#technology-discussion
1 messages · Page 106 of 1
Now, sit back and waot for download
I uh. Thank you guys for helping with this.
The past almost 2 months have been. A lot.
At the mean time, I'll recommend to google on "how to liveUSB in chromebook"
Also, have a look at the commands of Mint
ngl I kinda forget which command Mint uses lol
1.1/2.5 GB
Lol that's fast
Have cracked/really fast internet here.
At the meanwhile, heed my instruction
After you created the LiveUSB successfully, plug it onto the desktop (turned off)
Then you turn on the PC
Do NOT wait it to fully boot, smash the hecc outta DEL button
This should boot you to BIOS.
Navigate to the BOOT section, and override the priority (usually 0) to the USB
Save change, restart, it should boot you to the Mint of the Live USB
From that you may have some peek into the disks, and things in general, even being locked, like how many disks and how much it filled with data
Any way to undo those locks?
Yeah ofc
At least having the LiveUSB allows you get used to Mint environment a bit
Ironically, this Chromebook is probably the slowest PC I've ever used.
This should work
The liveUSB is also a requirement anyway
To see if the disks are encrypted or not
If not encrypted, it's easier to work around with that web's instruction
ngl I hope that not encrypted
Imma sleep, if you have issue that google can't give you a precise answer, just ask here and peep will reply
Thank you Viy.
Well, chromebook is linux but heavily restricted, so not surprise ngl
I wish the disks are not encrypted, as I know you can do it 👍
It'll look scary, just stay calm, deep breath, and follow the steps slowly
Question. When I put Linux on this USB, will it wipe everything else on it?
yes, so make sure to not use a usb with important stuff on it
Oh fucking hell I almost used one of Yukari's usbs.
!hank
I guess this will have to wait for another day.
Took screenshots of everything needed.
!hank
!hank
!hank
4 pink haired catgirls in a row 
!hank
!hank
hm is this an odd setting for an ASUS Prime AP201 case? The case itself has all sides being mesh, has no slot for front fan.
it's probably fine
\m/
right lol
perhaps the case will hover. Better to grasp a balloon string just in case 😄
more fans does not in fact mean more better but I guess it’s fine for this
well the case when bought together will reduce the cost of ASUS tripple fan pack by a half (which is already half-discounted). So I can buy two packs for the price of one pack 😄
it looks heavy lol
overkill imo
someone just loves noctua 😛
https://www.techpowerup.com/review/asus-prime-ap201/6.html they tested it with a single rear fan and a CPU cooler
Don't be fooled by the fact that the Asus Prime AP201 is an M-ATX case. In fact, it may well be the reason you end up going for that type of motherboard instead of the classic ATX or ITX options out there. The AP201 manages to impress all around with its simple, yet functional, very balanced interior combined with a clean, beautiful exterior
seems good, but it is 1080. Not sure about 1440p performance
you might be able to ditch the NH-D15 and get away with a better performing liquid cooler at around the same price point
the specs say 3x120mm or 2x140mm at the top so you might be able to use a Liquid Freezer II 280 or 360
it depends on whether I grab a 6750 xt or not. It comes with a 240mm AiO. It would save me money to buy a CPU cooler too
but I still hope for a 6800 xt
the cooler I plan to have is a Peerless Assassins 120, btw
Yeah Peerless Assassin 120 is an excellent choice
Tru tho
hai imp
question, but whats the difference between a 3060 and a 3060ti
TI's faster and has more power under the hood.
are laptop 3060s just as strong as those
No.
Mobile chipsets are limited by power usually
Impala for tech mentor
almost certainly a terrible idea
yes

Nominally, for a 3060ti, if you were using a desktop-style card, max retail TDP is ~200w, 120w for the processor, so you need at least 350w.
If you could even get it in a latop.
*laptop.
I think the biggest laptops atm are still only 250-285-ish.
This is why laptop cards are comically underclocked.
in general if you have a laptop you just use it until it dies
just play games, it's decent enough
Wall adapter on that is 240
You're losing 20w to the screen, 100-ish to the CPU, so you're getting maybe 100-150 to the GPU tops.
So at best you're gonna see 2/3rds the performance of a desktop rig, until it overheats and clocks down further because lollaptops.

yeah just don't even compare it to a desktop
slates a spare machine for shipping to Aeris.
I wish it was that easy to cool any of my machines.
hm
If I go far enough north I'm seriously considering hard-plumbing a 1-2" water-duct /just/ for watercooling.
is it not
Nah, the house's AC unit is slightly undersized.
And when it's 110 outside, we can't dump heat out there.
To properly redo the A/C system for this house is gonna be ~20k or so, which won't be affordable for awhile.
Technically, for the house (2ksqft), the 4 ton unit we've got is enough cooling, but it's not really enough as soon as you remember it's vegas. :D
hmm
im not a HVAC specialist
but
that seems like a lot of space

would it be expensive since youre in vegas
~20k or so for us to upgrade to a 5 ton unit.
any chance you can find a pre-used one
Nah, you wouldn't want one.
whys that
The compressors tend to burn out in 10-15 years.
The secret for working out cooling loads (In the US), is every 500sqft is 1 ton of A/C.
