#technology-discussion
1 messages · Page 94 of 1
that's no cat
ohh yea
!hank
do full motion capture device deal with your lips movement too 🤔
face tracking
Ah. The lost pettan
Holy shitting shit
Ok
So
My govt makes us do this e-resume shit when applying for a permanent post
After you uploaded ur docs on one website, you have to do it again on another
For "reasons"
JPG or PNG for scanned docs
1MB limit
So basically JPG
Wont recognize pdf
Will fail to upload frequently
Shat the bed when I labelled it "Name Doc" rather than Name_Doc

FFS guys
Pettan pettan tsurupettan
@royal forge that sounds like hell
as a programmer I'd demand a meeting with their CTO and walk in the office with a glove and slap them in the face
Not sure if this is normal for amd gpu i have to manually adjust the fan speeds just to avoid the junc temp going 85C while im gaming.
currently not 80C is the highest while there are many skill effects with other people on my screen.
So i just leave the default fan configuration?
the default fan config is guaranteed to last at least as long as the warranty does 😄
i find it always hit or miss
either default means it runs hot but 'within spec'
or that it gets too damn loud too damn fast
i guess i rather change the gpu fan once its worn out rather than my whole gpu gets cooked with high temp.
Kinda surprised/impressed at the quality of Montech cases for their price class
I used an Air 100 Lite like a couple or so years ago
Surprised how well it holds up
I think it was 2100-2200 PHP when I bought it
I'd just throttle them
!hank
!hank
is it possible that my UPS APC limiting the power that my PC needs during high power usage like gaming?
yeah try power limiting and/or undervolting
if not then you might have to ditch it
i plug my PC now directly to the wall plug just using an extension cable with anti surge.
surge protection? pah!
yes
Omfg
Ok
So
Remember that shitty govt website?
Apparently like.. couple hundred of us managed to ddos it
By uploading our documents
Our 1MB JPGs
lul
is there an upload limit?
I dont fukken know
Oh great
They resized all my docs to a SQUARE
WHAT THE FUCKIN
FUCKIN FUCKING FUCK?????
the shape of evil
bruv, is it normal in Limsa, my 6600xt suddenly spiked to 70c?
you talking regular temp or junction
this is the first time I'm using this riva tuner tracker thing
if you say junction imma smack you 
no, only if I stay in limsa
what's junction? 
the very center of the gpu die, but some people see it as super high and get scared for no reason
oh so it's a normal thing, ok ok
yes, the junction could be 100 and your package temp will be like 80 and it's still fine
that isn't reading junction, that's just package
eh I hate the kind of promotion: build a PC with this CPU + mainboard bonus for cheaper price on CPU. Said mainboard is expensive and makes the price is even more pricey than the non-discounted CPU + another mainboard
gotta get rid of that stock somehow 
it is like selling a horse at 1/10 the price, but you must buy a chicken that is worth 9/10 of horse's original price
it's still a sales tactic that works
hah yeah, have to look the whole package when buying
like I bought CPU, mobo and GPU from different vendor somehow for this reason, lol
cause in 1 store, the CPU is the cheapest, then the GPU and mobo for the said CPU are expensive in the same store 😹
12600k CPU tends to be only on discount if you build PC at their store.
they may even require you build a full set using their parts
at the end, the price is kinda similar between store
ah yeah make sure to read the ToS or description haha
OK RIGHT
RIGHT
D-LINK
YOU'RE AN UNHOLY STUPID FUCKING MESS
FUCK YOU
this fucking d-link mesh bollocks is doing my head in
lmao D-Link
so get this
my landlady gets us broadband
cool
we get one of em d-link house mesh shit
supposed to increase the range of your wifi network
"""seamlessly switch"""
but the thing is
this fucking router
the ""secondary"" router likes to connect to the 5Ghz wifi
i THINK
as a way to, i dunoe, get better speed i guess?
but for some reason
the 5Ghz network
wont work
So i cant figure out if this is because the 5Ghz wifi is borked or the router is borked
and all the videos I find are literally just "press this button to set it all up hyuk hyuk hyuk"
which is obviously used by the ISP technicians too
5Ghz has lower range
and try to see if the current 5ghz band isn't overlapping with everyone else
if there is many
but if it IS overlapping, what can I do?
you change to a different band
Genuinely dont know if im accessing the secondary router or the primary one
https://play.google.com/store/apps/details?id=com.farproc.wifi.analyzer
is a nice app to use for measuring
make sure these blobs don't join
you can change the channels in the router settings
so, as long as there is an open spot, then it is good
just need to find the damned button SOMEWHERE
button?
basically the settings
i found it, but for some reason, there's two of the 5Ghz wifis detected
so
THAT's fun
Right
Im just.. gonna ignore the 5Ghz
Im just tryin to figure out how to tell the router THAT
is there a way to pull a cmd ping into a graph or something?
as in a -t ping
i'd like to check if my router is shittin the bed or not.
