#technology-discussion
1 messages ¡ Page 341 of 1
true. it's unfortunate that HDMI still has obvious limits. I've came across more faulty DP cables than HDMI cables.
that's because DP doesn't charge a fee so it's much easier to make a shitty one that doesn't do anything
yep. even now, one of my DP cables I am using is not perfect. sometimes i boot up and there's no display, only workaround is to bend over behind the monitor; unplug and replug. its annoying lol
based quality cable design
if only there was a robust connector that used a single reinforced conductor
wtb hdmi cable that supports high refresh rates
and was more than capable of handling the data rate over an effectively unlimited distance for most use cases
just make a VGA design that can support high refresh rates.
oh wait, there is
i dont think i ever came across a bad VGA cable
ironically it's because VGA uses a voltage-based data regime, so the shittiness of the cable isn't as pronounced over distance
the clock-based DVI/HDMI/DP regimes have strict timing requirements so you end up with the data shitting the bed after a few feet in most cables
BNC gang 
which makes sense. any 6feet+ DP cable I've bought has had issues after a few months.
Once I move and have larger space I won't need such long cables.
yeah, that's because the signal attenuation is bonkers on shitty cable stock
it's even worse when the cable is demanding high frequency/bandwidth
but is it worse than USB
unequivocally
I think it's unfortunate that modern GPUs only have 1 hdmi port. never understood that.
HDMI ports cost money per output
doubt we are talking much more though. nvidia already asking a lot at msrp anyways lol
Can HDMI 2.1 do 120hz 4K?
listen, leatherjacketman needs more money
ostensibly 2.1 can go to 10k/60
leatherjacketman can screw off
they are trolling at this point
but the HDMI consortium apparently decided it's OK to have HDMI 2.1 labeling on the box and support zero HDMI 2.1 features
đ
lets release a 2060 with more vram cause thats what the market wants, mhmmm
techbro marketing
I mean, in their defense, the 2060 uses an older process that probably isn't in demand, so it's essentially "new capacity" and it's not any worse than the 1650s a lot of ppl are buying
their logic is that you can't have HDMI 2.0 licensing anymore, so your device must be HDMI 2.1 compliant and it's on the consumer to figure out what features their bullshit device actually supports
oh I recognise BNC
their logic
full stop
we call that coax here, use it for TV aerials
So they're a standard that isn't a standard... what are we paying them for?
the 2000 series was a joke tho. and nobody really needs 12GB of vram for gaming. at least not now
you're paying for sony to stroke their dicks over foisting a bad spec on consumers for over a decade
they should use the resource of the "new 2060" to just make more 3000 series.
it's not like USB is any better with the 10 different versions of USB 3.0
someone said the extra vram makes it good for mining but idk
How? 3000 series are made on 7/8nm process and 2000 series is like 12nm
quick, quick, if I bought a USB-C cable, what features does this cable actually support?
the leap from 1k to 2k series wasn't really that big.
it supports going in upside down
gotem
I agree. Which is why I didn't buy one bc it was basically just 1k series + the tensor cores heh
the problem with decrepit standards bodies is that someone eventually goes "wow, this standard is bullshit" and develops a whole new standard
But they're already producing new 1030GTs over the last year+ so everything is already fucked
i imagine it does make it good for mining. which is cool. but tweaking a previous gen card with more vram sounds like slick marketing to me.
and im sure some people will eat it up "2060 has more vram than some 3000 series, this means 2060 is better"
i bet some people actually think like this.
probably
At least they aren't trying to upmarket it as a new model. It's clearly labeled as a 2060 12GB as compared to the original 6GB
I wonder how effective slapping like 50 Ti4600s together in a chiplet format using a recent transistor process would match up against a monolithic asic like turing
since the ti4600 was like, actually pretty fuckin good for how simple it was and how small the die was
is a 1030GT actually significantly better than a current gen onboard gpu or are they just for cpus without onboard?
Probably the latter, but I don't know for sure.
new model? no. but they are selling it under the impression that is a "premium version". slightly more cuda core, slightly higher base clock speed, and extra vram no one asked for.
GIven the naming scheme it's significantly worse than a 1050, which is saying something.
it reminds me of remastering old video games lol
I'm still sad that AMD never allowed APUs to crossfire 
apu? omegalul
Crossfire is dead ain't it
at the driver level it's dead
because the driver sync stuff became too difficult for amd and nvidia to handle
so they offloaded multi-GPU to directX, which DX12 supports but you have to write your whole-ass engine around enabling discrete multi-GPU at the hardware level
crossfire / sli was always a weird concept to me. i doubt its ever going to come back
3090 already requires hella power. 4k series is going to be even more i imagine.
SLI was great when it actually worked
introduced dual 4090s, recommended 2000w PSU
the problem was that if one GPU fucked up a frame timing the entire thing would choke the driver and it would crash the whole graphics subsystem in the OS
I had so many nvidia driver crashes from SLI when I had my 2x780 config, and practically zero when I went back to one GPU
yea back then it was great. but now it's ancient tech. considering power consumption of latest GPUs alone, it doesn't seem logical
and with how powerful they are getting, the extra frames isn't really necessary imo
sure, to me it's dead though
most of the games i play would not run well on a igpu
When SLI worked well it was nice to have
also im amd this time around, which has no igpu
I remember I got near perfect scaling in BF3
huge world of computer users out there who play no games though
igpu is fine for fb/yt/etc
ofc. if your not gaming then it doesn't matter what you have really if your just surfing the web.
as i said earlier, to me it is dead.
since i have not used a igpu since like, 2010
Iâm happy for you
oh lord..
how about buy her a first aid kit so she can treat all your self inflicted injuries?