So our 4 ton is "enough" but it's not nearly enough to keep it comfortable.
It'll auctually drop my cooling bill, hilariously enough.
The current system is a 4 ton, 14 seer unit, where seer is a measure of energy efficency.
Per US building code, I'm required, and the home builder was required to put in a 14 seer minimum unit, and they did just that.
A sensible upgrade to an 18 seer unit will drop the power usage by 5-10%
I considered a 20 seer, but that was an unreasonably large sum of money.
how much is that one
Something like 35k.
Yes, yes it is.
It can also be described as 3 replacement engines for my current car.
Which is equally depressing, but at least they'd make me happier. :D
I WISH.
The worst part of being as tall as I am is I'm too tall for pretty much every drift car ;.;
We're gonna have to yoink the seats and drop them to the floorplan when I get my drift-mobile
could start a slammed drift SUV
once i get more monies
There's a spare rotary in the storage unit needing a vehicle to live in.
Ye, wouldn't be hard.
eventually though
i might end up having to swap it for a newer economic engine if the dorito keeps dying
All of my vehicles are owned by a company I hold in Montana to make my life easier. 
Also cheaper for me to register it there than here in NV due to the way we pay our taxes.
Well, registrations.
Google, it's got all the info.
No, NV doesn't have any state taxes, and the company doesn't have any assets other than paid off vehicles with no income.
We don't do the silly stuff like putting a new car on that has to be done w/ bank transfers/etc.

sounds worth living through the heat for it
cali is right there anyways for food
3hr drive?
4 to LA
Not that far, I used to drive an hour to work each way when I lived in Houston.
That was at 2 AM.
😳
I lived in NE Houston and worked in SW.
Rip
So I literally had to cross the city to get to work.
But yeah, catch the 8 or the 610 at the wrong time and you're there for hours.
Yeah whenever I fly I try to time the landing in the dead morning
Just so I’m not sitting in traffic
where's catboys huh
brb writing one
IIRC nekos.best only has 100-150 catboy pics, which is unfortunate, compared to the 1k+ catgirl pics.
I mean, it's systemd.
runs fine in tmux but systemd keeps murdering it because????
When isn't it murdering something?
Tbh, probally a misconfiguration in the service file, like it's thinking it's supposed to stay attached and self-daemonizing or something.
Slap the jourunal around a bit, might show up.
ssh on mobile is pain
especially since my thing I thought exited doesn't
there's prob some long living config thing I didn't set
It probally needs a type or something.
IIRC a non-detatching, non forking is type=exec
It's been awhile and I'm not familiar with that particular service tho
I suppose they get bonus points for having two (2) screen bars 
i kinda want to buy my mom one of those screen bar lights
I have a folder with many many bookmarks (100+). When I scroll down to the area I want and select one and then return to the bookmark folder, my location in the folder has been lost and it starts back at the top. This is a recent and very unwanted change. I often am referring to several bookmarks ...
oh my god all this time I thought I was going crazy
but bookmark folders scrolling back up when you change the page is just a bug in the recent version of Firefox
wish I had the $3500 for the XIV guitar 
That monitor viewing angle tho
omg same
unrelated:
ffxiv is running at 300fps for me right now and my GPU is s c r e a m i n g
i hate coilwhine
LMAO
Thanks ASUS

optimal aoe evasion
This sounds like it actually has an arduino board with it right? Some of the others expected you to buy your own. https://www.amazon.com/OSOYOO-Starter-Beginners-Engineers-Tutorial/dp/B08DHRLJ1N/
looks like it has a $3 clone yes
Well, sure.
Nephew's 10th bday and his dad is an engineer, so I figure the two of them together should be able to get it working
Nephew is also smart for his age in math and such
If he really gets into it, they can always buy a better arduino
it doesn't really matter, clones use the same chip
Sure, but I meant one with like a better processor or more memory or something bc there are different revisions right?
Comes with an uno r3
I basically still use Uno's to this day : P anything past this you kinda use something else, but for hobbyist MCU the uno are fine
You also have the mega
But that too is overkill
Okay. Arduino is something I've wanted to try sometime but never have. Like I wanted to try building my own Claptrap
It's really not too bad
Yeah it's mostly my ADD pulling me in 5 directions at once. Want to still get better at drawing, want to make my own game, want to take the JLPT1 so I should study for that etc. etc.
!hank
Also gmorning team.
$500 for a card that gets shit on by a low end card from 2012 
Linus Tech Tips recently was hacked by a redline infostealer pdf/scr file in a malicious sponsor email. I myself have been receiving a ton of such fake sponsor emails and in this video we look at the attack process. Get Crowdsec for free: https://www.crowdsec.net/?mtm_campaign=PCSecMag-May22 (sponsor)
Buy the best antivirus: https://thepcsecuri...
interesting...
why does windows recognize it as a launchable .scr file, when the file extension is a .pdf
windows has some really stupid logic on mismatched file extensions
i wouldn't have caught it either
oh wait.
hiding extension also hides the extension name in the property menu
it being enabled looks like this
and windows allows you to do dumb things like put file extensions as part of the file name
so yeah, the pdf file when showing, would look like "filname.pdf.scr"
like getfucked.txt.bat
yeah, i just thought the filename extension should have been visible in the properties menu, but nope. in like, the name part
yeah
i keep all my extensions enabled all the time however
dunno why windows have it default off
"user friendliness"
probably boomers getting confused
"why does this file have two . things at the end??"
