#🍥|anime
1 messages · Page 174 of 1
the github implies it should work with add difference, but it doesnt
there's a "fixed bug" from a while back making this work, so it's intended too
technically there's no reason why it couldn't work. there's just not really a logical reason to use it that way that I can think of.
i've seen most people recommending to use add difference with the base SD model as the "C" model, it just reduces overall added weight
1 + 1 - 1 * block weight is different than 1 + 1 * block weight
but, i don't know how much it matters
The idea behind add difference merging is to try to sort of extract the difference that was trained into model b from it's base model, particularly when the models a and b are very closely related. Using MBW allows you to overcome the problems that not doing that can cause though so that add difference step is not really necessary in that case IMO.
If I really wanted to do that, then I would most likely extract a lora from model b and merge that into model a instead.
that would probably be easier to test and control as well
Throw this into SVD 
a witch brewing potion, dark night, full moon, mystical.
a lot of the sd1.5 model would miss the witch unless you prompt for 1girl
skill issue
Any manga models for SDXL? There's LineAniRedmond but I don't know of any other.
just found out that seems dshrink is not working with pipe ksampler
same result. i was wrong
no more latex 😔

I just use the prompt line.
Cuute
haha
The power rangers
The gay ranger ,hmmm?
And the villan, The Jester!
ok off to work be back in like umm 5
hrs
charming
Its been a while since I posted but I've been making a lot of progress.
Tried to get the same pose for 1&3