so I wanna keep my pc pinging all night to see if the fucker is working or not
theoretically yes,
easily, and simply? never heard of anyone doing that
i just need something to constantly monitor my internet connection tbh
it doesnt even need to ping constantly
i just need to make sure the damned thing is not dropping
google,. is your friend
i dont necessarily endorse this, but it looks simple as fuck at least
it will log output to a text file, and date/timestamp it
Ah yea, i found that
but i also happened to have found netUpTimeMonitor
which pings google and cloudflare simultaneously
so it's a bit more useful
and it's dead simple
!hank
cpu?
motherboard?
do you actually need 32 gigs of ram?
but yea what platform are you on with what CPU and what motherboard
Like if you arnt filling 16 you won't really feel a difference
12700k
isn't it 1600mhz x 2
am I sleepy reading lol
its not like ddr4 is going anywhere
in the near future with the popularity of older platforms
so
you can always get that in the future if you need more ram and do not want to change your cpu
Alright
Y'all enjoy scsi replacement hardware?
Like DDR5 is a bit uhhhhh ok I guess atm but the price is OOMPH
Where u got le CRT tho
DDR5 will finally start to improve now that AM5 isn't dragging PCs back to 2012
my AM4 takes athlon 64 and zen 2 CPUs, what a steal
AM4 boards came out when tamagotchis were cool
!hank
!hank
Nyaa
keqing hm
gapekeep
!hank
I love how not only is the default action for Teams not to Fit to Window for an image thumbnail you open in Teams. But they don't even have a button for Fit to Window like literally every other image software out there.
you look like steve ballmer irl I bet
!hank

yep
Even more ironic: Windows Photos app fits to window by default and has a button for it
I think Teams is truly awful.
in day-to-day use it works well enough to communicate with the team at work, but having gotten a whiff of the architecture before, holy moly, that thing shouldn't even work. IDK how it works.
iirc, in the backend every single message is stored in some weird exchange format with.. probably way more metadata than the largest message anyone would bother to send
if you ever try to use the web version and then open the inspector on the chat window, there's a gazillion elements for every message
it's basically "enterprise java hello world" on crack
you could go on a limb and say something like "it's discord but with microsoft exchange as the backend, and an almost neurotic amount of sysadmin controls and permissions baked into it"
I'd snip it in pieces then merge later
i am steve
so that's how you can afford a 4090
tfw you interview someone that sounds good on paper but the interview goes horrible
Expert in everything. Ph.D in everything.
PhDeez nuts
!hank

Memorable quote of Lawrence in the cult movie Space Office
Hahahahahaha
fuckin a!
https://www.youtube.com/watch?v=bflZYG5DWPg "The GN curse continues"
Until 2/27/23, we're donating 10% of GN store revenue to the Kramden Institute - grab an item here: https://store.gamersnexus.net/ (Kramden Institute is a local-to-us e-waste recycling and technology education facility. We love working with them and have a lot of respect for what they do for this industry. If you'd prefer to donate directly to t...
tech discussion turn into weeb posting
Keep cool with the O11 Dynamic series all-new design and express the preferable configuration. REVERSIBLE CHASSIS MESH PANEL INTEGRATION FLEXIBLE CONFIGURATION OPTIMIZE COOLING SUPPORT 9 DRIVES CAPACITY CABLE MANAGEMENT FRIENDLY 5 OPTIONAL ACCESSORIES GERMAN ENGINEERED https://youtu.be/lzD3F1nQsuQ BUILD WITH THE FINEST MATERIALS THE MODERN BLACK...
this case looks cool. Can change glass panel side :3
285mm though. my PC space's width is like 30mm
Lian li is amazing for cases tho.
mhm
https://lian-li.com/product/pc-o11-dynamic/ this one is smaller. No side panel swiching, but smaller regardless
Space optimization chassis, The O11 DYNAMIC is the combination of modern design and art. Through years of researching, collecting feedback and redesigning; We have successfully craft the best edition of the dual chamber chassis. Experience the full view seamless front and side tempered glasses like a show room. The two bolt on the steel pieces a...
debating this and the evo above. My 300mm space would fit both of them, though the evo will leave little room to wiggle
since my PC is under my feet, I won't see its left glass side most of the time. But if the glass side is on the right, it will show toward the room's door :3
Well this is a fun revelation and not for any good reason
I emailed Be Quiet! about an RMA and found out that they already shipped out the replacement product to the Philippines. And it’s been at the post office for… three weeks.
Without any notification from the post office themselves.
Me not being happy is a huge understatement.
did you get the thing yet?
No because today is a public holiday
Which was announced completely out of nowhere yesterday.
what kind of public holiday that sudden makes an entrance like that?
does this dude EVER have anything good to say about anything? XD
I mean
I agree with the notion that a lot of the gaming pc things are kinda scammy ripoffs
I think there were two prebuilts that were actually pretty good
lol 12 ml120s
totally overkill, agreed
as for the fan curves
hard to expect them to do a custom curve, and corsair's software is too aggressive with fans by default
they weren’t spinning at the same range either
LOL
also the paitn job is lame and
wtf how did they mount that res.. oh it was screwed in properly nvm
the cable management looks amazing
sounds about right for corsair controllers without custom fan curves hahaa
yea that attention to detail is crap
I like how it’s a $2610 premium over retail
huuuge ripoff
what a lame new feature, discord..
man that packaging lmao
alsof or $6600
they could at least include a proper k70
that appears to be a k60?