"just turn it off, I don't like it"
well looks like the fallout of the tik tok debacle will be increased data privacy scrutiny
which will be great
that's all anybody really wanted
although the odds of the US getting a GDPR equivalent are basically zero
you have a better chance of becoming a megaball billionaire
it just took some cold war tension to get the ball rolling but there looks to be very strong support for the ADPPA
any progress here is good
I mean, progress on support is one thing
but getting it past the obstruction junction is another
will never make it into law 
oh, you want this? haha no fuck you struts away to post on twitter
I kinda have one in Virginia
based on the one in california which was based on the gdpr
only two states I know with it though
!hank
LMAO
“I never believed that [crypto] is something that will do something good for humanity. You know, people do crazy things, but they buy your stuff, you sell them stuff. But you don’t redirect the company to support whatever it is.”
let's see what slashdot comments say hahaha
topkek
Can anyone recommend a decent mobile image editing app that allows you to draw on the images you're editing? I keep finding myself having to circle or underline things in pics and screenshots and my phone's default editor has no feature like this. Tried downloading the mobile version of Gimp but it keeps crashing every time I try to load an image.
Discover free and premium online photo editor and animation design tools! Effects, filters, overlays, simple to expert tools.Open almost any image format like PSD (Photoshop), PXD, Jpeg, PNG (Transparent), webP, SVG and many more. You'll find a Pixlr image editor just for you!
hopefully the free version has brushes
it contains ads
Photoshop Express is also ok although that involves adoughbee
photopea.com
is a web based cut down, photoshop, essentially
Danke.
at first glance i thought it was a mazda 6
!hank
hm is anti-sag for GPU important nowadays?
I check around and see a weird stick accessory that looks like something you would put under a car to lift it up 😄
for smaller cards no
for big boy cards like the RTX 4090 it's probably a yes this time
6800 xt and 3080 is smol, no?
small enough to not need them
my question is
can anti-sag be set up anywhere
my PC is inverted so up is down and so on
does it need to latch somewhere that is only down?
gravity pulls things down so as long as you have space to put a pole beneath it
or perhaps you can move your card on slot down and add this beneath it?
why is your PC upside down though?
style :3
smol GTX 750
and lol that is a lot in the box
yea smaller GPUs don't need it
but for bigger GPUs it's nice to have one
my GPU support is built into the case lol
does vertically mount GPU sag?
drink the water
anyone knows why my monitor won't turn on after the 30 mins inactivity that I setup?
They never believed in it ... but they were willing to make multiple crypto-only cards and sell gaming cards to cryptobros to profit off it tho rite /s
Like the PC is on but the monitor won't come out of power saver? You could try googling a solution, but any time I've seen that it's just a weird glitch and you end up having to reboot to fix it. Or does it happen consistently if your monitor goes into powersaver?
just happened 2 times in a row now, never happened before
been happening since I've been doing audio recording for some reason
which shouldn't happen since these plugins won't affect anything graphics
at this point I'm not risking it anymore since when the screen is black, alt+x -> u -> r didn't work for some reason
I'll turn off that power saver mode and just turn off monitor manually 🥲
@modest moss be proud of me, got sent to the hospital jsut in case to get x-rays because I fell off the roof
what the hell did you do till you fell off the roof?
Yeah could be related to that. I want to say I had some issues with my PC using the Schiit Stack and using standby
My friend got a Magnius and Modius so he gave me his old set
grats, ok ty ty for the info, I guess I'll stop this power saving shenanigans
for me it was how the case was designed
I got it like uhh
5-6years ago
back then I was not as knowledgeable as I am today
upside down PC? How does it look like? 🤔
There are a rare handful of cases that do that.
I was concerned at first about gpu holders but I guess I will see in practice
Fractal's Torrent does this as well and doesn't suffer one bit for it
There's so many fans in cases now, it almost doesn't matter where you get the air from and send it out
my RTX 4090 came with an anti-sag bracer in the box, first time I've seen a GPU have that thing included by default
it was mounted into two of the screw holes for mounting the mobo against the case, with separator rings to keep the two away from each other
clever construction, very sturdy and works like a charm
did it need to latch on the bottom of the case?
no, not at all, it's completely agnostic to the actual depth of the case because you mount it onto the ATX screw holes like that
!hank
imo this kind of thing should have been standard for GPUs for a while
even the 1080Ti had a mean sag to it
!hank


!hank
!hank
cute
Windows 8.1 was the best OS Microsoft ever made
I’m serious lmao
8.1 was so snappy and stable
Search actually worked
why were you trying to install a microwave up there?
How dare you
XP is the goat
That's a weird way to spell Server 2000
Was that before or after IBM's magic server pixie dust?
It was about time that IBM invented this PixieDust.
I remember they had similar ones talking about early cloud computing too
@burnt swallow M27 Q-X or M27Q-P are still my recommendations, what are the prices locally?