@wispy canopy can you try out stable zero123 on your a100 and show results, pretty pls lol
unfortunately, access to those doesn't work that freely 😦
lol
when you get access
let's say your access to 24GB+ of VRAM is more accessible than mine
during the next full moon, after a sacrifice in blood
shaikorth be prepared for the sacrifice
😱
i don't have mailbox, i only communicate with pigeons
even in this exact moment, i'm sending a pigeon to someone with a phone, to comunicate with you
During World War II, Project Pigeon (later Project Orcon, for "organic control") was American behaviorist B. F. Skinner's attempt to develop a pigeon-controlled guided bomb.
i'm utterly fuc*ed.
anyway, i know the truth https://en.wikipedia.org/wiki/Birds_Aren't_Real
It's true
Thank you, that one required a bit of editing to fix some problems in the original gen.
nice
I used controlnet openpose SDXL and it works but the face and body and hand isn't as good, it sort of breaks up
For example, I input this as the controlnet
then it turns into this
seems about right
looks like a bit of artifacting in the image, so it's not rendering very good to begin with, probably need to lower your CFG or use more steps (or both), might get a better result
but even then, hands and faces are pretty hit or miss with controlnet and her left foot is probably more of a depth problem, complicated poses are hard to get good
I see. I tried MultiControlnet but got an error, but didn't try too often. Do you know if SDXL MultiControlnet works well?
i havent done any controlnet with sdxl yet
I try to make things work with just prompting if possible, if i can't get it to work it's probably too complicated for controlnet to help much tbh
if you have an actual image of that pose it might work better than a wire model, so you could try that
I see, yes. I could try using depth controlnet or something
just started experimenting with depth controlnet.
damn, it's like magic
I can't seem to do anything with SD these days without ending up writing a bug report for something on github 😒
It's like no one actually uses this stuff or something
what kind of issues are you having?
well, I was doing some merging using the supermerger extension and it wouldn't let me save as safetensors because of some contiguous tensor error
there was an open report on that, so i just added to it
in my search for a way to fix it, i found the 'model mixer' extension that actually saves properly, which fixes that issue, but it has it's own bug where the generated image of a merge is not the same as the image generated after the model is saved
and, the saved model, even with 0 alpha on model B, is different from the original but not the same as the preview, so it's saving something it's not supposed to, and also 'live' generating something even more different
sounds like rounding differences of the seeds
it kind of seems that way, but i'd think using a fp16 model and saving it as fp16 (not merging it with anything) should not change the values
but that's likely the problem, even if it shouldnt be happening
Merging models can be a pain .. especially when one or more are converted
these are the original model on the left and saved model on the right. the changes are fairly small and I probably wouldn't really care since it's a tiny bit of changes
BUT this is the 'preview' merge image before it's actually saved, it's not only different, but the quality is better in many aspects of the image.. so i kinda want it 😄
but yeah, this whole project has been a pain
reason i am messing with comfyUI now .. 😄 can preview every step 😄
wtf..
decided to confirm my testing by using a1111 1.6 instead of the 1.7RC and generate the images with a publicly available checkpoint, first image is before installing the extension, second is after
it's altering images without being enabled
same seed?
nothing enabled, i generated the first image, installed the extension and restarted the UI, then used the original image to reset the parameters and generated a second image
maybe the model/vae/lora/embed some can be really random when not using specific keywords in the prompt even with the same seed
hmm, seems the second problem is unrelated to the extension, for some reason the first time i load the counterfeit model it generates the first image, but if i restart the UI then it will only generate the second image, even on a clean install
no idea what's going on with that
m?!
now https://civitai.com/models/4468?modelVersionId=57618 this is. before it was https://civitai.com/models/79083/bluepencil?modelVersionId=107812
high quality anime style model. Support☕ https://ko-fi.com/sfa837348 more info. https://huggingface.co/gsdf/Counterfeit-V2.0 Verson2.5 https://hugg...
HuggingFace Concept Easy to use Generate anything Recommend ClearVAE The included VAE is broken. Be sure to set the VAE.
you can see all in PNG Info
nope. this is Automatic1111 - V1.6.1
I think the point is not in the tool used.
direct from model:
after processing in my comfy workflow 😄, 6 passes of hand and face detailer 😄
i literally love this model
pretty sure is this https://civitai.com/models/4468?modelVersionId=57618
high quality anime style model. Support☕ https://ko-fi.com/sfa837348 more info. https://huggingface.co/gsdf/Counterfeit-V2.0 Verson2.5 https://hugg...
nope
now it this is model https://civitai.com/models/228564?modelVersionId=257926
Check out my other models: https://civitai.com/user/aji1/models ···················································································...
wow, seriously? the style is the same https://civitai.com/images/4570260
but LOra same
yes... this is look very kawaii!
face detailer passe - in Adetailer "Use separate checkpoint"?
am using comfyUI
🙂
still rocky numbers
wow workflow!
now i'm about to add depth preprocessor to the workflow and a pose workflow 🤣
now i just need to see where to place everything XD
you broke your workflow lol
this is mine now and i still need to add this
still messing with it 😄
am just messing with it to get a similar look to a graphic novel i love the artstyle of
this looks like a new art style
tho it kinda looks like it has lot of artifacting going on
im having a slight dilemma with sd1.5 and sdxl
anime faces are so cute with sd1.5 but lacks so much coherence and thats opposite of sdxl
i prompted for her to be playing with a basket of chicks but sd1.5 shows no signs of visual engagement
i think dalle3 does that better
it's not what i was expecting, but the result is pretty charming lol
i love how i could give the image more depth
but this workflow is totlly unpredictable, exactly how i love it XD
next thing, i need to add concat prompting
this workflow is a carnival. i generate such mayem with 2 words as prompt XD
she reminds me of the character of an old game
or maybe an anime
but i don't remember which one
oh
🤣
this workflow makes no sense XD
I tried sdxl as base then upscale with 1.5 but it didn't work out too well in my comfy workflow, I think I need controlnet upscaling to raise denoise
also sad that sdxl is missing a lot of concepts I frequently use
The image has PNG info for the full details. It was a pure txt2img gen. I used a noise offset lora to help make it darker and the dynamic thresholding extension helped as well.
i cant suggest on comfyui, but with a1111 i usually generate at 512x768 with sdxl then upscale by 2x using hires fix with 0.4 denoise, also as of late i prefer not to use lcm due to its loss of image quality, so basically rendering with dpm++ 2m sde karras, 30 steps and 8 cfg
btw @stable crane in case you meant base as in sdxl base model, unless you are training a model i'd suggest using a trained or merged community model
no I mean bluepencil or whatnot
bluepencil is quite nice
i hope you are not using any refiner when using bluepencil, and if you want to upscale you can either try 1.5x or 2x ... i've noticed when i set the render resolution to 512x768 its much easier for my system to upscale by 2x for hires
for bluepencil I min 1024x1024
This time it's all about stability and repeatability! I'm generating a character and an outfit and trying to reuse the same elements in multiple settings, poses and facial expression.
Workflow and all images: https://f.latent.vision/download/character_stability.zip
Discord server: https://discord.com/invite/W2DhHkcjgn
IPAdapter extension: https...
wow this video really showed me how good the comfyui workflow can be
you would be fine with 512x768 for most XL models then upscale by 2x
and if you dont want to hires fix you could try 768x1024
@stable crane is there a prompt you're working on now which you could share so i could try it on my end too?
only lewd prompts in NAI 🙂
somehow not surprised
@native halo black
she loves black 
black furniture yes

