#arma3_troubleshooting
1 messages · Page 109 of 1
It's kinda
It's not really the interference but something is definitely broken
Anyone got an idea?
It's 3440x1440p
21:9
It also leaves a small transparent gray square which is annoying
Have you adjusted UI options for it?
The only size I can put is Small
Anything smaller or larger than that & it'll just appear broken as hell
Show your Ui settings
No the one that says display
Refresh the imgur
I don’t see any artifacts on that image
Wdym
Don’t know what that means, speak English
What do you mean
I mean the view from cockpit looks ok on that page
I mean background image from cockpit shows fine
Draw circles around anything that is out of place.
Alright
So that ppl don't have to guess
I already showed you before
If you checked the imgur photos I sent you before
There's a red square on the grey square that appears
It supposed to cover all the screen, not one small square
If you reduce your brightness, you might notice it
Nothing here
Thats because of the menu
This makes no sense
Dude you got to make the thing visible for us
Does it show when you get out?
Surprisingly I don't know how but I'm not seeing it rn
You don’t know how to get out from the choppa?
I do know,
What is rn? Seriously want to stop replying to you
Don’t bother
No draw arrow to point at it.
I’m done here
The last pic was just jpg blurry mess
I really cant make it more clear
But if you look at this small example of the bottom right corner
Then look at the full photo
You will be able to notice the grey square
I am sorry if I got you guys frustrated .
This is not live game though?
It's live
What's with the red lines?
That red square covers the area where the grey square appears
So you drew it?
Yes, I drew the red square to show the general area of the grey square
No.
Does it show in other vehicles or on foot?
Looked like the stupid vignette overlay on the development branch. You can remove it by pressing the pause/break key.
Whenever i land a Xi’an the thrust goes all the way up to 100% making it really difficult without damaging the Gear, how can i fix this?
so nobody knows how to switch ace medical to basic
its been stuck in a weird mix of basic and advanced
@charred mural Read the blog post it will explain the changes
https://ace3mod.com/2019/12/31/ace3-version3130.html
what would be the script to add one item of choice to a crate I'm looking at?
I've been using cursorObject addWeaponCargoGlobal ["B_Competitor_F", 1]; but it's being glitchy
Anyone know why the zeus camera seems to become an object that can kill units if going over them at a certain height?
The hell am I being shown a Illegal copies may degrade message when joining as client to a server I own (well, happen to be renting)? The client version of the game is bought from Steam
Could have been an issue with Steam API, or you're not in online mode
Online I am (in Steam). Restarted the game client just in case. Still getting the message. Could be because of the Steam API? 🤷🏼♂️
Illegal copies may degrade
Wait, does A3 have some funny in-game anti-piracy measures like A2 did?
Yup, it actually does the same thing
FADE
hi, I'm having a strange issue: steam keep download 24 gb mods from workshop even if I don't have a single item in my subscribed list. I've tried restart and delete everything inside my workshop folder but it keep download at every restart
The usual steam hickup. Did you by any chance join a modded server lately?
Nope, I almost never use arma 3 launcher
@solid nova zeus logic is an object, it doesn't become one.
it should have no collision tho 🤔 never had it hurt anything even when flying directly into things
My friend is getting an error when he tries to join a dedicated milsim server about ace advanced balistics x64 not found, how can he get it fixed
please ping me for an answer
Battleye might be blocking it
Thanks for replying;
1 ace is installed
2 it's from the steam workshop and it should be. I went over with him trying to install the ace advanced balistics thing from ace's website but no luck
3 I dont think it's battleye because we all have the same mods/files but it happens to him only
please ping for further replies
@clear ledge Unsubscribe and delete ace and re-download it
@quaint jewel Its a really odd one, that only occurs at certain heights, then the effect stops if the camera hits the floor. I'll try to replicate it today since its really weird.
does anyone know why ace medical doesnt like work at all me and my server?
-problems:
wounds randomly apeared.
Bandaging would take varying times to patch up
When patched and you used surgical kit it did not remove the wound
Paks were not usable at all
Morphine only worked 50% of the time
Bleed out was too quick
blood pressure and heart rate was wrong numbers
PS. all this happened after the new ace update
please @ or PM me when someone has an answer
@boreal ore ACE got major update that may need you to update a lot of things
yeah my brain hurts after a milsim we tried to do today. it was literally easier for the medic to kill the person than heal them since they would respawn again
Not at all related to ACE breaking, but add a mandatory wait to respawn or as I do, a drive back in, taken very slowly. So the vauge agitation to player makes them less likely to gain an advantage from randomly respawning 🤔
yeah well that wasnt really the main problem, the main thing was what i listed
well I got ace fixed for me mostly to be back on par with basic but morphine really doesn't seem to work at all
maybe for a second
Yep. The morphine got changed around as well, IIRC. They also added being "In Severe Pain" which is worse than being "In Pain" like you're probably used to. When someone is in "severe pain" you have to give them more drugs.
@boreal ore You Need to read the ACE changelog on Github and blog post to understand what changed then redo all your ace medical settings for your missions/server
https://ace3mod.com/2019/12/31/ace3-version3130.html
well I was in severe pain and put 1 morphine in each limp
that should be enough
or not
if not then thats kinda ridicolous
moar drugs... me like... need moar morphine!!! 😉
I can try putting it in my butt and see if that works but it seems pretty bugged to me
it took 3 for me yesterday during testing
Also, you should not boof morphine. It is not good for you.
I doubt it as it went through a lot of testing, but unfortunately most of the devs are banned from here, so you will have to go to the forums, github or the ace slack to get answers.
well i tried 9 now
still didn't help
didn't even put me down to "in pain" still "in severe pain"
Have you properly updated and learnt the settings for your mission/server and read the changelog/blogpost, if not i suggest doing that, and then going to one of the places i mentioned for help, cause no one here seems to have definitive answers yet, as its such a huge change for everyone.
I have updated via steam workshop, am using a fresh mission and read the changelog multiple times
well then you no what you need to do
And then going to one of the places i mentioned for help, cause no one here seems to have definitive answers yet, as its such a huge change for everyone.
You will have to go to the forums, github or the ace slack to get answers.
Not very good at reading ay?
Anyone got an idea
No entry bin\config.bin/cfgweapons/iteminfo.scope.
someone created a "ItemInfo" class in CfgWeapons, which doesn't belong there
some bad mod
What can I do to sort it
Ignore it or remove the mod
Thanks
I tried to make a patch mod to fix it once, before i realised it was only showing a pop up for the 1st of about 20 similar errors and gave up 😂
Yea that mod is f@#&ed anyway especially in MP
Like, it worked 3 days ago, then all of a sudden it just broke
Hi, i know i ask'd that 2 Month ago, but i can't find the Performance Binary, will there be one at all?
You don't really need it, it's not some magic fix for performance, it's used to test changes/fixes, and if they work then they get put into the main game.
yup
Well, it might be that it is not, as you said, a magic fix for performance. But to be honest that was not my question...