Sli scalability was a joke at launch
I haven't renewed my first aid training in years
In case a server rack falls on someone and they're crushed under 30 petabytes of storage?
they think if Sarah is first aid trained she can self-treat all her numerous workplace injuries and save them tens of thousands in insurance premiums
Anyone know a good, cheap option for mmo mouses?
how many extra buttons do you want?
logitech g203 is cheap and awesome, has 2 extra buttons on the left
I have the g502 currently but i want more, especially with playing ff14
does anyone know anything about dell poweredge servers xD?
razer naga
is ur only option really
Corsair also has the Scimitar which has like 12 buttons
Was looking at that or the g600
I always wonder how you accurately press a specific one in the heat of a fight
Probably just a feel thing if i had to guess, never used one yet
ahh the first aid kits at work are amazing
they have eyedrops and pepto bismol and pain medicine and all kinds of stuff, besides the usual
Assuming people remember to refill them and/or put them back after using.
the company that supplies the cabinet sends someone every month or two I think
it's always full đ
lol
admittedly since I work from home, the majority of my injuries would be too
but I have cut myself a few times at work
and banged my head on a few things too x_X
well, more like bumping my head on the desk from getting out from under it
uhh I shutdown ffxiv and this message popped up
yeah that happens sometimes
Seems like dx11 is acting up lately
either a bug in xiv or one in windows 11
drivers are usually the first suggetion but clean install does nothing
so will have to live with it for now đ
i see
friend of mine is having this weird camera glitch
its snapping character models and they move with the camera turning
it has fixed itself, weird
never mind its back
sounds just like lag to me ngl lmao
camera glitches ftw
i am looking
for
2.5inch
euh
not sure if SAS or sata
đ¤
but they're hard to find bigger than 1tb lmao
it took me a 2 minute search to find a 4gb 2.5inch sata ssd are you okay
4gb?
probably meant TB
could always get a compact flash adapter to make that happen
tb yeah
Huzzah to america i guess?
Biggest i found was 5tb tbh
But out of stock everywhere
And i aint gonna put ssds in my server
Overpriced for what it can do lol
Come on, 8TB NVMe or bust
that fancy server you bought doesn't take 3.5" drives?
fancy
Super fancy

Wym fancy, its a 2u case that fits 4cpus. and 6 drive bays Ofc it only takes 2.5 for space xD
Dell makes trustworthy stuff
But theyre horrible with decisions
ahhh what can brown do for you https://www.reddit.com/r/pcmasterrace/comments/rftkut/my_noctua_theme_build/
someone said the colors didn't work, OP said they aren't 14 anymore, I said that comment makes them sound like they're 12 now.
wtf
Anyone know any fix?
try again now, someone was saying the login server was down. it doesn't really specify the problem so no easy way to tell
Yeah I could log in after a bit!
turned off smt in ryzen.. no crash for several hours.. i hope it fixed the crash
that's awful
ye it looks cool when ppl place their fans like that but i feel like it has no purpose at all lol
âI make my own MR2 Spyderâ
My old laptop could press prntscreen and take a pic instantly and save it
My new one makes me snip and save it up
How do I fix it?
If prnt screen isnât working check to see if you have the fn key on
Most laptops have a numpad that is activated with the fn key
Some are toggle press some are toggle hold
pressing both fn and prntscreen gives me "Screenshot failed"
Oh this is usually caused by OneDrive blocking XIV from writing to the documents directory
Disable OneDrive and see if that helps
You may have to restart your game though im not entirely sure. Try just disabling it and if it doesnât work restart the game
I uninstalled OneDrive and it still gives me that "Screenshot failed"
oh wait wrong folder
how do you change the screenshot hotkey
Anyone having a login problem on their client where it keeps saying incorrect ID or password?
I'm using OTP, and I also tried logging into my mogstation and succeeded however I can't log in to my client
Should just be in the keybind menu
You can also change the directory where it saves screenshots I believe itâs under the other category with the 3 dots as the icon
Make sure there is no white space before the first character and itâs case sensitive so double check you donât have caps lock on
Yeah pretty much

The reason youâre getting that screenshot failed error is because something is preventing the game from writing to documents directory or youre low on space
You can test the write theory by trying to add a gear set, if that fails then I am almost positive one drive is the problem
Itâs possible you have to restart windows too but in most cases you shouldnât have too
it's still print screen but the snipping tool overrides that
Are you saying when you press the key it opens snipping tool?
Well rather triggers it
@deep sapphire it's weird really, cause I am 100% i input the right username pass and OTP
Open that sub menu on the task bar in the bottom right and right click it to close it
The little arrow
All I can say is thatâs usually the culprit or youâre typing the wrong account info in, try just pressing backspace before you type your username and password
The little arrow in the bottom right corner?
the submenu doesn't have a snipping icon
where do I find snipping in task manager
Under processes or services
If you still canât find it do this
Itâs a useless program anyway I suggest using shareX for that
I can't find Snipping exe
I've already opened Services and can't find it there
like I check "s" section but no snipping tool
Go to add or remove programs and see if itâs in there
found it
I'll uninstall it
I'm still getting the same screen I did before so what am I doing wrong?
