#arma3_troubleshooting

1 messages · Page 74 of 1

crude nacelle
#

NOTHING

#

It's relevant to the game I want to get working, they're the source of entry that might be able to help.

fierce bloom
#

I'm fairly sure it's a DHCP issue or there's something in between your systems that's changing your subnet

crude nacelle
#

I'll write this down

fierce bloom
#

but then again port forwarding would work if it was the router 🤔

quaint jewel
#

You have to have sooome Network adapter that has your 192.168.0.1 set as Gateway. If not. You should not be trying to port Forward on the 192.168.0.1 router

#

IMO it would be best if you just posted your whole ipconfig output

fierce bloom
#

would tracert work?

#

see if there is something between him and his router

quaint jewel
#

yeah.

fierce bloom
#

@crude nacelle run tracert 192.168.0.1 on the server computer and paste the output here

crude nacelle
#

Alrighty

#

C:\Users\theon>tracert 192.168.0.1

Tracing route to INTEL_CE_LINUX [192.168.0.1]
over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms 192.168.1.1

fierce bloom
#

now see, what the hell is 192.168.1.1

crude nacelle
#

2 2 ms 17 ms 1 ms INTEL_CE_LINUX [192.168.0.1]

Trace complete.

fierce bloom
#

type 192.168.1.1 into your browser

crude nacelle
#

ahhh that's my other router

fierce bloom
#

🤦

crude nacelle
#

for extended wireless

#

No no! dude! wait

#

I can plug in my ethernet from the main router here and it won't work.

fierce bloom
#

so you're double NAT

#

are you sure?

crude nacelle
#

mmhmm

fierce bloom
#

humor me and plug it in

crude nacelle
#

Alright

quaint jewel
#

That screenshot you posted. You set it to a specific remote Adress which can never happen. I hope that was just a example screenshot and not the actual settings you have

crude nacelle
#

I've tried a bunch of things

quaint jewel
#

In the screenshot you limited the port-forwarding to only IP addresses from your Wifi extender.
And these Internal addresses never go through NAT

crude nacelle
#

I had no clue what I was doing I just threw those in there earlier today

fierce bloom
#

let me know when you've plugged directly into the router

crude nacelle
#

I thought it would go through those numbers and showhow magically land on anything from 1-101 via 192.168.1.101 lmao

#

alright done

fierce bloom
#

okay now in the command prompt for your server run ipconfig /release and ipconfig /renew

#

then ipconfig again to get the current address

crude nacelle
#

IPv4 Address. . . . . . . . . . . : 192.168.0.11

fierce bloom
#

plug that address into the port forwarding rule as the local IP address and set the remote IP address to Any

crude nacelle
#

!!! DUDE! I see now

#

just to double check

fierce bloom
#

next I'd recommend you research how to set your wireless router into a simple access point mode instead of acting as a full router

#

Yes, that should work

crude nacelle
#

Dude thank you so much, I am double checking it now

#

hmmm

fierce bloom
crude nacelle
fierce bloom
#

try again

crude nacelle
#

why is my IP some kind og number with colons and such

quaint jewel
#

IPv6. You should also have a IPv4 Address. Unless your provider is shit

fierce bloom
#

Verizon doesn't give me IPv6, but the hardware supports it

crude nacelle
#

THEY ARE

fierce bloom
#

:/

crude nacelle
#

I just googled what is my IP and it gave me it without the colons

#

Ahhhh it should say response - success - true? ?? 😄

fierce bloom
#

it should also list server details there, if I'm not mistaken

#

if there's nothing you'll get something like this

    "response": {
        "success": true,
        "servers": [

        ]
        
    }
}```
#

if something's in "servers" then you're set

#

though again if you're playing in the same house you don't really need this

crude nacelle
#

YESS

#

response
success true
servers
0

#

I'm gonna go wake up my friend and see if he can log in

fierce bloom
#

I see it, you're good

#

also I'd delete that message

crude nacelle
#

Thank you so much dude! If you need a clan logo or anything like that hit me up! lol

#

Sweet. Thanks man, I have to go now.

fierce bloom
#

later

#

perseverance, mentlegen

#

:U

fringe salmon
#

hey bros

#

some mods are causing the game to not start anyway i can check which ones?

quaint jewel
#

RPT. Logfile. Probably.

fringe salmon
#

how?

quaint jewel
#

%appdata%\..\Local\Arma 3

fringe salmon
#

?

quaint jewel
lean estuary
#

So this makes no sense... I keep getting an error when trying to start arma with mods enabled. Error updating 'bin\config.bin/CfgVehicles/House_Small_F/DestructionEffects/Smoke1/' by 'a3\structures_f\config.bin/CfgVehicles/House_Small_F/DestructionEffects/Smoke1/', base 'Smoke1'
ErrorMessage: bin\config.bin/CfgVehicles/House_Small_F/DestructionEffects/Smoke1/: Cannot find base class 'Smoke1'

neat mica
#

there is a mod which is missing a dependency?

lean estuary
#

yea i think i figured it out. i have had no sleep and missed something lol

lean estuary
#

@neat mica theres no way? i am so confused right now

lean estuary
#

nvm got it

fringe salmon
#

Can someone help me with ace? I got a empty self interaction menu. I already looked for solutions but none of them seem to work

tough maple
#

Weird problem I've been having. In the past I've been able to self-host things fine for up to 12 people. But since APEX came out people can only join my self-host if I'm on the mission select screen. If I load a mission and then they join, they get autobooted out once they join. But if I keep it on the mission select screen and then load a mission, everyone is fine. Anyone heard of this or something similar?

manic egret
#

How can I get the trader log to work alongside the Respect, currently neither work, if I leave the trader log section out the script itself works however the respect still isn't given. But with the trader log section in nothing works at all. Anyone got any ideas on what may be causing the issue. The link for the script is here: https://pastebin.com/XAjjfH5B Thanks for the help.

weak bramble
manic egret
#

Posted it there got ignored :/

hollow umbra
#

@manic egret if you do not get a reply, post it on the forums.

chilly snow
#

Hey ! how to use the parameter : maxDesync ? what is the value ?

sullen valve
#

hello can you shed some light as to why my signature keeps timing out

river totem
#

ok i know this isnt arma but i need quick help

#

i just got squad today and i installed eac but its telling me to close "xenos injector". can someone pls tell me wtf is it? and how do i get rid of it

steady sphinx
#

can anyone help me im getting very frustrated nomatter what i do this game is always missing something when i try to play and i just bought all dlc so i have everything

untold sequoia
#

what are you missing then?

#

& dont spam channels

steady sphinx
#

i put it in the wrong channel so i posted it here

untold sequoia
#

you can delete your own messages fyi

fringe salmon
#

Maybe u r missing mods which are enabled on the servers u try to join.
I guess if u use server browser from arma launcher then they get downloaded before.. but I never used it....
The other way would be to join servers which use vanilla arms.

#

Vanilla arma

untold sequoia
#

@steady sphinx what error message are you getting?

steady sphinx
#

Im not sure now im reinstalling it

fringe salmon
#

Maybe it helps but I should follow hints and answer questions if I want help really

viral cargo
#

BIS Vehicle respawn module (ModuleRespawnVehicle_F) respawns a vehicle only once and after that doesn't respawn them at all. Question is: why?
EDIT: ooohkay https://feedback.bistudio.com/T123940

kindred jacinth
#

Is there a solution to the staticy ams scope bug? It's really obnoxious.

fallow remnant
#

the what bug?

jaunty badger
#

"static arms scope" ?

fallow remnant
#

no, i think he means something about the AMS scope

#

Advanced Marksman Scope?

#

idk, one of them i guess

kindred jacinth
#

the AMS scope (has a cqc sight and 2 levels of magnified scope) has been giving me issues, when I'm not looking through the magnified scope I'm getting a weird white static through the scope.

scarlet path
#

I'd suggest checking if your GPU driver is up to date, the card isn't overheating etc. weird artifacts usually show up when there is something wrong around the GPU

hollow umbra
#

@scarlet path @kindred jacinth I've seen this happen before only on modifications though. Oddly enough, I did check my drivers and they were up to date. So maybe Roshlev this is a bug? I thought this was fixed a while back.

kindred jacinth
#

I have 0 reasons to suspect gpu issues

#

I've probably added mods until I broke something

hollow umbra
#

Well nothing breaks another until it crosses paths with another mod. Like something that modifies the controls then another mod is seeking control at the same time. I don't suspect gpu problems either, but I have definitely seen this before. @kindred jacinth

kindred jacinth
#

I googled it and it's happened but no one has any explanation it seems

#

or fix

#

Which sucks because it's my favorite scope

hollow umbra
#

@kindred jacinth I'd reset your settings, maybe something got screwed up along the lines. I believe the scopes work off of pip right? 🤔

#

Obviously not the pip in the settings menu, as that pertains to vehicles right?

kindred jacinth
#

@hollow umbra No, If I look down the sights it works, It's when I have the ams on my gun and I'm not looking down the sights I see the weird static and circles

hollow umbra
#

@kindred jacinth Yep I understand, that's when pip works. It's sort of like having a texture that displays recieved camera output.

