch to my pistol or launcher, and when i switch to my primary, its gone, i hold nothing and the item is a blank icon in my inventory. I appreciate the help if any of this made sense lol.

grim tinsel
#

how are you switching between weapons? @last pier

steady hawk
#

You should check if vanilla works or not, then is an issue of your MOD/mission

last pier
#

1,2,3 abouve the wasd keys @grim tinsel

grim tinsel
#

hm, any mods loaded?

last pier
#

I'll definitely have to check that, I am running modded, but not too many, really just cup weapons and factions with the ussr forces and us forces.

grim tinsel
#

odd, try replicating it in vanilla then as polpox said

last pier
#

Sounds good, thanks for the help!

drifting cipher
#

anyone having this problem

#

can't sub to any mods in workshop

#

there was a problem trying to subscribe to this item. please try again later

wise barn
#

restart steam

drifting cipher
#

not working

thin grail
#

So I have recently reinstalled Arma 3 to my external hard drive (D:), since I had to reinstall steam.
Before the reinstall the game was working fine (on the drive), but now it crashes steam completely in any attempt to open it.
I have tried restarting my computer and validating the game files, the validation process has been stuck at 99% now for around an hour validating "Common Redistribution File".
If you know how to fix this, help would be appreciated.
Have a nice day,
Russian Devil

echo sonnet
#

I have had this problem for a while now zeus takes like fucking 5 mins to just come up before it used to just be 5 seconds then its open pleasw help me

#

Ping me if you got a solution or dm me

#

Thank

wise barn
#

@echo sonnet

  1. language...
  2. mods?
echo sonnet
#

Wdym language?

wise barn
#

zeus takes like f** 5 mins

echo sonnet
#

Oh mb

#

And um

#

I have usp

#

And 3cb

#

And alive

wise barn
#

try vanilla for troubleshooting first

uncut trellis
#

mods will slow down zeus

echo sonnet
#

try vanilla for troubleshooting first
@wise barn

#

Whats that

uncut trellis
#

if zeus works better without mods.

wise barn
#

vanilla = no mods

prime light
#

Original output filename: Arma3Retail_Server
Exe timestamp: 2020/10/12 11:32:50
Current time: 2021/02/05 08:46:55
Type: Public
Build: Stable
Version: 2.00.146773
Allocator: Dll\tbb4malloc_bi.dll [2017.0.0.0] [2017.0.0.0]
PhysMem: 128 GiB, VirtMem : 4.0 GiB, AvailPhys : 29 GiB, AvailVirt : 3.9 GiB, AvailPage : 43 GiB

8:46:55 SteamAPI initialization failed. Steam features won't be accessible!
8:46:55 Initializing stats manager.
8:46:55 Stats config disabled.
8:46:55 sessionID: 8ef73ee86d891c36bb2044ec9e64d69ba2384fc6
8:47:01 Unsupported language English in stringtable
8:47:01 Unsupported language English in stringtable
8:47:01 Unsupported language English in stringtable
8:47:01 Unsupported language English in stringtable
8:47:01 Unsupported language English in stringtable
8:47:01 Unsupported language English in stringtable
8:47:01 Unsupported language English in stringtable
8:47:01 Unsupported language English in stringtable
8:47:01 Unsupported language English in stringtable
8:47:01 XML parsing error in 'Key', code: StringtableXML...
8:47:01 Unsupported language English in stringtable
8:47:01 Unsupported language English in stringtable
8:47:01 Unsupported language English in stringtable
8:47:01 Unsupported language English in stringtable
8:47:01 Unsupported language English in stringtable
8:47:01 Unsupported language English in stringtable
8:47:02 Unsupported language English in stringtable
8:47:02 Unsupported language English in stringtable
8:47:02 Unsupported language English in stringtable
8:47:02 Unsupported language English in stringtable
8:47:04 Conflicting addon RAn2SFX in 'MG8\RJet_C_F\usa\a29', previous definition in 'MG8\RJet_C_F\gre\an2'
8:47:06 Warning Message: Addon 'CUP_Creatures_People_Core' requires addon 'CUP_Weapons_LoadOrder'

#

anyone know please ping

wise barn
#

@prime light
You are missing CUP Weapons

prime light
#

ok

#

thank u

#

and what about the steam API

wise barn
#

Common issue, I've seen it often. Not sure if it even has an impact

#

Also no idea how to solve

prime light
#

okie dokie im gonna try cup weapons it says i put it in command but maybe i spelt it wroing

#

lol its ok

#

@wise barn issue is fixed but do you know about this?

#

8:57:06 Conflicting addon RAn2SFX in 'MG8\RJet_C_F\usa\a29', previous definition in 'MG8\RJet_C_F\gre\an2'
8:57:09 Warning Message: Addon 'jsrs_soundmod_cup_vehicles' requires addon 'CUP_WheeledVehicles_HMMWV'

wise barn
#

8:57:06 Conflicting addon RAn2SFX in 'MG8\RJet_C_F\usa\a29', previous definition in 'MG8\RJet_C_F\gre\an2'
probably a bug in the mod, no clue

8:57:09 Warning Message: Addon 'jsrs_soundmod_cup_vehicles' requires addon 'CUP_WheeledVehicles_HMMWV'

as it says in the message. you load JSRS CUP Vehicles compatibility mod without having CUP Vehicles even loaded.
if you don't use CUP Vehicles, don't load compat mods for it.
but if it is intended, you need to have CUP Vehicles loaded ofc

prime light
#

understood

#

Client/Server Addon Mismatch Client has extra addons: ["ace_compat_rhs_gref 3", ace_compat_rhs-saf3"]

#

any idea @wise barn

wise barn
#

you have mods loaded that are not on the server (at all, or in different version)

prime light
#

roger

#

are ace compats needed?

#

and are the gref and the SAF the extra ones?

wise barn
#

if you are running ace on the server, it is recommended to have the compat mods for other mods loaded as well

prime light
#

ok

wise barn
#

what are you actually trying to do?
running a server, or connecting to one?

prime light
#

setup one

#

and connect

#

nevrrmind lol i took those two compats out and it works perfectly

#

thanks for youre help bro

wise barn
#

to begin with, don't load more mods than the current mission actually needs. GFX and SFX mods (like JSRS) do no good when setting up your first server. stuff comes later

narrow reef
#

Whatever you have running when you build the mission (mods that is) will be required on the server to run the map.

oak hamlet
#

Anyone know why im getting these

grim tinsel
#

Warning Message: Addon '104thAce_Main' requires addon 'SWLB_clones'

#

Also SWOP is banned from the official communication channels iirc

oak hamlet
#

do you think you could help me via dm then?

grim tinsel
#

Nop I dont like helping with SWOP stuff ablobderpy

oak hamlet
#

oh ok...