Did you confirm that OneDrive is disabled
yes
okay I'll try restarting
but like it doesn't make sense since I uninstalled both OneDrive and Snipping
Itâs possible the drive is still being write protected, you can check to see by right clicking the documents >> my games >> ffxiv folder. Right click it and go to properties
On the bottom of it doesnât have a check mark on on write
I'm still getting the drag and snip
ok
i really tried, did the backspace, didnt work either. Also logged in on a browser, and it worked, but everytime i try to log in the client it just states the same thing
Well if you want you can try using the XIV quick launcher
Itâs not official but itâs a good launcher
The only other thing I can think of is something to do with the cache being all fucked up as it uses internet explorerâs api

Not for long though I have to attend this training class in 10 minutes
HOW TO MEASURE CLEARANCES
FRACTIONS AND DECIMALS
FUN STUFF
I wonât be available for awhile so if that didnât work check to see it has write permissions in that folder, also make sure you have enough storage on your boot drive.
@deep sapphire help
is this in built or something
i somehow got it to work with turning off my vpn
it works fine when I use fn + print screen but
I could use print screen and fn and ss
But now I think I accidentally broke something
I was following someone's instructions and before I uninstalled Snip and Sketch it worked fine
I was told to restart
in the 1 minute between you saying you could use fn + print screen and then saying now you can't, what did you do?
I uninstalled Snip and Sketch most likely
did you change keybinds in xiv?
No
so reinstall it maybe
Already did that but still can't use fn print screen
Lemme try restarting the game
see if num lock or scr lock need to be toggled
I don't have those
I think I'll restart my computer and see if it helps
you will have those somewhere, likely need to be pressed with fn
sorry, no idea, it should work
I think either uninstalling snip & sketch or changing attributes of folder from read-only must have broke it
nothing they told you to do should have suddenly made it go from working to not working
Oh wait I keybinded so
I asked if you changed keybinds and you said no >_>
I thought I didn't
welp that should fix it
try windows key + shift + s
thats the windows default keybind for the snipping tool
what's this then
I told you
that is the snipping tool
snip and sketch
windows shift s is that
it's the new version
you can literally use that for a fullscreen screenshot
click the button left of the X
i recommend getting used to the snipping tool. imo its faster and acts as a ctrl + v paste. snip what you want, ctrl v into discord or some other application.
I'm also a fan of alt+prt scr for taking a screenshot of just the active window
yea thats handy for a fullscreen shot of the window. also can be pasted after using the keybind.
yeah, I use it a lot when working on stuff with other people
snipping tool was one of the best additions, gone are the days of print screening and pasting into paint lol
tru
wut
the snipping tool
whats weird about it
I use lightshot which is pretty similar to this new version of the snipping tool
yet it's much easier to do
oh.. lightshot
ive heard bad things about lightshot. im surprised people still use it
bad things?
yes. it uses some sort of internet base to store all screenshots. there are plenty of peoples personal information, pictures cough of people and it can be easily accessed.
yee lightshot uses web-scraping and people have uploaded there own scraping scripts on github to get peoples personal information. every screenshot taken is practically a random URL created.
Think of imgur, but worse.
damn
SK hynix's 24Gb (3GB) DDR5 memory chips are made using the company's 1anm fabrication process that relies on both extreme ultraviolet (EUV) and deep ultraviolet (DUV) lithography to increase device density without sacrificing yields.
I assume that doesn't mean 1nm process bc isn't that impossible given 1nm is the width of 1 atom right?
ShareX just makes it so much easier
Fax the screenshot immediately
Convert image to morse code
Fuck you Outlook! Finally remembered to track down this stupid setting and turn it off. I don't use the web Outlook often, but that was maddening bc if you don't want to use their suggestion it fucks with your normal typing in a similar way to autocorrect on phones.
Put 2 more fans in my case, just need one last one to fill out the bottom.
I was going to ask, why's there a controller inside the case
but it's just the reflection
is that a lian li 011 dynamic?
đ
wait waht
yeah it is

might get one of those but problem is i wanna get a new motherboard before i get a new case
not a problem actually but something i wanna wait for
its in there to 1) fill out space since it is a bit bare with no fan or anything in there and 2) i don't use the controller, it's green so matches the colour theme and i think it looks cool, its p much a paperweight to me so thought i'd showcase it in the pc đ
lemme just say, the lian-li 011 is a fantastic case to build in and looks super clean
its apparently cliche and many people use it but theres a reason why loads of people use it đ
i think i'll end up changing everything in my pc atm apart from the gpu and cpu tbf
and re use my ll120 fans
also have you ever had issues with using your AIO? like any issues with noise or anything like that? @blazing panther
oh I see 
nope no issues myself, you should know that its one where the pump is in the rad not the cpu block, so its a bit different than most
oh cool, never seen one of those before
had an nzxt one but swapped it for an nhd15 due to the pump just being noisy
means I could almost always mount it and it be fine
that has the pump over the cpu
did you have it mounted properly so the rad was higher than the pump?
well, so the highest point was in the rad i mean
it was lower but i did have it for quite some time so i think some of the liquid had evaporated
ah yeah
best thing about the pump integrated into the rad is that it can almost always be mounted correctly đ
but yeah i've had no noises myself, had it for a few months, can't remember when I actually got it tbh
never knew there were pumps that were integrated inside the rads themselves thats awesome
You have a problem, seek help! /s
Hehehe 
This doesn't end until you bring about Korean Fan Death upon yourself!