Their is no massive bug at the moment so no... iirc the last lot of PB's was for finding a fix to the 1fps bug
You can find the thread for PB's on the forums with google pretty easily
I have a problem with arma 3 more precisely with the ACE mod (see image) I have this error message no matter what I do. I spent hours looking for the problem so I would like help, coming from people who develop mods or who know very well how it works because I got help from a lot of arma players and we was really looking for all the ideas we could and NOTHING, no solution then MAYDAY, I need help.
Thank you
oh
I can't share image
call in pm to more information
you can link an image here.
if its an error message you could also just type out what it says
so I just decided to re-try Contact after a long while, but when I try and continue it, I get a "unable to load saved game incompatible versions" error message? do I have to start all over?
hey, i need help SUPER SUPER FAST!
I Bought a a hosting, and its working with Filezila client, i moved the mods from the workshop to the hosting arma 3 folder, but when i get into game its says that its not assigned or not acceptable key, something like that, please help me!
how to fix it?
@here
@ here doesn't work... or any other global @ stuff
Put the mods bikeys in ARMA's keys folder
are you trying to use custom face?
does it happen without mods?
unfortunately that does sound like the mods you have used got broken somehow
very slight
if normal faces work
oof youre not really supposed to mess with mods like that
if you do alterations, you do a config patch mod that mods the mod
and keep the original as is
💩 just hit the fan man
that wont work
cant be helped, you started your thing totally wrong way
I have a bit of an issue.
My game keeps crashing at the beginning of missions :/
can anyone help?
do you have any mods running?
Nope
are you talking about single player missions?
Yeah
have you validated game files?
👌
thats a start
if the problem persist you should check what the games .RPT logfile says at its end.
I only have 4 gb at the moment but i'm making it work really well
4GB of what?
Ram
ah
i suspect when i get my computer fixed it'll run better
perhaps something else has broken if you have had hardware problems before
you are probably in very minimum specs area there
so anything can happen
Well i had to take out one of my memory cards, which cut my total RAM in half
but that was because it's not very good anyway
Thanks
Hey, I got a bit of a weird issue here. I'm running a dedicated server off a separate computer. I also have a headless client on that same computer. However, when I try to connect to my own dedicated server from my separate gaming computer I am met with the error "Kicked off the game, Steam Authentication Failed". The headless client is able to connect with no errors showing message of the day and all. I can note that the server is being run off of its own steam account so there should be no login conflict.
any suggestions?
I can also note that I can connect to other online servers just fine
I can also note that connecting with a client on the host PC also returned same error further indicating something is wrong with the server and not the client.
The server also returns an error along the lines of "Unexpected appID number x not matching expected appID number y"
did a reinstall of the server software and it all works now so consider the issue resolved.
does anyone else have a problem where zeus can not talk on radio (tfar) while in the zeus interface? Is there a fix or could it be a compatibility issue?
which version of TFAR do you use?
because the latest version (Beta) should work without issues
if not, test with only CBA and TFAR enabled, and report at TFAR Discord and/or Github
all of my mods are re downloading and i dont know what to do
can't do much afaik
nvm i uninstalled f#ck that im done
unsubscribing from the mods on workshop would've been enough
i have 112 mods
Jeez, I don't have that many and it would be a 260+GB download if it had to do it (I had a clean up 🙂 Was 400 GB before)
Just trying to post on the mission editing and scripting forum but when i go to create a new thread the body section is greyed out, I can fill out the title, and the tags but not the body. I cannot reply to threads either....
just downloaded ace and wanted to mess around in editor it has disabled my ability to order my troops to halt using key presses so 1-6 hitting the 6 key does nothing i have to scroll down to use the halt command any way to change this
correction it has disabled all comnds with the 6 key
nvm fixed it
Hey guys, my friend is having issues with voice chat in game. He is perfectly audible on steam chat and discord, but in game his mouth is moving and the game says he is talking, but nobody can hear him, there is litteraly no sound coming from him, please help we are desperate
is he talkin in correct channel?
Make sure that the mic is also set as default recording device in windows @warm scaffold
Also that you guys have VON volume set in the game audio settings
I already did that
The default device setting in windows?
yes default i talk with this in steam chat and discord with no problem
Does a marker / icon / channel appear in game when you press caps?
Or your talk button, whatever it is set to
yup and my friend sees my mouth moving and that i talking
Has your friend checked his VON audio level in the game? Some turn it down on public servers so they don't hear the nonsense
Have you checked your in game AUDIO settings (or your friend)
Sorry, I'm out of ideas then since I never used VON. I use TS and Discord
Maybe somebody else can come up with a solution
Me too... never had an issue with VON... You are sure that you are on the same channel as them?
Yes man i tried in every channel
Does direct speak even work?
yes i i hear every around me and i see that i'm talking but they can't hear my
what button switches view to the gunner screen?
ENTER
I press "Zoom in" and it just zooms into the viewport.
enter didnt do anything @delicate elm
yes i i hear every around me and i see that i'm talking but they can't hear my
There goes my last hope. Sorry, can't help
i got it
Yeah, I had a brain fart... is ofc ADS, so right click for me... 😭
how tf do I get the mim 145 to shoot planes?
I placed a radar
and it next to it
and it wont target the buzzard jet I had fly over.
Ayo my arma 3 is in black and white when im in game not in the menus any one got a fix
Did you look through your video settings? I think the third tab has some sliders in that regard. Are you running any mods?
That is not a bug I've heard of before, it certainly isn't normal behaviour. Do you happen to play on a persistent server like exile with ace? only reason your game goes black and white with ace is when your very low on blood.
@normal ice ^
No it is black and white from the get go
on a server?
if its on a server, try placing a unit in the editor and playing as unit, if it doesn't if go black and white then its the mission/server that's broken not ace
anyone know the issue of a really long game intro and when it's done and you try to start a scenario or simply try to go into editor the game crashes with the reason of "Too many virtual memory blocks requested"?
Profanity removed
Nice
I know I’m not saying no or complaining
@atomic bridge ask in #linux_mac_branch
No, that would be crossposting
i was going to delete whats here
Thats fine then
ok
sorry if this is more of a hardware topic, but whenever i alt tab out of arma my Pc runs extremely slow and sometimes my arma crashes due to it, is this just an arma problem or hardware? if needed i can post specs into hardware
sounds like a hardware problem, because Arma would still run in the background (taking a lot of resources) while Windows is not in "sleep" modus anymore (and thus also taking resources).
simple test would be to run in Window mode (which should also be slow) and using the No Pause mode (which should be faster when tabbing out of an SP game)
souns like not nuff memory
ok ty, I have 8g of ram now so ill look into getting more
omg steam says i have to resintall arma 3....it was wiped out apparently from my hd even tough it's still there
Steam has a bug where it occasionally forgets games
so a friend of mine has been having issues of his game crashing the minute that he loads into a map, this both occurs for multiplayer as well as single player, has anyone had this happen before and if so how did you fix it
corrupted map? either reinstall the mod or verify game files if its a vanilla map
arma 3 units page down for anyone else? https://units.arma3.com/
I'm stumped on putting optics on AI units via config.cpp right now.