old copper
#

hey these last few days i was trying to connect to a friends server, and it wouldn't let me connect at all, finally i tried to turn off my unit when i was loading up arma and i was able to connect to the server, just wondering if theres a way to fix that so we can load in with unit badges or not?

forest ember
#

Do you get any errors

fringe salmon
halcyon adder
#

Could someone explain what's wrong here? I'm spawning a module and then trying to sync it to a plane (is carpet bombing module, takes waypoints for bombers from existing plane) but it's throwing an error:

_Bombing |#|synchronizeObjectsAdd [pathfinder2]; error generic error in expression

code (directly from module wiki page with modifications for different module name and synch):

"TTT_ModuleCarpet" createUnit [ 
 getPosATL pathfinder2, 
 _Bombing, 
 "this setVariable ['BIS_fnc_initModules_disableAutoActivation', false, true];" 
]; _Bombing synchronizeObjectsAdd [pathfinder2];```
oak hamlet
#

14:13:43 [CBA] (xeh) INFO: [703098,14738.5,0] PostInit finished.
14:13:43 [ACE] (common) INFO: Settings initialized.
14:13:43 [ACE] (common) INFO: 2 delayed functions running.

Im confused?

#

i load into my server and im stuck on the last loading screen

quaint jewel
#

well these informational messages are not related to that

uncut trellis
#

You need to post link to your image and explain the problem

lime badge
#

my tipping point mission is not working
How can i fix it?

uncut trellis
#

explain how does it not work

lime badge
#

i am at the beach and i still have the mission to kill all enemys at the town and i see no enemys

uncut trellis
#

maybe there is still 1 left?

#

could also try restarting the mission

lime badge
uncut trellis
lime badge
uncut trellis
#

perhaps you are missing some step you need to do

wise barn
#

any mods?

lime badge
#

no

#

i restarted the game and try it now again

#

worked now

winged nebula
#

can someone explain i made a seperate profile for this milsim but when i go on a server i usually go on i only have access to smg's

uncut trellis
#

what you have access to depends completely on the server and what mission is running

#

"milsim" is general term of certain realistic-ish style gameplay. but it is not a specifc gamemode or mission

#

@winged nebula so what gamemode or server are you playing on?

winged nebula
#

its fine i went on to a crewman which meant i didnr have access to rifles. my bad

tulip sleet
#

alright im lost, friend has a missing content issue, simple enough right? nope he reinstalled 3 times, verified cache twice, I gave him the file that was causing an error

#

and he still cannot connect to the server

narrow reef
tulip sleet
#

Right but he has the file, I made sure to double check that

#

The error in question is

#
then I get an error msg I can't play/edit this mission because i have missing content delete.War.FxVeh

#

This file is in blastcore murr

#

The server still kicks him out even if he disabled this mod

narrow reef
#

That’s a mission file error. The mission was created with this mod and is still calling for it I believe. Is the server running the mod?

#

Make sure he is running the exact mods the mission was created with. Also, if you are hosting using mods, players will need the same ones.

tulip sleet
#

But he is the only one with this issue out of like 15

#
with exit code: -1073741515
#

he tried launching through launcher

#

arma just automatically shuts down

#

googling that exit code doesnt really return anything interesting

valid belfry
#

so ive been playing apex warlords a lot on my own and with friends and for some reason it gets really foggy at about an hour into the game and its impossible to see 5 metres in front of me

solid nova
#

Thats a new one, every time I load into an arsenal it adds the entire inventory's worth of free space of empty mags of whatever kind is in my primary

oak hamlet
#

I need help with my server it keeps giving me warning messages in the console my mission file will load but no slots appear, but i put them in the pbo

solid nova
#

So 16 verifies of local game files in, no mods, no modifications no nothing, no missions (even official) have role selection, even opening 3d editor and placing one unit down, then launching the mission, no unit selectable.

uncut trellis
#

role selection?

#

if you place down a unit in editor and hit play that unit is your character

#

where have you seen role selection?

#

@solid nova

solid nova
#

I thought it was implied in MP missions, sp works fine its going into mp thats the issue

uncut trellis
#

so you mean the MP lobby screen or what?

#

are you hosting an MP game?

solid nova
#

Both whilst hosting a LAN and joining a server, both vanilla

#

The only thing I've not been able to test is MP server (online) with an official BI mission, however due to the tests of 2x LAN server (Both unofficial and official missions) and community servers the issue persists, mulitple verifies of game files always heading the same "All files validated"

uncut trellis
#

how about if you join a MP server?

#

what then?

solid nova
#

same issue persists

void cedar
#

Having an issue with audio.

I'm currently using a GoXLR, with ARMA 3 routed to (Game TC-HELICON GoXLR)

Anybody know a fix with this?

uncut trellis
#

what issues?

void cedar
#

Can't hear anything when I load up ARMA, no music, no clicks when I hover over anything.

#

Tried loading into a solo mission, and can't hear anything either.

uncut trellis
#

probs your default audio device is not set right

solid nova
#

Okay this is a new development, now in SP placing a unit, instantly throws me into the spectator camera

#

Even though, the unit placed shows the arma3 profile name of myself

uncut trellis
#

maybe try resetting your profile

uncut trellis
#

Arma 3 uses windows default audio device only

solid nova
#

Any way to do this without throwing all of my settings out the window? xd

uncut trellis
#

maybe not

void cedar
#

It only uses default?

uncut trellis
#

make backup

void cedar
#

That may be the issue.

uncut trellis
#

yes

void cedar
#

One sec

solid nova
#

Okay so new profile has fixed it

#

-ish... Its sorta acting like its stuck on the briefing/roleselect for another mission, before snapping onto the correct one

uncut trellis
#

could try verifying the files again

solid nova
#

2 weird bugs in one night 😂

#

But its a step closer, which is good. Before it was like when you launch a mission that requires mods that you don't have, I think

oak hamlet
#

2:07:32 Warning Message: You cannot play/edit this mission; it is dependent on downloadable content that has been deleted.
a3_characters_f

wise barn
#

from your RPT?