K55
that was the cost limitation for this great product (using a k70 would have cost the CTO his porsche bonus)
shue is willing to pay this price i bet
it adds, ahem, depth and interesting color, instead of just being pink
the only thing I like is the cable management
no bloatware was good
LMAO
the cable management door thing doesn't close all the way
seems like a bad design
too thick
im really impressed they got this up to $6000.. or almost 7k really
and chose such a large, unnecessary case (For extra $$) and then did the ugliest custom loon on earth
and to top it off it has a BEASTLY 850w
ML fans are the best corsair fans, fite me
but on a rig that I presume people would buy to be flashy and show off?
why are they not using QLs?
egh
corsair's rgb strips are the worst ;_;
WAIT
HOL UP
WHAT?!
WHAT THE FUCK DUDE
argh
I'm angry now ;D
we should count ourselves as lucky that such a belevolent corporation such as corsair is offering a great deal
wait is this an origin product that uses corsair or some kind of collab
Corsair owns Origin
most certainly unsurprising to see an origin product that is mega overpriced but damn corsair, you really never miss huh
I would never
oh god that's so toxic
can I disable super reacts somehow
feature gets rolled out first then a toggle later
with it being like
a nitro thing, I doubht itll be a toggle
like the holiday pfp borders
you gotta mouse over it too what's the point
developers scrambling to get something on the "new feature" kanban done
it plays the most recent one when I swap channels
does nuffin for me if I do that
so I just have to block anyone who super reacts to me
U wouldnt shue
thats all 5 used and i cannot possibly think of a scenario other than doing it for nonsense particle effects
Brigading server announcements is what imma use it for
doesn't display anything on android yet, but i cant wait til just lights up the whole screen
Lol
spam so much that it freezes the app
Exactly
what happens if u put 2 super reacts onto 1 message
Oh nooo
When gif emotes first came out, god server announcements crashed mobile phones
That sound hella annoying
Imagine this now
Lucid Says It Solved Production, But Now Comes the Hard Part
"Too few people are aware" of the brand, CEO Peter Rawlinson remarked after the company's share price fell 10 percent due to an underwhelming fourth quarter.
I mean the cars cost >$100k. nobody's going to care about the brand
also, gm is stopping production at their truck plants because apparently they have a surplus of inventory now
this will be unplayable on an average rig lol
average (hollywood ver.)
Wtf are these super reacts. I hate it.
they're great until hank removes them from the message making it useless
they are terrible and I want them to die
Accessibility > uncheck play animated emojis, apparently
That didn't work
fu discord
I can guess
literally on the discord support page how to do that, but it didn't work
maybe I need to restart clien
t
Super Reactions is currently in Beta and only available to a subset of Discord servers.
Sometimes an emoji is worth a thousand words. Instead of typing out your response to the age-old coffee vs. t...
nope, guess that's out of date
Until 2/27/23, we're donating 10% of GN store revenue to the Kramden Institute - grab an item here: https://store.gamersnexus.net/ (Kramden Institute is a local-to-us e-waste recycling and technology education facility. We love working with them and have a lot of respect for what they do for this industry. If you'd prefer to donate directly to t...
ohh boy
bestoweth upon you a title we will
nhadala the fashionably late
I can feel it chugging
Iz dat UE?
NAISU
Hol up, Quixel assets or custom assets? I just woke up, didn't see it clearly
Oof spicy but ok
per-hair shadowing on your miqote ears
you know, they should sell mosquito catching PC case
I would buy them in a heart beat
could just include dust filters
mobo that generates sound to lure mosquito, dust filter that catch mosquitoes
or just get one of those jet turbine fans that draw a metric fuckton of air
Recensione delle nuove ventole Scythe Gentle typhoon da 3000 e 5400rpm.
Full review: http://www.coolingtechnique.com/recensioni/74-ventole-rheobus/764-recensione-scythe-gentle-typhoon-high-rpm.html
I thought my fans are roaring for a second 😄
turn out I press the play button by mistake
I like how this review (and multiple others) validates the whole DIY elitism thing because of legitimately good prebuilts being basically unicorns
To be clear, I would like to get away with buying a prebuilt for someone else if I feel lazy
But unforunately I (and many others in this channel) am the family and friends tech support
me too
except I have not built anything myself yet, I paid 20$ to have someone else do it for me
but I am planning on installing the new cpu and cooler myself next time
to start somewhere
8 intake and 4 exhaust is completely and utterly pointless too, like what the hell
I have four intake and one exhaust, and the back of my case is punched with holes so there’s still a lot of air going out
more fans still does not equal more better
shop prebuilt in my place is a good way to dump inventory 😛
there’s two 180mms blasting my GPU with air so it’s nice and cool even at high loads
plan to get an corsair airflow 4000f (every reviewer's fav!) with a 360mm front AiO and 1 exhaust top 1 exhaust rear 🤔
getting a flashy AiO is only slightly more expensive than getting flashy fans (4000f don't have flashy stock fans) and a flashy air cooler
just make sure your radiator is mounted tubes down
https://i.imgur.com/qigCnv5.png like this?
the correct orientations are either top-mounted or front-mounted, tubes down because of how gravity works
Gravity - Deals unaspected damage with a potency of 120 to target and all enemies nearby it.
if the tubes are up then it will cause bubbling/gurgling noises at best, and an early RMA when it’s working fine at worst
so you want the natural laws of physics to work in a way so that air is at the top of the radiator and there’s virtually none going into the pump block
if you mount the radiator at the bottom of the case then that’s just early cooler death
hm I will pay attention
A lot of PC builds online (including manufacturer photos & NR200P builds) incorrectly mount AIO liquid coolers, leading to pump noise/whine and early cooler failure.