kindred jacinth
#

Oh, I read that as pip as in dots, not picture in picture. I'll check the settings and see if vehicles do the same thing

hollow umbra
#

@kindred jacinth What waaa...? PiP isn't Picture in Picture?!?

kindred jacinth
#

@hollow umbra You're right, I'm just dumb XD

hollow umbra
#

Lol, I thought I had just gone mad for a couple seconds there.

kindred jacinth
#

I unloaded all mods and now it's back to just normal darkness for the scope

hollow umbra
#

Hmm, welp. Older mod must be fooling with scopes then.

kindred jacinth
#

I'm curious which it is, I only had my favorite ones for DRO installed :c like the RHS mods

hollow umbra
#

Well, maybe it's something you need to bring to the attention of the rhs leads or something. I have absolutely no idea how it might interfear with a vanilla scope but that's just odd.

kindred jacinth
#

I haven't checked if it's rhs

hollow umbra
#

¯_(ツ)_/¯

kindred jacinth
#

I unloaded and reloaded all my mods a few times and it works now

#

wtf

#

I'll take it

#

and I changed my pip setting then put it back'

#

idk which or what did that

hollow umbra
#

Welp. Weird shit to say the least.

kindred jacinth
#

Let's see if it works when I fire up takistan

hollow umbra
#

Cup Terrains Core? Or is it a standalone takistans?

kindred jacinth
#

cup

#

it works

#

Whatever ty for talking me through insanity

hollow umbra
#

yep.

scarlet path
#

okay, didn't consider you using mods. I'd usually try to reproduce the error with default vanilla game to take mods out of the equation. but yeah, AMS is legit. I even use it for RHS DMRs etc

steady sphinx
#

i bought this game 2 days ago and i have never even got into a game i have all dlc and a3launcher says i have all mods and they are up to date but everytime i try to play it give me a different error everytime here are two of them

#

and if i try to load again it will more than likely give me a new error and i have tried uninstalling and reinstalling with no luck

#

and for like half a second before the game starts sometimes it says the game has crached please help

fringe salmon
#

@steady sphinx It may be that your mod files are corrupted. How are you downloading the mods?

wet steppe
#

could anyone please identify what the buggery bollocks is going on with my installation? i just can't stay connected to this server and after 3 days of trying i must admit defeat.

#

can't seem to drag my rpts in

hollow umbra
#

@wet steppe So, why can't you get a rpt? Are you getting kicked? Explain a bit here.

wet steppe
#

i can't drag the rpt in to this channel is what i mean

hollow umbra
#

use pastebin.com

wet steppe
#

nifty

hollow umbra
#

this isn't the full rpt is it?

wet steppe
#

it is

#

all of them cut off at the bottom with ''éxtensions'' being the last one

hollow umbra
#

doesn't make any sense

wet steppe
#

the install validates perfectly, never finds an issue

#

and whether i use a3L or install mods manually, same shit

#

oh and the standard launcher is a bit nicer to me but still, i can only stay connected for half an hour

#

so what would you recommend? i've reinstalled arma when i had this identical problem about 8 months ago on another server (couldn't solve that either). i just don't know what's up

#

thanks for taking a look 😃

ancient epoch
#

it does the same thing to my cousin

#

if any of you find a solution please mention me

wet steppe
#

@ancient epoch I'm still trying

#

it's insane

ancient epoch
#

my cousin got the same ending in their rpt @wet steppe

#

extensions:

#

then nothing

cosmic perch
#

@wet steppe search for "unable to get DLC data" in this discord, maybe its the same issue

wet steppe
#

ok cheers will do

#

@cosmic perch yes i have the same as suicide king. there was no mention if it was the cause of his problem or if it was fixed. the only dlc i don't have is jets. the rest of my dlc is found/installed according to my rpt

cosmic perch
#

you may ask him politely if he got it fixed i guess 😉

ancient epoch
#

@wet steppe are you getting signature check timed out when kicked?

wet steppe
#

no

ancient epoch
#

well he has the same RPT stuff but with signature check timed out

wet steppe
#

i am getting assorted kicks. cba, hvp, one about a certain tree, one for karts, one for languages..jr soundpack...it's just all over the shop. i did a full clean out (i thought) and reinstall and i still have the issue

#

i let a3 launcher install the lot this time

#

last reinstall i did it through the standard launcher

#

i don't know what else i can tell you

#

my buddies have been relaying the errors from server side. i don't see them in the rpt

hollow umbra
#

@wet steppe Are you joining the same server?

#

could have file patching enabled and restricted to key checks

wet steppe
#

for the last three days yes it's been the same server. today i tried a different one, same there too

#

i get the key checks one...i just don't understand why it affects only me if that's it

#

file patching wasn't enabled by the looks of it

#

is there much point in switching to 32? does it cause a lot of mod issues still?

hollow umbra
#

@wet steppe no difference in mod loading from 32 to 64 and vise versa

wet steppe
#

rgr that

#

i'll check on the key check issue next time the admin is around. thanks for the idea

hollow umbra
#

yeah

fringe salmon
#

Ok, this is the first time I have asked for help here regarding a client of mine, but I want to see if anyone else has experienced or heard of this, because it is new to me lol

#

When I log on Arma 3 on my server, it loads up just fine until it gets to the part where it comes to the mission page where you try to pick a class, but I cannot access anything because it begins to flicker. Basically, the whole page of the game goes on and off so I have to back out and am at the very beginning. So, I am unable to access my personal mission that I made via Eden Editor aka "Basic Missions Malden". I don't have the slightest idea why it's doing that. If I go back to the MCC4 Sandbox, it works fine without any problems.

#

They are claiming when they are trying to select a player slot, their entire screen begins to flash. Only when they load up that mission though...

cold escarp
#

bumping this up again cause still broken ive reinstalled so many times too

fringe salmon
#

My 64 bit arma won't start

#

doesn't even give RPT file

#

it just gives a image not mz error

#

reinstalled arma

#

deleted all the arma folders

#

no mods

#

Verify your game on steam?

#

Successfully?

#

Yes

#

Clean arma

#

I found the thing that says to install a certain windows security update for win 7

#

but when I download the update it says the update isn't applicable to my system

#

What is your system?

#

windows 7 ultimate 64 bit

#

All Windows updates installed?

#

yes

#

Gotta go, maybe someone else can help.

#

Good luck

fallow remnant
#

it just gives a image not mz error
could you elaborate on this? i don't fully understand what you mean by this

#

mz?

fringe salmon
#

And it gives no RPT

#

literally ArmA's exe just doesn't run or something

#

The best part is that this only happens with the 64bit exe

#

32 bit's working perfectly fine

#

and before anyone asks, I have a 64 bit system

fallow remnant
#

sure it's not an antivirus blocking it or something? or GPU drivers not identifying it?

wet steppe
#

@hollow umbra key checks are not the problem

warm sinew
#

@fringe salmon tried installing the stuff in _CommonRedist ?

fringe salmon
#

Yes

junior grove
#

after recent update High Command module seems to be breaking custom mods

fallow remnant
#

you'll need to provide details...

sullen valve
#

why does my signature check keep timing out any hot fixes for this problem thanks

fringe salmon
#

@sullen valve mostly a bandwidth/performance/port forrwarding problem. The issue is that the server gets no response of ur client in a proper time.
could be a client or server side problem. if u encounter it with multiple servers then I would guess that the problem is on ur side.

ashen terrace
#

Hey can someone help me? I am trying to play with a guy but without mods so whenever he deletes all his mods he gets this error.

http://i.imgur.com/LJTHp8O.png

scarlet path
#

you...you don't have to delete your mods in order to play without them.

ashen terrace
#

Doesn't work otherwise.

#

We have tried.

scarlet path
#

just use the launcher and opt for "launching without mods"

ashen terrace
#

Trying to launch without mods would give the same error.

fringe salmon
#

maybe u play a mission which needs those mod?

scarlet path
#

CBA is the mainframe for most of the mods though. have you guys tried the "load without mods" option before deleting all of the mods?

ashen terrace
#

We are trying to play Apex Protocol

#

And yes, we did.

#

@scarlet path

scarlet path
#

I am sorry that I have to ask but have you both really loaded the game without mods?

#

also try to verify the game's content and force it to redownload missing content.

ashen terrace
#

Done and Done

#

I can launch fine but it doesn't work for him.

#

I showed you the error didn't I?

fringe salmon
ashen terrace
#

It says Server not responding if tries to host.

scarlet path
#

ye

ashen terrace
#

We were using UPnP

#

Yeah okay.

#

Add me on Steam.

#

Done

fringe salmon
#

Yeah seems so. It's better to forward ports on rooter than to rely to UPnP.

#

but seems not to be the same issue which his friend encountered.

#

yeah

#

As I said. we need the .rpt... but that message was ignored

ashen terrace
#

My ISP has Carrier NAT set up.

#

Might be the issue why I can't host.

fringe salmon
ashen terrace
#

FACK.