#

@oak hamlet

oak hamlet
#

from my webconsole for my server

wise barn
#

can be safely ignored. known bug

oak hamlet
#

2:38:37 SteamAPI initialization failed. Steam features won't be accessible!
2:38:37 Initializing stats manager.
2:38:37 Stats config disabled.
2:38:37 sessionID: cc82a572f7d7a643f2c4dcbdc1b5b33e443dd90b
2:38:40 Unsupported language English in stringtable
2:38:40 Unsupported language English in stringtable
2:38:40 Unsupported language English in stringtable
2:38:40 Unsupported language English in stringtable
2:38:40 Unsupported language English in stringtable
2:38:41 Conflicting addon 3AS_LPB1_V1 in '3AS\3as_b1_Low_pol\3AS_LPB1_V2', previous definition in '3AS\3as_b1_Low_pol\3AS_LPB1_V1'
2:38:41 Conflicting addon 3AS_LPB1_V1 in '3AS\3as_b1_Low_pol\3AS_LPB1_V3', previous definition in '3AS\3as_b1_Low_pol\3AS_LPB1_V1'
2:38:41 Conflicting addon 3as_Module_Ordnances in '3AS\3as_modules\zeus', previous definition in '3AS\3as_modules\ordnance'
2:38:41 Conflicting addon 3AS_Weapons_RPS6HP in '3AS\3AS_Weapons\rps6hp', previous definition in '3AS\3AS_Weapons\rps6'
2:38:44 Warning Message: Addon 'OPTRE_ACE_Compat' requires addon 'OPTRE_Weapons'

#

could someone help me please

weary sky
#

read the last line...

wise barn
#

the answer is literally right there in the message

#

eh... ninja'd 😄

ionic bobcat
#

Is that a separate mod cause me and him are troubleshooting and we can't figure out why or what that is cause we have OPTRE and theirs not an independent mod called OPTRE Weapons [We are new to server owning so sorry for the hassle]

uncut trellis
#

Perhaps foe some reason your optre installation is broken

#

Quite likely it should be included

#

Or you have wrong version of optre and ace compact for it

ionic bobcat
#

Ill run that by him thanks for help

cloud bobcat
#

hey folks, Ive been trying to open the Object Builder in A3 Tools and when I select it, it just closes everything and wont open

#

any ideas?

scarlet timber
#

Hey, does anyone know where the hell you find the the mission template names for workshop missions? (For server config)

#

In this case, the Dynamics missions but I'm kind of wanting to know how to find them because it doesn't really ever say in the kbas...

fringe salmon
#

hi dudez

#

for anyone that uses ACE, what settings in ACE Scopes do i wanna disable so i get normal zeroing, vanilla?

grim tinsel
#

tried letting it load for a while?

#

sometimes it takes a while for me

#

otherwise take a look at your rpt log

sly breach
#

A group of friends and I just got back into arma and for some reason, none of us can host a server, dedicated or not. We all used to be able to a few months ago and this is confusing us. We all have port forwarding on and with the right ports for arma, have expanded the ports and tried everything we could find on the internet. Our main Issue is when we host, no one can join and steam says "Server is not responding". We are not new to this and have done thousands of hosted servers so this issue doesnt make sense to us. Is this a user/isp issue or a game/steam issue?

vapid whale
#

i made a custom arma 3 mission, but when i die the whole map resets, so all the AI and AI vehicles i setup and spawned all delete and i have to remake the whole mission, is there a way i can make all the ai respawn and go back to their starting positions when i die

uncut trellis
#

how did you make it?

#

@vapid whale

vapid whale
#

i made it using the zeus editor

#

so i could use a mod that i use

#

@uncut trellis

uncut trellis
#

zeus is not editor

#

zeus is live game

#

I dont think you can save that

#

you would have to make a proper mission with the Eden mission editor

#

@vapid whale

grim tinsel
uncut trellis
#

well you would need zeus enhanced to be running for that

#

when you make the thing

grim tinsel
#

yup

somber harbor
#

hey

#

but its been loading for 15 mins [ stuck at like 75% - 80% ]

uncut trellis
#

@somber harbor what is this about?

#

some part of the conversation is missing perhaps?

vapid whale
somber harbor
#

oof

grim tinsel
vapid whale
somber harbor
#

and its just stuck loading

uncut trellis
#

if it uses mods, those can cause issues

#

try another one

somber harbor
#

well u see.. the main reason ive been trying to play arma 3 is cuz of Exile mod

#

but i used to have a problem with playing cuz of Battle eye
so i uninstalled it
now i installed it again so i can try and play it :}

uncut trellis
#

you could perhaps try resetting your Arma 3 profile

#

other than that I have no ideas

somber harbor
#

and how do i do that?

uncut trellis
#

delete your profile folder in your documents folder

#

google has the specifics I believe

#

might be good idea to make a backup too if you want to save your progress

vapid whale
agile rampart
#

Does anybody know if there is a way to enable Zeus on SP scenarios through the debug console?

#

I can't seen to find an answer

wise barn
cloud bobcat
#

Hey folks! When I open Arma 3 I get this error: No entry 'bin\config.bin/CfgWeapons/arifle_MX_Base_F/Single.displayName'.
I also get it on the CSW LVOA-C Weapons. And I am not sure what is causing it. Ive been working through turning on and off various mods that Im using but I get the same thing no matter what.

#

any ideas?

wise barn
#

verify game installation and test without mods.
if you get no error then, it's a mod issue (mod bug/error)

figure out which mod is causing it (split your pack in half. run A, if no error run B. if error, split B in two parts, repeat)
once the faulty mod is found, try to repair it via arma 3 launcher options.
if the error persists, contact mod creator

cloud bobcat
#

@wise barn I have been working that Run A then Run B for the past 2 hours and I cant seem to find the mod that is causing the error.

wise barn
#

¯_(ツ)_/¯

cloud bobcat
#

yeah its really weird

uncut trellis
#

mods can easily break the game if they are not made right

#

nothing to it. Tedious to figure out if you happen to have huge amount of mods

cloud bobcat
#

If I run the CSW mod by itself, its fine. Once I put in the other mods, everything starts to break. If I try to switch fire mode from single to fullauto, it puts the weapon on my back

uncut trellis
#

well all mods dont work together

#

cant do anything about that

#

the question is do you need to run all the mods togehter?

#

since you wont be able to join most servers with huge mod sets anyway

#

and if you play just SP the you just need to figure out what mods you can run and drop the rest, simple as that

cloud bobcat
#

its for a community.

#

Things were working fine last night, then we changed a few mods and then stuff started to break. But I tested it all without the new mods and it was still having an issue. Ill try rolling back and see if that fixes anything

uncut trellis
#

removing breaking mods is pretty much the only option

cloud bobcat
#

Yeah ill have to work with individual that manages our modpack to have them roll it back to see if I can figure out was is wrong

faint bramble
#

having a bit of trouble with loading into arma, i find that any attempt at minor mods fuck my shit up, i've got a pretty good gaming PC that runs games like squad, insurgency and some call of duty games at good speeds.