Sponsor: Buy Thermal Grizzly Conductonaut on Amazon (https://geni.us/1D8Eeq) or Hydronaut paste (https://geni.us/Fsray)
FOLLOW-UP answering common questions from the comments in th...
I kept pestering Azul to mount his radiator tubes down for a while now
he finally did
yes tubes up is more aesthetically pleasing but it just makes noise
well my case is under the desk so asthetic is kinda hard to see 😄
I kinda adore Dynamic Evo cuz I can reserve the build outward, but it is a tad big
my space is 300mm width, and I worry that it may be wider than 285mm like it claims
nvm it is 330mm XD
strange, it grows for some reason
lol
the front mount with the hoses up is fine. the bottom mount is bad
yeah front mount with hoses up is fine but not optimal
is it better to mount it with the hoses down? sure fine
but if it's already built? don't bother
if it's a stress to make it work? don't bother
I did say it makes noise at best and may result in an early RMA when it perfectly works fine at worst
but yeah if you don't care about noise and just want a system that runs then tubes up is fine
Hey guys got a question for those who play with an MMO mouse
I currently have a Naga X that I've been using for around half a year? It's been doing the job pretty well ngl
but I've been looking for a mouse that's a bit smaller? The naga x is pretty bulky and makes it somewhat of a pain after a long session. Are there any alternatives worth looking at/have good quality
I dunno how small the G600 is in relation to the Naga X
okay it's a pretty large mouse compared to the Naga X, nvm
RIP
I guess this is not smaller
no its even bigger than the g600

but yea the steelseries aerox 9 is a good MMO mouse
just cut it in half for a cheaper zaunkoenig
!hank
!hank
Is a Piece of Shiiittttt
Try looking at the corsair or evga mmo mice
One of them has a fairly small model
!hank
Nyaa
2000 years old cat girl
Holy shit dlink
The only way I can configure the wifi is by using a fuckin app, but if the wifi is fucked you cant connect to the modem to configure it?????
What kinda gigabrain strat is THAT
!hank
Nice
rip dlink
used to be good
can you get asus in your country?
just get those unifi 6 wifi
my new router has some sort of wifi-boost feature and now this fucking thing is strong enough that i still have a wifi connection on my phone when i am at the restaurant on the other side of the street, and its a 6 lane street
its called having a really good antenna, and potentially violating radio output limit regulations 😛
welp, not my fault, its what the ISP gave me 
I believe the emissions limitations are based on the geometry of the antenna lobe
most people dont set the actual country code in their router, since different countries have regulations about radios.
E.g in Aus, we're not allowed certain frequencies used by Wifi 5Ghz, over 1 amp power in outdoors areas, i think (i would look it up but i cbf)
and other countries this isn't a thing, so many routers we get here aren't set for Aus limits 😛
for omnidirectional emitters, yeah, the emissions have to be fairly low, but the wifi boost things give them directionality (which also extends their range) if I recall
eh, who the fuck cares, no one is gonna go hunt you down and fine you unless you do something insanely stupid like run a pirate radio station or some shit
yeah
as long as you don't disrupt something that an officiating body uses, nobody will know lmao
the only time they'll come for you is if you build a wifi or cell jammer
that being said, id have LOVED to hunt down and report to the police someone who decided to continually broadcast disconnects at one of my client sites for all wifi devices
thats most definitely not legal
what frequency is your wifi set to?
wifi like many technologies, wasn't properly designed with security in mind
some microwaves aren't insulated very well and they're set to the right frequency to kill the wireless when they're turned on 
and you can Easily send out broadcasts to ALL wifi devices in your area and just, tell them to Disconnect from their current network
with the right hardware
you have logs of a disconnect command being sent?
nah, not possible, all youll see anyway is a Mac address
so wifi has what are called "management frames" which are instructions on things like, disconnect from current Access point, for example
for roaming from wifi ap to wifi ap
BUT that was never built to be secure until recent times
like 4-6 years, "recent"
but so many devices never used it, or it was badly implemented
it wasn't built in as a required thing in the wifi specs
so lots of companies just, ignored it or didn't implement it properly
I had a client where someone was doing this, broadcasting disconnects, constantly for their main office
and there was quite literally nothing we can do about it
why though? was he just bored?