The only use for nai v3 lol
portrait of a woman, romantic, calm, sensuous, long hair, silver hair
These remind me of the art style from puzzles I did as a kid
you had some great puzzles!
i would always pick out the ones that looked like they'd be the most difficult 😄
great training in perception
most likely the vae you're using is fp32 instead of fp16
so it takes more vram, but then it runs out of memory so it converts to fp16 and tries again, which takes longer
dunno, never tried it
in a1111 having something like --no-half-vae in the settings will make it always use fp16 and bypass getting that error
i know comfy has something similar but i dunno what it is off the top of my head
wow, a tomato sauce lora
no no no..
remember that excessive gore is restricted on the server
yeah, just a remind
i too don't know how much is too much
sfw discord rules are a little too much broad
in any case, in this server, we have a rule, if it's a red stain, is tomato sauce lol
yes!❤️🔥
the first 3 are fantastic, the 3° the light is a little unnatural and the last, pretty average
very heavy hand pose. and a great result!
fingers and hands for me are something from the realm of fanaticism. I can’t get them under any control
how to use
i was trying to instal destiny 2, but damn, it needs over 200gb hd free space to install
freefallin'
omg
that requires some serious dedication
i need to free a lot of space
i freed 150 gb from the main hd and i was only half way
so, it's maybe 300 gb?
what a joke, it's the first time i felt the desire to format my 2° hd to delete the partition
Nooooo! Who hurt her?!?
who
for me ur message just says the users id
@strong elk can you stop trying to scam people???
426417090442821643
oh yea
@dull jackal @barren lintel This guy left the server (well, he did when I posted this), and based on his messages and the name, I'd recommend deleting his message(s).
Also, hope your day is going well!
And here is your sacrificial Miku, Fruit.
sorry about that, i left for a sec cuz the server seemed to glitch out, like no channels were displaying
but i promise im not a scammer or something
I have no opinion or ill will toward ya. I'll leave it up to the mods to decide. 
what are you even talking about detective, you should get a ban for that handle
discord is having a stroke on the servers 70% of servers are glitching out
Yeah, there've been problems.
what was that all about ...
i dunno if discord was down, i dont see any issues on my end yet
well im just trying to find people who id wanna hang out with for hours on end. co clearly torqx is out of the question, but since u dont seem to have ill will towards me would u maybe wanna team up
18 minutes to generate in comfyUI but i like the result 
@silk narwhal on a scale of 1-10 how much do u like me
you wanna hang out, you can hang out here with everyone, we post stuff and chat a bit
1 being hate, not like only a little bit
Love the layout and it's strangely cohesive despite the noise. Very interesting style. 