#

whenever i try to load into it or play, i get something called a 'STATUS_ACCESS_VIOLATION'

steady hawk
#
  1. Language
  2. STATUS_ACCESS_VIOLATION is really a common error. Make sure it's not happening in vanilla
faint bramble
#

just ran some basic stuff in it, using singleplayer editor with some NPCs, not a lot and it still just died.

steady hawk
#

Just ran some basic stuff no, vanilla

faint bramble
#

as i said

#

vanilla

steady hawk
#

You didn't said so

faint bramble
#

well when i say basic i mean no mods, baseline game

steady hawk
#

That's hard to assume

#

Anyway, try to verify the game then

faint bramble
#

game files?

steady hawk
#

Yes

faint bramble
#

rather verify the integrity

#

alrighty

steady hawk
#

Aren't the same thing?

faint bramble
#

beats me

uncut trellis
#

if you got usb audio device in use, try unplugging it and play a while

#

some windows update way back messed up some usb audio devices for Arma

faint bramble
#

all files validated, none of that

#

nothing gone wrong with it ^

steady hawk
#

What about USB Audio that HG mentioned?

faint bramble
#

that'd take me a little while as it's currently very early in the morning,

#

but i have played a bit without a headset a few weeks ago

#

so i doubt it'd be that

#

had the same issue as before

steady hawk
#

You had the issue for a while?

#

You tried to load ACE Compat files for RHS without loading RHS itself?

faint bramble
#

ive had it for this issue for a little while but thought nothing much of it and just shrugged it off, up until now when i decided to actually to fix it

steady hawk
#

So, you only placed some units and that's it on Editor?

faint bramble
#

im only able to place some units in editor, say a standard NATO infantry squad and an IFV, same with CSAT and thats the max im able to really get

#

anymore then it just crashes and goes straight to the access violation thing

uncut sparrow
#

Anyone know what the issue could be?

uncut trellis
#

@uncut sparrow the last line says what you are missing..

uncut sparrow
#

If you're talking about the RHS one then no, it's been saying that for a while

uncut trellis
#

then problem is mods.

gritty onyx
#

I can't find the @intercept folder after building Intercept from source with CMake

gritty onyx
#

@quaint jewel Is the Intercept host folder the intercept folder in build folder (so that I have to add the @ in front of it myself)?

sweet mason
#

I was going to move my Arma 3 to my SSD and it wont let me move it because it says i dont have enough space when i do

quaint jewel
#

I don't think the cmake build spits out a modfolder

#

it just spits out the extension dll

gritty onyx
#

@quaint jewel Just as friendly note, the template plugin in Intercept wiki has API version 1 configured to it, while Intercept seems to require API version being set to 2 nowadays

quaint jewel
#

@fringe salmon you are trying to troubleshoot what?

quaint jewel
gritty onyx
#

I spent good 4 hours trying to figure out what was wrong 😄

oak hamlet
#

My mission i try to load keeps putting me back to the mission vote screen anyone know why?

wise barn
#

could be missing mods. check your latest RPT file

oak hamlet
#

im new to server hosting, what is that?

pine kite
#

basically the server or game client log files. Look for files ending in .rpt On your game client they can be found in c:\Users%username%\Appdata\Roaming\Arma 3, on the server it's wherever the server executable is I think.

forest ember
#

Why all of a sudden do my placed units not spawn in with the custom loadout I gave them in the 3den? I tried this in another scenario (outside my mission) and it worked. It does not work inside my mission.

#

I understand why they don't respawn with that loadout but the initial spawn should always have the custom loadout.

serene pecan
#

Hey there!! By any chance can someone help me start up arma? The issue is that the game cannot load up texture file ''core\defult_co.paa.''

uncut trellis
#

sounds like you need to verify your game files

honest hornet
#

hi i wanted to use the binary files things, i downloaded the last one but theres like 12 folders, wich one is the correct one?

uncut trellis
#

sir, your current information does not yield enough context to know what you are talking about. Please try again and explain as if we here cannot read your thoughts, don't know what you are doing or want to do and can't see your screen.

honest hornet
#

i read a guide on steam where you can download the performance binary file, that is suppose to give you some extra fps

#

i followed the link on the bohemia forum and i downloaded the lastest file

#

this version 2.00.147241

#

extracted the file and theres 10 folders wich says per00 per01 etc

#

my question is wich folder is the correct one to replace the arma.exe

#

hope thats clear

#

or idk if this will give me any perfoormance at all..

wooden snow
#

Hey Ho. Soo I was trying to join a server (47 Mods) and after verifying game install (several times), making sure arma wasn't arma, reinstalling the game (several times), redownloading the workshop mods, repairing mods. I have gotten the same exact error. I need some help as per say

#

Error message btw : "You cannot play/edit this mission; it is dependent on downloadable content that has been deleted.WarFXVeh"

#

DM for anything other additional info you require

wise barn
#

@wooden snow
you are missing a mod that has WarFXVeh in it

wooden snow
#

Well... since I'm kind of new to arma, I really don't know what mod should contain that

#

I'm gonna check that out

wise barn
#

did you try to google it?

wooden snow
#

Blastcore

wise barn
#

how do you try to join this server?
detailed steps please

wooden snow
#

Turn on the game, Go into multiplayer, Direct Connect and Join.

wise barn
#

meh

wooden snow
#

is this detailed enough?

wise barn
#

launcher > server browser > look for server > join
if mods are missing, you get prompted to launch / download them

#

direct connect doesn't prompt you for missing mods

wooden snow
#

Affirm. Doing that right now

#

Okay.... I've found another problem

#

Where should I send the report?

#

here?

#

Process exit

Exit code : 0xC0000135 - STATUS_DLL_NOT_FOUND
Running time: 00:00:00.1952266

#

Troubleshoot report.

#

I think I found the issue. DirectX and Microsoft Visuals were recently deleted from my PC. This might be the issue

wise barn
#

not just might be, it definitely is an issue

#

resintall DX and vcredist for 2013

wooden snow
#

Yeah. Doing that literally. Right now

torpid garden
#

hi all 😉

#

who got few minutes time to listen to our server problem 😉 pls

grim tinsel
#

if you post them here straight away there's a better chance of people having time blep @torpid garden

torpid garden
#

allright

#

we build us a server ( something small with windows server 2016 , installed , steam cmd , Tadst

#

and getting same error all the time and cant find any solution to ( Picture res\flag_kp_co.....)

grim tinsel
#

Can you share the error message please?

torpid garden
#

allright ( pretty long log)

#

8:02:14 Roles assigned.
18:02:14 Reading mission ...
18:02:17 Picture res\flag_kp_co.paa not found
18:02:17 Mission read from bank.
18:02:18 Roles assigned.
18:02:18 Reading mission ...
18:02:20 Picture res\flag_kp_co.paa not found
18:02:21 Mission read from bank.
18:02:22 Roles assigned.
18:02:22 Reading mission ...
18:02:24 Picture res\flag_kp_co.paa not found
18:02:25 Mission read from bank.
18:02:25 Roles assigned.
18:02:25 Reading mission ...
18:02:28 Picture res\flag_kp_co.paa not found
18:02:29 Mission read from bank.
18:02:29 Roles assigned.
18:02:29 Reading mission ...
18:02:32 Picture res\flag_kp_co.paa not found
18:02:33 Mission read from bank.
18:02:33 Roles assigned.
18:02:33 Reading mission ...