Dousing yourself in ice-cold water and lying on a bed surrounded by 192 fans addicted to the evaporative effects, isn't the way!
đ
its okay I'll stop at....
9 case fans and 3 gpu fans

lmao damn my pc will have 12 fans when im done đ
I only got 5 case fans 
I should get rid of the glass and build a side panel out of 120mms
đ
Oh dear god. I won a 90mm 7200pm Delta years ago at a LAN party. I had to stop using it bc it sounded like a blow dryer and you could hear it on the other side of the house.
ehe that anime
was scrolled up to catch up and as I scrolled down I did not think those were her knees at first
hmm wait it's not the anime i'm thinking of is it
Fio was her name was it? Or Rio? I forget
Kemono Jihen
It's from Yuushibu
It's a lot more entertaining than you would expect from the synopsis and she's quite endearing despite being walking cheesecake
A single delta fan technically has enough cfm to cool a gaming pc on its own, lmao.
That's why I loved the Blue Orb I had back in the day. Everyone else had 90mm fans and that was 120mm with the heatsink surrounding the fan. Lots of area for dissipation while being super quiet bc it ran at like 800rpm instead of 2000rpm
More airflow at lower rpms
sadly large fan case meta never became a thing :c
My friend's last case had the 220mm on top lol
Maybe that one was 200mm and the 220mm was the side. I just remember it was the entire width of the case
I have the Corsair 570 something and that works well enough. 2 on top with the 240mm radiator, then 3 front and 1 rear
For everyone that has 0xc0000005 crash on AMD cpu, disable SMT in bios/uefi or ryzen master.. sending this for future reference if someone will search this
remember my friend
who said he had the motherboard issue
becuase the motherboard wasn't updating
@modest moss
LOL
couldn't update bios yeah
welp, that's fucked
I told him to get a cheaper board
he wants to buy a godlike again
used ls like 350
needs a board that supports 3 m.2 slots
and hes going to be giving away the PC to his kid
I'm like dood; just get a cheaper board
and slot the NVME in a PCI-E adapter
ah my dyslexic ass read 570
i only remember the fatal1ty board with 3 m2 slots
from asrock
but dunno if thats even in market still
I think he should go with the cheaper option
Why do people do this? 99% of people have no use for any board over $150-200.
As you said, worst-case scenario you slot the extra into a riser
There just isn't a practical way to OC anymore. The margins on CPUs and GPUs are just so much tighter than they used to be
But also sounds like a airplane taking off lol
Didn't know there was a way to turn it off or configure it. I just remember watching a video a few weeks ago where someone was explaining how people used lightshot to screenshot sensitive information & that it was easily accessible.
Unfortunately. It's not how it was back then. The most I can do on my ryzen CPU is enable PBO advanced & configure curve optimizer for a performance boost. OCing ram is slightly fun though
I know you already bought this but if you spend like 10$ more you could get the EK 360mm/Arctic freezer 360mm which is one of the best AIOs on the market.
yea the only thing you really get now is fancier looking boards and slightly fancier onboard stuff
Unless you go 12th gen for that ddr5 support. Which is a hoax. But niche I suppose
It's not really a hoax, but the DDR5 ram won't be an upgrade over DDR4 for a couple years yet
It's a hoax at the moment. In a few years, I'm sure it will be. Ddr4 was like this in the beginning from what I remember.
Tests I saw it was about a wash with a few places where it was slightly ahead. But of course with less produced the prices are higher, so there is no incentive to go with it
Yup
The fans I recommend are the phantek t30s. Probably the best performing fans on the market when it comes to static pressure, build quality & noise level.
I recommend Arctic F12 because they're cheap af and fine
yeah very few people need turbonerd hobbyist kit
Arctic f12s are great. I have them on a guest build I did a while back
based on the last price I paid for those Arctic case fans, the Phantek T30 is ten times the price, just not worth it unless you're either rich or pushing hard for super high performance or both

Wait you paid 3$ per fan? Wtf lol
Where u find that price
ÂŁ but yeah, I got a 5 pack from Amazon for ÂŁ14.55
it was admittedly 2019 and I'm comparing today's Phantek price
Impressive price. These days they are like 7-10$ a fan. Which is still pretty nice
And yea the phanteks are niche. No one really needs em. PC building is the only "entertainment expense" for me, so I go all out when I can lol
42$ for 3? It's 86$ for 3 on Amazon lmao
current 5 pack is ÂŁ22.28
ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to con...
Ohhh
Still. Thats not bad
Thats on Newegg? I need to check that out
Amazon currently lists 85$ for 3 I believe
in fact the cheaper ones I got in 2019 were the silent version, so a little nicer
Yea thats nice. Arctic f12s are great performing fans. And there AIOs are top of the line for a pretty nice price
fun pointless fact: I've never used an AIO
Don't really need too. Air coolers can easily perform on the same level
I'd say it's more of an aesthetic preference than anything. Some enjoy one over the other.