You have to make a new version (class) of the weapon, at the top of your config and add the attachments there then call that new class of weapon on your ai
Can I post my PasteBin on the config file?
{
class rhs_weap_M107;
class 85th_M107: rhs_weap_M107
{
class LinkedItems
{
class LinkedItemsOptic
{
slot = "CowsSlot";
item = "rhsusf_acc_premier";
};
};
};
};```
You declare a new class like this at the top of our config, then add the class to your ai so in this example the weapon class you would add to your ai would be 85th_M107
For the other attachment points look up "LinkedItemsOptic" on the biki and the other attachment points will be linked at the bottom of the page.
I tried that and only the weapon is showing on the AI unit, no scope
Look at how its implemented here, the new weapon class is declared at the top of the config, and then added to a crate called "M107 Crate" on line 1018-1019 https://github.com/85th-PMC/crates/blob/master/config.cpp
If that doesn't help, best move the convo to #arma3_config and post your config, those guy will be able to help more than me 🙂
I tried using a vanilla weapon instead of CUP weapon and it's working. I don't know if CUP Weapons operate differently
might have a different name for the attachment points, ask on their discord
Is there any way i can "ban" the shacktac mod? Since its client sided, some of my members use it, even though we dont have it in our modlist, and it gives them an unfair advantage on the field.
not using verify signatures?
you can add a script to init.sqf, that checks if the CfgPatches class exists, if it does, kick them
@quaint jewel im not sure what any of that means, would you mind sending me some link to a tutorial or explaining it please?
@spare shell
See "verifySignature"
https://community.bistudio.com/wiki/server.cfg
ty
Hello I have problem with using scopes and aiming. When I aim and use numpad + to scope more stuttering begins. You know what cause that problem?
that's called "breathing". rest your weapon on suitable surface and / or stabilize it with left-shift
My problem is when I scope more my game turns into PowerPoint presentation
It seems like it's rendering problem
Try disabling PIP completely and try again. If this solves the issue put it higher step by step.
Ok
Hey y'all.
Anyone have tips for troubleshooting a:
0x0000005 STATUS_ACCESS_VIOLATION
🙂 ?
I have tried and googled a great deal. There seems to be a large list of possible causes.
from biki:
0xC0000005 - ACCESS_VIOLATION
This error is very generic. It may be caused by many issues, such as a hardware malfunction, a virus in the computer, but also an error in the game itself. Possible solutions:
- Try joining another server, then rejoin the previous one.
- Update the graphics card drivers to a newer version.
- Rollback the graphics card drivers to an older version.
- Check the temperature of your GPUs and CPUs.
- Verify the integrity of the game cache using Steam.
- Re-install DirectX.
- Uninstall the Visual C++ 2013 Redistributable package (both x86 and x64 version), restart your computer and install the package again (do not use the Repair function).
- Run a Windows System File Check tool to repair corrupted system files.
although it can also be a virus scanner blocking files of Arma
@weary sky You're right. I should have copy and pasted my email to BI support (which wasn't answered). I have tried a great deal. Here is:
Since today, after ~500 hours of play, I am having consistent crashes after a few minutes of gameplay in missions. Missions can be single- or multiplayer, or in the editor. Never in menus or briefings; only during gameplay.
The gameplay situation is never the same. Sometimes it is when interacting with objects, sometimes when entering a vehicle, when looking down a scope. Sometimes it is during a respawn.
The result is always the same. A direct crash to the desktop. The following error:
0x0000005 STATUS_ACCESS_VIOLATION
Not a single device driver has changed in the past 3 days (I keep tabs on this for security reasons). Arma has not had an update. My CPU, GPU, and memory have never been overclocked and are well within temperatures. Other demanding games run without error.
A reading of the (several) RPT files share this repeated error:
Unknown module
(the exact Fault Address and filename changes depending on the mission)
I run Arma with all the purchased DLC, but without any mods. I have verified the integrity of the game files. I have removed the files in "C:\User\AppData\Local\Arma 3" .
I think that covers all the suggestions mentioned in your Wiki for this error.
Do you have another?
Much thanks! This is a wonderful piece of software.
This reads as ungrateful; my apologies. I welcome your suggestions! I am just bitter 😦
I didn't try the Visual C++ reinstall. Will do that
a 0x5 error simply means "Access Denied", so the game tries to access something but can't.
This can be on the HD (eg. file is removed by VA, locked by having a file open in an editor) or from memory (eg. game can't read part of memory).
Unfortunately there's no "one-solution-to-fix-them-all"
@weary sky Thanks mate. Coincidentally I reinstalled Visual C++; no dice. What does "VA" stand for?
AV = Anti Virus (messed up the order 😉 )
Did you also got an error by Arma 3 itself (with the error code)?
Guess it gave a STATUS_ACCESS_VIOLATION or similar
No...
no
Was instruction at ... referenced memory at ... that could not be read
It usually means a RAM issue, or a script/mod which tries to access RAM but messed up.
Although sending the dump file to BI will most likely give better results than this Discord.
👆
idk where the dump file is
i get it when i try to configure my loadout
i couldnt find a dump folder or any file with mdmp extention
This can be on the HD (eg. file is removed by VA, locked by having a file open in an editor)
no it can't, its just a errornous memory access.
from memory (eg. game can't read part of memory).
yes that. but it tries to read memory that never existed.
It usually means a RAM issue
not really, usually its wrong input causing whatever to read a address thats not there.
if your game crashes, get the crash report (like the "your game crashed" dialog already tells you) and report it on the feedback tracker (like the "your game crashed" dialog already tells you).
Then try to verify your files in steam and try again, if crash still happens. wait for the feedback tracker report to get an answer.
How would I fix this issue? it only occurs on servers regardless of mods being installed/loaded, Ive reinstalled the game twice in an attempt to fix it
I see multiple issues in that image, define which one you want to fix
the lack of an options menu
have seen that before, when I wrote a mod which broke cfgfunctions 🤔
@long steeple Does it happen in vanilla servers without mods, like a official Zeus server, if not then its one of your mods or a mission, never seen whatever mod is adding that PBW button.
@supple crystal Pbw is a bundeswehr mod, and yes it does, anytime I'm on a server the issue is present.
servers without mods?
Doesn't BWMod use CBA... Is that some ancient version of BWMod
Either way if it happens on vanilla server and mission without mods as well and you have reinstalled then maybe your profile is broken, try making a new one.
@supple crystal It happens anytime I'm on any server, I'll do that, I appreciate the help
@supple crystal I used another profile and it made no difference
¯_(ツ)_/¯
agreed man
Hi! Today when playing as Zeus and using fire support (155mm) module game froze for sec and than this wird error showed up, now every time using basic modules its poping out. I tried repair all mods and game files. Any idea what could it be? https://imgur.com/a/EMSO4WA
It's something ace mod related. Possibly you are running wrong version of ace. Use the official release.
Is the one on steam not official?
