For HDZero Goggle | Walksnail | Page 1

analog dock Jan 16, 2023, 10:30 AM

#

This is a too reasonably printing shell for the Walksnail Avatar VRX, with the HDZero Goggle rail system.
https://www.thingiverse.com/thing:5778550

Walksnail VRX for HDZero Goggle by 4runner

Dies ist eine zu vernünftig druckende Schale, für den Walksnail Avatar VRX, mit dem HDZero Goggle rail system. Ich habe alle Antennenverbinder auf SMA gewechselt, somit kann ich alle Antennen der HDZero auf dem Walksnail Avatar VRX nutzen.
This is a too reasonably printing shell for the Walksnail Avatar VRX, with the HDZero Goggle rail system. I...

eternal summit Jan 16, 2023, 5:02 PM

#

analog dock This is a too reasonably printing shell for the Walksnail Avatar VRX, with the H...

I mean, why not another position from the antennas?

rancid mauve Jan 16, 2023, 10:22 PM

#

https://www.thingiverse.com/thing:5764848

Walksnail Avatar low profile VRX clip for HDZero goggles by aviphysics

Designed for PETg printed with 0.4 mm nozzle on 0.2 mm layer height. See images for print orientation.
Mirror part for the other side.

#

https://www.thingiverse.com/thing:5768145

HDZero Goggle x-air clip compatible with Avatar low profile mount b...

Designed to print as shown in image at 0.2 mm layer height with 0.4 mm nozzle in petg. See images for recommended print orientation.
Heavy and Lite versions are the same, except that the heavy version doesn't require as many retractions and should be more durable.
Fit should be pretty tight, so it will stay in position.
Designed for use with thi...

#For HDZero Goggle