Sold Out according to Best Buy 
does amazon give you tons of shipping ?
basically
can you get it from amazon
idk how shipping is calculated for hawaii and customs
I have Amazon Prime
Holy fuk... why. How are you supposed to cool that in a 1-2U? I assume you don't? 4U minimum? https://images.hothardware.com/contentimages/newsitem/61246/content/intel-lga7529-lga4677-lga1700-cpu-comparison-harukaze5719.jpg

budget?
I was thinking ~$350 unless that monitor is good enough to justify the cost
the monitor is for gaming correct
240Hz 
Yes
My current 1080p monitor will become my side one for like YT and Discord and stuff
MSI B660 Series Motherboards: https://msi.gm/GetB660Series
MSI ANZ Promotion: https://msi.gm/GetPoweredbyMSI
Support us on Patreon: https://www.patreon.com/hardwareunboxed
Join us on Floatplane: https://www.floatplane.com/channel/HardwareUnboxed
Buy relevant products from Amazon, Newegg and others below:
Gigabyte M27Q X - https://geni.us/0EOLg...
TeamGroup “Evolving Invincibility” Giveaway: https://bit.ly/3HlM0eq
Support us on Patreon: https://www.patreon.com/hardwareunboxed
Join us on Floatplane: https://www.floatplane.com/channel/HardwareUnboxed
Buy relevant products from Amazon, Newegg and others below:
Gigabyte M27Q P - https://geni.us/LWELXZ8
Gigabyte M27Q - https://geni.us/eJxa0...

check out the reviews and see if you like them
tell me your thoughts and I can give you my recommendation
the Q X is 130$ more expensive
so ull have to make a judgment whether or not its worth it based on the reviews
you can also tell me your impressions and I can help you
I’m waiting for the LG C2 to go on a slightly better sale
900 bucks for a 42” OLED 120hz TV with gsync

Grab a GN 'Debug' Coaster Pack on the Store! Use code 'BUTWHY' for 10% off! https://store.gamersnexus.net/products/gn-drink-debug-coaster-pack-4-custom-3d-coasters-100x100mm-4x4 | these 4 drink coasters are each uniquely designed to fit the PC hardware theme and support us directly while getting you something in return.
GN Large Modmats are al...
Lmao he’s totally right the prices have gotten out of control for no reason
Ole mercantilism that bastard
ah yes, way to ruin twitter, Elon
"8$"
I ain't payin' a single cent for him
inb4 "retweeting a post will require 8$"
also advanced AI bot swarms, those are called people Elon, people you pissed off!
they should limit that to 5, make people either pay or go outside
twitter is bad for health
make it so that nobody wants to use twitter
I don't mind Elon driving twitter into the ground
Add all social media to the list, discord's trying to drive itself into the ground.
Lets get them all to augur into the earth at the same time.
"did you try to send a message to r/ffxiv discord? gift a nitro and you will be able to send 10 more messages"
I'd unironically find this hilarious.
nah discord is craftier "you can send this message after watching this quick ad or subscribe to Nitro to able to send messages without ad breaks!"
the game
you could definetly do this with a bot
I mean, yes, I could put it in kupo, and I'd find it hilarious.
And if it'd been considered 2-3 weeks ago, I'd 100% have done it.
Unfortunately, apr fools is only a few days away, so too late to develop and test.
just take a few days off work right now
oh yeah also I haven't seen Elon push doge coin
I don't start the new job until next week.
3 days is just a bit short for something that effects this particular server :P
I think he's now obsessed with AI
it's the new thing now
Always was, he wanted to take control of OpenAI awhile back, then left advisory when he couldn't get it.
oh talking of AI and crypto
He’s been that way for a long while(always talked about the existential threat of ai)
Years now
recently I learned decentraland had a comedy center and one of the things was literally ChatGPT telling jokes
I mean, not surprising. Decentraland was hilariously bad when I looked at the contracts a couple years ago.
well not surprised
whether the project was or wasn't built on crypto the problem here is the concept itself
simply put the idea of "Anywhere anything, any time in a game of everything everywhere all of the time." is just bullshit
Get a 15-day free trial for unlimited backup at https://www.backblaze.com/landing/podcast-ltt.html
Experience fast and seamless remote access using AnyDesk: http://lmg.gg/AnyDesk
CPUs, GPUs, laptops, Macs- everything has a failure rate. Our AMD Ryzen 7950X3D was the victim of the silicon lottery. But there’s more to the story than mere benchma...
This is the most AMD story ever lol
This doesn’t instill a lot of confidence in the 7800X3D then if the major issue seems to come from lower power targets
so uh
TIL
MY SSD IS BENT
it seems, if you tighten the side with that little silver spacer
it pulls the ssd towards the heatsink instead of holding it against the motherboard
the irritating part is looking at the instruction manual, I am doing it the way they said to do it.. -shrug-
If you did it as in the instructions and it caused damage they should replace it
it still works 
Well then
...did you use the wrong standoff
Please stop bending SSDs
it's bent the other way, if you can believe it 
but yea I checked
the problem is the standoff on the heatsink
though looking at that pic, maybe the standoff on the board isn't the right one? hah
if I put the ssd in without the heatsink cover it sits just right
Ngl I think you are doing something wrong
But also, I've seen bending no matter what. So maybe it's fine as it looks relatively...ok
Back off the screw a little bit, it should be fine though/.
imma put the new SSD in the pcie card i bought instead of mounting it on the motherboard
also
that's amusing lol
both of my drives are 1tb..
hwinfo64 lists them correctly at least ^^
i'm not sure i believe the on time for either of my ssds...