#

@Sarogahtyp#5240 Thanks for all the help.

sacred bramble
#

I am trying to create a dynamic generated squad.xml on a rest service. While loading and displaying the xml ingame works fine, I have trouble to get the logo to show.
Long struggle short, wireshark shows that the client stops the data transfer after the first image packet is received.
I have compared a regualr hosted squad xml and my rest hostet packet whise and there is no difference in header or content.
Any clue what I could change?

tepid lily
#

Has anyone found a solution to the Ace 3 Self Interaction menu not working?

sacred bramble
#

@tepid lily have you tried to create a new profile?

scarlet path
#

you are missing those compatibility files most likely

red lodge
#

anyone else had this problem? arma 3 crashes on loading, no mods, error msg: cannot initialize directinput. (directx 8 required)

fading pulsar
#

Did arma previously work without any changes to what you installed or had installed?

#

Run through the installers located in Arma 3\_CommonRedist

#

I used to sometimes crash at start, I'd change the memory allocator to another one to sort it

red lodge
#

only thing i did was reboot

#

did a recheck of files

scarlet path
#

people will need your rpt to analyse the problem I guess

wise barn
#

@red lodge
soundcard issue

#

reinstall / update DX and your soundcard drivers

red lodge
#

there's no way of reinstalling dx apparently in win10 x64 enterprise

#

dxdiag says dx12 is installed

#

reinstalling audio drivers did nothing

#

solved

#

clean install of geforce drivers sorted it

short gull
#

I need help

sinful quartz
#

For some reason addon builder doesn't like animations, when i pack my pbo with binarize checked my animations don't work in game.They will work if i use mikero tools though.

merry elk
#

Anyone having problems with battleeye currently?

fallow remnant
#

elaborate "problems"...

merry elk
#

Battle Eye currently is halting me launching the game. No error. Arma just is stuck at Battle Eye launching

#

If I load Arma without battle eye it's all good.

short gull
#

I run Arma 3 at 5760x1080p and when I want to Change it to 1920x1080 the screen scrunches up

#

I. Hence my 16:3 triple head to a 16;9 and it Still scrunches

karmic canyon
#

I apologize if this looks like spamming but I posted this in the ask questions channel but maybe it would be of more help here

fading pulsar
#

One channel is more than enough

gusty bear
#

Can someone give me a hand? I'm about to throw my computer into my bathtub.

fading pulsar
#

And you

#

One channel is enough, okies?

gusty bear
#

Great, are you familiar with troubleshooting this game?

fading pulsar
#

Nope

#

Only got 45 mins in it

gusty bear
#

Thanks for your instructions, then, but I'm going to keep trying to find someone to help me.

ionic ridge
#

hi im currently in tutorial mode

#

i can figure out how to use my sights,

#

the hints tell me to use left ctrl and sec. mouse button

#

i press my left ctrl and right mouse button but nothing happens. PLEASE HELP!!!

fading pulsar
#

aim down the sights

#

hold left control, then right click

#

should change the sight to another one on the sights unless your scope/attachment doesn't allow it

stray current
#

help

desert isle
#

@Laika#5194 One possible explanation is Apex. If you have even a single Apex item in your inventory, it will be incompatible (unless you play on a server that is also running Apex). The same will apply for other mods.

sacred bramble
#

@BIMINIONS
Could any of you please tell me what arma checks for in a squad xml provided image file that could cause the client to cancel the tcp connection
to the image host after it has successfully send the first part of the image and that has been acknowledged by the client.
(I'm trying to use a rest service for dynamical generated squad.xml and custom images stored in a mysql database)
So far the header and content of the packet by rest and regular hosted image seems to be identical.

karmic canyon
#

@desert isle I have also tried it with vanillia game items and it doesn't work either, for some reason it won't let me load anything that isn't already in the arsenal crates but those crates don't even hold vests and so forth yet I still see others load their items no problem.

short gull
#

If I make a YouTube video about my problem, could I post it here?

desert isle
#

Its better to ask the question outright than force people to sit through a video.

wise barn
#

@short gull
suggestion:
go throught the channels and ask your question in the channel with the best suiting topic

short gull
#

@wise barn My problem is one of those ones people dont really know.

#

Its confusing and hard to explain

wise barn
#

give it a shot

short gull
#

Alright.

#

So I run Arma 3 at 5760x1080p (three screens) and my aspect ratio is 16:3 triple head. Sometimes, I want to play with only one screen. However, when I change my aspect ratio to 16:9 and my screen resolution to 1920x1080, the game scrunches and all the UI buttons are small and not usuable. Ive honestly tried setting it through GeForce experience and disabling my 3 monitors and only allowing 1 but it still plays at a scrunched resolution.

#

@wise barn

wise barn
#

did you restart arma after changeing the settings?

short gull
#

Yes

#

Lol

#

It still is scrunched

hollow umbra
#

@short gull butttons resize when you restart, try again

short gull
#

I did

hollow umbra
#

@short gull change it to some random setting then change it back and try it again

red lodge
#

well screw me my directx 8 bug is here again!

hollow umbra
#

@red lodge directx 8...?

#

I thought Arma was running 11 now 🙄

red lodge
#

yeah me too

#

every second day arma starts saying i don't have dx8

#

i mentioned a couple of pages up

hollow umbra
#

Wow, that's really funky. Maybe a old dx8 library?

red lodge
#

weeks old win install with around 10 other things than arma installed

#

arma is the only thing giving this issue

hollow umbra
#

Agh, feedback tracker ticket then?

red lodge
#

perhaps

winged urchin
#

Wondering if someone can help me out here, have dedi server (40man) reinstalled last night, logged on ok in vanilla ran a mission ok. Then shut the server down added (CUPS, ACE, CBA, RHU's, ACE COMPATS, Taskforce). Added mods to the mod line started server. I login when joining the server but when I use #missions it just stays at the splash screen?

fading pulsar
#

Placing your question in one channel is enough.

winged urchin
#

Sorry, attempting to get a response, cause noone answered me last time.

hollow umbra
#

@winged urchin no one has to answer you, if you do not get an answer post on the forums. Make sure you are logged in as admin, mods dont affect mission rotation

gray night
#

Hello whats goiong on!!

#

Fuck man my arma is all kinds of broke !!!

winged urchin
#

@hollow umbra I get it that noone has to answer, but while googling everything and attempting fixes I didn't want to overload BI Forums and get a nastagram for starting a thread. Just wanna play some Arma 😦

hollow umbra
#

@winged urchin who cares other than yourself what you have to post on the forums? Obviously someone may respond with an answer, but if negative feedback comes about then you can just as easily walk away.

#

So just next time, if you get no response then to the forums i guess.

#

@gray night and what is "broken", you didnt seem to include that in your post

gray night
#

nah brudda I launch and it dont come

hollow umbra
#

@gray night could you articulate please?

wise barn
#

@gray night
dude, what?!?

gray night
#

What ???

#

U cant understand man ??

scarlet path
#

nice trollaccount though

gray night
#

??

hollow umbra
#

God damn it, you cant be serious can you?

gray night
#

rude boi mind u who u chat 2

hollow umbra
#

@gray night people like yourself drive communities like this in the opposite direction.

gray night
#

Racist

#

Wow i cant believe u said that

hollow umbra
#

@gray night did i even mention skin color? Doesnt matter either way. Save your bullshit for someplace else, doesnt belong anywhere really.

fading pulsar
#

😂

#

Reminds me of the gangster wannabes 😂

hollow umbra
#

@fading pulsar Yep, seen too many among casual communities. Idiots beyond comprehension

fierce bloom
#

"Hey my arma's broke please fix" what's wrong? "It's broke :(((("

hollow umbra
#

@fierce bloom essentially

fallow remnant
#

rude boi mind u who u chat 2
made me laugh though 😛

gray epoch
#

Hey guys really new to the game got it last week but I just need to get some help about an issue, Whenever i join a server i get an error and it says "session lost" and my friends have said that it says "Player {My Name] was kicked off signature check timeout and I can only join one server, Ive tried reinstalling, checking files and ive enabled everything in my firewall please help i just wanna enjoy the game

#

Its just happened again

hollow umbra
#

@gray epoch is steam responding? Try closing arma 3, and the steam client. Then relaunching both

gray epoch
#

@hollow umbra Yes It is, I have had this issue for the whole week that ive owned the game

#

Could there be an issue with my hardware my computer isnt the most powerful, but its odd as it lets me join one server and thats it

#

I can also play over hamaci with my friends

#

@hollow umbra I have just read about it and people say they can't find sollutions to this so possibly A bug that BI havent picked up I mean I have heard its been around for ages and I cant see any good resolutions

hollow umbra
#

@gray epoch It's a bug that pertains mainly to steam afaik. The solution can't be found because it's entirely cirumstancial.