I've never built or repaired anything that's needed more than a hyper 212 evo tbh
I dont think there's any CPU that actually needs a high quality air cooler or AIO.
Maybe there is, I just dont know of any
Oh right
The 12900k is spicy as fuck
Might actually need some beefy cooling for that thing. The power draw is absolutely nuts
We're talking 200W+ . It performs like a beast but sheesh it is spicy
Isn't the 11900 worse?
Yea same. I got the 5800x shortly after launch. Going 12th gen would just be a waste of money. I might hop to next gen AMD if it is promising. Otherwise I'll wait gens later.
Oh neat. Micro atx build. I've always wanted to build one.
Lol
What case is that?
Ohhhh. Ive seen that before
That thing is tiny
Halo infinite gamer juice. Love to see it
You should. Or cinebench. I dont have the 3dmark paid version so I can't choose whether to do GPU or CPU test.
Defaults to both sadge
Also my 3dmark score I posted the other day is kinda skewed. I cranked the mem clock on my GPU as far as it could go without crashing omegalul
Yea I need to grab it at some point I'm intrigued by the other tests it has
My H100 is still kicking on my main system. I'm on the fence on whether to replace it or not. I did some Prime95 recently and the CPU stayed below 75C so that still seems like its doing quite well.
Yeah your chilling. I only replace AIOs every 5 or so years. Or when I can notice it dying on me
That background... lol
I dont. Anime is the future afterall
I can't show my background atm cause I'm behind a VPN but mine is kinda cringe
Streaming revenues make that much? Because I guarantee they don't sell that many BDs anymore
Honestly I think that picture is false asf. But I notice the fan base growing.
That's the thing, I installed it on my old system in 2012 and moved it over to my new system in 2019 
Sheesh. Im surprised. Keep it trucking then. Squeeze all the life you can out of it
You should see my old AIO. The rad was so disgusting I almost threw up when I saw it.
No gurgling noises or anything, so I don't think there has been much evaporation. My roommate has a year old coolermaster that already makes weird bubbling noises sometimes like it's struggling to push thru water
I wonder if I have a picture
Coolermaster makes AIOs?
Wow never knew.
I attacked my H100 with airduster generously before moving it over
I think they have a budget air cooler that works well
Or maybe im thinking of a diff brand
The mesh filters on modern cases do a really good job of prefiltering air, so there isn't a ton of shit in cases these days
I pulled my old Radeon 5830 out of storage a while ago and gagged at the caked in dust in the fans lol
lol
i want a video xD
I imagine a lot of computers do if you have direct sunlight shining on them
you know what I mean? Like if you have direct really bright sunlight in a room, you can usually see all the dust floating in the air?
Ah ha I found it.
Feast your eyes upon this disgusting rad
Thats a nice score. Only 1.2k less than my score.
Way better than what you showed me the other day
If I didn't OC my ram or cranked mem clock on GPU I'd be at 11.3k average
Probably still better than the back of your refrigerator
Probably. That radiator was impossible to clean
Best bet is probably just blast the shit out of it with an air compressor nozzle
The only reason why is because I was dabbing a lot next to my computer. So the dust would become very sticky. Then harden up like chalk.
Yeah I've tried that. I just ended up throwing it out. I couldn't stand it
Oh, in that case probably have to just buy a couple containers of rubbing alcohol and soak it
I soaked the entire thing in warm 99% IPA. Made little difference
Ever since then i made it a mission to not dab near my computer. I refuse to get that kind of buildup ever again lol
I still vape near my computer though. Cause I can't be bothered to go outside. But the buildup on my computer is nonexistant when I vape. And most of that is probably due to the nice filters I have on my case.

Previous case I had, had 0 filters. For some reason I lost them lol

How do you lose filters? You take them off, you wipe them down, you put them back a minute later. Done.
About that. My filters on my old case were extremely bad, like my radiator. So I was soaking them for days, rinsing the alcohol and repeat. I dont remember what happened after that. The roommate I had at the time might of thrown them out or something. I have no clue
dawn dish soap and a brush would've worked better and taken 10 minutes
Was that from the original, or is there a new movie coming out? lol
that's the original
I assume it's been remastered, but it looks better than I remembered
I would definitely watch a new one
I tried dawn dish soap before IPA bath. Unfortunately dab residue is just very painful to get out especially when it acclimated for over 3 years.