except, implement PMF "Protected Management frames"
which meant, a bunch of their laptops would just have to be flat out replaced
because they wouldn't work with that turned on
even thou the standard was like 4 years old by then
and you can even check waht wifi chipsets support it
i even had one where i KNEW for a fact it was supported, but just didn't work at all
the manufacturer just didn't understand, and wouldn't accept it as an issue, so we just had to remove the laotop and try another model
one asshole, caused a company to have to spend tens of thousands of dollars
to replace equipment
probably not implemented at the firmware level, even if the hardware could support it
sounds like someone who knew that the company would never approve new hardware without a reason, so they purposefully DDOSed their network in an innocent way to force their hand
so not tooo surprising considering their kinda business
if i said who they were, you would find videos covering their dodgy business practices online
my company had fucking windows 7 PCs on the open network until november 2022
lol, yikes
when they got hit with ransomware, it was literally through a windows 7 PC
I emailed them in 2020 and 2021 being like "hey, you should take these off the network and buy new hardware, these aren't being secured anymore"
crickets until the entire network got deepfucked
im currently sorting out a decommission of a SBS 2008 server,
first time i logged into it, i got flashbacks 😛
company is defunct, but the server, is exposed to the web
on RDP
so would be getting login attempts constantly from hackers

my company uses a handful of remote desktop softwares to do remote service sessions
the post-mortem on the ransomware strike is that one of those softwares got exploited and the attacker used their newfound unmonitored access to escalate to admin privileges and just comb the network
they continue to use the software believed to be the cause of the intrusion because they don't want to pay for a license for like, teamviewer 
good old infiltrate, establish permanence, lateral movement, then privesc
yep
people are dumb, management are dumb, even the fucking IT manager is dumb
had a client almost go bankrupt, VERY public company, most people around here would know them by name
and it was because, they got ransomwared
and they got in, using the IT managers domain admin creds
funny thing is, I stumbled across their infiltration the night before
i found something suspicious on their hypervisoor hosts
yeah, every PC has the admin credentials stored on it because that's how they set up each PC (using the admin account and then locking out everyone else to peasant level)
even got the ops manager invoolved, my bosses boss, etc
we got it "cleaned out" but obviously they had permanence somewhere else
i got a call at like 3am
from the oncall engineer
going "hey, uhh, i got an alert for all of X company's servers from our monitoring tool"
"monitoring says Antivirus is missing entirely".....
whelp
i checked, servers were smashing CPU
the hackers, just RDP back in and started encrypting servers manually
to be totally honest, I don't see why a corporate office needs network access outside business hours
server farms, sure, but general workstations and internal storage? no outside network before 0800 and after 1800
i still vividly remember, on the phone with him, my brain slowly catching up.
i sat there in silence for quite literally 30 seconds while i pieced it together, from the night before, and what hed said.
and said "yeah, they're fucked"
"they just got fucked, call the ops manager NOW"
i even jumped on a server, and found the hackers still messing with it, locked them out and told them to fuck off
we were literally fighting for the mouse
was kinda surreal tbh

damage was done thou
oh, best part.... WE had migrated 90% of the company systems to our private cloud
which had immutable backups
SOO company was saved, they were down for a while, and lost some legacy stuff still on-prem
but we just rolled everything back
however 3 months prior, ALL their data was on-prem
and their old backups were also encrypted
i aint spending the money for my landlord to benefit
the company would literally be DEAD right now and have declared bankrupcy
it's your router, take that shit with you when you leave lmao
the ISP provides the router
hmmm yes and no, if the router is fairly cheap from teh ISP, or costs nothing, and you bork it
they can charge you for a new one.
i've basically accepted that unless im in the capital city
you don't require to use the isp's router, only if you want remote support
it REALLY depends on the agreement, there are circumstances where no, you get no say, unfortunately, they are rare, but if its a building agreement, they usually arent lenient
my favorite service call was when I called my ISP because their network was fucking up, and they asked me to take my PC off the router to directly connect to the modem
"can't do that, security policy" "well, it's your router, can't help you" click
I always use my own router
why i like my ISP, i can use anything, and their tech support will help you with any config/issues as best they can if you do use your own hardware, within reason
the only reason my girlfriend's network is so rudimentary is because I know we're moving from that apartment and I don't care to turn it into a digital fortress
when I have a permanent base of operations it's getting a proper hardware pass
no more SSID broadcasting, MAC lockouts, a real security key for the wireless
our 'kind of local' isp got bought by a large isp, and every single service call is convoluted and feels like there is only a single person managing it.
cause the isp lines and the contracts still has to be within the different branch to work
i helped run a small ISP from its humble beginnings.
made me appreciate how fucking shit the industry is and even the support people WE, as partners and resellers had to deal with, were fucking idiots
i started pre-empting support calls with EXACTLY what i wanted them to do, as they would half ass it
you should buy a house and live in it with your gf
oh wait...
Easy installation guide to FibreHome Wi-Fi 6 Router & Mesh for 3X faster internet speed!
Subscribe to our YouTube unifi and follow us on social media for more updates:
Facebook: https://www.facebook.com/weareunifi
Instagram: https://www.instagram.com/unifi
Twitter: https://twitter.com/unifi
Right
Ok
look at the vid 30 seconds in
you just press WPS to link it eh?