#

the hardware has nothing to do with your connectivity issues

gray epoch
#

ok thanks @hollow umbra

shy kelp
#

I am having problems with my Mikero Tools. When I try to obfuscate a mod folder it says it failed because it is missing the paa files in the folder. It says it is either rejected or missing. The mod works fine if it not obfuscated but fails when I try to obfuscate it. How do I obfuscate it properly because Google is not helping.

upper gust
#

@shy kelp Take it to Tool Makers & Mention Mikero. Best way to solve it

shy kelp
#

Ok will try that thanks

upper gust
#

Also make sure not to post it in every channel. If anyone can help they will most likely reply to the post. (Opps miss read channel names.)

shy kelp
#

The only other place is on ask questions here

hollow umbra
#

@shy kelp regardless, post one and done otherwise you have multiple conversations

tawny knot
#

Somebody please tell me why a lot of weapons & shite show up as Jets DLC

#

Even though they're 100% not jets dlc

hollow umbra
#

@tawny knot At this point I think it's a bug.

tawny knot
#

Literally everything that is part of a dlc that I dont own just shows up as Jets

hollow umbra
#

@tawny knot sumbit a feedback ticket. Helps the developers get to the root of the problem

tawny knot
#

How/where. Relatively new to Arma 3.

hollow umbra
tawny knot
#

Thanks

ancient epoch
#

When launching Arma 3 I get "status dll not found"

#

the dependency walker shows me this:

#

arma 3 64 bit

#

32 bit seems to work

steep cosmos
#

how to fix this problem

#

NetServer::finishDestroyPlayer(489508353): DESTROY immediately after CREATE, both cancelled

#

my server freeze

steep cosmos
#

there is anything that make me able to analyze the memory?

shell oasis
#

Hello everyone, I'm having an issue which I can't seem to fix no matter what

#

I keep getting kicked out of every single server.. I don't know why..

#

I've tried a few "Solutions":

  • Verify game integrity
  • Reinstall Game
  • Reinstall Steam and Game
  • Deleting some files related to steam and verify integrity
  • Re-install game again...
#

I just can't enter any server

#

I have 0 mods, even on official servers all I get is a pop up saying "You have been kicked"

#

There is only ONE single server I managed to enter and that's the only server I can play on

#

So... Any suggestions? (Thanks for reading btw )

#

"You were kicked off the game" - That's the actual message

hollow umbra
#

@shell oasis First, they the fuck would you unstall for good just because you can't fix something instantly. Very good example of something like instant gratification. Anyhow, you have been kicked happens differently in many different conditions

#

A) Check the mods that are loaded on the server before joining

#

B) make sure your ping is not over 250 as it may just have dropped

#

C) make sure your client isn't running any extra mods than that are on the server

#

I understand you already mentioned you didn't load mods, you need to double check

fading sequoia
#

Could you post your .rpt file text in pastebin and post link to it?

Another thing is that are you sure if you have battleye enabled?

hollow umbra
#

there you go

shell oasis
#

@hollow umbra I've been going on for this on 2 weeks already and tried everything.

A) I'm joining servers with 0 mods (Even on official arma servers I have this issue)
B) my ping to those servers from 60 ~90
C) I've checked many times but I'll check again

Thanks for taking your time to read and help me! I've spent around 8 hours trying to fix this so not quite instantly... Only now my friends told me there's a discord channel and hence my presence here..

hollow umbra
#

Unistalling arma 3 for good, is a waste of time as you'd just be dumping out those many hours. Plus, you'll add a bit of knowledge to share to others in the future.

shell oasis
#

@St. Jimmy Also thank you for your time and help, I forgot to mention that I've reinstalled battleye manually as well (as was suggested and I do have it running) At least I have the process running on Task Manager

hollow umbra
shell oasis
#

Yeah I guess you're right but I'm just so frustrated already with this.. I'll try to join an official server (no mods) again and post the RPT for you ! Thank you!

shell oasis
#

The server I tried to join was on the "OFFICIAL SERVERS" Tab inside arma3

#

Here's from another server connection attempt:

#

Also an official one, just different mission

#

@hollow umbra @fading sequoia Please let me know if you find anything... Thank you very much for your time and dedication once more!

quaint jewel
#

overflow flag. I've definetly seen that error before with same sympthoms. Don't remember if there was a way to fix it besides reinstalling Windows.

shell oasis
#

Hey Dedmen, thank you for your time too.. Overflow flag is something that's causing the error? Imma google it

uncut trellis
#

that startup path looks weird

#

\Arma3_x64.exe" -noSplash -nosplash -mod=

#

the parameters I mean

#

mine for example looks like this arma3_x64.exe" -window -nosplash -showScriptErrors -mod=@LoDr

#

where does it pick up that other -nosplash

shell oasis
#

I just checked the startup parameters on steam, all I got is "-nosplash" written there

#

That's weird yeah

uncut trellis
#

in the steam parameters?

quaint jewel
#

That's what the log is saying

#

double startparameter doesn't matter.
But still you should remove that from Steam because Arma launcher is already setting that for you

shell oasis
#

Just did!

fading sequoia
#

That guy had the same error

shell oasis
#

That's what I find even weirder... I used to play Arma 3 some time ago everything was fine..

#

Then I had to format my PC and when I re-installed this happened

#

I have the same ISP / Modem for years now

fading sequoia
#

Have you booted your modem?

shell oasis
#

I can try to reboot yeah

#

I haven't tried that

#

I'll brb (gonna lose internet for a moment)

mellow spear
#

some modems/routers handle alot of UDP traffic terribly

shell oasis
#

Okay, I'm back

fading sequoia
#

I remember back in Arma 2 days and I've read it also happening in A3, the internet cuts out after connecting or playing in a server after small time. That bugged me 2 months and suddenly it was gone. Nothing helped it just suddenly fixed itself

shell oasis
#

Going to try and join a server

fading sequoia
shell oasis
#

Dude.. you are a genius

#

It's freaking working

#

I can finally connect

#

I can enter the servers!

#

I'm going to try and enter on a squad

#

Ah crap

#

Nevermind... I got kicked while entering

#

Maybe HDD is the issue..

#

I use Piriform's defraggler to defrag my disks, and the benchmark results are marked as good but I can try and install on my SSD and see how it goes!

#

I guess I'll do that

uncut trellis
#

maybe some sort of firewall problem?

shell oasis
#

Yeah I checked on the windows firewall and Arma3 is cleared

#

I actually checked on that while attempting to troubleshoot two or three days ago

#

I can't enter servers again

#

I guess it was one time luck xD

uncut trellis
#

can you run singleplayer?

shell oasis
#

Yeah with no problems

uncut trellis
#

can you launch your own server

shell oasis
#

And I can go on editor and play aswel

#

Haven't tried yet

#

I'll try

#

Yeah I can host just fine

#

both on LAN or Internet

#

Dunno if people can actually connect to it but it works for me

uncut trellis
#

how about if you try to connect to a server now?

shell oasis
#

got kicked

#

I didn't close the game or anything just stopped hosting and tried to join a server

uncut trellis
#

and it say nothing else

#

just kicked

shell oasis
#

Same message

uncut trellis
#

do you happen to have any other programs running

shell oasis
#

"You were kicked off the game"

uncut trellis
#

anything with overlays and such

#

that battleeye could kick you out for

shell oasis
#

Not really, all I have open now is Steam and google chrome (with discord)

#

and a notepad

#

nothing strange in my processes either

frigid gorge
#

you dont have any mods in your parameters?

uncut trellis
#

20:47:27 Skipping mods and signatures due to overflow flag being set. these messages in your .rpt are the only thing I dont have

shell oasis
#

In arma 3 launcher thingy that opens when you start the game from steam (before starting the game itself)
On the "Mods" tab I have everything disabled

frigid gorge
#

how about on the settings tab?

#

or what ever its called

shell oasis
#

Parameters tab?

#

I have nothing there either.. It's all on default except for the "Skip intros"

#

"Skip logos on startup"

frigid gorge
#

bugger lol

shell oasis
#

Yeah.. Maybe it's the HDD itself..

quaint jewel
#

@uncut trellis What I already said. That overflow flag is the actual problem

shell oasis
#

I can try and re install on my SSD and see how it goes

#

HDD Is a bit old, wouldn't be surprised if it's the thing causing this

#

Well guys I want to thank you all for your time and help.. You're all very kind people to be wasting your time on something that's not even your problem and for someone you don't even know :)

I have to work tomorrow early so I have to go to bed, It's getting quite late :/
I'll be here again tomorrow, so if you're here we can try and troubleshoot this

#

Thank you once more for all the help! It gives me hope to get this working again! 😃

#

See you guys tomorrow!!

desert isle
quaint jewel
#

Yeah that's the other case I was talking about before.
@shell oasis Try moving My Documents\Arma 3 folder to your Desktop. Or create a Backup and delete it. A file in that folder could cause the Problem. And that is not checked by Steam's integrity check and also doesn't get removed when you reinstall the game

reef plinth
#

Is anyone here familiar with MCC? I'm trying to use it on my server, I have it running there and client side, I can see that its running, but can not use it on any of my mission files. The zeus modules work, but I cannot access the tablet to draw zones, set up supports, or anything. Anyone know any reasons why? I cant change the keybinds to open the tablet, because the option to change them disapears the second I try to access it when I press escape.

mossy spindle
#

We have a minimal UI server set up. However, there seems to be an issue where occasionally the squad UI shows up for one individual in our operations - ignoring our server side forced settings. Last night it happened to one of the individuals recording. It shows up when he presses the J key.

https://www.youtube.com/watch?v=Ra2B723cnYw&t=1826

is there a way to stop this behaviour, or a work around we could introduce? We have some in house configs, so we're not avert to making a mod to block the behaviour.

Thanks.

thin flare
#

.

