New to LS

[tropic swan]

Just downloaded LS and configured a few settings. But when playing in team fights in Marvel Rivals where its fps is intensive, you can visibly see a stutter. I capped my fps to the lowest it can go and have all settings on low. Also how do I reduce latency whilst also maintaining low input lag. Not quite sure how this program works and what is increasing and decreasing latency.

[winged swallow]

downloaded 🤔

[tropic swan]

?

Wdym by that

[tropic swan]

?

[radiant lynx]

Did you download the "free" version or the version on Steam?

[tropic swan]

Steam

I bought it

[radiant lynx]

Good boy 🙂

[tropic swan]

And afaik there isnt a free version

[tropic swan]

???? Alr whatever

Could you give me some tips or help me

[radiant lynx]

Cap the game framerate, try to make sure not to overwork the GPU, keep it at 85% load max. What's your GPU and monitor hz and resolution?

[shut sentinel]

What version are you running?

[tropic swan]

And i dont rlly care if it stutters that much as the frames lafg is producing is well over my refresh rate

Its js that the smallest of frame drops

Cause such a noticeable stutter

It wouldnt do this without lsfg

[radiant lynx]

Makes no sense to generate more frames than monitor hz. Cap your framerate.

[tropic swan]

I already told you

I capped ti at 30

[stuck ibex]

Sync to allow tearing wgc if your in win 11 24h2 " or try if dxgi better for u
Inject reflex via latest riva tuner there a setting down there u can find in the sever how to in images frame latency to 1
Res scale 50 percent if u have more artifact if u have 1080 try 70

[tropic swan]

Reflex is already on in nvidia cobtrol panel

Is that the same

[stuck ibex]

No

[tropic swan]

Also image fraces in lossless is supposed to be 1 right

And where is res scale

Under frame generation?

[stuck ibex]

Yes

Resolution scale percentages

[tropic swan]

Like where is it

In lossless scaling

Under frame generation or scaling

Cuz i have that disabled

Give me a pic

[stuck ibex]

I don't have new 3.0 wait a minute they change ui I think it under enable it set 50

[tropic swan]

Rivetuner statics server right

[stuck ibex]

Yes installed with msi ab

[tropic swan]

I didnt install it with msi

[stuck ibex]

Than u must is usefull to cap fps realtime

[tropic swan]

I dowbloaded ut off a website

Guru3d

[stuck ibex]

Yea v 7.3 or some thing
Latest

[tropic swan]

Is it that

[stuck ibex]

Yea

[tropic swan]

How do inject that reflex thing

And how do i use it for my game

[stuck ibex]

And be sur gpu are not more than 95% cause it will introduce extra latency but if u do all those u must be perfect lag 👌 how much is your screen hz

[tropic swan]

How do i do it

Tho

My gou never goes above 60

[tropic swan]

144

I dont kbowbhow to use ricertuner program

[stuck ibex]

Than you're good

[tropic swan]

Hello how do i inject whatevee you were saying

[tropic swan]

??

[stuck ibex]

Gpu ? can run the game at 48 or 72 ?

1 minut

[tropic swan]

HOW DO I INIECT REFLEX INTO THE GAME WITH RIVERTUNER

And limit fps

[stuck ibex]

Add game to list profile

[tropic swan]

Its marvel rivals

What file do i add

[stuck ibex]

The game exe

[tropic swan]

Ill find out with task mngr

There is marvel. Exe

And marcel win shipping.exe

Do i do both or smth

[stuck ibex]

There is if I remember correctly press ctrl + shift or ... with plus button in rivatuner bring list of running games or 3d app

[tropic swan]

It was win shipping

Ok limited fos

Now how do i inject reflex

[stuck ibex]

The one eating gpu ram cpu other is launcher

Enter profile setting

[tropic swan]

Ok

[tropic swan]

Now what

[stuck ibex]

1 sec

[tropic swan]

Im win 22H2

Also nvidia reflex

Is already built into the game

No need

Do i use dxgi

Or wgc

Im win 22H2

[stuck ibex]

Dxgi

[tropic swan]

What is default max frame latency

I dont think that was good

[stuck ibex]

note don't enable 2 reflex from game and rtts use on game this rule for other games too 90% of games run with reflex after at bottom setting if u found game lagy kind when enable rtts than try before ok

[stuck ibex]

Use 1 for best latency

[tropic swan]

It feels choppy now

[stuck ibex]

U use dxgi or?

[tropic swan]

Dxgi

Also wait so i dont use refex in game?

[stuck ibex]

Try change if same and don't use two fps limiter rtts and nvidia one

[tropic swan]

Rtra wdym

[stuck ibex]

Rtts

[tropic swan]

Im using

Look and tell me if im doing smth wrong

[stuck ibex]

Heydid you enter global setting

[tropic swan]

Nono

Im using marvel ibe

[stuck ibex]

Hey did u

[tropic swan]

Accidently took picture of that

[stuck ibex]

Game setting only in rtts

Ok

So u use rtts cap only right not nvcp

[tropic swan]

I dont know what that means

Wdym

It feels a lil blurry as ell

[stuck ibex]

Fram cap at 30 rivatuner one and not both with nvidia control oanel

[tropic swan]

Ik

I didnt

[stuck ibex]

Ok u use reflex from game without enabling it via rtts right fps capped at 30 gpu gpu usage and vram usage are not at max?