you literally being here for like a day not even?
came here to test my discord but saw this instead 
Well, the original join date was on the 9th before exiting and rejoining just now.
well im sure they have a first impresion of me
But still...
hey smol sus, did you get the new card?
nope, not yet
Is it just me or is that a new avatar? It's nice
it's been awhile 
oooh the wait game on pc tech is forever tho since it changes every 3-6 months
yup, but i guess it's gonna be worth the wait
since it's like the first card out after the boom of AIs
5000 series sounds good tho 🙂
I just want more VRAM.
must be pretty expensive too im guessing
But I'm not holding my breath 
i have to get more ram
VRAM for the rendering and RAM for Storage of AI models
yeah
not exactly, i need find people who i think would wanna team up with me in what im trying to do, and i need 1-3 people, but like thats only gonna work if i like them and they like me. but like so torqx, and kuromi are out of the question. so what about u smol sus, on a scale of 1-10 whats ur opinion of me
sdxl models take up a lot of ram to load

Base SDXL Turbo hasn't gone over 6 GB of RAM for me yet
im joking btw
i mean i have to wait 40 seonds to load sdxl on my a1111 with 16gb ram
You are up for the job then, buddy
Tbf, A1111 is the problem there but your point remains valid.
@lyric zealot 
DDR6 will be faster at it 😄
im hoping the next a1111 update will be sweet 🙂
when sdxl came out a1111 caught up to speed with comfyui in few weeks
@lyric zealot smug is so funny, seemingly normal gens turning into looking down on you
first pass out of 4 🙂
24gb vram is kinda like the min you need to play with multiple AI stuff
is that what you are targetting with 5000 series?
kinda
oh wow
@nova remnant get ready for the bare minimum vram of 24gb
my pc stuttered from reading that