There are both official and unofficial ones on steam @vestal plover
I got the one from acemod, plus I reinstalled ace mod and bug still appear
Could also be another mod like Achilles or Zen which hasn't updated to the new ACE update
as a matter of fact, whats better. Achilles or Zen?
Zen
Zen is better maintained, but is still missing some features that Achilles has.
I would love if they worked together
But for some reason it keeps causing my zeus interface to stop responding and ARMA locks up unable to respond to input
Like it’s not frozen
Everyone else keeps moving
I just can’t do anything
Do you run both? Or have too much mods active?
so my arma randomly just gets blurry and i cant fix it
ive restarted it and done everything i could think of please help
When I’m on Zeus I tell am helicopter or s jet to fire at a target and all it does is fly over a bunch of times how do I fix that?
Jets/Heli's have always had questionable reliability attacking zeus designated ground targets, your better of jumping in remote control.
My favourite was when the blackfish used to think it had forward facing guns 😂
@subtle drum ^^
Also don't crosspost it's against the #rules
I am trying to play Vindicta but I can not find its mission in any of my menus. I think it is considered a mod so it wont show up Data Type: Mod
Mod Type: Campaign. Any ideas?
@barren scarab Host server from the server browser select online or LAN if you want SP, choose the map Vindicta is set on and then it will be in the list of available missions for that map.
https://i.imgur.com/WpUavOg.png
How fix that?
by not using the arma tools launcher at all. @terse fiber Look up PMC wiki arma 3 tools and p drive setup guides.
ACE 3 seems to be brooken bad does anyone know how to download previous patch?
Steam Workshop is full of alternative downloads
but do you remember what number the previous was?
3.12.6 is last before medical update
I'm having a issue with battleeye, I cannot install it so I can't get into servers, I've tried verifying the integrity of the game files already and it still doesn't work. any ideas?
check if your anti virus is blocking it for some reason
I've put it as an exception on my virus protection already
If I launch the game without BE installed the window telling you what it does pops up signalling that's its trying to install, it just immediately fails
@charred mural official download source is ace github, which also has all previous versions.
Don't grab old versions from workshop, they might have whatever in there.
Just wanted to report back. Fixed the "status_access_violation" error. Thanks for the tips.
BI had me installing third party registry cleaners (with adware), reinstalling the game, and throwing away my user folders.
None of it was necessary. A solution was to change a startup parameter "malloc = system". As in change how the game handles memory.
Of course not ideal, but no change in performance, and it works. Hope others can use this fix as well.
@brave hawk that should probably made the first hint on the biki page about that error.
That and verifying steam files are the most sensible thing to do.
But instead people tell others to reinstall drivers and other bullsh
bullshbeep? 😄
Yep
I can't find a single wiki page with a search for status_access_violation
Just notifying the wiki department lead ofc. So he can create a ticket for it to be done
0xc0000005 maybe?
but no 00005 in sight
oh there is, nvm
ACCESS_VIOLATION and that's it
not a single note about memory allocator
Maybe the crash/troubleshooting pages should me merged someday
default is system?
"system" would be the Windows one, maybe less performant -but- safer, right?
(yep, TBB4 = default)
@quaint jewel @ionic hawk note added.
https://community.bistudio.com/wiki/Arma_3_Unusual_process_exit#0xC0000005_-_ACCESS_VIOLATION
Yes safer. Thanks boss
Anyone able to give me a hand with some clothing configs?
Have had a look cant seem to see any issues
If anyone wants to see the code: https://pastebin.com/EpBsguDz
Using Trky/Multiplayer Uniforms
and what's the problem?
Not showing in game, ie arsenal etc
are you doing something to them besides just using them from the original addon?
no sir
is there a error message or something like that?
are you sure you are running the addon
is this the original mod or in a mod pack
it will be going in a modpack not in the original mod
The config in pastebin is completely messed up...
classes are incorrect, variables missing or incorrect, I only see uniforms but no units which wear them... etc
I think you might not want to use it
also, modpacks can be tricky especially if you want to upload them into workshop
you may want to look up how to put together a collection instead
i will be using armasync or googledrive to upload
sounds fishy but ok. 😛
steam workshop and collections is the simples way to put together modlist
most stuff that is not there is not updated to latest standards anyway
Yea don't use TRYK its extremely old and kinda garbage looking, so many better options, unless your making a life server in which case, you don't have many options 😂
can somebody help me just put ace on our dedi server and get this error: "client/server addon mismatch. client has extra addons : ace compat rhs usf3, ace_compat_rhs_gref3"
The answers right there, the clients have the RHS blue/green compat but the server doesnt
but i've uploaded all ace compat mods?
i've also checked in the ace files for both server and client and their exactly the same
Try downloading them again, where did you get your copies of ace?
from the steam workshop
ill download again it seems the issue is with the ace mod itself
do both client and server have the official one uploaded by acemod steam account
yes
im still getting the same issue
@fringe salmon
check your server RPT files
trying to now my interweb is crapping itself standby
anyway i can link it somehow?
so for some reason the ace compat mods arent being picked up by the server
arent being picked up by the server
what does that mean? they are not stored properly, or not loaded by the arma server application ?
not being loaded by server application
you need to add the mods to your launch params ofc
yes they are in command line although some look like this "ace_-_compat" not sure about dash?
wrong command line entry. that's not how the mods are called
if you have spaces in the names, you need to set it in ""
-mod="mod1\;mod2\;mod3"
that's how it should look like iirc
ok mine look like this @mod1;@mod2;@mod3;
ok, but what does you folder naming looks like?
im using nitrado if that makes a difference
if your folder naming is like @mod name something it has spaces in it. then you need it to be set in ""
so i need to go through and put "" on all my folders that have spaces?
no...
-mod="@mod name one;@mod name 2;@modname3_whatever"
just at the beginning and the end of the mod line
i see, so using underscores where there are spaces is useless
but the names within "" must be the same as the folder names
i see, so using underscores where there are spaces is useless
exactly
ok that explains why none of the mods with spaces are working thank you so much youre a lifesaver have a great day!
youre a lifesaver
not what she said... according to my ex i destroyed hers 😉
you're welcome 😄
@plush nexus there is nothing else to explain about it
memory is stored in blocks, and there are only a limited amount of them. So if Arma suddenly needs too many, it can't request any more and crashes
@quaint jewel To fix low efficiency
What should I do on the server?
We are an add-on server ...
low efficiency?
do what, prevent the crash?
yes..
try the system allocator. -malloc=system parameter
thank you
@plush nexus Do you happen to be trying to run PMC super large scale maps or the south east asia map?
Hello, I'm having some issues setting up my server, when I set a line in the server.cfg password = "password" even if I put the right password in on the launcher, I get a wrong password error message, if I set it to no password, my friends and I can enter the server perfectly fine
I've tried with a variety of passwords, and any password causes the error response
Hey where do the presets save to on the launcher as I keep deleting a pre-set but everytime I reload the launcher it is back.
my fps is garbage in some modes in multiplayer
i tried fixing it by tweaking graphics settings but it doesn't seem to do much
Some gamemodes/mods might be build badly and that can't be helped.