U mean now is worse try 48 x3 or 72 x2

Any improvment or ..... ? I am waiting 🙂

What graphic card you have and resolution u have win 10 22h2 always dxgi

[tropic swan]

Sry was gone for a few mins

Cant do it rn anymore

I can only cap fos at ariund 30

My refresh rate is 144

[stuck ibex]

Tryc70% res scale cause at lower fps and lower res it become blurier recommended about 40+ input 45 perfect but recommended for pacing is half of refresh rate or 3rd x3 do you have gysnce enabled and your gpu i think is limited by vram or bandwuth

[tropic swan]

The problem

Is that i cant reach half if my refresh rate natively

Without frame gen

Only to like 50 with drops

I can reach it but it will stutter crazy and i dobt want stutters

So then i have to cap at 30 but then times it to the amount of my refesh rate which id around 5

That introduces a lot of input lag and stuff

Is there anything i can do

[stuck ibex]

Try 40 best input 45 perfect

[tropic swan]

Can i times by a custom amount with ls

Like a decimal

[stuck ibex]

And down res scale until u can't maybe next time will come performance mode about 5% improvmrnt or so

[tropic swan]

^

Can i times by a decimal

Like 3.5

Instead of 4

[stuck ibex]

For what the benefit

[tropic swan]

Becuz x3 wont reach my refeesh rate

X4 goes above and i want to limit as much inout lag as i can

[stuck ibex]

If u have vrr u need 138

[tropic swan]

Wdym

[stuck ibex]

Try down your refresh rate to 120

[tropic swan]

I want 144 tho

[stuck ibex]

People say when gsynce vrr enabled need to have room to not get lag of vsynce or tearing above refresh rate they say 138fps

[tropic swan]

Im saying that x4 gives too much input lag

And the most fos i bc sn get witho it drops is 40

I want 144 hx

In game settings are as low as possible

[tropic swan]

Oh

No input lag with that

Innoretty sure not all monitors have gsync

I think i might have it

If i do then what do i di

[stuck ibex]

3,5 u can block lossless scaling by adding it to rtts than cap ls fps to like 144 than generated frames will be max 144 , but does not have a like perf benfit and with bad pacing
And many users rtts won't cap ls if so use nvidia control panel add lossless and cap it at 144 try if u get better its not recommended fg work as 2 3 4

[tropic swan]

Ok cool but how do I cap ls fps

And what is rtts

Sry for not knowing anything

[stuck ibex]

Best Input is x3 use 48 46 try and see

[tropic swan]

^

[stuck ibex]

Rivatuner sta... server nvcp nvidia control panel

[tropic swan]

Tell me how to do it step by step in like 20 mins

Cant do it atm

Thx btw

🙏

[tropic swan]

Cant elly get to 48

B ut will try later

[stuck ibex]

Easy add ls as a game in rtts right frame limite from 0 right 144 that's it

[tropic swan]

Cya in 20 mins

Ok

[tropic swan]

I added lossless scamibg exe to rtts

And put 144

On it

Didnt affect it

Its still at 180

[stuck ibex]

Go nvidia control panel add ls to app list than on bottom frame limite name i forget put 144 there but nvidia not real time u must restart app if not work restart pc it should work

[tropic swan]

worked

does this mean

that i will be able to use x5

but have lower latency

[stuck ibex]

Almost all times 3x faster even than 4x with better quality so try and see

I have some extra tweak to help in latency if u wanna try

[tropic swan]

I found the method for me

Frame gen x2 or x3 on some maps

Fps cap at 45

Then wgc

Working fine for me now

Finally found the best settings

It has relatively low input lag as well

[stuck ibex]

GG enjoy ❤️

[tropic swan]

Nvm js realized that it looks so much more choppy

Than pn dxgi

Wgc isnt good

[tropic swan]

Gsync/freesync guide

Worked

Frame drops

But they arent noticeable

Pretty smooth

[heady mantle]

guys what are the basic tips for minimal input lag?

these are my settings

it's kinda noticeable in re4

oops its in portuguese

wait a sec

there

[tropic swan]

Uh

Turj on nvidia reflez

Through game or rtts

And then max frame latency

1

Nothing else since you alreayd have it on lowest (x2)

X2 shouldnt be noticeable

[heady mantle]

thx

[tropic swan]

I play on x3

[heady mantle]

its much better now

[tropic swan]

Is it?

[heady mantle]

i didnt have nvidia reflex trough rtss aswell

[tropic swan]

Lol i didnt think changing it to 1 made a difference

[tropic swan]

Are you doung it now?

[heady mantle]

i think it was the reflex that made the difference

i had it set to 3 because it feels less choppy

specially in elden ring

but id really now what it does tbh

higher = more latency?

[tropic swan]

The max frame latency

No lower makes less latency

But if 3 works for you

Then leave it ig

[stuck ibex]

Sync .mode to allow tearing it make a difference and with vrr tear free cap your fps don't let's gpu more than 95%

[tropic swan]

That free sync guide you told me to follow earlier worked