SSD SMART stats, are strange sometimes
i have an old M.2 SSD i ripped out of a old Surface Pro, it constantly reports 50C temps, no matter what, NEVER changes
hehe
maybe that's what happened with my first drive
but it's between the cpu and the gpu so maybe it's just toastier there
annoyed me as it would show that constantly as the highest drive temp 😛
so i forced it to show 30 instead
added a -20 offset
The Last of US Steam launch kinda tells me that 32GB RAM and 10GB+ VRAM are kinda a should 🤔
buy a backup then wait it to die
walmart has a pretty dang good price for the one my jeep uses
or at least the one i want to put in
I have so many spare care batteries at this point idk what to do with em all
lol
!hank
Hrm, kupo is disappointing me this evening
kupo being a disappointment just means it’s relatable
ahh yess shiny new ssd
hmm that's weird
oh right i haven't enabled that pcie slot running at 4x yet
i wonder why a smaller pcie multiplier yields higher GT/s
depends on the PCIE generation
that doesn't show the gen, only the lanes
speeds usually double every gen
ah, i think thats more likely communicating the generation, not the actual speed
PCIE 3.0, is 8GT/s, per lane
and PCIE 4.0, is 16GT/s per lane
so assuming thats accurate, its kinda telling you the math for the max GT/s
so first one is 2x 16, so 32
2nd one, is 4x 8 so same, 32, assuming its a 4.0 compatible ssd
It is but the motherboard is a z390 lol
speeds will vary depending on the controllers of course, some controllers are absolute crap
That's a good point though
not only the motherboard controller, IF it uses a extra chip to add more lanes split off from the northbridge i think?
but also the controller on the SSDs themselves
if they have shit Dram cache, or basically none
I'm curious what it'll sya when I tell it to disabke the on board sata and give me x4 on the slot instead lol
the throughput is gonna be trash
hmm yea, z390 is only pcie3.0 compatible from what i can see
which means, running a SSD with less lanes, is gonna be half the speed
This one's a p5+ so it should have decent dram
that Crucial one, would be running half its potential speed
Indeed
I'll fix the slot xonfig tomorrow lol
Then I'll speed test it and see if it performs OK in that slot
well, can you even do anything about it?
with no pcie 4.0 on the mobo?
other than just, it runs slower than it could
Right lol but that's fine
ah, well that model should be a Gen4 x4 lanes
so it showing as 2x doesn't look right to me
Board defaults that slot to x2 but you can make it x4 by disabling the Sata controller
ahhhh ok, now i get it
Yep lol
shared lanes are fun
2TB is nice 🙂
Maybe after the 7800x3d comes out lol
i didn't bother with NVME when i upgraded a year or so ago
I admit some of the 599 7900x deals mixroxentwe has been having have been tempting
just stuck with a SATA M.2, but got a 2TB
They're so cheap now
oh yea, i wanna see the 7800x3d
nice
Made a perfect ssd for using in a USB enclosure
But even the sata ssds are nice and fast
tbh, i dont see much need for NVME speeds
most games can't really utilise it, a regular SSD is damn fast already
but to each their own
most NVME speed is lost on gaming
At this moment in time it's likely cheaper to get nvme
if its not much difference in price, then yea, why not, if its cheaper, no brainer 😄
unfortunately, when i was upgrading, the good NVMEs i could fine, were way more expensive than good SATA SSDs
couldn't really justify the cost
is it a bad idea to have an all-mesh-side case if my have hair-falling disorder? 🤔
not unless it has proper dust filters
Having dust filter is bad? 😄
the dust filter is a good thing
it prevented dust from entering my PC and the inside barely had any dust apart from the fans even tho I hadn't cleaned it in years
dust filters reign supreme
it also depends on your environment
if you are in india then no dust filter can save you
also do not have the pc on top of a carpet
^^^^^^
Also, do you have cat?
yes: get dust filter
no: better get dust filter but kinda optional
I bought a custom crafted wooden thing from a woodcrafter to lift my pc tower cause I have a carpet
https://youtu.be/bEjH775UeNg we need more unhinged rants because I had to forgo a debug LED when I was looking for an AM5 motherboard
Grab a GN 'Debug' Coaster Pack on the Store! Use code 'BUTWHY' for 10% off! https://store.gamersnexus.net/products/gn-drink-debug-coaster-pack-4-custom-3d-coasters-100x100mm-4x4 | these 4 drink coasters are each uniquely designed to fit the PC hardware theme and support us directly while getting you something in return.
GN Large Modmats are al...