Well it can...
not from regular players standpoint if they want to use them.
I was more talking about mod devs...
@fringe salmon careful 'tweaking graphics settings'..... Lowering some settings can pass more load to the cpu which arma is already heavy on. I always find that just using things like nvidia's geforce experience game optimiser for nvidia is best
just don't expect 60fps in multiplayer unless you have a super computer
and even then it depends on the mission and used mods
Hey guy! I have a problem with flying the helicopter
Yesterday flying was normal, today, I barely can gain any lift when I lift off and can't get up to speed and I crash because I can't go fast enough.
I haver the logitech 3d extreme and use DXTweak2
Do you use the standard or advanced flight model?
Hm then I dont see why it should be different, is it in the same conditions?
No idea, it's just weird how I lift off slowly
and can't pick up speed to gain more that 15m height
Does arma require a lot of ram?
i have bought new ram so now i have 14GBs
i had 6GB before
14Gb is sufficient to run Arma 3, the minimum practically is 8GB but 16GB is recommended.
I fixed my problem. Turned out when I mapped my joystick again, it duplicated the controls
Has anyone ever had an issue where people can't connect to a server via direct connect? I've setup a dedicated server and verified I can connect via direct connect; however, no one else seems to be able to join via direct connect, they don't see the server in the list.
Is this server hosted somewhere else or in your home network? If the later then there is a decent chance you are getting routed locally and your NAT is stopping remote traffic and you need to open the ports to allow them to access it
It's hosted by OVH, so it's in a datacentre somewhere. Ports 2302-2305 are all open, I even went as far as disabling the firewall in its entirety for a few minutes and even then they couldn't see it.
Looking through the RPT, there are a few things that stand out, but I'm unsure if they'd be the cause since I can still connect and start a mission with no issues:
Warning: Current Steam AppId: doesn't match expected value: 107410
8:40:43 Unable to initialize Steam API.
8:40:43 SteamAPI initialization failed. Steam features won't be accessible!
Yeah, that was the first thing I checked, it's set to the right ID but still spits the error.
No idea why it's doing it, but it doesn't seem to cause an issue.
wrong working directory?
Don't believe so, RPT file references C:\steamcmd\steamapps\common\Arma 3 Server and the steam_appid in that is the correct one
whats up boys can i get help? my game keeps crashing on start with a modpack for my unit and i cant get it to start
Initial crash text: bin\config.bin/CfgVehicles/LIB_Truck_base/AnimationSources/HitLF2Wheel/: Cannot find base class 'HitLF2Wheel
Then it says The exception unknown software exception (0x0000dead) occurred in the application at location 0xdbfa908c.
Modpack: file:///C:/Users/Fenner/AppData/Local/Temp/CLEMCMODPACK1132020.html
Ima get my specs in a second
@twin lark mod in modpack is broken.
Processor: AMD FX(tm)-6350 Six-Core Processor
Installed RAM: 24.0 GB
64 Bit OS and processor
AMD Radeon (TM) R9 200 Series
oh
@regal bobcat whats your definition of terrible?
also move it to #hardware_vs_arma
and stop spamming @regal bobcat
@quaint jewel high 20 to low 10 is what he gets
You probably want to post his video settings, but you should start posting in #hardware_vs_arma
I've gone through every setting I can thing of so at this point I'm starting to think that it might have been a clientside problem, since I could connect myself. Sounds unlikely though.
Is there anyway to clear your presets for the Arma 3 launcher I am currently having the issue with presets re saving them selves and appearing
Presets are stored in %LocalAppData%\Arma 3 Launcher\Presets to my knowledge
Why does my gpu go to 70C° in the main menu of arma 3?
what GPU?
Sounds like more of a question for #hardware_vs_arma, but there's a lot of things that could affect that
rx580
@quaint jewel What're the rules on reposting an issue? Still need help but my initial message is pretty far up now.
He posted in #hardware_vs_arma after I told him it existed, I think he posted it here initially by mistake.
@mighty delta Try moving your question to #server_admins , #server_linux , #server_windows which ever fits best, those chats are a lot slower.
Ah, will do, thanks.
@mighty delta its not that far away. There is no specific rule, spamming is relative.

whats up with the ace medical.pbo outdated or is that just me
well lik when i start the editor and try something it would just kick me out of the mission with that error text
@grim tinsel
Can you provide the full error message?
Make sure that you have the newest version of the official ace addon @mossy gust
And also that you dont have any other mods loaded that interfere with ace medical
unsubscribe from it on the workshop wait a bit, rescubscribe
And it should always update itself but stuff can always go wrong
ace compatible mods
remove stamina
ace interaction expand
Try loading half of your modpack, if that works try loading half of the other half and so on until you find the problem @mossy gust
Thats the way I usually do it and it works well
ori thx ill try that out
So, I am playing through the Arma campaign and am on the mission Radio Silence. I mortar the towers, then kill the rest of the AAF guys with my rifle. My objective is to "Seize mike-26," but nothing seems to pop up, even if I am standing in the middle of the compound.
What do?
Make sure that every enemy AI is dead
There are either enemies in hiding or you've missed something
I feel like I've taken down all AI, so anybody got any clue on what I could be missing?
@delicate thistle re-read the task description, I cant remember the task myself but maybe that says something
from last update you need to fire 5/10 bullets to the AI before to kill him
If anyone is on Arma, can they try and direct connect to 54.37.244.155 port 2302 and see if they get a server listing?
game occasionally crashes on opening map
cool
what's the error msg?
without a proper description of your problem, nobody can help you
It doesn't display any
It's difficult to explain
it freezes but doesn't allow any other apps to pop up
Whenever I alt-tab to other apps, the screen turns black (except the windows toolbar) and the red map-crosshair is visable
modded or vanilla?
Modded
CBA_A3
Overthrow
HCC High Command Converter 1.5.5 (bug happened previous to installing this)
Advanced Combat Enviroment 3.12.6
in this case, could be anything
Alright, just making sure it wasn't some common bug or anything
fullscreen or fullscreen windowed mode?
fullscrean
try fullscreen windowed
whenever i press play on the normal launcher my game crashes but when i launch from the local files its fine
does it give you an error?
No just freezes then crashes
using any mods or completely vanilla game?
Uh idk I got the vanilla version but it says Malta and that zues ad on thing is there
Ye I did and that didn’t work but I can join a multiplayer server off the launcher and it’s working but I still can’t press the orange play button cause it crashes
the launcher crashes?
Uh I have a setting where the launcher closes when I press play
But the game itself crashes
I think I got it working
what did you do? 🙂
I have an addon server.
30 players connected (many players connected)
[Too many virtual memory blocks requested]
An error occurs
Can someone help me?
Can anyone help me with a big problem that I have
I'm trying to join a friends server, we been playing for the last week but every now and then I just get stuck on the loading screen I'm able to hear the game and He says that he is able to see my player model, but in my screen I'm just stuck
We are playing with mods, I been loving arma but I'm really getting tired of trying to play the game and not been able to.
