#🍥|anime
1 messages · Page 169 of 1
lcm is getting influenced more by the model, than the prompt
you're changing the cfg and steps when you change to lcm right?
yep
yes
14 steps and cfg 1.4
50/5
😄
leaves 50/5 adds his hi-res mdjrny4 styles
waits
thats creepy in a wierd way
yeah, it is
heavily edited prompt
The one on the left from the previous set is better i think too, but it's just the expression, so either could work
lcm doesn't always work for me
it's not very consistant
but can be a good starting point for img2img
I noticed some models are a bit more fiddley with LCM, but for the most part if you make small changes it's not hard to find the sweet spot
yeah and my merg of other merges prob isn't helping 😄
every 2-3 steps up or down can impact an image way more than it would without LCM
but I still like restart
seems my anime merge and my fuzzyanime merge are good so yeah
grinz evilly turns upto high on both steps and cfg with lcm... waits for horror
ooh no
hope you like it ❤️
It's gorgeous
bpn?
brightprotonuke
my checkpoint merge i released yesterday
feeling finally confindent enough it's decent
hmm sorta fuzzy around edges
there we go
wait... the hands. wtf?
cropped looks better
ok thats it for me.. thud
would have been so cute, without that disgusting expression XD
Yeah, looks dumb 😣
damn, that's the female version of the crow XD
She is undead, look at that ear
well, the crow, in the film, was pretty much an undead lol
I have no idea about the film, sorry
an old BUT good film of 90°
ok thanks
with a big story behind
2 chapter, should have been a trilogy
but do you know what happened?
the main actor got killed for real, in a scene
someone charge the gun, with real ammos
that's horrible
yep
the actor was very very good, that's why the impact was so much
never found out who was the killer
and the reasons behind that event
try to imagine a Leonardo Di Caprio dieing in such a way, that was the level of that actor
❤️ very nice idea
charming
oh, the actor of the film the crow, was the son of bruce lee... damn
Brandon Lee
an hippie?
found a setting for deepshrink that works, now to get the image interesting again
guys, sdxl lcs generates better at low steps than 1.5?
better anatomy yes but it doesnt have all styles or anime characters that 1.5 has
i was playing again with lcs, but with 1.5, i always get crappy results
you mean LCM?
you are doing something wrong in that case, this is LCM (8 steps, WITHOUT upscale) #🏞|general-with-images message
yeah lcm
finally, pushing cfg to 8, i finally get something remotelly resemple a result without lora and lcm
you will never get the same image, even with identical prompt
please send settings for both
with lora and cfg 8 i get this, ok, is crap, but it's way closer to the prompt
do not use the same seed
even with different seeds
without lora, i always get a big tree
with lora, i always get a big face
this makes no sense
please send me the prompt
and settings
i am actually busy, but i will answer as soon as i can
(masterpiece, best quality, highly detailed:1.2), made by miyazaki
2d game scene
HDR photo of landscape by Gustave Moreau,Thomas Kinkade,James Gurney. Carne Griffiths. Frank Frazetta. van gogh,Alberto Sevesooil paint,masterpiece,Realistic,deep colors,blue tint,only bronze gold moon,night scenery,fields,Field,Intricate,detailed,sharp,clear,Better image quality,harsh brush strokes,High dynamic range, vivid, rich details, clear shadows and highlights, realistic, intense, enhanced contrast, highly detailed
this is the prompt
(low quality, bad quality, worst quality:1.2), embedding:EasyNegative
just copy paste the whole info
@steady grail please drag that image file in here and share
the negative
it is easier
i don't know if it still have metadata
i will check
if you have time, please check
let me look for the original if i still have it
or generate another one which gives you the big face
i am gonna load that up and see where its going wrong
btw. there is a dirty trick i used to generate this #🏞|general-with-images message
overweight some things that are not showing correctly
for example, my negative NSFW prompt has :2.0
the rest is normal
low cfg like 1.5, can ignore nsfw negative promt, but also some things in posiptive
use at least 1.7
and add more weight to things that "disapears"
do not increace cfg too much
2.5 is max ever
oh, i think i got nsfw even with it in negative when i used cfg 2
i tested that with eface's bpn
try something like (nsfw, nude, naked:2.0)
and add the other things there
in positive use something like (pink hair:1.4) for example if hair is not pink enough
the prompt was .. a gothic girl in a tub of milk
ok, generating something new for comparison, with metadata
cfg of 1.5 is too low for nsfw negative to be applied
adding :2.0 weight to negative prompt will help
what happens if you put sfw in positive and nsfw in negative
lol just thinking here
shaikorth you got one?
generating
it's the one up there
this
damn, freeu makes so much difference
nice ok
without freeu i got this
weird, the image is maked
and whats your lcm lora weight?
and the sampling method?