#

aand its keeping rolling

grim tinsel
#

I assume you're playing one of the kp liberation missions?

torpid garden
#

yes it is

#

kp_liberation,altis

grim tinsel
#

then I recommend heading to #channel_invites_list and joining the kp liberation discord, there they can propably help you better with that issue

misty star
#

TFAR will work in any channel.

jaunty cedar
#

Hi, after the recent Unsung update, a mission named dynamic recon ops crashes when US faction is selected for the player. The rpt reveals: ```
19:45:25 Render target memory points PIP2_pos & PIP2_dir not found.


Exception code: C0000005 ACCESS_VIOLATION at 46224EDC``` Any ideas how to take it from here?

#

in the update a bunch of US units were added and changed.

quaint jewel
#

besides the first line, no

jaunty cedar
#

thanks, I read the code for DRO and it seems to spawn all vehicles and some crashes it

#

found it, the NVA radars are busted again

jaunty cedar
#

if of interest: if you set an animDirection for a non existing animation in sensorsmanagementcomponent->components->activeradarsensorcomponent, arma 3 crashes

tiny pewter
#

This is a very basic question but how on earth do u get hosting a server to work? I'm trying to get a friend to join but there no luck so far

uncut trellis
#

you likely need to set up portforwarding in your router/modem so that the connection can be made

#

assuming you have a IPV4 type internet connection and not IPV6

gentle charm
#

Having same issue still
IPV4 Internet

All ports are forwarded with correct protocol

I’ve tried both UPNP and not using it

as far as I can see there is no reason I should not be able to host

I can host but my server is not listed because it’s not responding

I have absolutely no clue what’s wrong
And I have yet to see a fix in ANY forum anywhere

if anyone knows how to fix this issue I’m happy to listen for as many hours as u can go on without going insane
(Yes @ me anytime as much as u want I wanna figure this out)

proven forge
#

Sudden, new problem for me. Revalidated files w/ Steam, and all seems fine on that end.
Symptoms:
-Server passwords no longer saved
-Logging onto my unit's server, I 'die' at the spawn point (mid ocean, 0, 0, 0) and don't even get to the role selection screen before I'm kicked from the server.
-Other members of my unit have no problem getting on the server and selecting a role.
-missing an asset: bin\config.bin/CfgMovesMaleSdr/States/AinjPfalMstpSnonWnonDnon_carried_Down.connectFrom I know this is an animation file, and probably due to a mod, but it just started cropping up as well.

I'm at a bit of a loss; any suggestions on why this might be happening?

#

Looks like Arma might have decided to remove CBA_A3 on its own... Hopefully that fixes it.

wise barn
#

@gentle charm @proven forge
for server specific questions, please head over to the according #server_ channels

summer basin
#

trying to load into a game with my friend using NMD Sandbox.. stuck here

#

only on Malden and Tanoa, Altis works fine

weary sky
#

anything in the log files (client and server)?

summer basin
#

fixed it, worked if you don't join from launcher

snow cove
#

I'm asking this here because this issue only exists with Arma and I can not figure out why; My Arma 3 audio is playing through my headset into Discord even with my effects volume all the way down. I can't change my input or output setting in arma either afaik. Hoping someone can help me out here.

steady hawk
#

Arma 3 uses Widows' default audio devices at its launch. You need to change it before you launch the game... is that the answer for you?

snow cove
#

Partly yeah it does, however I have my windows settings set to my default headphones

#

Playing other games on Steam do not create the same issue as far as I have tested

steady hawk
#

USB Headset?

snow cove
#

Splitter Aux headset

#

HyperX headset to be more precise

wise barn
#

what does "splitter aux" mean?

snow cove
#

idk

#

just its not a usb

#

it uses a splitter cable

#

also turns out its not just an arma issue

#

so thats cool

wise barn
#

you seem to have your desktop audio routed back to your default input device. maybe monitoring active

snow cove
#

I'm not sure how I would fix that I'm afraid.

#

I'm sorry that this isn't an Arma issue at this point but if someone would be willing to help, I'd be very grateful

vapid whale
#

is there a way i can make an ai despawn or delete once it gets to a certian waypoint?

steady hawk
#

Use deleteVehicle when they reached the waypoint

sonic goblet
#

any tech savvies that can help me figure out why my game keeps crashing? I can play maybe 15 minutes at best before I inevitably crash with a 0xC0000005 - STATUS_ACCESS_VIOLATION message

#

I've tried a couple of different googled solutions, but none that worked

quaint jewel
#

The crashdump (mdmp file) will contain the cause of the crash

#

the message you posted provides no information about why the game may have crashed

sonic goblet
#

are they stored somewhere or will I have to crash it again?

quaint jewel
#

They are in

#

%localappdata%/Arma 3

#

Press WIN+R and enter that it will open the folder

sonic goblet
#

can I send it to you over PM? can't seem to upload it to the server

quaint jewel
#

yes

#

Probably gonna get to it in 10 minutes, if nothing bad happens

sonic goblet
#

no rush

wicked dew
#

Hello,

grim tinsel
#

Hello.

sudden acorn
#

Hello:

wicked dew
#

...Uh hello, so I have had this issue for the past few days add I have searched the internet for a solution that apparently has evaded me since then. But I am unable to launch Arma from the launcher provided by steam with certain mods installed. However I am able to launch it with on mods from the launcher aswell as from the .exe files in the game folder. I have tried running both Battle Eye, Steam and Arma as an administrator. I have re-installed the game and verified integrity of the files multiple times. I have uninstalled Arma's Battle Eye and re-installed it per Microsoft's instructions AND steam's forum instructions and I still cannot launch Arma with certain mods installed. What happens is this: I click Arma 3 from steam. Add mods. Click Play with mods. The button "grays" as if launching then immediately ungreys and nothing happens.

grim tinsel
#

Huh, well thats odd

wicked dew
#

These are my PC specs: and I have a pic of the mods I use that I can send to anyone that needs them but mainly it happens with ACE, RHS, and CUP mods

#

Processor: Intel(R) Core(TM) i9-9900K CPU @ 3.60GHz
Installed Ram: 64.0 GB
System: Windows 10
MotherBoard: ROG STRIX Z390-F Gaming
BIOS Mode: UEFI
Graphics Card: NVIDIA GeForce RTX 3080

#

Another weird thing that I have tried today and yesterday actually is if I join a server that requires mods, I can download and launch the game server from the launcher with the mods, but only then. I mainly play single-player though as I am stationed in Japan and it is hard to find a good server to play effectively on here. Literally any help would be dope.

quaint jewel
#

@sonic goblet Which terrain were you loading when it crashed?

sonic goblet
#

once was during the tutorial mission and all other instances were during the opening area of the Old Man scenario, I think including for that file

quaint jewel
#

Old Man is Tanoa :/
Verified files in steam already?

sonic goblet
#

first thing I tried

#

something failed to verify but it didn't seem to fix anything

quaint jewel
#

Crash seems pretty random. Can't really make out a reason.
How do you start Arma? Arma Launcher?