#

hi

#

my arma3 profile wa reset

#

i want get it back

#

nobody not here?

rough axle
#

I'm getting some weird behaviour with menus. When I open the gear, team-switch, or ACE interaction menus, when I move the mouse, my view moves around as if I didn't have those menus open. I've tried changing all the ACE interaction options around to see if that's what was causing it, but it's not made a difference

scarlet path
#

you can activate the mouse control so that you can move the cursor around to hover over options or you can deactivate the cursor and aim for the options with your whole view.+

#

oh, just read that the behaviour isn't exclusively ACE menu

rough axle
#

Yeah, that's what gets me. It did happen after I changed a load of binds and quite a few addon options

#

Doesn't appear to be linked to ACE, just "reset all" its options, still the same

#

Alright, I fixed it - Think it was because I had "Aim" up/down/left/right unbound

zenith anvil
#

So, A friend is having an issue with connection to a server, Its running a modified version of Exile. Yeah its not me dont worry. Issue occured right after a crash never been able to join properly since that moment. Regular solutions such as Admin, Reinstall, Steam check, Mod Redownload, Log check have all given nothing. Does anyone know of something very odd that could be causing it?

#

Tested with firewall disabled only abnormalty noticed so far is a constant stream of outoging packetloss from the client. The issue seems to be a variety of just crying about strange different mod requests. Very lost here..

chilly crown
#

Just lost all sort of input in Arma

#

was in steam browser when the game suddenly froze and exited the browser. I can't move, can't look. I can't do anything but everything around me is moving

#

Players are moving, birds, grass.

hollow umbra
#

@chilly crown steam issue, overlay bugs out and arma still believes the overlay to be still open. Only occurs when opening the browser ingame

chilly crown
#

Exactly what I was doing :/ Lost my sniper position on the server. 😦

hollow umbra
#

@chilly crown its a steam overlay problem, not an arma 3 problem. Go ahead and find some way to contact valve support and see what they have to say

chilly crown
#

Valve support? That's a dream now.

hollow umbra
#

@chilly crown Try at least, no point in leaving it a problem unreported

chilly crown
#

Will do

reef plinth
#

Anyone know why certain non apex related missions give an error "player trying to connect is missing DLC content" or "missing APEX"? I host missions on my private server, and I run missions on all cups maps, DLC and vanilla maps. The problem is, maps not related to APEX at all, like Takistan, Zargabad, Chernarus, and even Lythium will not let players connect to my server. I will see them attempt to connect, and then a battleye message says player was kicked due to missing content.

#

And when I say players can't connect, I'm speaking specifically in regards to players who don't have apex

fallow remnant
#

there's a new...feature...

#

go to the scenario settings

#

in multiplayer, i think, there's a thing that says "require DLC" - uncheck that and see

reef plinth
#

So, is scenario settings something you see in the lobby where you're connecting or is that something in the eden editor when you're making the mission file?

hollow umbra
#

@fallow remnant yep

#

@reef plinth Scenario attributes, should be under general

reef plinth
#

General what? Where? In eden or lobby?

hollow umbra
#

Oh and also make sure you arent placing apex items, buildings, etc

#

@reef plintheden

reef plinth
#

We do not place apex assets. The maps should not include any since they're ports of ArmA 2 maps, and our mission maker doesn't use any

fallow remnant
#

Placing Apex assets should not cause people to get kicked anymore

hollow umbra
#

Why isnt your mission maker asking or figuring it out?

#

@fallow remnant ah yes,

#

Very recent change might i add suicide king

reef plinth
#

I'm the server founder and he's convinced it's not on his end but instead a server setting. I don't know any better, I don't make mission files so I can't dispute that his side is broken.

#

@hollow umbra

hollow umbra
#

@reef plinth Nothing you do on your end, even trying to load the apex expansion as a mod won't even do anything

reef plinth
#

My mission maker says he has been in checking the "require DLC" box. Any other suggestions?

fading pulsar
#

I'd like to find a solution for that too, had it happen to a friend even though he owned Apex and other DLC

reef plinth
#

YES! @fading pulsar , I've had players who have ALL DLC'S get booted with the same message!

fallow remnant
#

Very recent change might i add suicide king
It's been discussed here for almost a month now

hollow umbra
#

don't post in multiple channels please @Cpl.Kerry#4505 it's very annoying

#

@fallow remnant Feels like it's been shorter I guess then

daring abyss
#

Ayone here i could use a hand getting a custom profile setup

quaint jewel
#

@daring abyss What profile?

daring abyss
#

A custom diffuculty profile for a dedicated server

quaint jewel
#

Something on you is broken. You post in two channels that are unrelated to the problem and you PM me instead of answering me where I asked the question.
And in PM you talk about something completly different to what you talk about here.

#

You want a custom difficulty. Go to your servers profile directory. Find the arma3Profile file and edit it.

burnt matrix
#

Hi all, I have been having an issue with Arma 3 lately. It has been very laggy and the mouse response time is off a lot. I believe the issue lies with battle eye

#

here is a log of it, it is blocking that specific file

#

Anyone know a fix?

upper gust
#

What is the program it is blocking?

forest tide
#

Turn vsync off

fading sequoia
#

So it doesn't happenif you disable battleye?

#

@burnt matrix also have you tried if it happens with 32-bit?

gray night
#

i need some help with asr ai arma 3

#

Please

forest tide
gray night
#

someone else asked

#

was ignored

#

this is fastes

#

i need to disable ASR ai on certain groups

fringe salmon
#

did u looked into its config file inside of armas userconfig folder?

gray night
#

its not user side

#

its for a mission on a server

#

with asr ai on it

fringe salmon
#

Jedi maybe you need to disable vsync

#

or the cpu is in agressive powersaving

#

or has a competing program

fringe salmon
#

@gray night what I told is serverside if I do that on server

#

Just read the mods installation description...

#

I run a server with it as well...

burnt matrix
#

@fading sequoia I managed to fix it by uninstalling the program that held the dll, It was a very strange issue, thank you though

gray night
#

it has no description

#

that i can find @fringe salmon

fringe salmon
#

For best experience, install the mod on server and all clients connecting to it, headless or not. The server settings (from userconfig) are always used.

hollow umbra
#

@gray night Yes it does, keep using that oh so large brain of yours to figure it out.

fringe salmon
#

first hit with google while using
asr ai
for search

fading pulsar
#

@hollow umbra Lol best of luck with him, previous attitudes been no better

hollow umbra
#

@fading pulsar Yep. I wouldn't even bother with this fool @fringe salmon

gray night
#

doesnt show you how to disable ASR on AI...

#

im asking for the simple line

#

u can put inside the units init

#

that disables ASR ai completely on that specific guy or group

#

mission side

#

i think u read me wrong @fringe salmon

#

jesus fuck asking a question round here

#

just get called a retard

fading pulsar
#

Depends on your attitude, some people will ignore you, some will help to an extent

fringe salmon
#

@gray night u said userconfig is client side and this is not true. I just showed u that it is not client side and told u to look at it's config file for something like that. I never said that this is the solution for ur request. but u have so much issues beside that especially with ur behavior ... first one on my ignore list now.

gray night
#

yes this is why i was confused

#

i was wondering why you were asking me about the userconfig

#

sorry im a bit high

hollow umbra
#

@fading pulsar My conclusion: Don't help and let the fool suffer. No need in wasting someone's time on idiotic rambling. "Help me, it's broke" "I don't know what to do, I'm done."

jaunty badger
#

I don't think there is a "simple line" that "[you] can put inside the units init".

gray night
#

there is

#

iveu sed it before

#

i just cant remember what it called

desert isle
#

Hmm, I think the rhetoric needs to be taken down a notch or two by a few of you. ⚠️

fringe salmon
#

help

#

sometimes Arma 3 sync freezes

fringe salmon
#

HEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP

quaint jewel
#

Ah. Ok.

fringe salmon
#

help?

quaint jewel
#

No.

fringe salmon
#

wtf

quaint jewel
#

You are not giving even close enough information. You would be far better of asking the A3Sync dev about it.
You just come here and say "Fix my problems with magic! Go do it!" No one can do that

fringe salmon
#

Arma 3 sync freezes

#

A LOT

#

i have to restart download

#

I am not complete sure that what was downloaded was actually saved

#

But I think it does. Problem is I have to download 26 GB. So if it freezes constantly

#

I need to manually restart the download

quaint jewel
#

Just download via FTP manually if it's a FTP based server

#

Tell your server owner

fringe salmon
#

whats FTP

hollow umbra
#

@fringe salmon File Transfer Protocol, that's what Arma 3 Sync uses to download files from your server owners FTP Server

fringe salmon
#

.I identified when it freezes

#

Its not randomly

#

There are 2 bars. When the bar below fills up, its when the download seems to stop. It may not actually stop on the background

#

cant post pics here..

quaint jewel
#

Arma 3 Life?