HELP
Hello, I have a problem with Arms 2 x anniversary edition. I see most here is about arena 3. Can someone tell me the right place to go to ask a out arena 2 please? Thank you!
Sorry typos. I of course mean Arma
@acoustic atlas >> #end_of_life_arma
Thank you!
anyone know why liberation isnt showing up in my map list on my server after i have subscribed to it on the workshop?
did your server subscribe too it too? did you move the mission file into the correct place on your server?
im trying that again now, i think i actually had weird windows file permission issues
gimme a sec
is it normal that when you update your server with the .cmd file, using your credentials, it boots you off your steam?
where are the .pbo files now when subscribed from workshop?
Hey guys! I was hoping you fine people could help me with a super annoying bug that i am experiencing atm... My Arma3 has no sound whatsoever... I have tried googling n searching the webs for answers/fixes but have come up shorthanded...
Any advice ?
@lusty hemlock Are you using Win10 and a USB headset?
i indeed am
It's a known issue with no 100% fix other than using and older version of windows or getting an AUX headset, the cause is unknown but it's suspected that its a combination of USB headset + Win10 + Realtek audio drivers from after 2012ish
Do a windows search for "Realtek" would be interested to know if your motherboard is using it.
@lusty hemlock ^^
hmm
fyi its something windows has to fix not bi
yea
@lusty hemlock I had the same issue, but I use windows 8 so I don't know, but it's worth a shot
Go into parameters and change your core count from default to 2 or above
Could someone help me out? When I launch ARMA III, I'll be in the main menu and it goes from over 200 frames to about 16 and then repeats that over and over, even while in game
Bad advice @proud osprey Its a known win 10 problem.
Sorry, was just tring to help, I knew doing this fixed a similer issue for me
I understand, but he already acknowledged that he had both components of a known problem (Win 10 and a USB headset).
@rocky ore This is the place to discuss Troubleshooting issues. So you've told us what the error message was my launcher has detected that arma 3 was closed unusually now explain some background information. How long have you owned Arma? Is this the first time its happened? What are the specs of your machine. In essence, basic troubleshooting information.
i have arma 2 years
@desert isle I have a Bluetooth headset so the problem was there before I got it
and I removed arma once because I had a little space
i speak you later
i am trying to download a mod from workshop but when i hit subscribe, steam doesnt download anything
check the launcher
says mods are up to date and steam is online, but the mod is not there
nvm
trying to set up an RCon for my arma 3 domination server.
went to my tadst directory, went to the profile running the arma3server executable, went into the battleeye folder and madeBEServer_x64.cfg
inside i set it up with ```RConPassword <mypasshere>
RConPort 2301```
yet everytime i try to log in with any RCon tool after the server's booted up using my virtual box's IP, port 2301, and my rcon password it always says failed to connect. anyone familiar with how to set up an rcon tool?
Well @rocky ore you even quoted it in general chat
if you encounter an error that you cannot solve by yourself, please report it to feedback tracker, of contact out support team
why don't you just do that?
So you wil mods via steam that is easy you subscribe the what you want and check the launcher tthan cane you se that the mods downloaden automatic
i think he is asking if you can see the mods you got from steam and see them in the launcher
I think he's having a stroke
Could someone help me out? When I launch ARMA III, I'll be in the main menu and it goes from over 200 frames to about 16 and then repeats that over and over, even while in game (sorry for sending this a second time but no one got back to me the first time
@clear quartz GPU might be overheating and throttling speed?
Hm, I'll have to take a look
It's neither of those things >_>
CPU: AMD FX-8350
GPU: AMD RX 560
RAM: 24 GB
Motherboard: Gigabyte GA-78LMT-USB3 R2
I actually have the same CPU and the same amount of ram 😄
but I have constant 200 fps in main menu
Yeah, dedmen, you mind if I send you a gif of my FPS in game?
!issuewarning @shy pumice profanity
Done.
not sure how a gif is supposed to be helping
I assume you have maybe some programs running in the background that are causing issues
- Zero tolerance policy regarding offensive behaviour,
this includes harassment, name calling, racism, sexism, homophobia, other derogatory remarks (profanity) or any insults.
That's actually not the issue because I know people with the EXACT same specs that I have and they run the game just fine
nah thats not the issue
bottleneck would be somewhat stable low fps
@clear quartz did you close all other stuff running in the background? especially webbrowser with maybe youtube running ?
maybe antivirus
Let me close the anti virus but I did close everything else
no other programs would give consistently slow frames
if you are just here to troll then I suggest you stop.
Also check in task manager whether you have enough ram available, but that shouldn't be the problem
Links to imgur are allowed
vram could be, but shouldn't be a problem in main menu
cause he has a very high end
Its a FX-8350... Thats not high end, and not very
and triple channel ram
The CPU and mainboard only support dual.
or if ur using an 8gb and 16gb stick then their not cooperating enough
could also be 2x8 + 2x4 (what I have)
!issuewarning @shy pumice profanity after recent warning, ignoring instruction of moderator
Done.
!mute @shy pumice 14d
Silence!! ò_ó
...
I keel u, @shy pumice!! Ò_Ó
Now you have enough time to read the rules
It might just be my vram but I don't see why it would be affecting the main menu
And it's actually 3 8gb sticks
@clear quartz have you tried enabling vsync in video settings?
I believe so, let me try that real quick
if you did, then you wouldn't have 300fps in main menu
I have it disabled now but I think I've tried it and it didn't work, let me reactivate it
Besides that. Do you have a usb headset?
┬─┬ ノ( ゜-゜ノ)
does it drop lower with vsync then?
do the fps just drop, or does the game freeze for a short period
The game freezes but doesn't say it's not responding
Well, freezes, drops, then comes back up
ummm im having problems joining servers
wait nvm all the servers im joining are in Livonia
whenever i reinstall arma it automatically reinstalls all of my old mods that i do not want, can someone help me with this?
unsubscribe from the on the workshop
ty bro ly
How can I force steam to move the location of Arma 3 onto its existing installation on another drive? Because Steam thinks its not on my computer at all, a hard drive was unplugged earlier but Steam still misunderstands it after restarting the computer beforehand.
I have a slight issue, was able to join my friends private hosted session for months and now I cant, doesn't even show that im joining. It just says "connection failed"
There's no option for moving Arma 3 to another library within its properties.
Sorry, I'm not sure how to fix that without enough detail.
Trying to power my computer up it powers on all the fans spin like normal and then it turns to a red light and begins to just beep and will not show anything on my monitors and I have a red light flashing on my mother board aswell
Looks like theirs a CR19 next to it
what motherboard?
if you have a manual of yours at hand, you can look up the error beep / flash codes
You know what your motherboard is @fringe salmon? If you do, you need to search the model and also the beeps in conjunction with the red light. Motherboards generally have "beep code" systems which are basically combinations of beeps and lights to show different errors.