I think the community is doing that
It's kinda like how SDXL needs crazy amount of vram
then now it's getting better
but better how
purging junk data from the base models that just results in bad outputs, kinda like cleaning a messy room
i see lot of devs that worked on sd1.5 can't manage to train sdxl just as easy
primarily due to resource demand
you know lot of ppl would be very happy to be using sd1.5 if hand glitches could be fixed and maybe adding a bit more prompt coherence
most hands on 1.5 can be easily fixed now..with controlnet,inpainting etc
can you explain
ahh inpainting
thats extra work required, what i mean is generating images that wont need extra effort to fix them
And who are you?
btw speaking of inpainting if only hands could be just as easily fixed as faces with adetailer
Vil
just ignore, troll or something
trees on top of trees
my discord is still so fucked
what do you mean? i dont see anything unusual on discord
is that about running bots or something similar?
oh
70% of all servers were down for at least an hour now.
i didnt notice that since this server is obviously not affected
about 5 minutes it was down
i see, i was offline in the last couple of hours
yup it's slowly coming back
tbh I have no idea who you are, but repeatedly mass pinging isn't a great way to get people to like you.
@supple raptor many thanks for your job! the new version pays more attention to the legs. Or am I just so lucky today?
v3 has definitely been a lot more consistent with anatomy in general for me. I think it solved most of the annoyances that I had with v2.
v2 struggled quite a bit with backgrounds that weren't nature and was quite prone to diamond shaped pupils as well as some general weirdness with anatomy at times.
In terms of anatomy, the new version is indeed more realistic. but at the same time, a certain cartoonish charm was lost. or is it just me?
no, it's definitely a different style than both previous versions. perhaps I should have named each of them differently, but I think of it as more of a series of models that are related, but different from each other rather than each one being intended as strictly an upgrade of the previous version.
then that explains everything. In any case, excellent work as always! THANKS!
cute
Trying to use Multi-Controlnet (openpose, depth, and canny) but the image keeps getting messed up (tons of lines all over like crease marks all over the image, hands and feet consistently messed up)
least buggy comfy workflow
maybe Canny result not good?
Hmm, I'll mix and match and see if that makes it better
take the cheese from the mouse...
The criss-cross lines are gone...mysterious. Hands and feet are still bad lol
Accidents are not accidental (c)
Who is this person?
@sick pond You saw JJK?
all in PNG Info
???
should be in the png info ..but it is 3 different models in seperate passes in comfyUI
7 times including face and hand fixing
Do these women you rendered have names, by chance?
nope just generic booru tags
1girl, etc etc
So the beautiful women being generated were on accident?
that a Bot?!!
just luck out of this spaghetti :
can send the json .. just have to load that and install the missing nodes with the manager if you have that installed
yes
most steps are cleaning up the first generation and doing upscaling etc
With comfy, the PNG also has the full workflow embedded in it so you can just drag an image from the outputs folder into discord to share the workflow.
since you have a1111 already, comfy doesn't have to take up much space at all. you can reuse the A1111 venv for comfy.
with the models i have .. i am at 60 GB
just have to activate the venv that's in your a1111 directory first, then run the main.py in your comfy directory. I made a simple .bat file to do it for me. if you want to use it, you'll have to open the .bat in a txt editor and change the venv path to the correct one on your system. make sure the .bat is in the root of your comfy directory.
download that, place it in your comfy folder (the same one that has the main.py file. open the .bat in a text editor, change the pat as noted on line 6, save your changes and you're good to go. there's a place in there to add launch args if you need them too.
this is the folder where you'll find the activate.bat file that you have to point the one I attached to. it's inside of the scripts folder. the one I uploaded does not go in here though.
so line 7 of the run_comfyui.bat file should be changed to call C:\ai\stable-diffusion-webui\venv\scripts\activate.bat.
the run_comfyui.bat goes wherever you downloaded comfyui to.
You should be good now. As long as that file is in the same folder as comfy's main.py it should work.
/A cute woman standing in the living room, scenery, detailed background, masterpiece, best quality, high quality, absurdres, xmas lora:xmas_xl_v1:1
Is not fast and requires a whole bunch of models.. all can be found on CivitAI
AWPainting, Snowfall_V20, all controlnet models, add_details Lora
https://github.com/ltdrdata/ComfyUI-Manager ..will make it easier to fix those red boxes
method 2 is the easiest for you
download the file in step 2 in the ComfyUI_windows_portable folder and run it

Let them comfyers hack the system
sexyy
🙂
change your username pls #✍🏼|rules-and-tos
wow, charming
i cant its for my redditor collection😔
Can check the meta or import into StableSwarm
models are: Tete experimental AhnnOne
ti embedding: aidxl 0.5
:)
I should upload some more other stuff here
oh yeah keep in mind Tete is an experimental mbw of AnimeIllustXL which is an SDXL model
cute
ok
1060 6gb
?
4min for a 1080p img on normal sampler and 1 min if i use lcm
because xl
also the 1080p img i gen is 540x960 > high res fix 2x
u must be doing something wrong maybe u are gen 1024x1024 native?
how many steps? i do 25 normal with dpm 2m karras then 15 high res steps
do u use auto1111 ?
thats odd cause for 1.5 the difference between comfy and auto1111 is minimal it must be maybe the driver version u are using
Sorry--I was on a trip today! ❤️
Can you not mass ping random people, thanks!
Hello everyone, I'm new to SD, I come from using midjourney and would love some guidance, Im a dungeon master running a furry campaign and want to know how to generate similar style of anime-like SFW here, could someone help?
are there any active cyberpunk 2077 discord servers? Anyone know? Not the official one, I'm not handing out a verify phone number and they want one.
Did someone help you?
not sure, but I get the frustration 😐
yep....
I guess I'll just ask something I was wondering here too. Google isn't very helpful. Did they remove "Oxy Boosters" from the game? (oxygen boosters)
I can't find them
Haven't played it. Waiting for <=$20.
phantom liberty is worth every dollar
it's an expansion, not what is commonly cheaped out as dlc
they also make the relative smaller mapsize of the expansion be much larger because of verticality
Trying to get her playing Cyberpunk 2077 😛
reminds me of misty except hotter
blaster saber? 🙂
colored charcoal drawing, anime style, alt woman, kneeling, black eye makeup, choker, spikes, black messy hair, skirt, red chunky shoes, playing Cyberpunk 2077 video game, blue streaks in hair
pew pew
staying with the theme
i wanna try han solo
pew pew
pew indeed 🙂
that's with "(((studio ghibli anime style 1980s 2d flat cel shaded))) "
ha, some firepower
Chewie merged with Darth Vader and a Porg somehow... 😛
No, I've been browsing all day long XD
There once was a fox named nox with a box full of sox and in those sox he placed his shutting down
damn, they got to him
another victim of the wombat police
what does it break this time? 🙂
hopefully not everything 
I'm too afraid to try
but well, i think it's also time to have a fresh installation of auto1111
since my auto is getting buggy
xD
was it ever NOT buggy? 🙂 (hm, sdxl still struggles a bit with text)
live from github
You're just looking to do anime style generations with stable diffusion?
oh geez... a new update? who is brave enough to try it?
@dull jackal are you here
urgent
@wheat falcon are you able to delete post?
it's urgent
@wooden coral @gritty spruce you guys here?
@wooden coral you there?
well, i don't really wanna link it
someone posting gore
?
Where
Heyo, should be gone now
Lmk if I missed smth
that's why i said urgent
Thanks for the report
even if it's ai, should not be allowed here
Didn't look very ai but who knows these days
I think that's it
well, not sure. But obviously not stuff people want here