#

If yes you should ask at your servers Forum. It's probably their fault

fringe salmon
#

life or ALIVE?

quaint jewel
#

life

#

Or else I would have written ALiVE

fickle junco
#

Someone know how to fix Addon Builder bug, when chrome or transparent materials became black after binarazing? A few weeks ago all was ok, but now even old models rebinarizing give broken result.
And also for a long time there is a bug, when some glass fire geometry materials after binarizing became a stone.

quaint jewel
hollow umbra
#

Addon builder was never really good at binarizing textures to begin with afaik

quaint jewel
#

binarizing textures? Textures are not binarized.

hollow umbra
#

Woops, I meant along the lines of packing them.

quaint jewel
#

packing textures in pbo also doesn't change anything 😄

hollow umbra
#

I swear to you, it's changed fucking colors before on me man 😦

quaint jewel
#

Materials (rvmat) are binarized tho

hollow umbra
#

Yep.

#

I had a skull turn pink once when I packed it into a pbo, likely unrelated but still. A pink skull!

#

(Insignia)

quaint jewel
#

If you let AddonBuilder convert your textures from tga or whatever to paa that could happen

hollow umbra
#

Is that so because it's a different color profile?

quaint jewel
#

probably

shadow topaz
#

@BlackManNoGirlfriend#7427 unit setVariable ["asr_ai_exclude",true];

lone prairie
#

Hey all, does anyone know if it's possible to give pawnee's missile warnings once again, without the use of a mod?

wise barn
#

this helicopter has no missile warning system

neat mica
#

without a mod, no, now someone might create a new RWR pod that can be mounted in place of another weapon on the Pawnee ...

shadow topaz
#

Whether it had it before or not you could use eventhandler "IncomingMissile" to detect them and do some creative reaction like play a custom sound or one from game for example.. No mods, just scripting.

faint parrot
#

When I click join server on gametracker, nothing at all happens. What do i need to do to fix it?

prime geyser
#

Question

#

is helo glass supposed to be opaque to the FLIR mode on ENVG-IIs?

#

tried using them as a helo pilot and the FLIR mode does me no good

#

the helicopter's glass blocks everything

slow abyss
#

@prime geyser Thermal cameras can't see through glass, so it's intentional.

prime geyser
#

Ah

#

thanks!

slow abyss
#

You can move your head out of the cockpit on some helos though. 😉

lone raven
#

Hey guys, running into a problem

#

I was installing buldozer on another PC but in buldozer in cannot move with my mouse

fringe salmon
#

caused by a popup error?

lone raven
#

no

blissful bramble
#

Nothing happens if you hit F2 to change camera movement modes?

fringe salmon
#

i think buldozer keybinds were wrong, should be fixed now

fringe salmon
#

It looks normal at first, after 5-10 in-game minutes it changes to the above.

lone raven
#

@blissful bramble yeah, for some reason the key bindings were set ingame, but I reselected them with the preset, and that worked

fringe salmon
#

@fringe salmon i was actually messing with Game cross hair and UI colors and that issue occured

#

i restarted arma and it was fixed

fringe salmon
#

Restarting the game fixes it. But what causes it in the first place?

fringe salmon
#

Is there a way to deinstall buldozer and reinstall it?

forest tide
#

@brisk raft double press ALT or go to OPTIONS > GAME > GENERAL ---- CHANGE VEHICLE FREELOOK to DISABLED

brisk raft
#

@forest tide no its not that Im afraid

#

It was already disabled. this must be something wrong in the config, model.cfg or the model itself..

brisk raft
#

didnt work. damn this is frustrating. it works fine on other tanks 😔

fringe salmon
#

if your body is stuck in freelook you must double tap alt (someone tipepd it ingame just now)

#

it happens with spawns sometimes

#

I also had my voice chat hang twice

#

push to talk hung, causing a warning

hollow umbra
#

Were you in a vehicle at the time? @fringe salmon Vehicle freelook is another game option to disable or enable

fringe salmon
#

OK

hasty dove
#

How do I set up my 2nd pc as a server for me and my friends to play on in OPF?

hollow umbra
#

@hasty dove OFP? Steam has a secondary launch option for a dedicated server, make sure the ports required are forwarded

hasty dove
#

Explain to me like i'm 5 @hollow umbra

fading pulsar
#

Go away for 10 minutes and grow up to be 15 😂

hollow umbra
#

@hasty dove when starting operation flashpoint, you will get two different launch options (afaik, if its not Major Mittens will correct me) and you should have the dedicated server ui

#

@fading pulsar excuse me, im like 3 years old. That offends me

#

Otherwise once you start up ofp you should have a radio menu to switch between the client and the ded server

fading pulsar
#

😂

hasty dove
#

15:13:45 Dedicated server created
15:13:46 Server identity created

#

Thats all it says once I do the dedicated server launch

#

@hollow umbra

hollow umbra
#

@hasty dove yep. Seems like a normal launch. Do you have the port range 2300-2309 ported?

#

*forwarded

#

Otherwise, log in and it should appear under a LAN filter

hasty dove
#

Port 2302

#

How can my friend in a different state connect tho?

hollow umbra
#

@hasty dove they can directly connect to you via steam afaik as well as direct connect via your public ip adress. Not your ipv4

fading pulsar
#

well, more often than not the public IP constists of being ipv4, no? @hollow umbra

hollow umbra
#

@fading pulsar nope. Ipv4's all have a certain pattern. It may consist of the same numbers. Ex of my local ipv4: 192.168.1.218 where as my detault gateway 192.168.1.1 determines it

fading pulsar
#

Not sure if I've been mislead all my life or if something's being lost in the deep internet 🤔

quaint jewel
#

Public IP is mostly IPv4.. Unless you have a dirt cheap provider that only gives you IPv6

#

And you @hasty dove need to forward the port in your router probably

hollow umbra
#

But your ipv4 isnt your public ip is what im saying

hasty dove
#

ech

quaint jewel
#

It is... @hollow umbra

hasty dove
#

I have no idea what everyone is saying

fading pulsar
#

I only know of ipv4 and ipv6, my Pub IP is ipv4 as my ISP is too cheap to do ipv6 and not willing to give us the ability to connect to ipv6

quaint jewel
#

IPv4 Adresses are actually more expensive than IPv6. Because they are running out

fading pulsar
#

They are but sadly my ISP isn't doing ipv6 until demand is higher

hollow umbra
#

@quaint jewel yes i understand what you're talkng about. But whenever you're talking about your address on the local network it is not the same as the adress you would use on a remote machine

quaint jewel
#

Yes. But that has nothing to do with IPv4

fading pulsar
#

Simply saying give him your public IP would've sufficed or give public IP not local

quaint jewel
#

Why would you even start talking about your local IP when all we need is the public one

hollow umbra
#

Because there is often confusion as to which is public. Or at least when i talo to people about such

quaint jewel
fading pulsar
#

goes to google, whats my ip

quaint jewel
#

Tell your friend to connect to that

hasty dove
#

ok

quaint jewel
#

if it doesn't work you probably need to forward your port in your router. Which is router specific

fading pulsar
#

When I'm too lazy to remember my ip or have gotten a new one I just google "my ip" and copy-paste that

hasty dove
#

But I cant run OPF and the server on one pc?

fading pulsar
#

You can

quaint jewel
#

I just use any of my 3 domains that always point to my home :u

hollow umbra
#

Yeah, hell. Even on the same machine if you really want to

fading pulsar
#

I wish my ISP gave me my static IP back 😢

hollow umbra
#

@quaint jewel sounds dangerous if the domain gets a flood of traffic

quaint jewel
#

It doesn't.

fading pulsar
#

I got a domain with pointing it at my IP in mind, did that then less than a month later it turns dynamic

quaint jewel
#

No one knows the adress

fading pulsar
#

^ no one will really unless it's given out

quaint jewel
#

cough

fading pulsar
#

AAAAChoooo

#

sniffle

quaint jewel
#

I can always change it if I want to.

hollow umbra
#

Ahhhhhh!

fading pulsar
#

I got my cool af domain pointing at my site, subdomain for TS, another subdomain for my Arma server

#

then another 2-3 for misc rubbish

quaint jewel
#

same. Only a couple more as I also have a few more servers ^^

fading pulsar
#

I wish I looked into getting one a year ago instead of using a free hostname tbh

hollow umbra
#

Is there anything useful in having the actual domain controller instead of renting?

fading pulsar
#

I'm not sure what you mean

hollow umbra
#

Or more useful shal i say

#

Windows Server 2012 for example > Domain controller yes?

quaint jewel
#

Not related to the Domains we are talking about

fading pulsar
#

I think I ought to point out the #offtopic before FM does 👀

quaint jewel
#

Better do that in #arma3_scripting
No one wrote anything in here for half an hour. But I agree.. The ghosts that nobody can hear or see should go to #offtopic

stable thistle
#

@fringe salmon ?

fading pulsar
#

Double click on the top issh part, see if you can get it to maximise then drag it smaller

stable thistle
#

Good idea. Thanks. I'll try it.

stable thistle
#

Bummer the option to maximize/maximize is greyed out. The thing is, I can actually move the load dependencies tab down but I can move it up which is the only direction I can move it in that would help me. This is crazy! Why can't I resize this screen?