Well that too.
common problems can be:
RAM not well seated
GPU not well seated
No idea what mother board I did not build it i bought it 4 years ago
Oh okay, you still have a box or anything for it?
open up your case and look for the printings on it
Ah, that could also work.
But yeah, I'll let Audio help you for easier communication Justin.
appreciated, but you are still free to step in if you have helpful thoughts
Yep, all good. Not sure if you seen me get back to you, but sorry for a misunderstanding earlier.
I don't understand direct people well if you're like that (which is okay).
i'm german, it's my genes 😄
@fringe salmon
any update?
Not yet can’t find the name of the mother board issac is trying to help me but it’s hard to hear him
By the way @wise barn, he can now hear me well. I had noise-cancelling enabled on my microphone for some reason lol
👍
Well we found that his graphics card is likely bricked.
that's unfortunate
Yeah it is @wise barn, but at least we narrowed it down.
I want to know how to fix the error.
Ask for help.
tried the other headset
still nothing
so annoying that Windows have to duck it up.... Have worked 100% perfect up until now
literally cant play the game that i payed alot of money for and have sunk 100s of hours into
Was the headset a 3.5mm jack?
@fringe salmon I know im late to the party but you should download a program called speccy, it tells you a great deal of information about your PC without having to open it up its great especially for noobs like me who will likely break the inside of my pc just from staring long and hard enough alone . https://gyazo.com/533ce77e46375e75e609e315df1436a9
Anyone else have an issue with the standard variant (none pod version) of the CSAT Taru not allowing more than one person inside in Multiplayer?
Like despite the multiple seats in both the cockpit and loadmaster being there, I can only have a pilot and no one else in the helicopter.
never seen/heard of that before, sounds like a mod/mission breaking something
Although it is a heli DLC vehicle and its possible the loadmaster is set as a DLC seat, sure they aren't getting the "purchase DLC" message in the top right of the screen?
@fringe salmon speccy shows wrong info on modern hardware
Does it? Thats wierd
@fringe salmon HWmonitor is better
Thats wierd thanks for the info
@runic knoll using ACE by any chance? Because the Arma trigger checks only for explosives placed with the default system if i remember correctly
Ace is a mod (Advanced Combat Environment)
If you have it, just unload it and restart the mission
Hmm ok so im really new to arma 3, i have what i think is a simple enough mod, but it is not working and i have a nagging "the solution is really simple but you don't know what to look for" type deal.
mod you made or mod you subscirbed to? if latter, what mod is it and is it enabled in the launcher
oh uh that was fast
its this mod
i subscribed to it but it seems to be a "hands on" type deal
for adding a resupply helicopter into mission with a command for it to come in
i followed the mod instructions with a test mission
so set up a vehicle, set up a dude with the
"this addAction ["<t color='#00FFFF'>Call Resupply Helicopter</t>", "ResupplyHelicopter\resupplyClickonmap.sqf", "B_Heli_Transport_03_F"];
in his attributes init
so that all works
until i enter into the test and scroll over and hit the "call heli" option
at that point a dialogue box pops up saying resupplyClickonmap.SQF not found
i have tried both putting resupplyClickonmap.SQF directly into the mission folder, or leaving it with the other resupply heli SQFs in their respective folder
it is pretty old so there is the possibility that its broken
dang, well the mod maker was still updating as of last june
but in general like
should this just "be working"
if you followed all the instructions then yes I suppose so
did you put the mentioned folder into correct place?
is there any error messages?
oh you mentioned the message
well that indicates its placed in wrong folder
well i can try again
but like i also already said i have tried putting resupplyClickonmap.SQF in both the mission folder itself
as well as drag and dropping the resupply heli as per the mod instructions in full into the folder
but both times it seemed to not work but i will test it again
just to make sure the mission folder is the one you have saved your mission as?
Yes, going by the kind of rough english of these mod pages i think the instruction is to take (resupplyhelicopter mod folder) and but that inside the (mission folder(RHmod))
mpmissions\yourmission\resupplyhelicopter\resupplyhelicopter.....sqf
is where the file should be
yeah its (Me)\missions\Test Mission\ResupplyHelicopter(the folder)\resupplyClickonmap.sqf along with the other three SQF files
ok im trying a fresh mission with no other units just to figure this out and minimize variables
AHA
BINGO
Ok it works!
process of elimination
how do i use mouse6, mouse7, etc buttons? they wont bind, it only binds up to mouse5
my mouse software has option to bind keyboard buttons to the mouse buttons, is that the only option?
Yea, lots of games don't support those extra mouse buttons
What can I do best with my arma
Uh can you explain your question a bit more? @rocky ore
@grim tinsel i have a problem. With my arma that he can't find it on my PC and that if I want to solve the problem I have to reinstall it and that doesn't work either
@grim tinsel get this when I get an error on error message
if you encounter an error that you cannot solve by yourself, please report it to feedback tracker, of contact out support team
Signature check timed out
I want to know how to fix the error.
Ask for help
k
I have a TeamSpeak 3 error, Please help!
Since you havent given us any other information we cant @thin smelt
ACRE2 was unable to find TeamSpeak 3 installation.
Seems pretty clear cut
Not really.
It means.... Acre2 was unable to find the Teamspeak 3 installation (location)
Help!
@visual kite
please no post "bumping" across channels. once somebody has an answer, he/she will answer. it can take some time since the majority of users are Europe based, and it's around 6:30 on a sunday morning here
@wise barn I wasn't "post bumping"; it wasn't clear to me (still isn't) which is the correct channel to post that in.
i guess #server_linux would fit, but not sure either
Given that there're these 3 that seem fitting:
#arma3_questions
#arma3_troubleshooting
#server_linux
If there's a more appropriate one, I'd be happy to move the post there and delete the remnants.
@wise barn Ok then, I'll move it to #server_linux and delete the other(s).
👍
anyone know how to spawn in the aircraft carrier while in a public server as zues
iirc you can't spawn either of the large naval ships from Zeus
At least not without mods or access to the debug console (which are not available in public Zeus)
Blame it on the abusers (for the reason you cant have it)
so i downloaded all my saved loadouts before i got a new pc, where do i put the files?
the arma3profiles
@ me
Is alt-tabbing on loading screens a reason for the game to crash for anyone else? Is there a way to fix it? Thanks.
It might interrupt something loading. Especially if you have lot of mods. I think it's known to happen.
You could try borderless window mode or just plain don't tab out. Or use steam overlay to browse Web if needed.
@torn relic same place where you copied them from in the first place
Wow! That's so helpful since I remember that when I copied them 2 months ago! @quaint jewel
Does anyone know why ace3 is now writing a bunch of true/false config options to vars.arma3profile on a dedicated server? Will these overwrite mission file ace3 config?
@torn relic There should be two folders for Arma 3 in your Documents folder. One folder contains the main profile named after your Windows user account, the other contains the rest. Sorry for tagging you if you already figured it out.
Perf depends on graphic settings, map, gamemod, amount of object, players, ia, and a lot of other factors
👍 good optimization
Arma is a lot heavier and larger scope game than your default shooters that have very small terrains compared to arma and fake the distance view beyond the play areas.