well
we don't really have to go in depth in analyzing this troll
well, it's just kinda sad that, that's how they get validation online

anyone sub to artists? curious if you prefer:
- download their works in zip files and view locally
- view stuff online at patreon/ko-fi/other/etc
I can feel stable diffusion and other AI applications just leaving the hands of any consumers that weren't able to spend 1000-3000 euro on an nvidia gpu with 24gb+ vram
I'm hoping we get more vram
I'm waiting to see how AMD will respond to nvidias lack of interest in gaming
anymore
hopefully with cheaper stuff
I don't have to care for how many legs does this beast have
for what it's worth, i've been using the 1.7.0 RC for a week or so, seems ok so far
maybe some gradio incompatabilities with some extensions
I love this so much.
This is super adorable.
now we know why she's called little red RIDING hood 🙂
and she made friends with the wolf, too
Can you find my little friend?

@lyric zealot 
this not a bodysuit

a gnome 😂

My dad sent me this. He misspelled something and bing gave him this instead of what he wanted.
A fantastic mistake.
giv
She is not big .. it is a movieset 😄
angy
needs more latex
nah just simple image 2 image
google censored my prompt today
i was shocked and horrified by the power of woke culture
hmm ok thats different
yeah imagine that, i used bard a lot for prompt ideas
Oh Bard
all i was asking for woman in short attractive clothing
the short part rubbed bard the wrong way and it lectured me
only burqa allowed
the world is ending
and wanna know how it lectured me about 'short'?
i was asking for a nice pose in trendy clothing, and it gave me a prompt about personality
i think the world is transitioning towards an end, unless something happens that could surprise everyone
SDXL 4.0