IPA bath
Good thing I now quit and don't have to worry about that anymore. But yea. Never want to experience that that lol
try oatmeal stout next time
I have to imagine they have some plans to bring him back after meme'ing him in two different Marvel series so far
I dunno, I just read Lea Thompson asked them to reboot it and they said no
Aww
I'll keep that in mind for the future. But I dont think I'll have to go through a painful cleaning experience like that ever again. I've gotten in the habit of cleaning my PC every few months.
just like when you ask someone with the chaos dc role to reboot and they say no in this channel

Replacing mobo on a laptop. Your patience exceeds mine
When my Alienware laptop was dying and I tried to diagnose the issue; I opened up the laptop and realized how much I gotta unscrew just to get to the meat & bones, I instantly gave up.
those are fun sometimes
you take it apart, put it back together... and have spare parts
the first time I took apart a laptop, it was a toshiba with a 75mhz pentium i think
Or lose the screws/forget which screw goes where
it was this ridiculous pcb sandwich
when I put it all back together, I had this fairly substantial piece of metal (shielding probably) and I couldn't figure out where the F it went
Lmaooo
the laptop spent the rest of its life without that piece of metal and worked fine
Taking apart a laptop a few times made me appreciate desktops a lot more. I just... can't. Ugh
Beer? LOL
Oh. I see what you mean
you get the special pentalobe screwdriver with the fucked up hole in the middle
and then you unscrew the like 10 screws holding the bottom on
and that's it right there. everything
I mean it's all soldered on so there's nothing to be done
Omg lol
oh okay lmao
I would never đ¤Ł

or you get a dell xps and you can do the same and actually change parts
just use brake cleaner
or you get one of those stupid precision 7 series
on your sticky keyboard
where the bottom is two panels that are held on with plastic clips that randomly come loose when you're bored fidgeting in a meeting
Something tells me you have tried this
and you leave the meeting and the bottom of youjr laptop falls off
Oh lord
it'll strip the paint off the keys and over time break the plastic down
i use isopropyl 70% on electronics all the time
I used isopropyl alcohol on my plastic membrane keyboard years ago and it similarly did the same thing
you only need the 99% if you're going to dunk your parts in it
and if you dont want your eyebrows
or shout gibberish in a foreign language and toss it into your computer
Yea 70% still does the trick. I have a few gallons left of 99%. Don't ask why I bought that much.
dude we don't buy windex or lysol or whatever
we just buy rubbing alcohol and put ti in spray bottles and use it for everything
I relate to this
unless its a honda because the paint would've peeled off anyway after 3 years
sometimes when I go to like target, I'll buy 6 big bottles
and the cashier will always be like "... what do you need all that for?"
lol brake cleaner
what, they don't wipe their car off with the squeegee
at the gas station
Little does the cashier know, I used isopropyl alcohol to clean my paraphernalia when I smoked. I always tried to come up with some excuse
I only recently found out that was a thing
brake cleaner is the greatest thing ever invented, next to dawn dish soap
actually I like dawn more
Yeah lol. I bought out my Walmart one time everyone gave me the strange look
My cart was filled with qtips and isopropyl.
Thats it.
dawn is legit the most amazing surfactant ever made
WD40 is also good too
specially for industrial grease stains
i mean, we use a lot of alcohol at work
NO DRINKIN ON THE JOB
that's like the default if you want to go into the clean room
you have to wipe down anything you carry in with alcohol
Like my new Facebook page for Sweet Memerinos : https://www.facebook.com/SweetMemerinos/
I upload videos I find on 4chan and I can't always know if the videos originate from a YouTube Content Creator.
If you are the copyright owner of a video I post and or want it taken down just notify me by comment or message and I will delete it.
This chan...
Dawn is amazing for getting tempered glass panels to be spotless
and then use the shoe cleaner
I hate seeing my fingerprints
I use dawn to soak my work clothes and it does a great job
hmm
Bruh what
if you want your glass spotless
im a mechanic I get very dirty
you can just use plain water usually
Oh
dawn works great at getting out dirt
preferably a microfiber cloth
and grease
you insist on jumping into the oil barrel every day against everyone's advice
... because it's a giant sheet of tempered glass
I was like "have u ever heard of laundry"
"Nah fam just dip em in dawn and let em dry"
đ
soak em in IPA
based
HA true
what kinda work
i feel like hank just washes his truck with brake cleaner
LMAO
Omegalul
I guess it works like optimum no rinse
you pour a cap into a bucket
and then fill the rest with water
I hate ONR
real badasses wash their car with gasoline because if gasoline goes inside the car, it is therefore the only thing that should go outside
ehh
hmmmmmmmmmmmmmmmmmmmmmmmmmmmmm
Just wanted to share this with yall. My previous build had some... technical difficulties.
he was playing CSGO and got awped
I did
I feel like some tension was improperly placed
it looks awesome though
ya know my brother used to use a dining table as a desk, that had ceramic tile as the surface
My gamer rage is kinda bad
I own that table
the way /r/pcmr goes on about tempered glass
i wonder if they assemble their computers on that kinda table
do they play football in the house with a football made out of spark plugs
Hyperx quadcast s
I only got it because its flashy
Pretty sick. And it can be controlled via Open RGB as a music visualizer. I love it lol
That's me messing around with open rgb. Music synced to all rgb. Crazy lightshow
it sounded slightly better than a blue yeti to me, and I'm not paying $400 for a samson SM7b + XLR thingy setup or whatever
or $100 for a cheap xlr and a shitty xlr mic
Agreed. It sounds great
it wouldn't give me anything anyway
I don't have a deep bassy voice
and I sound just fine with this mic đ
Well I don't think I have to worry about my X570 case. The panels hang so there is no pinching etc.
Solid case. Looks neat
Only one thing I am curious on though
Why is there a tempered glass panel in the front? It already has fans and a dust filter.
Seems a little counter intuitive since the fans will either be pulling air in or pushing air out. And the only room to breathe is the gap on the left and right.