#

Have you tried setting memory allocator to system?

sonic goblet
#

I'm confident I set the memory allocator, but the selection was blank for some reason

#

I'll give it another go

#

I think my system has been acting up for some other things, so it might be a hardware issue?

#

but yes, I use the launcher through Steam

#

ok apparently I just hadn't set the memory allocation properly :|

#

it hasn't crashed yet, at least

warped forge
#

Hello

#

I'm having a problem with DLCs

quaint jewel
warped forge
#

I bought the DLC bundle with all the DLCs (except global mobilization) some months ago

#

But the content never worked for me

#

It says i own them in steam but i cant find the items

sonic goblet
#

seems to be good now, thanks

quaint jewel
#

Which content specifically @warped forge any example?

warped forge
#

And in some DLCS it says "try"

#

all the DLCS except contact, global mobilization, marskman and apex

quaint jewel
#

Can you name a specific item/asset from a DLC that you own but you don't see ingame?

warped forge
#

karts DLC

#

the driver uniforms

quaint jewel
#

And if you go into Eden Editor and search for "Kart" you don't find the karts?

#

or if you place it down it has no driver or the driver is invisible?

warped forge
#

hmm wait, how many driver coveralls themes are there?

#

because if i spawn a kart it spawns a random colour

#

but i cant find the other uniforms

#

i can't send images in here

#

So the DLC works, i can spawn the kart and it spawns the driver with a random uniform, but the uniforms dont appear in the arsenal

quaint jewel
#

In the arsenal via the button from the main menu?

warped forge
#

the one when you click on a player "edit loadout"

quaint jewel
#

This is how it looks for me

warped forge
#

can i dm u a picture

#

Becuz i cant send pictures in here

#

its like all the driver uniforms are hidden unless the one im using (which spawned automatly on the driver with the kart vehicle)

quaint jewel
#

sounds like a limited arsenal

#

but shouldn't happen in editor notlikemeow

warped forge
#

It's weird, i still have the content but i can see it

#

and in some DLCs it says "try" even tho i own all of them

grim tinsel
#

make sure that you have the dlcs activated on steam? @warped forge

#

odd issue, havent seen it before

warped forge
#

Wym with activated, that if they say i have them on my library?

pine kite
#

Check the DLC tab/menu item of the Arma 3 properties in your game Library (in Steam, not a folder on your disks).

warped forge
#

oh

#

they are all marked

wicked dew
#

I am pretty sure I had that issue when I first got the dlc's. I had to reinstall the whole game for it to take affect

#

I honestly don't know if it will work with the editor, but it is worth a shot if you are not too far in whatever you are creating

tiny pewter
#

i'm having trouble hosting a game, i've got port forwarding on, but my server isnt showing up for any of my friends, what else could be the problem?

wise barn
#

make sure you have a real IPv4 landline, not IPv6

tiny pewter
#

apperently virgin media doesnt offer IPv6

#

they use something called docsis?

wise barn
#

docsis is "just" the technology for transmitting the data. docsis can do IPv4 aand IPv6. docsis is cable internet which i have also, but i got no IPv4, just IPv6

pine kite
#

If it's not the port forwarding that is messed up, it's likely a firewall issue on the pc the server is running.

#

Also, how are we to confirm you did not make a mistake in port forwarding the right ports, or to the right IP address?

tiny pewter
#

apperently VM havent been granted IPV6 in UK yet. How can I make sure i havent cocked up the port forwarding?

pine kite
#

screenshots? posted on some site elsewhere and link it here.

tiny pewter
#

idk if this will help at all? @pine kite

pine kite
#

Well, blotching that IP address is not going to help anything. Nor protect you. And I can't tell if that is an incorrect one. Could be a private address, could be a public address.

tiny pewter
#

oh apologies

#

what else would u need to know?

pine kite
#

No, that IP is good. Assuming it's the IP of your server. Don't mix port forwarding and UPnP though. One or the other.

tiny pewter
#

oh so i should turn one off?

pine kite
#

I would not use Upnp, yes. Also, it's not forwarding 2305.

#

You may need a router reboot. That's what the last person I helped got stuck on.

#

Consider making that IP address reserved for the MAC address of the server network adapter. Usually DHCP reservation menu in the router. Else it might be taken by another computer in your network.

tiny pewter
#

apperently i dont have DHCP reservation - and apperently MAC address cant be taken? (i have no idea what this means, i'm just relaying what someone in a vc is saying as i read out the advice since... im completely clueless with internet stuff 😛 )

#

i plug pc into router, and i have internet shruggie

#

brb i'll try rebooting router

pine kite
#

Maybe the router doesn't offer that feature to reserve IP addresses. MAC addresses are a unique code each network port has used to identify each other in your local network.

tiny pewter
#

i hope the problem isnt that i have gcam on 😛

pine kite
#

I don't know what gcam is?

tiny pewter
#

it a camera mod for editor

pine kite
#

I don't know. Googling suggested a Google Camera. I wouldn't know how either of those would interact with your game or server.

weary sky
#

try to remove functions_f.pbo from the 'Addons' folder and check game integrity again (it should repair your game)

#

because that file should exist in that pbo

#
  1. No to any : Advertising, Spam, Malware, explicit , questionable content!
    any violation of the intellectual property right of others is prohibited!
pale steeple
#

I've no roles in role selection on my multiplayer server, but have them if I host off my PC

weary sky
pale steeple
weary sky
#

and are the units playable?

pale steeple
#

Yup

#

If I host it LAN or from my PC the role selection is correct, it's just on the dedicated server

#

@weary sky

weary sky
#

Can you dump the server RPT (where you load that mission and get into the lobby)

pale steeple
#

Oh

#

found it

#

okay so

#

"0:01:48 Warning Message: You cannot play/edit this mission; it is dependent on downloadable content that has been deleted." which I don't get because I've like, triple checked and the server has all the required addons, all of which are still on the workshop and up to date, installed

weary sky
#

'a3_characters_f' is normal for servers, so that's not the problem

#

although the 'List of mods' don't show any mods, only vanilla addons

pale steeple
#

Yeah, I see that. I dunno why :/ the host's install function says they're installed, and i checked the server files to make sure they're all there, and they are