#

*can't move it up is what I meant to say

#

Ugh. I just moved the taskbar around and still, this load dependencies window absolutely refuses to give me an option to resize it. This is insane.

cinder pewter
#

i reported it to steelseries too

shadow topaz
#

@cinder pewter Is it USB?

quaint jewel
#

Thought the same. But if it's the known USB Headset problem there wouldn't be an issue when switching between two modes as both go over the same USB

cinder pewter
#

@shadow topaz yup

shadow topaz
#

Then more likely an unknown USB audio problem. USB audio in general in notorious for many problems in the proffesional audio business . I'll always go analog or any other interface for digital audio..

cinder pewter
#

normally i use my scarlett audio interface, but i bought this one because my trackir vector pro can run off batteries. i.e i'd be entirely wireless

shadow topaz
#

Out of the box/external is better but still USB

#

Ever lost sync with the scarlett?

cinder pewter
#

lost sync? not sure what that means, but i have burned out a SEx1 microphone

#

i.e you don't want to leave phoantom power on

shadow topaz
#

More reason not to use USB for Audio. let me guess. You were powereing the unit with USB instead of stand alone power then tried to Phantom Power a mic/ Pluged it in while phantom power eanabled/ it surged and blew the mic. On any other type of quality non USB device leaving the Phantom power on is not a problem. It might make a loud pop but should be ok. Deffinately never plug a ribbon mic into active Phantom power reguadless of device type or say good by to nice mic.

cinder pewter
#

i'm not sure what blew the mic, but the interface is entirely powered through usb which is probably good since it won't have any phase issues then

#

and i wouldn't say usb is a bad audio interface. personally i've had more issues with pure analog interfaces then anything else. you have to twist all cables, put ferrite cores around them, and make sure your graphics card is inside a faradays cage unless you want spurious noise on your audio output

shadow topaz
#

Phase is an issue having nothing to do with USB. Do you mean ground hum?

cinder pewter
#

because usb doesn't have phase issues 😃

#

imo i welcome the usb soundcard market. i've spoken to so many people on ts/discord that don't know how to properly ground things. i don't think that's an issue with usb

shadow topaz
#

I can make multi mic recordings on a UBS external DAC/ADC and still be out of phase when mixing the signals having bleed and mics were different distances to source.

cinder pewter
#

i don't doubt it. i don't have any experience myself with multimic except playing around with it. never did anything serious

shadow topaz
#

Out of phase causes frequency cancellation. Can be done on any device. Most quality audio devices have ground lift/reverse to combat hum but you still need to have all devices powered from same source and if everything is sheilded then no noise.

cinder pewter
#

ground hum in my experience in 99% of the cases come from someone plugging their analog headset into their front panels or something on their computer case

#

with the cable routing and bad grounding, it's not a surprise

shadow topaz
#

So much noise is generated in the box so allways better out of the box and most are sheilded enclosures. cards and boards are not.

cinder pewter
#

true

fringe salmon
#

Hey guys

#

I bought a GTX 1060 of 6GB and I have no idea how much video memory limit to set for launch parameters

#

Any help?

hollow umbra
#

@fringe salmon its automatically detected. No need to adjust them manually

fringe salmon
#

Hey guys
I hear a slight buzzing from my computer
Right now, I'm staying in Idle and doing nothing in PC, my graphic card fans are totally OFF
but I still hear that buzzing
Can it be from the PSU and not from the GPU?

quaint jewel
#

CPU fan? Hard drive? Inductors from PSU or GPU

#

Case fan?

fringe salmon
#

no idea its just so confusing

#

but the noise comes from my GPU area

#

i shutted down fans from GPU and I'm not putting it under work right now

#

still have the same noise

#

my PSU is near GPU

#

so i figure out its the PSU?

quaint jewel
#

Could also be your CPU's power supply thingy on the MB

#

Try taking your PSU out and see if the sound is still there

fringe salmon
#

Wait

#

I wanna see if its my GPU

#

that's all i care

#

if the fans are on 0% and i'm not playing anything / not doing anything

#

and there is still sound of buzzing

#

it's not my GPU right?

quaint jewel
#

How would I know?

#

Take your GPU out and see if the sound is still there

sage dirge
#

a buzzing from your computer?

#

I think you somehow got a bee in your computer

quaint jewel
#

or a bug

fading pulsar
#

Coil whine

quaint jewel
#

Which I already said Inductors from PSU or GPU

snow furnace
#

Is there a true fix for this thing?

jaunty badger
#

You can copy these win10 error messages by clicking the window and pressing ctrl+c . No need to screencap them.

snow furnace
#

it was for quickness for me and my friend

#

he has them as well

quaint jewel
#

@snow furnace You have a crash right there.. Some crash.. Probably one of the thousands of unknown ones. I'm sure there is a very easy fix for that.

jaunty badger
#

You could've googled it, but that's difficult with just a screenshot.

quaint jewel
#

Google won't help you there

neat mica
#

and not because it's a screenshot, but because the memory addresses will be unique to his system

#

it's just a generic crash, there's nothing actionable or even useful in that message without an associated dump or stack trace

snow furnace
#

The crash seems to be the exact same as the one my friends getting

#

ive reinstalled arma 3 anyway

#

hoping it fixes it but i know it wont

snow furnace
#

So it seems when somebody selects this certain starting solider, the game crashes..

#

how odd lol

fierce bloom
#

Are you using mods?

#

@snow furnace

snow furnace
#

Many

#

However I've read accounts of this happening regardless

#

We kind of narrowed it down to something weird though as I said in my previous post

#

I've no idea why but when we used the soldier 'Spiers' who I have in my game, it crashed lol

fierce bloom
#

Yeah seems to me like an issue with the mission or a modded item on the soldier associated with that slot

#

Probably a mod issue then

snow furnace
#

Yeah

#

It seems ok now

#

got to love when things go wrong, right?

fierce bloom
#

Yep 😄

snow furnace
#

I also just realised i cant release my mod at its true potential 😦

#

copywritten music etc

fierce bloom
#

Copyrighted*

wise barn
#

@snow furnace
what music do you use?

snow furnace
#

@fierce bloom You really messaged 2 hours later just to correct me? jesus dude.

fierce bloom
#

:3

snow furnace
#

@wise barn oh and just a few things from Band of Brothers and Medal of Honour

fierce bloom
#

It's more I saw the new message notice and responded without reading the time

wise barn
#

what musical style? more like epic score music?

#

i might know a source you could use

snow furnace
wise barn
#

PM inbound

whole ocean
#

Hello, i have uploaded a mod to steam and i want to remove some pbo files from the addon folder, however when i update the mod using the publisher with the updated folder it keeps the pbo files i want to remove. is there something i am doing wrong?

hollow umbra
#

@whole ocean select the correct mod folder and make sure they are gone. Remove and add the folder back again in the publisher

whole ocean
#

So i need to delete my mod off steam and re-upload?

#

The current mod folder on steam has 57 pbo filethat i want removed so i removed them from the folder on my desktop, so i select that folder from my desltop to upload to steam and when it is done uploading i subscribe to the mod on steam and it downloads the mod but when i go in and check the modfolder it has still got the 57 pbo files i want rid off.

shadow raft
#

Which workshop item is this for if you dont mind me asking?

shadow raft
#

🤦

neat mica
#

@whole ocean Mod packs of other people's work usually get taken down because they violate copyright, the correct approach is to mark those mods in the workshop as dependencies of yours and then steam will prompt the user to install them. Though really, the consensus is that Steam Workshop isn't the place to host server packs, it's for original content

ebon turtle
#

tl;dr no stealing & reuploading

whole ocean
#

yeh already been down that path and that's why RHS is dependancie am not here to talk about DCMA issues just the uploading issue, am not stealing anyway i don't claim credit for any of the mods and all mods are linked into the proper pages and license are all been checked. like i said RHS was the only authors who had problems.

ebon turtle
#

have you asked every single author personally if you can pack their mods

#

xd

#

just common decency

whole ocean
#

no but i have read there license file that does not restrict it they say you can't claim ownership (wich i do not)

shadow raft
#

Jsrs?

whole ocean
#

Yes

ebon turtle
#

lol

shadow raft
#

Fyi, uploading to steam workshop claims ownership.

neat mica
#

@ebon turtle to be fair, that particular statement is contradictory, you can't say "no redistribution" and release it under a CC license that explicitly allows redistribution

#

it's not valid to release it under any CC license in fact, since those all exist explicitly for content that can be freely shared

shadow raft
#

Thats why he deleted his other statements.

whole ocean
#

I just tend to ignore these people Gbee

shadow raft
#

Probably got lazy and didnt delete the link.

whole ocean
#

There only out to be assholes so no point in arguing with them

neat mica
#

I was referring to Lord Jarhead's 'license' which CM posted a screenshot of. The license terms themselves are completely at odds with each other.

shadow raft
#

Workshop crawler has been scanning for nearly 20 minutes. Lots of files there. Was waiting to see what was in it.

whole ocean
#

lol

blissful bramble
#

@sonic stump does the your EULA for Lythium allow other people to upload it to the workshop? (That Should get a definitive answer for you folks now) 😉

desert isle
#

@whole ocean You are PROHIBITED from uploading mods that were not created by yourself. This is quite clear in Steam's EULA

mellow spear
#

Build a mod collection if you are just using stuff that others have made

fading sequoia
#

The server browser can load all the dependencies so I really don't understand why to pack mods as one for "ease of use". It is wasted hard drive space when you could have the same mod multiple times

#

It even can detect some non-workshop ones if i remember right?

desert isle
#

@whole ocean Section 6D of the EULA

#

D. Representations and Warranties

You represent and warrant to us that you have sufficient rights in all User Generated Content to grant Valve and other affected parties the licenses described under A. and B. above or in any license terms specific to the applicable Workshop-Enabled App or Workshop page. This includes, without limitation, any kind of intellectual property rights or other proprietary or personal rights affected by or included in the User Generated Content. In particular, with respect to Workshop Contributions, you represent and warrant that the Workshop Contribution was originally created by you (or, with respect to a Workshop Contribution to which others contributed besides you, by you and the other contributors, and in such case that you have the right to submit such Workshop Contribution on behalf of those other contributors).