2 minutes to link eh?
totally not 30 minutes and this shit still blinking???
Then 1 month later they have THIS one
Easy installation guide for D-Link Wi-Fi 6 Router & Mesh for faster internet speed!
Subscribe to our YouTube unifi and follow us on social media for more updates:
Facebook : https://www.facebook.com/weareunifi
Instagram: https://www.instagram.com/unifi/
Twitter: https://twitter.com/unifi
#DigitalMalaysia #Jendela
and both dont work
so
i dont
i dont fucking know
it's just...
me > "ok, i want the technician who goes out to check the fibre line ALL the way to the MDF, at the premesis, you got that?"
indian all center person > "yes"
next day, "so the technician said there was no issue with the line"
me > "ok did they test ot the MDF?"
them > "no, they tested to the pit"
me > trying to not have an aneurysm "......., can you send them out again and have them check as i asked originally please?"
them > "but they said there was no issue"
me > "send them out and TELL them Exactly what i say here please"
next day "ok the technician found an issue and says its fixed, can you please test and let us know"
me > NO FUCKING SHIT
this happened, a LOT
WPS is trash in my experience
it IS horrendous
it's a clown show
i tried disabling the 5Ghz wifi cuz it was fucking everything up
it's a great idea, but I find it really hit and miss
but it managed to bring down the whole connection. 2.4 and 5
i just flat out disable wps, its garbage
can you not set it to run the 2.4 and 5 with different access names?
i swear to god. whoever designed this
like
HALF YOUR SETTINGS CANNOT BE ACCESSED VIA THE ETHERNET CABLE????
i have 2.4 and 5 on different SSID names, different passwords
i did. But it still shits the bed
what? that sounds, fucking dumb
OK, so get this
the ONLY WAY I CAN TURN OFF WIFI CONNECTION IS IF I CONNECT TO THE WIFI WITH A PHONE APP
WHICH IS BASICALLY JUST A FUCKING BROWSER
lol I was about to say connect to it via cable and set it up that way, that's what I'm expecting to do next week
oh, ohhh, its entirely garbage, gotcha
AND IF I DISABLE IT, THE QUESTION BECOMES, HOW THE FUCK DO I TURN IT BACK ON
my condolences
where in the error does it say that
and they tell me the technician will help
yeah this is what I meant, just with the right words 
i know the fuckers are watching the same fucking tutorials I watched
and have no clue wtf is happening
and D-link aint the only one
TP-link does this shit too
access your wifi settings via app
all good, i was just saying that i do that on mine, it works quite well
be strong Aoi, soon you will be a specialist and have your own place where you can get actual working stuff
god, i hope so
badly designed equipment.... hurts my soul
hm white or black case? :shy:
i'll throw down hard cash for 1GB internet speeds
do you like, light mode or dark mode 😛
I like a disco PC case that spins its RGB light and drive my roommate crazy XD
satan
but since everything I has are black (mouse, keyboard...), I guess black then
too bad some case I want only have white version
in the shop I pick PC parts for the build
though honestly, I prefer dark grey more. Like the hair color in my profile 😛
but those case colors are damn rare
TPlink says hi! Their consumer Omada stuff is the same way: Literally no options unless you use the phone app, and even then it's like a fraction of the options you would expect from a router
RIGHT
ok
so
onward
to saga part 2
i had like 2 bars for my wifi
i put both routers next to each other and connected em via LAN
now im getting max reception
????????
Interference I guess? Because it probably freed up some of the bandwidth it was using from being a repeater now that it was connected by lan
Or maybe they weren't properly repeating. I forget if those want to be on the same wifi channel or different.
The heck 😦
Isn’t their Omaha stuff supposed to be like ubiquity unifi?
It's why I ended up buying an ubiquiti edge router as well: My parents don't need more features, but the fact I can't even do port forwarding with it is annoying. So I have the edge router then the TPlink mesh in AP mode
Speaking of which, I need to plan for replacing the cat5 in their house with cat6 and put it in a proper conduit this time.
in my experience, those potato wifi routers work better as APs
once you take the load off of them for routing, suddenly they're actually kinda reliable
I use their ap, the controller sits on an rpi
But for routing? ERX
I just saw GN's newest prebuilt review
How the hell can you justify selling someone a $6,000 computer with A 3080 in it?!
because they paid $2500 for it a year ago
therefore
Like I just did the math and my entire build with way better parts is only $3,450.
So even if we add a custom loop from Corsair (which are like $800-$900) we're looking at like $4,400 max.
Where the fuck did that $1,600 come from?
theoretically, labor
theoretically
also overhead, shipping (since I doubt that crate/pallet shipping is cheap)
shit, wish I got paid $200 an hour to build PCs 
if it was the only pc you built all month?
Why would you let your GPU do 800 FPS in the first place?
Just cap FPS at your monitor's refresh rate + a little more to save the poor thing the effort.
Yeah, but it doesn't make up for the difference.
For $6,000 they got;
Corsair 7000D Case
Corsair 850w PSU
MSI B550 MB
1TB Storage?