#

do you like, need to activate installed mods on a server somehow or

weary sky
#

they need to be in the command line to start the server

pale steeple
#

Oh wait i'm dumb

#

i had them all saved in the command line thing

#

but didn;t

#

enable it

#

lmfao

fallow swan
#

tbh, I feel a bit bad about those guys who are barred to buy stuff online due to their stupid country laws

pale steeple
#

alright guys stupid dumb boy back

#

"SteamAPI initialization failed. Steam features won't be accessible!" in rpt

wicked dew
#

Is anyone able to assist me with my original post? Not the random, "hello", but the mod issue

steady hawk
wicked dew
#

Yes. I am able to launch it with no mods.

steady hawk
#

Then pretty sure that is an issue of the MOD

#

Or, MODs

wicked dew
#

Do you know if ACE3 or CUP always had issues?

steady hawk
#

Well, you HAVE to list all of them

#

Also, please can you give the info what exactly will be happened if you try to do, like error logs?

wicked dew
#

I am unable to launch Arma from the launcher provided by steam with certain mods installed. However I am able to launch it with on mods from the launcher aswell as from the .exe files in the game folder. I have tried running both Battle Eye, Steam and Arma as an administrator. I have re-installed the game and verified integrity of the files multiple times. I have uninstalled Arma's Battle Eye and re-installed it per Microsoft's instructions AND steam's forum instructions and I still cannot launch Arma with certain mods installed. What happens is this: I click Arma 3 from steam. Add mods. Click Play with mods. The button "grays" as if launching then immediately ungreys and nothing happens. But if I launch from the launcher to a server, I am able to download and launch the game without the server mods installed

steady hawk
#

I don't mean repost the original post, tho...

wicked dew
#

The last two sentences there are exactly what I do. No error message pops up. I checked the crash dump following the post just below my original and there is no crash log in that folder

#

give me a sec to list out the mods I last tested

#

RHSAFRF
RHSUSAF
CBA_A3
RHSGREF
ACE
Overthrow
Overthrow PLus
ACE COmpat-RHS for {RCS}
ACE Compat- RHS United States Armed Forces
ACE Compat - RHS: GREF
ACE Compat - RHS Armed Forces of the Russian Federation
ACE 3 Extension (Placeables)
ACE 3 Extnesion (Gestures)
ACE 3 Extnesion (Animations and Actions)

steady hawk
#

Tried to repair MODs?

wicked dew
#

I have tried that for ACE and it's requirements to no effect. I have not tried for all of them.

steady hawk
#

Try to do that for all of them

wicked dew
#

Rog. I'll do that now thanks

#

Ah apparently my PC is denying steam from using the mods... when I try to repair some of them I get a missing file privileges error...

steady hawk
#

Make sure you own an UAV terminal

#

UAV Terminals have its own side, you maybe are trying to connect with wrong side

#

Hm 🤔 Can't do that neither

grim tinsel
#

Terminal needs to be the same side as player iirc

earnest heart
steady hawk
#

VA player is a civilian IIRC?

gentle charm
#

:3
Just gonna put this here if someone else has issues with hosting since I’ve seen others with this issue and not a SINGLE mention on any forum on this

Check to make sure your router allows multiple connections

mine didn’t have that enabled and that’s why it gave no error when setting up but wasn’t responding for anyone

For me it was under “special applications”
It may ask u to forward ports there

celest phoenix
#

Hello, does anyone know if it is up to the mission file or the server to tell the client to load a specified map? And if so where?

maiden ginkgo
#

Hello everyone, recently I have been having trouble joining zues servers. Every time I join a server weather it has 2 people in it or 20 I get kicked as soon as I join. It started happening after I joined a server a few days ago and someone on vc told a mod to kick me because all I was going to do was "spam music and rdm". I usually keep quiet and try to follow the objective in zues and while I sometimes fire on friendly's it's never in an intentional or destructive way. Anyone else have this problem or can anyone help me out?

pine kite
fallen juniper
#

okay so when i open arma 3 it says 'arma has closed in an unusual manner' blah blah blah so how do i fix it?

#

i think it has something to do with battleye

#

i do have battleye on

grim tinsel
#

We're gonna need more info, like the error code that you get @fallen juniper

fallen juniper
#

i don't see an error code, oh wait...it actually says "the code execution cannot proceed because was not found. reinstalling the program may help fix this problem"

#

thats what it says when i have battleye on

#

battleye off says "arma has closed in an unusual manner"

grim tinsel
#

you should be seeing en error code in the crash box that pops up in the launcher

fallen juniper
#

ends in 135

#

thanks

#

i got on the community wiki and am looking at it now

#

status ddl not found

#

oh wait

#

i might have some corrupted mods

#

welp

#

status ddl still not found

#

even though i got rid of all the mods with a red chain

quaint jewel
#

probably directx

hidden vigil
#

Does anyone know why my audio keeps dissapearing (pops out pops in)?

fallen juniper
#

i have directx 12

#

okay so i cant get the dependency walker going because my winzip trial has expired

quaint jewel
#

winzip? oof

#

there were tons of people with that same message

#

its either vcredist or directx

#

Arma doesn't care if you have dx12 installed, Arma uses dx10/11

fallen juniper
#

thanks a bunch guys but i can't fix all this and am probably gonna uninstall arma 3 from my desktop

quaint jewel
#

Okey have fun salute

fallen juniper
#

i was really hoping to play the OPTRE mod...

#

but my computer said no

#

but eff that apparently

grim tinsel
#

sw opposition is banned from the official forums for ip reasons 👀

#

but blobdoggoshruggoogly seems pretty quick to give up on it

fallen juniper
#

ip?

grim tinsel
#

intellectual property

fallen juniper
#

whats that mean

wise barn
#

@fallen juniper
reinstall DX and vcredist for 2013

SW mods are violating the rights of disney and therefore all about it is banned on official platforms

fallen juniper
#

thanks disney

wise barn
#

it's not about disney in general, it's about following the rules and laws

fallen juniper
#

would this count as official forums?

trail hollow
#

when i do the second tutoiral mission for arma 3 it kicks me from the game

#

it's when I equip the scope and try to ads

wise barn
#

@fallen juniper
yes, this server is official

fallen juniper
#

welp

#

darn

fallen juniper
#

i think i'll have dad try to fix it, he's a lot more...persistent when it comes to this sort of software stuff

proud wedge
#

When my friend puts in my IP address to connect to my server, it doesn't appear for him?

dusky hill
#

Anyone ever have a issue where it like when you hit save. It does not actually save?

leaden thistle
#

created mission in creator.
exported to multiplayer as zeus mission. players have no sides to choose from?

grim tinsel
leaden thistle
#

wym? i have respawn positions down, is that not enough?

sleek sky
#

If its a Multiplayer mission atleast.

leaden thistle
#

how do i set that?

#

ive exported multiplayer missions before that worked fine but this one isnt acting right.

grim tinsel
#

open the units attribute -> select 'playable' @leaden thistle

leaden thistle
#

how do i see all currently playable units?