Seems like there is the ability to take it off though
That is the trade-off with glass cases. Many of them are built offered with a glass or mesh front face
Honestly this design is fine. There is plenty of gap to suck in air.
True. At least they give you the option to take the front off if you please too
At least that seems to be the case.
I'm sure it hardly makes a difference ive just never seen a case with the front like that before. Overall the aesthetics are nice. How much is it?
Heh, $400 just for the sm7b. Add like 300+ for a good interface ontop of that
yep fuck that
heh another reddit thread on work from home, this time in /r/apple
I love watching people lose their shit over people working from home
they're like I WANT FACE TO FACE SOCIAL INTERACTION!!!!!
Nah dude leave me alone thats what IM is for
yea let's bring back handshakes and eye-to-eye staring contests and people coming in after having food with too much onions and booze
FIRM handshake with a little tug to assert dominance
Yes, I am to break hands
man I hate hand shaking
these days I'll let the other person reach out and not return the gesture haha
Ye
Head nod's good enough bruh
I don't need to touch you to know yoy are a real person
Hello, please tell me what's happening đ
last time I went in for an in-person meeting because we had some out of state visitors
one of the dudes mask was too small and kept falling off his nose
it was so distracting I think I couldn't pay attention half the meeting
sounds like the servers have shit the bed
sorry rantaro i have no idea, maybe someone does >>
lots of people are reporting those issues
yeah definitely not just you
lovely since it got me at the 200ish queue
if you check other channels like #general-discussion and #rants
you'll see many others with that
just a case of waiting, keep trying and eventually they'll fix it
anyone know how to fix it?
most likely
also, got a question, just started playing a few days ago. is it bannable if I use a DPS tracker of some sort?
I have fun feeling artificialy superior.
Same issue, glad it isn't just me
the login or authentication servers have shit the bed I'd say, waiting game
Judging from twitter, happened to a ton of people if not everyone
yep, it's widespread
amazon web services on fire again?
at least we have a christmas server icon now
too soon to be the log4j related at this point
got me a leap 2.. it's so much more comfortable than my uh, GAMER chair
ive also been thanos snapped. RIP.
Hi!
I have a weird error in multiple language when trying to connect. an error has occured. I am alone having this đŚ
Seems like everyone is having this issue, so not just you.
Oo! its a relief then đ i tough i broke my game. just reinstalled windows and all!
Thanks Arkha
sounds like it was fixed try logging on again
Lol what a timing! yes it works đ
not ff14 related but is this supposed to take a long time to start? 
it hasnt done anything for like 15 mins
Anyone else getting super laggy servers?
like at times everything will be a slide show but it only affects me. I've tested my internet and it's not that Im getting perfectly good connection and speeds
https://www.reddit.com/r/pcmasterrace/comments/rga552/i_mean_sure_is_10_fans_overkill_maybe_but_darth/
this looks hella sharp
3,748 votes and 321 comments so far on Reddit
7000D hmm?
How is it
That i literally live in the country where Light DC is being hosted
And I continuously get 90002 disconnects
But when i play on AETHER
ACROSS THE GODDAMN WORLD
I have the most stable fucking connection in the world
What
The fuck
This bothers me so much
My experience on NA is 10times better lmao
Aether is solid for me from UK, have barely ever played on Light though, I did level a character on Odin to 18ish to help my wife invite alts to her FC though and it was fine
Error 2002 While Waiting in Login Queues
In regards to Error 2002 that occurs during login queues, outside of causes related to unstable connections, we have confirmed a bug. This bug was part of a login-related program created back in FFXIV version 1.0, and thanks to the reports and tests carried out by many of our players, we were able to identify the cause of the problem. We apologize for not being able to identify the issue on our end and thank you all for submitting detailed reports regarding this matter.
Although the code for fixing this bug is already prepared, applying the fix will require patching the game client, which will be addressed in Patch 6.01, scheduled for Tuesday, December 21. As this issue occurs while waiting in the queue for a very long time, we considered releasing the patch ahead of schedule, but in the end decided to include it in Patch 6.01, as there is already a lot of new code in the pipeline for the patch and interrupting the process of verifying them may lead to other bugs. We apologize for the inconvenience and ask for your patience a bit longer.
Im not getting 2002
Queues are fine
I get 90002 ingame
So i literally get kicked out of the game with error 90002
That wasn't directed at you, just interesting they've finally acknowledged it, they previously said anyone getting 2002'd in the queue was their own fault
anyone around that can help me with a ui issue?
maybe, best bet it to just ask it and if anyone has a clue they'll tag you
trying to alter the bars in the bottom left and it wont let me get rid of the icons at all. cant find any options and the bars are unlocked not sure whats going on
I think I know why
you need to temporarily switch control method to mouse/kb and then you can unlock/edit those bars
the one thing i didnt try lmao
I had the issue in reverse lol, I wanted to lock some of those extra bars and nothing would do it when on controller input, someone told me switch to mouse/kb and I could lock them, and they stay locked while I'm on controller even if I unlock the wxhb
Welp, dell sure did an oopsie.
New bios released. We installed it. A dozen notebooks now bricked because after you fully turn them off, they simply don't power on anymore unless you remove the battery
Oh sorry xD
hi
I am having trouble doing FTP with the NAS I got last week.
oh.... and I finally got my schedule for work plus a name tag, uniform shirt & ball cap plus a key fob to get into certain places.
that's uh, less than ideal
Yeah especially because we were supposed to deliver said notebooks to the employees today.