5800x3D CPU
Corsair Vengeance 32GB DDR4 RAM
3080 Founder's Edition
Corsair Custom Loop w/12 non-RGB Fans
Meanwhile for $3,450 I built;
NZXT H7 Flow Case
Silverstone 850w ATX3.0 PSU
ASUS TUF Z690 MB
i7 13700KF CPU
2.5GB NvME Storage
Corsair Dominator 32GB RAM 5200mhz
ASUS TUF 4080 OC Edition
Arctic Liquid Freezer II AIO + 4 Fans
For $2,600 less I somehow built a computer that kicks a $6,000 computer in the teeth. How TF does labor count for that when they have the manufacturer discount too?
I don't understand
Also 6k$ with FLIPPIN B550??????
SCUZE ME?
Unless shipping and then the whole insurance stuff idk but then again still not make any sense
does that include the three PCs you destroyed in the interim
Does the $7500 include the monitors and stuff though?
I mean have a 4k/120 OLED monitor but that still only brings the total up to $5,000.
to be totally honest, 4k/120 or /144 isn't there for me yet
Iz dat Moonlander keeb?
maybe the 5000 series GPUs can get 4k/144 without going back to games released in 2007
i'm not disagreeing with ya at all ^^
?
My 4080 gets 100-120FPS in most modern games at 4k + Ultra Settings, and still gets like 70 if I'm feeling insane and turn on Raytracing, or 80-90FPS if I do RT + DLSS.
I think if you count up everything it comes to like $5,600 for my entire setup.
So for $400 less than that prebuilt I get a complete setup that blows it out of the water. Make it seem like an even WORSE deal.
oh yeah, well, I meant with raytracing because why spend $1800 on hardware just to leave its signature feature disabled
so pretty 😄
See the prebuilt we're talking about was $6,000 for just the PC.
So you built a tricked out PC and got all the stuff needed to use it for only $1,500 more.
My own PC that crushes the prebuilt + all my stuff is only like $5,600. So for $400 less I get a complete superior package.
I mean, I guess the value of your PC went up then. Since you got one of the last EVGA 3090s.
but hank will spend $7500 on a chevy engine
you forgot the cheap paint job
LS junkyard motors are 600 bucks

Look at that
500 bucks nice LQ4 block
Comes with harness and accessories
Slap a 500 dollar 4L80E transmission behind it and a 60 dollar stage 2 can you got yourself a 500 hp machine!
words and acronyms spotted
i love technology 
Plllleeeeaaase be good
I'll offer you 3 cents and a Taco Bell bean burrito
I bet it tastes like shit
nope tastes just like ultra

getting drunk in a hyundai
sounds like a rap bar
sounds like a 90s amusement ride


wtf is this
bidorocchi the rock

its ok we know u wouldnt have good taste
that's fine 
is this all the same anime???
nah, i don't think i will
bro only watches sword art online reruns
ewww sao is trash
how hard yall reckon it is to make your own waterblock
the fins for the 'heatsink' inside there are really really tiny
in that case!
I mean more so the CAD portion and engineering theory
not that hard, i'd say it's more of finding an optimal design
probs not that difficult
might make my own in that case lol
!hank
I wanna cool the power delivery area on my mobo along with the CPU
i imagine it's still a lot more expensive to design your own block than to just buy one
just get a monoblock
they're easy to find
theres my reason bidori
Plus its fun
might be hilarious to cool the ram while im at it
time+money doesn't make it worth it 😭
: P this is why i went into engineering lol
the thing is though you're using things people 99% chance have already designed this stuff for
😭
Not like imma sell it or anything
I have a ton of projects that purely serve to teach me things
is bidori still complaining about his temps
In mathematics and physics, the heat equation is a certain partial differential equation. Solutions of the heat equation are sometimes known as caloric functions. The theory of the heat equation was first developed by Joseph Fourier in 1822 for the purpose of modeling how a quantity such as heat diffuses through a given region.
As the prototypic...
ENGINEERING YEAH
mmmm what if I built the pump and res directly into the block....
seperate chambers of course but hmmm
DING DING DING
🤓

https://www.guru3d.com/news-story/amd-ryzen-9-7950x3d-is-6-faster-in-gaming-than-core-i9-13900k.html I like how Shadowbringers and Endwalker are counted separately
we'll see
it's likely just like last time where it can amount to almost nothing and get massive gains in other areas
for ffxiv it will probably be great
what really matters is how the 7800x3d performs since a lot will be going for that one
the 7950x3d was stupid from the beginning
they released it purely to please investors
doesnt that come out in a couple months
in a few days
ah, i didn't hear about it coming later
i wonder how good x3d will be for the igpu if at all
since we already saw people getting like 40% extra performance for overclocking
more cache for the igpu must be great
it pleases me

whatever floats your boat

what's the emote for 
If only it had more cores, and more cache.
I'm curious to see if AMD's auctually cutting back on genoa wafers.
If they do, that'll be a tad sad, as I'm hoping to play with one second-hand one of these days.
Then again this is just the first 3D gen in am5 no?
yes
Because we'd enjoy it too much.