#

also if a person spawns does it take away that unit spawn point?

grim tinsel
grim tinsel
leaden thistle
grim tinsel
#

1 ai set as playable = one player slot

leaden thistle
#

got it. and do they actually take over that body?

grim tinsel
#

yep

leaden thistle
#

how would i put down a zeus slot?

leaden thistle
#

i put down a zeus trigger? but seems to only let me "crawl" and not use the use interface or fly. hmm.

wise barn
leaden thistle
#

i mean that would be helpful if i even know what i was looking for

trail hollow
#

my game keeps crashing for some reason

wise barn
#

and what now?

#

@trail hollow
what do you expect us to do with that little of information?

trail hollow
#

Idk

#

it just keeps crashing

wise barn
#

idk either

trail hollow
#

I'm validating game files to see if that fixes it

stone obsidian
#

I have loaded the mission file which is name.map.pbo into mpmissions. I went into the configuration file and did what I had to do there. I then went to turn on the server and then when I look on the arma 3 launcher, it did not show the "Type of mission" and "Name of mission". Does anyone know what I am missing. When i join the server, all I get is a black screen.

stone obsidian
#

The black screen I am getting is basically like the loading screen of Arma 3. Sorry. Thank you.

sleek sky
#

So lately always when me and friends get in a Firefight with AI the frames drop unbelievable low, like from 50-60 down to 15-20 is that a current issue?

We play on a self hosted server (servers running on a dedicated Linux box) with minor mods, Ace, Acex, taskforce radio and VcomAI

fringe salmon
#

When I try and launch arma from the launcher nothing happens the launcher closes like normal but the game doesnt load

In battle eye this occurs

01:18:37: Starting BattlEye Service...

01:18:43: Launching game...
01:18:48: Note: File blocks can be ignored if they don't cause problems with the game.
01:18:48: [INFO] Blocked loading of file: "C:\Program Files (x86)\Hewlett-Packard\HP ProtectTools Security Manager\Bin\DpOFeedb.dll".
01:18:48: [INFO] Blocked loading of file: "C:\Program Files (x86)\Hewlett-Packard\HP ProtectTools Security Manager\Bin\DpOSet.dll".
01:19:02: [INFO] Blocked loading of file: "C:\Program Files (x86)\Hewlett-Packard\HP ProtectTools Security Manager\Bin\DpOFeedb.

Someone help out this only started happening after I accidentally opened up my HP personal assistant app

uncut trellis
#

could be portforwarding is not done or he has IPV6 connection which wont work

fringe salmon
#

Anyone know a solution

pine kite
#

I know, was just the first starting question. If he bites, the next ones will follow.

pine kite
#

Have Steam validate your Arma 3 install through the properties of it in your Steam Library.

fringe salmon
#

I removed all traces of HP

#

And the issue still pursues

#

Now battle eye wont even tell me what is causing the blockage

fallow holly
#

Hi, im having some issues with an autostart bat. if anyone is able to guide me in the right direction that would help a lot.
the autostart bat works properly, but the issue im running into is that whenever the server crashes. i get an error BEX i believe. unless i close it manually the bat file wont restart the server.

sleek sky
mint venture
#

everywhere else works but it just times out everttime i try to go to my units

grim tinsel
#

tbat page works fine for me

#

units however doesnt

weary sky
#

dev is working, units is slow and broken

mint venture
#

Yeah i meant to link to units, not dev

proud dust
#

I cant join my friend (we are trying to go into a mission together)#

wise barn
#

and i can't get into my car....
now what are you gonna do with that amount of information? the same as i can do with yours... nothing

#

please be more specific

#

(as for my issue: i don't even have a car to get into)

sleek sky
#

but everything to the lowest settings possible, and still have the same framedrops when Firefights with AI start and also when looking at exploded burning cars.

pine kite
pine kite
wise barn
#

why should i do that?
i pay 13,- for public transportation per month 😉

pine kite
sleek sky
pine kite
#

Then it is likely a inefficient mission code.

sleek sky
#

I even tested it in Eden Editor. Placed 1 Guy, and a vehicle that explodes. looked at the car, fps broke down do around 10-14 FPS.

#

then tested a firefight. Same issue.

#

Even the Campaign is Laggy as hell w/ explosions n stuff. but we didnt have that issue before the latest Update.

#

i just hope the next game from the armed assault series will run on the new Enfusion engine, DayZ runs like a charm in Large firefights with many particles

wise barn
#

it may sound stupid, but did you plug in your monitor to the graphic card?
we had this case already...

sleek sky
#

😂 Ofcourse

earnest heart
sleek sky
uncut trellis
#

mods?

sleek sky
#

fun thing, Arma 2 Runs better lol

sleek sky
uncut trellis
#

since many people do not have this kind of issue, it could be something particular to what you guys are doing

#

and possibly fixable

sleek sky
#

we tested simple gunfights, we placed units in eden editor. 10 CSAT vs 5 of us. Gunfight started, fps dropped.

uncut trellis
#

how about in single player?

#

and how is the game hosted?

sleek sky
#

There Explosions also bring FPS down to 10-15, Game is Hosted on a Dedicated Server (Linux Debian 10).

uncut trellis
#

SP?

sleek sky
#

Singleplayer? as said, FPS still drop to 10-15 when explosions or gunfire start (Burning vehicles included.)

uncut trellis
#

that was not clear

uncut trellis
#

no that says just MP is problematic

sleek sky
#

Ahh, you sent an message immediatly after the "How about in singleplayer" mixed that up. So yeah.

Singleplayer has the same Frame issues.

And game is Hosted on a Dedicated Linux Server.

uncut trellis
#

any special video setting optimizations or such in use?

sleek sky
#

but even Explosions Alone, (No AI at all) brings frames down

uncut trellis
#

custom mallocs or such starting options

sleek sky
#

Absolutely Nope. didnt touch anything there.

uncut trellis
#

GPU up to date and no fancy "GPU enhancement settings on"

sleek sky
#

GPU is up to date, no settings changed.

uncut trellis
#

they can be on by default too

sleek sky
#

but how likely they would be on for the whole 7 people group?

uncut trellis
#

not many people touch the default settings

#

¯_(ツ)_/¯

sleek sky
#

True. ill check.

uncut trellis
#

when I installed my new radeon Arma ran quite fine but when I disabled the fancy enhancements I got +20-30 frames from it

#

just a thought though, no guarantees there is anything there

sleek sky
#

Lol I opened dxdiag and the whole computer just bluescreened lol

uncut trellis
#

well that does not sound good

sleek sky
#

But there's no fancy stuff activated

uncut trellis
#

well some other gpu issue could be present too if the bluescreen happened.

#

has video settings been autodetected?

#

in game

#

and have you tried resetting your game profile?