I believe this doesn't qualify as "unhinged"
the debug LED should be a standard goddamn feature
Being overclocking is essentially pointless now, these higher end boards have zero reason to exist
!hank
Damn

but my ROG branding
!hank
Ok, a slight pet peeve of mine
I cant permanently turn off my LEDs
I have to launch openrgb
Then load the profile
is there a way to tell if an air purifier really works?
I bought one, but before testing it, I gave it to my mom whose room has a 24/7 dog, so you can expect dog hair everywhere
I keep sneezing in my room recently, so I wonder if it is the dust fault, and if an air purifier can help
!hank
I can’t believe they make a 1400 dollar motherboard
1400 DOLLARS
LIKE WTF
You can buy an air particle meter pretty cheap
first time hearing that 😄
If it’s a HEPA filter it should be certified up to a specific level
Granted HEPA is a US designation so I have no clue if that’s used internationally but yeah
HEPA (, high-efficiency particulate air) filter, also known as high-efficiency particulate absorbing filter and high-efficiency particulate arrestance filter, is an efficiency standard of air filters.Filters meeting the HEPA standard must satisfy certain levels of efficiency. Common standards require that a HEPA air filter must remove—from the a...
what does that mobo do that justifies paying 1400 eddies for it
Literally nothing, it just looks cool rofl
It’s just a way to take advantage of rich people
But hey it’s your money
I use a Sharp J30e-B model with HEPA filter
not sure which grade though
it is a $100 model
fitler is US$10
should last for around 2 year
It should tell you it’s efficiency on the product otherwise you can look it up online to find out what it filters out
IMO 3M are the only ones that make consistently good filters but they are more expensive
it says HEPA H13
also I just discovers auto-mode suck
so I just turn it maximum
for my mom's room
hm
I guess I will borrow the purifier after I clean up my room
to measure dust level before and after two weeks
What are the odds of this happening
!hank
why? We are so close into making skynet
Nah skynet isn't good enough
perhaps at least develop a few M3gan before the halt
Skynet would eradicate human life, a truly intelligent AI would find a way to enslave all of humanity and use it as a gigantic neural network ala old matrix plot style
in any case, if AI isn't used to make a blue cat robot, then it is not worth to pursue 😄
The thing is, when we think about AI going out of control, we always think about skynet, but technically nothing prevents the AI from going the opposite way
Skynet hated humanity, but what about the opposite?
An AI that goes out of control and ends up becoming the biggest yandere in existence
(which, considering current AI responses, isn't far off)
(it already has the gaslighting and emotional dependency parts right)
I guess AI developers should at least add three laws of robots before making free-thinking AI?
TBF we can't apply them ourselves, so unlikely that a human made AI could, assuming it develops human-like intelligence
desolder them 
more recent AI models already come with some manner of controls to prevent them from turning into nazis
that's what went wrong with Nothing Forever, they switched back to an older model and the safeguard failed
i did this 
buy a AP201 with all sides being mesh, but without dust filters
cover these sides with external magnetic dust filters
I wonder if that would be a bad idea 🤔
So, I'm repasting this laptop, and while I'm pretty sure that metallic paste there is the old thermal paste what the hell is the pink stuff
I see
I didn't expect that to be there so I didn't purchase a replacement for that oof
Yeah that's probably the best choice of action
those were thermal pads
but ofc, nothing remained out of them 
judging by the placement. it was for the VRAM
What you gonna use it for
I see 
that looks like some fucked up CPU cooler for some super old platform
It’s just a cold plate for a GPU looks pretty standard to me
It’s pretty standard for most GPUs
@cerulean talon 
You do like your suffering.
My 1050ti’s been chugging along for almost a decade now, so….
¯_(ツ)_/¯
If THAT doesn’t say anything about the gpu market, nothing will
Oyyyy 1050ti goat, still runs fine on custom low-mid setting 
I would have been sad owning a 1050ti 5 years ago let alone today. 
Previous card was a 960

cute
Like ngl I do want upgrade my 1660 OC to something like 3060/ti or whatever rn but tbh kinda a bit too overkill for my current need
I want a powerful gpu to bring out the most out of my 1440p 240hz display
THAT
WITH GOOD COLOR ACCURACY
but in order to get that now I either spend 1200 on a 4080 or 1600 on a 4090
Meh a lot of my clients still run a 1030 rofl
I am cycling them out now for a 1650 tho
Rofl
That said, I went from a GTX 770 to a 1660ti for about 12-18 months before I got the 3080. So depending on the title the 770 probably wasn't much better than the 1050ti
At least 1650 is cheap af and still able to pull games fine
I have 60 ish stockked
and atleast 3/4 of that is already reserved
so its not a big deal really
Huhhhh
Im more concerned about upgrading their CPUs
1650 is a decent 1080p medium settings casual game card
Idk what im going to do about that one
see, someone gets it
Do you run some sort of subscription upgrade process?
All they do is video conference and maybe their kids play some game son it
10 year contractual obligation basically
Kids play the Fortnights on it
Ill upgrade it every 5 years, so 3 swaps
RE4R runs at high settings for me with rain on low at 50-60fps with fsr2 on quality but man, fsr is so shit at upscaling water like holy moly
And mine all the crafts with it
they just pay for upgrades and I charged service upfront
^
O ya Sarah have you heard about a GPU brand name Colorful?
