Wiring

[ancient flame]

So some of the circuits are in the ceiling and if you Wann remove them you cannot and just end up with wires flowing form roof the annoying bit that causes this is the doors on barsuk that we made automatic and removed some wiring but could not remove it all and ended up with doors with wires flowing down please add some way to remove the curcuits best thing I can think of is making a plasma cutter reveal them if you damage the roof/hull enough

[shell marsh]

You need to find the other side of the connection to fully remove wires

Its quite good at deterring griefers from putting in the effort

[ancient flame]

how do i get them if they are inside the hull?

[grave mulch]

I think they mean the components

[ancient flame]

ye

[grave mulch]

And you can plasma cut the wall to get to them?

It'll just flood the sub

[ancient flame]

i want to be able to do that

[grave mulch]

You can

[ancient flame]

and it would be more of a at station after clearing the sub

i tried i couldnt see it

[grave mulch]

Did you just plasma cut to wall or break it open

[ancient flame]

ok so i can do it jsut tested but i think what happened last tiem is for the internal floors/roofs it turns into a black void when you do it so you cannot see it and you may not be able to reach it sicne you fall

so ignore the hulls part jsut itnernal walls if its at the edge of it its fine but in the middle its hard to see and cannot be reached

[charred helm]

having wires come out like that is infuriating because you can't actually remove wires

i don't want to - and can't - remove the junction box from the wall

or let's say it's a relay component with a dozen lines going through it and i happen to mess one thing up

i'm not going to remove the relay component, but now i have a hanging wire

we should be able to remove wires