We'll only need to click generate and it will know what we want exactly
Year 2030 coming soon
prolly
cause time feels like it has sped up in the last few years
magical girl making cupcakes not really what i had in mind for magical girl, but the cupcakes are surprisingly consistent
adds to his prompt :D
instead of magical circle it's now magical cupcakes 😄
waits
goes back to watching "Kikansha no Mahou wa Tokubetsu desu; A Returner's Magic Should Be Special"
huh. not what I expected...
hmms , changes models and puts thru img2img
wait i've been using Restart.. not lcm
doh!
IlovetiledUpscale
cupcake cake?
hha miku cupcake
ah ha! cupcake fairy
cupcake fairy 😏
same prompt on 2 different custom merges
second one is really nice, but it leans towards realistic a bit too much sometimes
hmm 6am.. I should be in bed but it's my day off so .. meh
yawns and falls over.. thud
did u just block me ? what did i do ?
Nami
hehe... TBH i don't use any upscaling anymore since the SDXL models are good enough for 1024x1024 with a wide margin, and faces are much better, too...
With another model tag "fishnet" created nets and fish in interior 🐟 🥅
1024p is the lowres now
all relative... most people i know only click on the image once and then get the large discord preview which is 800x600 pixel only, anyway...
look at her, she approves 🙂
Hi guys. can anyone tell me why when I post an illustration on Civitai I get a message "TOS Violation - Blocked for lolita" ? and how can this be fixed?
Check metadata of the file
more fun
how well would it do exploding cars
dont upload pics to civitai post them in pixiv instead 🌚
that mood when the model does great hands but it put left hands on right arms and vice versa :/
haven't been using ai for a while, what's the best model rn?
Pixiv 
Many bodysuits there
lol
The best model is the one you like the most 🤷♂️ It's completely subjective
DreamShaper 8 and DeepBlueXL are my goto, next to AWPainting
i personally dig much more anime models
well u are in an anime channel
eheheh
for anime stuff I'd probably suggest bluePencil/DeepBlue/kawaiiPencil
imagine downloading an anime checkpoint that cant prompt anime characters
the definition of chaos in picture form 😄
accidentally moved one of the node links to the wrong node in my workflow :/
just assume she is moving almost at the speed of sound
It looks like you're generating 2 different prompts and then blending the latent noise before rendering or something. Pretty interesting affect
Uploading to civitai is simply a way to support the authors Checkpoints and LoRa`s. And on pixiv, of course, I re-upload the illustrations
man, CFG is confusing. The SD documentation, and therefor all the videos and reddit posts about, all say the same thing.
Basically, lower CFG values are 'more creative' but better detail while higher values are more strict to the prompt, but worse quality
I'm not convinced this is an accurate description of what it is or how it works
especially with more simple/shorter prompts
I guess it depends on what you think is 'quality' though, one of the videos I just watched the guy found "anything over CFG 16 starts to get unusable" but the images he was showing were badly burning around CFG 9 🤷♂️
"Burn-in" of the image at high values allows you to avoid one addition. but his work did not satisfy me much.
or maybe I'm reading into it too much and i'm looking at it wrong, this is a very small subset of a grid I did to try and find the best CFG/steps combo for this model
as they said earlier, many models do not support values more than 8-10
CFG 1 and 2 basically look the same, just lower contrast on 1, 3-15 all look mostly the same, a few details here and there but nothing drastic
I must have missed a conversation at some point, I don't know what you're referring to
the more details in the training data the higher the cfg end up being
really low detail data ... low cfg needed
I asked the same question here earlier. and it was discussed.
Ah, I didn't see that
when generating i use 11 as my average point .. for realistic i do 12 or 13
for hires fix i use 4 or 5
I can't go over 6 or 7 without burning
for me it 5-8
on this model specifically
how do you use different meaning in hire.fix?
to me, it seems like the higher CFG is the one that's "more creative" since it just starts adding random details
why not use LoRa to add details?
i use comfyUI .. the face and hands fix nodes i set the cfg to 4 or 5
I don't need details, that's not a problem
oh comfy! then that explains everything
I'm not trying to fix anything, I'm just trying to figure out why CFG doesn't behave the way it's described
either it's using subjective terms, or it doesn't do what it says
I don't like over saturated high contrast images, so CFG 7 in my above grid is worthless
SDXL based model?
Does CFG 11 have more detail? sure, but it's not usable, so the detail is not worth anything
yeah, this is sdxl
yea..SDXL is lower cfg than 1.5
or there is still a dependence on how the model was trained. what if view dependency data using different models?