That seems hard to plan 10 years ahead for turning any profit, good luck.
Its pretty big AMD AIB isnt it
Their ITX GPUs are cute
I'm glad I took the time to clean out the fans because turns out the vents were clogged 
Both nvidia and AMD end tho
its one of those asian AIBs
Ya
I think Colorful is pretty middle of the road.
A decent choice for asia market
Well, when I did it I was younger so not very smart. But also I did lower spec systems, so I can just buy them wholesale and make a ton of money flipping the old hardware
It's like buying PNY or Sapphire
And also they scatch the itch of SFF 
the margins arnt that big, but I am making enough that I am not regretting it
Sapphire is surprisingly hard to get in SEA
with how many clients im doing, its just above minimal wage
networked through the community so : D
That said, I've been out of the AMD card market for long enough, I don't really have a good finger on the pulse of who even makes good cards there anymore
the answer is always
then again, budget but decent builds
not MSI
sapphire is pretty good from what I have heard
all Im saying is I will never buy msi anything
the sapphire card for the 7900xtx is named pulse lol
I do not support them at all, wont even touch it if anyone asks me to look at it
Pulse is just a sapphire line same with toxic
It is name Pulse or is it in Pulse grade?
I know I owned at least one Sapphire card and 1-2 Gigabyte ones
Before that was ATI directly or some pre-"nvidia" nvidia stuff like the TNT2
Sapphire pulse is the card name usually
Huhhhhhh
Toxic is sapphires highest end
makes sense given what demographic buys it
Ya Toxic is highest end
It used to be worth it for a toxic but now given aib limitations toxic is just a name
They used to be higher end than the average card of the same model
As it should be
that is their rankings lol
Toxic then nitro then pulse
Pulse being lowest 😭
pulse is their entry level yes
Hey also the cheapest tho
cheapest
I want something that’ll cool well and last like the red devil line from powrcolor
And the nice thing is both Pulse and Nitro has sleek square design no weirdo shroud whatsoever
Ez fit cases
Then......the behemoth of 4090 
I as well, because you don't have to put that stupid ass I-beam under it to combat sag
The sag
ZE SAGGGGG
Isn't you can just make a lego columm to support it anyway? Ez diy tho
not only is the laptop running 10 degrees cooler on idle than before, the fans are also significantly quieter
great success
I suppose ill have to see now whether or not I fucked up the fans while cleaning it and they wont run properly 
Can try replug the fan connector?
Or can search for replacement if u think itz brokey
yeah funnily enough I actually forgot that and was halfway done screwing in the back until I realized I never connected them 
Oh ye don't forget dusting INSIDE the fan, did it to my pal and it's dusty af
oh I dont think it is but its my first time doing something like this so i'm cautious 
Ya be cautious is still better
Then you'll eventually devolve to open laptop like a regular Tuesday 
all this came out from the inside
I had a feeling the vents were blocked but I didn't think it was that bad
HOLY WTF
Ya saw worse tho, and blocked vent can cause temp rise real quick esp for laptop
Yep, I was thermal throttling which is why I decided to open it up, glad I did 
Glad u did 
Now that I've confirmed it works right I'm just gonna screw in the back panel and I'm done 
Welcome to PC/laptop maint 
It's a bit like lego for adult but generally p straightforward

!hank

What are your predictions for the 5 series
Still overly priced?
5080 is still dogshit?
They doubled the price, so 50 series can be 20% less and WHATADEAL... 
Completely overpriced, doubles again, still gonna have people buying it.
If there is a 50 series anytime soon I just hope they do something about the stupid power connector. Happy that my 3080 still uses the old pcie plugs and not that God awful 12vhpwr
The ATX 3.0 connector exists for a reason; its going to be the standard moving forward.
I wish I had paid a bit more attention and bought a PSU with a 12vhpwr connector
I'm torn.
On the one hand I want to build an ITX pc myself; I could keep a few of my own parts and keep the cost down a bit.
On the other hand all the good ITX cases are scarce AF and can't fit the best GPUs.
Or could order the Chronos from Origin. It would be more expensive, but it would come in a good ITX case, and it can fit both a 4080 OR a 7900 XTX since unlike us randos Origin actually has access to the reference models (and some bigger cards).
Gonna disagree with you here, we’re reaching power targets of 450+ watts which is gonna end up requiring 4 8 pin connectors traditionally, that’s just obnoxious
Maybe if they make it have more latching so it doesn't melt
Living with kids means nothing like that is safe
If its not 100 percent in it melts
Ergo kids tampering into gpu death
Not my ideal out come
The amd gpus are able to match 40 series with 2 8 pins so there's definitely an argument to be made
And ray tracing is so small used that its not much lost if you don't get an nvidia gpu
Let's be fair.
The 7900XT and XTX are roughly the 4070Ti and 4080. The 4070 Ti definitely didn't need the 12vHPWR cable but Nvidia just didn't want to bother, so L for Nvidia.
The XTX vs. the 4080 is a weird one because the 7900 XTX actually beats the 4080 for rasterization (raw) output even at 4k with less power....but then is absolutely decimated in Ray Tracing which is where the juice sucking comes from in the 4080 and why it wants the 12vHWPR.