Also Arma is older game so it does not necessarily always use the latest tech improvements that are available. your FPS is in the higher end.
@deathfavour#4037
Your fps are well in the upper half. Consider yourself lucky to have that in arma
OK... Well then. I keep talking to myself then...
How's going? - good thanks, and you?
has anyone here gotten the status_access_violation error code recently and do you know how to fix it?
Can't complain other than users leaving before getting an answer
@fringe salmon
It is a veeeery generic windows error msg. When does it happen, how often, and what's the full msg?
5-10 mins when I get into Olympus Altis life servers, I’ll post more info when I’m home.
I also heard something about bluetooth headsets interfering and causing this issue?
I'll stop you right there...
Hmm?
Yes
Upload a Screenshot to imgur or similar and post the link here
👍
Upload a Screenshot to imgur or similar and post the link here
not useful. The game crashed, report it to the feedback tracker like you're told to
I tried with the feedback tracker I can’t figure out how to post on it
need account, login. Star on top right -> new A3 bug report.
Explain what happened, attach the report file that arma launcher gave you
Kk thanks 👍
so my friend seems to be having issues with my personal server as compared to any others. when connecting to my server he gets booted for battle eye not responding, but for other servers he has no issue. any idea what that might be?
@deathfavour#4037 an SSD wouldn't impact fps fyi
SSD does in fact impact on FPS and reduces micro studder
Hi, my Arma decided to act up today popped up with an error
"Cannot initialize directInput (DirectX 8 required)"
What version of windows are you using?
i have an arma 3 question, so my friend has reset his parameters in the launcher, deleted and reinstalled the game, and has got rid of all of his mods, tried starting with out battle eye, deleted battle eye and reinstalled it, but it still gives him "the code execution cannot proceed because it was not found" when he tries to launch the game. any help is really appreciated.
@icy silo, to answer your question from #videos_arma, I get that issue once and awhile. My fix had always been to update the drivers whenever there is one and then manual (re)select the audio devices I want it to record. Even if it says it’s defaulted correctly.
yes, thanks, actually, nvidia told me it had an update waiting, i installed it and bish, it starts working
Yeah, I’ve found I always have to update or it just doesn’t launch.
I think it might be related to my habit of switching between windowed and fullscreen too
but yes, its working for now, thank you
also, when using manual record in shadowplay, don't start it recording, go afk for dinner and come back expecting to have any SSD space free
cos it aint gonna happen
Anyone know how to get rid of Status access Violation!
0x0C000005 STATUS_ACCESS_VIOLATION
Only happens with Mods
Does not matter what mod or how many
yes
what mods are you launching?
I have done Many and I have also done 1 (being Unsung)
try CBA only for a start
Then try CUP Terrains Core 🙂
Its only multiplayer Mission editor seems to work
The crash happens within about 5 minutes in multiplayer
any server?
try vanilla on an official unmodded server
That works ( i only tried for about 20 mins)
But still worked fine
I recently Tranfered windows to one o fmy SSDs and thats when the problem started
could be a number of reasons
but i guess it's a mod/game relocation issue
i'm digging in the dark so.... reinstall arma and the mods...?
Not sure whyt but i also have 3 (program files) Program Files, Program Files (x86), and Program files (x86)Steam
I have reinstalled multiple times same with mods, I have also tried doing it on a different drive
Program Files, Program Files (x86)
iirc one is 32bit apps and the other is 64bit apps
but that's not an issue at all. everyone as those folders
I know that but back before the transfer thats all i ever had iv never seen Program Files (x86)Steam
hmmm... what is the content of the last folder?
Normaly the Steam folder is in my Program files x86
appchache,bin,config,servers,steamapps, ECT...
Normally that path is Program files x86/steam/steamapps/common but for this its Program files x86steam/steamapps/com
i think something went wrong there... looks like this 3rd folder is only steam related. i suggest to uninstall steam via "programs and features", delete that folder from your drive and do a propper reinstall of steam in Program files x86
Everything i have steam related is on there like50 games+ is there a way to save the games
ALL my other games work just fine
Well at least my 150GB game isn't steam hah ok ill delete everything!
Emphasis on the VERY
oh yes...
speshul!
Oh also on windows 10... if that helps at all
but as said, i'm digging in the dark here. that's just a way it could work
win 10... well...
¯_(ツ)_/¯
i have a very special connection to win 10
VERY
arma and win 10 don't like each other very much
Never had issues personally
i had way too many for my taste
not with arma in particular, but a lot of other stuff
but that's not the point here
i have a question about an error i got while starting the game
It keepos trying to make a new Program Files (x86)Steam..... with the installer... and if i tell it to install in my regular Programfiles (x86) its telling me it needs to be empty? so should i make a Empty Steam folder in my x86?
no help if you don't actually ask your question
@normal ether
"the code execution cannot proceed because it was not found" what can i do to fix it
try to create a folder in Program Files (x86) and use that as destination
ok
Got it
ok my bad
What dll does it report, if any @normal ether
i have the launcher open and i press start game it gives me that error
give me a minute ill find out.
0xc000012f
@delicate elm
90% sure
Can you screenshot the window that pops up?
no not really because its on my friends computer and he has just informed me that he deleted the game.
Okay
so the only thing that i can really say is that he has deleted and reinstalled the game, deleted and reinstalled battle eye, reset his parameters in the launcher, has deleted all of his mods, verified his files through steam, and has tried uninstalling it and deleting the arma 3 file itself.
Ok 1/4 done downloading, Hope this works
i hope so too. not just your credibility depends on it 😉
Credibility?
plausibility maybe? not a native speaker 😄
Audio describe the word and i give it to you lol
-> i hope it works to not loose my face...?
Ohhhh got it haha
That's credibility indeed
Your cred not mine
what i actually meant 😄
"not just your credibility depends on it" Implies I had credentials that worked for the topic haha!
true
@normal ether has your friend tried this: https://community.bistudio.com/wiki/Arma_3_Unusual_process_exit#0xC000012F_-_STATUS_INVALID_IMAGE_NOT_MZ
As it's the recommended possible solutions for fixing the 0xC000012F - STATUS_INVALID_IMAGE_NOT_MZ error.
Since your friend has reinstalled multiple times they can no doubt skip the first suggested solution.
no problem 🙂
Is that a Visual C++ Redist issue? That error means that Windows is unable to load a DLL that is required to run the game
Asking wider community...
ok
very likely
what windows is your friend using?
and btw, tell him to join this discord
it'S exhausting to talk via 3 corners
what windows is your friend using?
turns out he uses Linux
not helping...
I stop sh*tposting here kekeke good luck on finding a solution
@normal ether
tell him to check if he got this installed. if not, let him do it
https://www.microsoft.com/en-us/download/details.aspx?id=40784
ok he has made it work but he said that he has to avoid the launcher
not a good option.
i know
let him install the vcredist i posted, also let him make sure he uses the 64bit version or arma
ok
ill get him to join
thanks
i know its painful