XXX7950X3DXXX
Hi I was looking into a gaming mouse with a lot of buttons on the side for ff14 im looking for less expensive but can spend more if it's worth it
I'm not very tech smart so I thought I'd ask Instead of just anything
A lot of people swear by the Logitech G600
Ill take a look
If you can, you probally want to go get your hands on some to see how they fit. I had a ton of issues finding any that remotely fit my hands.
I'm not too picky tbh
Ya but then again, your hand matter
Can have Razer Naga or Logitech G600
If left gamepad so uh
Razer Tartarus Tataru or build your own one
Huh
It's expensib as hecc can just build your own macro pad fffff
That doesn't count may not the mechanical switch version
!hank
I've heard really bad things about the corsair mmo mice
Mostly about how the buttons/scroll wheel would literally just stop working after like a month
So I ordered a Pop Air for a work PC because they have one of the few ATX boards and also use disc drives at work and they're using a case that I bought during my early college years
the challenges of owning a bird
anyway build quality is good, except my major complaints are that the front panel uses alligator clips and that the panel covering the 5.25" bays doesn't have very strong magnets
now I wonder
can azure domain admins just usurp ANY account?!
like, if someone finds out your MS account email, can they yank it into their organization and impose limits?
that's around normal price range
Birds can't hold their stuff like human or mammal, must release, rip to le monitor 
I dunno why I bought this but it’s probably for weird Z-height and paste reasons, never really heard of an AM5 CPU bending
I am somewhat confused what kind of graphic card I really want
the goal is still comfortable 1440p 144hz. Obviously, the better (and more expensive) the card is, the more FPS I can reach.
I jump from aiming for a 3060, then go for a 3070 ti, and now 3080. But I wonder if I really need a 3080. It is a card for 4k gaming, so of course it can perform very well in 2k gaming, but it seems overkill (and overpriced)
still, if I bite a bullet for a 3080, I think its performance can last for many years to come
it really depends on the games you're playing
a 3080 isn't going to be playing the latest releases at 144 fps at 1440
Depending on how desperate you are I might consider waiting for 4060
hm I don't really feel any desperation. It is like getting into the PC build hype, then wonder why the heck I choose such build when I take a look a few days later
I have a i5 4460 and GTX 960, so even a 1xxx series is an upgrade
I don't typically play AAA games. Mostly 2D games + sometimes a 3D games but it is annoying having to tone down graphic for the sake of FPS in Full HD
also, more FPS in FF14 means I can put up more prettier reshader :3
also bigger resolution helps with my office work
I don't like running games without seeing a single grass around, or have texture popping in
or round and pixalated shadow
any of the cards you mentioned will be adequate in that case tbh
The thing is on more how the game would work and interact with hardware and also windows, thank u MS
As for your need, I checked Afterburner (bless that guy) with 1660 max w Ipsusu gameplaylite preset 1080p, around 50% with solid 55fps, dip to 40-45 in Limsa but then again my setting is not as demanding
Can scale up to 3060-3080 to 144hz just fine, but then some of the game interaction is weirdo with higher than 60fps but then blame CBU3 o how the game is built not ur hardware 
Tbh 4xxx is kinda weird, unless if you work with AV1 format tho, 3xxx is more economy
!hank
someone tells me intel and nvidia stuffs are overpriced, so I am exploring amd. Particular 5600x and 6800 xt. Though I heard about AMD driver problems or something
pet
A750 definitely not overpriced
except maybe in Asia
oh I mean CPU Intel. Not knowing much about its GPU
nvidia is a gpu company 
but yeah, intel stuff isn't really overpriced these last two generations you'd be more justified saying amd has overpriced their stuff this gen though
you mean amd cpu?
no, i mean cpus
if going for amd 5000 series i'd recommend the 5800x3d if you can spare some budget
yeah, that's previous gen
ryzen 5800 x3d cost a leg for me
ah okay
ngl intel stuff is reasonable but they're in the situatin of early adoption
yep
like mad prop to intel ARC driver engineers, fixing stuff with godspeed
Shits broke yo
ofc there's a mountain of issue to ARC but hey they fix things p quick
they kinda have to, now's a chance to gain quite a bit of marketshare since amd/nvidia aren't doing shit in that price tier right now
Nvdia make me very broke yo
that's how it shall be forever
i hope 5000 series or 7000 series isn't that bad price wise
at least AMD can sit fine (for now) with custom graphic stuff for consoles
it would be great if amd released their apus right now but i think they're worried about killing their low end gpu market

the new apus will be great
especially with us seeing people overclocking the igpus and getting like 40% extra performance already
but prob I won't upgrade till like around mid-late this gen
12 CUs with that would be amazing
ngl AMD custom Navi igpu is some black magic
it's great
what we need is intel to release a better igpu as well
theirs is still garbo
some steam deck peep undervolted/underclocked and saved a good chunk of battery life
me like WAT
imo AMD should step up their apu igpu game with navi
and intel igpu as well
amd doesn't really have competition in the igpu game and if they go too quickly with upping their game, they cannibalize their own market
ah ye that
yeah
they have to take it slow otherwise they'll make investors mad i imagine
Depends on if you like 27 buttons on the side and feel you can press the correct one quickly without misclicks
Gibe