Of course the 4090 is the 4090.
Yeah but so few games ray trace I don't think its fair to really make it an L
Unless you are specifically going out of your way to play those
that four-way adapter for 12vhpwr is annoying as fuck, it takes up so much space
I ordered some components from CableMod to improve the situation, but they don't ship for another two weeks
If you have the psu for it its definitely a lot better to get the direct cable
Honestly I'd just get a new PSU with a 12vHWPR if I were y'all. They still come with regular PCIE cables so it will work with 30 Series/7900 cards
Maybe that new Corsair SHIFT one.
I understand the point of the 12vhpwr, just think its made poorly
Maybe add another set of clamps to verify the things secure
I really wish I had just bought a PSU with a 12vhpwr connector but I wasn't paying attention
The Adapter is pretty bad, but I believe the ones that actually come with one standard are good quality and don't have the adapter issues.
The one that came with my Silverstone is pretty nice, even though I don't need it.
Haven't read into that, huge if true tbh. But then i gotta upgrade psu as well 😔
If you have a Corsair PSU I think they sell a 12vHPWR cable that works with their older PSUs.
Not like my 3080 will need replaced for a bit anyway
Nah I have an evga unfortunately but the price was really good
I feel like my problem with is I like power too much.
Gotta feed this 4k 120FPS monitor somehow. And that requires BIG cards and hot CPUs.
!hank
@cerulean talon purpleish catgirl alert
eh someone explains to me what the USB-type C port for? For charging phone, I already has a fast-charger. For data transfer, my phone doesn't come with a Type C-to-Type C cable. I'm clueless what I am supposed to even do with it
usb type-c is really meant to be a replacement for usb-a
that only macs and phones have made any serious not-half-assed effort to switch, well -shrug-
tbh the usb-c things are starting to get common enough I'm pissed off my monitors don't have usb-c ports 😄
the best/weirdest part about the usb-c connector is it can be powered by a half dozen different usb/thunderbolt controllers so it doesn't guarantee thunderbolt speeds or anything
on a lot of phone connections and a lot of usb-c cables, you can expect usb 2.0(!!) (not 3.1 or 3.2) speeds
<3 Always need more porple.
I use it for USB-C external storage personally, stuff that can really saturate the busses.
!hank
nah need more gray hair girls
I have an nvme ssd in a usb-c enclosure, I just ended up buying a usb-a to usb-c cable for times when I want to plug it into computers that don't have usb-c lol
sadly a cable that supports usb 3.2 speed is $10 >>
gimme :3
what's really disappointing is when I buy a new gadget and it has a micro-b connector
or worse
this awful thing
really I think I hate any usb connector that isn't A or C
the original type B was kinda cool though
2.0 type B looks so goofy but it's even easier to use
but the sockets are terrible on a device that moves around a bit because they WILL break
Don't get me wrong, I love silver-hair, but purple is my fav. :3
!hank
2.0 B can go die, thanks.
Nah, just right.
LOL
that cable is nothing dude
peak sony ericsson
I believe that was the worst phone charger cable I've ever seen
used to has an old iphone 4 and this cable
yea that cable was terrible too, but the ericsson cable was worse
Micro USB is the single worst connector in history
I had the Sony Ericsson that had the folding cover over the keypad. That thing was something
i like how it has spots for 2 fans in the back
I would need to saw off my table for a place to put this :D.
That's actually pretty cool ngl
door is cool
A shame I already spent way too much on my corsair case
gimme if you still have changes
aw dang the sides aren't hinged
i think they screw on
ugh screw on glass panels are the worst
Believe me I get tempted on the kronii hyte y60 way too much...
But I have to stick to this 200 dollar case because of buyers guilt lmao
wish every panel a door!
Problem with the NV7 is it’s massive and the glass isn’t bonded together
Looks cool though I agree
It can be anything, really. USB storage, fast-charging your phone, maybe even USB-C monitor
I thought i need a dedicated fast-charger for fast-charging phone?
No, you just need something that supports higher Volts or Amps
If you look at a wall adapter it usually has several modes on them from 5,9,12,15V and sometimes 20V
The higher the volts it can negotiate a connection for, the faster your charge will be.
And better than a $1 USB-C cable
so it worth investing in type-c to type-c cable for charging? my charger is pretty bulky to lug around
Could get something like this to replace your charger if its a chonker. Otherwise I think there's a 20W one for slightly cheaper as well
The GaN ones (Gallium Nitride) are the newer style that can be a lot smaller than standard charging blocks
that name is as long as an isekai manga title
My portable projector came with a 65W regular Anker USB-C adapter and nice cable, so I've just been using those
(Or the Steam deck adapter heh)
They want to put everything in the title so it ranks higher in search results
hm okay
just makes an AI that manages AI to preventing messing up
"Who is going to watch the Watchers?"
the artist who draws this comic is gonna be replaced by AI soon :3
also, since it is Square Enix: we gonna make a game with GPT!
i think you'll still hvae a market for stuff hand-made by artists
yeah, kinda like handmade baskets
that's probably more common than you'd expect


so like