You furthermore represent and warrant that the User Generated Content, your submission of that Content, and your granting of rights in that Content does not violate any applicable contract, law or regulation.

#

@fading pulsar Is that your server?

edgy glade
#

To be fair, I could link tons of steam workshop mods that are repacks of other peoples mods, not sure there's an issue as long as the creators are credited, which is exactly what the dependencies function does anyway?

shadow raft
#

Not how it works

desert isle
#

There ABSOLUTELY is an issue. It's legally considered theft. The above user will be banned from this Discord accordingly.

whole ocean
#

Haha yeh nice one bellend go ban all from steam as well u loner nothing better to do with your time than policing a shity unhelpful discord channel 😭😭😭😭😭😭😭😭

shadow raft
#

Anyone hear that?

desert isle
#

It was the sound of a hammer.

shadow raft
#

Lol

ebon turtle
#

if only he put the time in to make his own mods :/

#

anyway moving on

neat mica
#

I think banning him from discord was a touch harsh, ban him from steam workshop - sure, but it's not as though his behaviour here was really out of line, it just seemed to me that he was ignorant of the rules regarding the workshop and mod redistribution

ebon turtle
#

ignorance to rules is not a defence.... v.v

neat mica
#

unless some of his messages were deleted and I missed it

desert isle
#

No, he was informed of the rules and chose not to abide by them as evidenced by the previous DMCA by RHS.

#

He violated not only the Steam EULA, but Bohemias own rules regarding creators rights. Therefore, he has been banned.

#

You break the rules, you're gone. It's quite simple. He can't steal from others and expect to remain a part of the community.

edgy glade
#

But as soon as he was contacted by the RHS guys he responded the same day and added it as a dependency? Also the other dependency was licensed under CC?

desert isle
#

No, read the Steam EULA.

#

Also, read the Bohemia Guidelines and Rules regarding other people's content. You also forgot to mention the other items that were repacked in that mod ( it has already been scanned)

edgy glade
desert isle
#

He can now expect multiple DCMAs and reports on that content.

#

Section 6D

shadow raft
#

The snapshot from the crawler posted in #ip_rights_violations shows 1 page of 756 pages of matching workshop content. While a lot of those will likely be others re uploading the same things, a ton belongs to mods not under cc.

edgy glade
#

@desert isle Mittens just sent me a PM to ask if he's been banned from Arma chat?

sonic stump
#

@blissful bramble Nope (https://forums.bistudio.com/forums/topic/183063-ffaa-mod-spanish-army-mod-release-thread-current-v606/):

"This does NOT mean users can upload our MOD to Steam Workshop but we, as the authors of the content, will make it available into Steam Workshop platform "when it's ready" . So, uploading our content (full or part of them) into steam workshop will be strictly prohibited except for us (FFAA MOD Team) or developers with a prior / written agreement.

Please, if you see any FFAA MOD content -in its entirety- in the Steam Workshop platform uploaded by any other but us, help us reporting it in this thread, through our social networks or via email in order to take the necessary measures to protect our intellectual property rights. "

fading pulsar
#

👋 hey 😛

#

Alas I'm back and that's been sorted

lilac moss
#

Lil harsh to be banned that quickly without proper Investigation

fading pulsar
#

I would've appreciated a chance to talk but after PMing FM about it he was straight to the point and within a few minutes it was sorted

#

So 👍 tbh, he could've outright ignored me but didn't ,ty

lilac moss
#

Lel ignoring also seems a bit harsh

desert isle
#

I misread the portion that said "our server" as "my server". That bit was entirely my mistake.
The rest of the "investigation" was complete when the user admitted the content was not his. Open and shut case.

neat mica
#

and that folks is why you must always read and understand the EULA

orchid wing
#

Um hello

#

Can someone help me?

#

Hello. My Arma suddenly load up the "old" walking animation with one hand off the weapon.

#

I unloaded all my mods and restarted the game. It's still there

desert isle
#

Have you tried it with a new profile?

orchid wing
#

Uh. I'll check.

#

Ah Okay. It works! Thanks!

hoary mesa
#

Is it control preset?

#

Did not know the animation is gone

orchid wing
#

Idk. Switching game profile works.

hoary mesa
#

So its saved in username.vars.arma3profile file maybe

orchid wing
#

Idk. As long as it works. I'm cool with it

hoary mesa
#

👍😋

knotty flax
#

Had a very interesting issue today that really sucks. I opened the launcher and it wan't to "update" every mod downloaded from the Workshop. I restarted the launcher. NOGO. Then Steam. NOGO. Then canceled the updates and restared. Then ran a "file verification". NOGO. So any other choices before letting this download 40gb to the same verson already running?

And I have not changed any directory locations. No new HDD or moved the game files.

#

<@&105622502444711936> <@&105623147411202048> Any help is welcome. Thanks.

ionic juniper
#

I have had this same issue randomly in the past, nothing you can do.

quaint jewel
#

@Pirate#3152 Happens randomly to quite a lot of people. Only known fix is to stop using Steam workshop

desert isle
#

Ive seen this work for that issue (could have just worked by chance though)

View->Settings->Downloads->Clear Download Cache
That's found in the top left of your steam client ( Steam View Friends Game Help)

snow furnace
#

any idea how i can fix this?

#

please

quaint jewel
#

Yes.

#

Load the Addon that is missing

snow furnace
#

you'd think it would be that easy

#

but there is no addon called that

#

👌

wise barn
#

@snow furnace
CUP Weapons are standalone, CUP Units require CUP Weapons and CUP Vehicles require CUP Weapons and CUP Units.
so it seems like you try to run CUP Vehicles without the Units and Weapons

snow furnace
#

I had every cup thingy on and still got it

#

which is why i posted here and found it pretty odd

wise barn
#

strange, but that is what your error msg says

neat mica
#

installed and enabled?

snow furnace
#

ye ofc theyre enabled haha

blissful bramble
#

Is CUP units up to date though?

#

because "creatures_military_taki" would imply the Takistani units

snow furnace
#

if the one on the workshop is then ye

wise barn
#

it is up to date. some files/units are still dummy units and will be replaced once the actual content is ready for release

lone karma
#

I recently joined a Unit and it shows in "My Unit" tab, but when I click on it, it does not list me as a member and when I try to apply it says "You are already a member of this unit"
It shows me joining the activity list, but not in the member list.
Already rejoined etc. Also happens to other people.

#

Please @lone karma me, when you know a solution or have encountered this problem yourself.

woeful totem
#

I was trying to use ACE but when I put a rangecard in my inventory it does not show in the equipment section in the ACE self interaction menu. Any ideas?

jaunty badger
#

I think you have to enable advanced ballistics.

woeful totem
#

No I'm pretty sure that jsut enables stuff like temperature and air pressure

jaunty badger
#

Did you put it into the backpack?

#

Or uniform / vest.

woeful totem
#

Backpack, that might be it

#

Does that make a difference? Wasn't aware of that if it does

jaunty badger
#

Maybe it does. Some people don't want items to work when you don't have them in your hands, but the backpack. I never liked this idea myself.

woeful totem
#

Yeah I'll have a look at that next time I go on

woeful totem
#

That solved it by the way, thanks for the help

languid nexus
#

Hey is JSRS giving a popup error after game startup for anyone else?
Looks like:
Config: array does not contain 2 entries

#

Scratch that... Looks like it's a known bug from a recent JSRS update.

undone zodiac
quaint jewel
#

@undone zodiac JIP? TFAR btw

undone zodiac
#

ok....is there a solution for this issue, tested on various game modes and all the same

dim void
#

Dedmen asked if you joined a game in progress or not.

quaint jewel
#

I asked you something ^^

undone zodiac
#

soz...started up the dedicated server and join to make sure all is good, had other player join to help with test.

Long range works fine
voice works fine
but shortrange not working

dim void
#

Not everyone speaks fluent arma :p

quaint jewel
#

You still didn't answer my question. Happens everytime or only on JIP?

undone zodiac
#

was not jip, start new server to ensure its working

quaint jewel
#

is TFAR loaded serverside?

#

Dedicated Server or Local?

undone zodiac
#

CBA + TFAR on client and server... on dedi

quaint jewel
#

Are you 100% sure TFAR is running on the Server?
Can you upload a RPT of your Server?

undone zodiac
#

latest version for noth

#

both

quaint jewel
#

What is latest version? 0.9.12?

undone zodiac
#

using TADST mods are loaded correctly

#

the current steam version lemme check

#

tested to diff game modes ...same effect