Fun workaround to fix it tho: disconnect battery, boot only with power cable, reset time, put battery in again, downgrade bios, remove battery again, boot again and reset time and boom works
effort, but at least you found a way
đŚ
that's lame.
gotta put old BIOS in....
kinda reminds me of firmware on PS3
so many different models and they did one-size-fits-all firmware updates for them instead of giving a choice ....
if your PS3 isn't compatible for some reason, the hard drive or disc drive won't work; breaking the machine.
Wat
If your ps3 is not compatible with the fw itâll tell you and just not update..?
Give me some of those edibles u got
I've never heard of such a thing
yeah I don't think that's a thing
Does this happen to anyone esle im so frustrated
im having issue with the sound its stutering and buzzing i did everything and hasnt worked
@modern iris this may or may not be relevant; https://forum.square-enix.com/ffxiv/threads/447799-Sound-fix-with-dx11
Sound settings>Advanced sound options>App volume and device preferences, (with game open). Alternatively "Sound mixer options" typed up from the start menu
The "Outpout" box i have circled was blank. i changed it to my headset.
This may not work for everyone. i hope this helps somebody. If it works for you please...
I ping Eanae often
she's learned to mostly ignore me
Damn
my 6700k is now my bottleneck
for my 3070 ti
; ;
I've been making a bunch of money working overtme this Holiday Season
BUT
DDR5
is too expensive
Time to get that 5950X on sale 
Only 450 bucks 
I need ddr5 but itâs unavailable everywhere I had some on pre order which was due 10 December now itâs pushed to mid January
how long will the 5950x last me
đŽ
do AMD CPUS
still have
a shit ton of issues
Haven't had then for quite some time now
for gaming/streaming at 4k
can I get away with a 5900x
@deep sapphire should i stay on team blue
D:
Well
Ofc Hank will say Intel is better
It should last for like 4-5 years

Which is 90C during during synthetic workloads
Just like a stock Intel 
sony getting rekt is the best thing ever
Well I OC'd purely just because I didn't want to leave performance on the table
And at the same time my use case will probably never push it to its full capacity cuz all I do is play vidya games and watch youtube

this is pure comedy
Oh yeah, D-Brand is trolling the hell out of Sony.
I think every part of the page for those covers is a shot at Sony in some form or another.
Hardly. The only "issue" I've seen is that they can get a little hot, but proper cooling can easily solve that.
I have the 5800x OC'ed and I get roughly 60-70c under load
Yeah, not sure where the issues are. The Ryzen 3000 and 5000 series were the go to for a while. It even took Intel three generations to outperform without thermal runaway and even then it's avoiding the last part by a small margin.
Hank! Everyone trying to convince me to let go of blue
The 12900k though.. that thing runs even hotter. The power draw is insane.
Hey, you want to go Intel, fine. Just not sure where the misplaced accusations are coming from.
^ Both are doing well at the moment. Can't really make a mistake, team red and team blue have healthy competition.
Lolol
I am. Just messing with you guys
The joke on this discord
Is hank is team blue
I think?
@lost python
Is thst the joke
These are my temps when running a stress test. Changed some curve optimizer settings making sure it's stable
Don't make me link the FX9950 again /s
Meanwhile mine be like
FX9950 was a last-gasp from AMD and their FX line of CPUs after Sledgehammer failed. It brute-forced 5ghz by pushing TDP to 230W
jesus
That was around 2011-2012 at the beginning of AMD's doldrums of irrelevance that ended with Ryzen2 around 2018/19
Where suddenly everyone was an avid AMD fanboy 
When the âand is good but if you want the best for gaming get a 9900k bruhâ crowd was meta
This is also at 220W
I think the 11900K was the worst one bc it was still on 14nm. At least the 12900K is on 10nm now right?
Normal power limits would limit it to 145W iirc
@kindred brook don't forget to ask @deep sapphire what his steam username is
LUL
Also keep in mind that while the 12900K might come close to the 11900K in power draw, it has double the cores on it compared to the 11900K, so it's actually doing a lot better for TDP, it just has a lot more packed onto the die
amdphenomfx
(Yes, the other 8 are "efficiency" but it's not like they are super garbo)
Vaccines are technology right?
I just joined team moderna
Waiting for side effects
Eh it seems like they all vary wildly by person and for no obvious reason
I wanna say pfizer
Because everyone's immune system is a little different. Remember you aren't actually getting sick from them, it's just your immune system jumping on a perceived threat
Should be pretty stronk for a bit
Oh, you got delta strain of covid?
Yeah last month, fucking sucked
I've avoided covid so far afaik, although I've only been tested once last Feb, so maybe i was asympt.
I mean I'm just assuming it was delta, it was massively dominant here
Just think about how much worse it would have sucked with nothing though.
Whatadeal
Would be fine. Or use NVENC but that would cut frames a load
Get da 5950x tho

BUT
12900k
for 550
đŽ
ugh
but DDR5
like 500 bucks
2x16GB sticks for $460 seems like... not too bad?
especially since it's a weird above-jdec spec so you're paying for the frequency premium too


