MPE not working on P3 in Live 12.2.7 on Mac in controller mode

[fleet tinsel]

Moving this here from the general Push thread.
Using ShowMIDI, I see that the P3 is sending pitch bend on the Push 3 Live Port. PB is showing a range between approx 8088 and 8250.
Slide is showing as cc 74, with range between 0 and 127

[hollow flicker]

This is my configuration: Push connected directly to the Mac in Control Live Mode, Live 12.2.7 and Push set to "Control Live Mode"

This is how Push is set

Loading MIDI Monitor (choose the MPE tab in the device) on the first track shows this

[fleet tinsel]

looking at Ableton's midi monitor on the track, nothing at all is happening for PB or slide, still. Pressure and velocity are working, still.

On Push the expression settings are MPE mode and notes pitch bend automatic. I even tried setting the Push epxression setting to pb on, as @naive heath suggested was more reliable

Clearly something is blocking Live from seeing the pb and slide data

[hollow flicker]

Ok. This is what I’d do before checking with our devs:

1. Using a different USB cable
2. Reinstalling Live
3. Resetting Live https://help.ableton.com/hc/en-us/articles/209070609-How-to-reset-Live

[fleet tinsel]

To reinstall live, do I just re-download it and run the installer?

I don’t need to delete it or anything right?

[fleet tinsel]

So, I switched the USB cable, and no change.

I reinstalled Live, and no change.

Now I will reset Live.

OK, resetting live = still nothing from PB or slide.

Settings post reinstall and reset

[hollow flicker]

Can you turn off the checkboxes on both Ableton Push ports?

Anyway, I’ll check with our support team tomorrow if they have any clue

[fleet tinsel]

Done.

[hollow flicker]

@fleet tinsel can you create a Status Report (follow the instruction here: https://help.ableton.com/hc/en-us/articles/209773605-How-to-create-a-Status-Report) and send it to me via DM?

[fleet tinsel]

Will do when I get home in a few hours. Thanks!

[fleet tinsel]

Uploaded status report

[fleet tinsel]

New issue, Live is NOT SEEING Push in standalone mode, and can't connect to it despite both of them being on the same wifi network... Argh!

[hollow flicker]

Here’s how to troubleshoot the network connection:

https://help.ableton.com/hc/en-us/articles/8863121037340-Troubleshooting-Push-standalone-Network-Connection

[fleet tinsel]

My Push is showing it is running Push 2.3b17, but it also says that it is up to date. Do I need Live 12.3 installed for it to update to Push 2.3 full release?

[hollow flicker]

You need to switch back to the non-beta stream as instructed here: https://ableton.centercode.com/project/article/item.html?cap=ecd3942a1fe3405eb27a806608401a0b&arttypeid={e70be312-f44a-418b-bb74-ed1030e3a49a}&artid={01A488CC-221F-43ED-A790-FEE51BDB7FBA}

[fleet tinsel]

very very slow update to push 2.3, but it does appear to be uploading... It's at 2% after several minutes...