ok there is the problem... i suggest try the following for a test
with lcm lcm sample and karras
sampling method DPM++ 2M SDE Karras
Lora wieght 0.3
my advise is to use only one of those 3 with lcm lora - LCM, Euler A or UniPC
i just noticed something, without lcm, during the gen, the noise get the form of a face, than get reworked and get the form of the tree
viking hang on
try what i suggested shaikorth
we can get you to have lcm sampler too but check that first
unfortunately, some models do not work properly with any of 3 i mentioned ☠️
so, yes, try what torqx sugested
back on sd1.5 before lcm sampler was a thing i tested several images to come out good with dpm++ sampler like the one i mentioned, but had to reduce lora weight to 0.3
something is cooking the images with the same set up 😦
i experimented too much with my setting lol
just do not use :0.3 with cfg 1.5 🤣
with all the metadate and settings
i was so confused why i am getting totally washed up images
cfg 2
almost forgot
youtube was absorbing all my gpu damn hell
lol i leave youtube on most of the time or i get bored
ok nuked out the workflow, let's work with your, mine is too messy
but i can't use xl
slow graphics or you need 1.5 loras?
slow graphic
can you load that image i posted?
the model was an xl
wait wait wait
xl models - XL version of LCM lora
1.5 models - 1.5 version of LCM lora
do not mix those
be sure that you are using the correct version of LCM lora for your model
1.5 lcm lora + sdxl model = https://www.youtube.com/watch?v=l482T0yNkeo
Official Music Video for "Highway to Hell" by AC/DC
Listen to AC/DC: https://ACDC.lnk.to/listen_YD
Subscribe to the official AC/DC YouTube channel: https://ACDC.lnk.to/subscribeYD
Watch more AC/DC videos: https://ACDC.lnk.to/listen_YC/youtube
Follow AC/DC:
Facebook: https://ACDC.lnk.to/followFI
Instagram: https://ACDC.lnk.to/followII
Twitter: ...
@steady grail here is the basic idea, given you are using sd1.5 now...
sampling method : DPM++ 2M SDE Karras
sampling steps: 8
cfg: 2
make sure to load the right LCM LoRA for sd1.5 (its different for SDXL so don't confuse the two), and use LoRA weight 0.3
yeah i know
dont use hires fix atm, just check if your images are coming out right
something is slowing down my gen by a lot
yeah, weird
reboot the pc maybe and free up memory
can i ask, what's your vram and ram?
that would put heavy load on your system
not good to do that
can cause system crash
yeah i know
i did some risque things for curiosity
you can do all sorts of stuff with sd1.5 too
even experimented with overclocking, not good things even when i knew what i was doing
i love pushing my babe to the limit
but no problem, i'm a tech XD
lol ok
but seriously over loading your system is not a good idea when you are running with 4gb vram and 8gb ram to run sdxl which requires lot more to function
on paper, i'm an engeneeer in electonics and telecomunications... in reality i'm just a mad scientist <.<
i have loaded any sort of diagnostics studied too many papers for my own good xD
i see you are very curious about sdxl 🙂 upgrade the pc and you'll have lot of fun but to tell you, sd1.5 isn't bad .. just lacks some coherence but output can be pretty amazing
with this workflow i get these 2 results
the only difference are the lora, steps and cfg
and sampler
i try to generate something with only steps as difference
i'll try without changing steps too
already, i can see, the 2 results are similar
god bless, anyone daring enough to update auto1111?
hey smol sus, whats the update about ?
oh boy, it's a long one
released when?
im curious cause i've heard big update was coming
nice, reading it now
even with the same sampler, still not tree
ummm
is that recommended to update
also i wonder if they have official git hub page update
i guess it's probably better to wait
yeah i wouldn't run with reddit
it's the release candidate, so if you git pull, it's not gonna update
i see
best thing to do is to wait for release candidate to merge with main
yup, it's kinda scary
yes
looks very radical
Imma let early birds test the update
oh, some nodes needed update

@steady grail 4GB video card support (also reports of 2GB working) you might wanna know about that update
and @nova remnant
oh, that's good
https://www.reddit.com/r/StableDiffusion/comments/18agngo/fp8_support_added_to_the_automatic1111_web_ui/ i think it's this
Reloading checkpoints on the fly
No token limit for prompts (original stable diffusion lets you use up to 75 tokens)
xformers, major speed increase for select cards
it's not that i have anything to lose
smol sus the sweet bearer of good tidings
i have it outdated just to experiment
or you know, everything can just break apart 
it's good to know, too bad i'm already too into in comfy to return using auto1111 XD
yeah, i saw that one on my civitai page, i think 😄
yeah was playing with it... it came out cute tho 🙂
i think my lcm settings to go are lcm lora strength 0.8, lcm sampler, 12-20 steps, 2 cfg
before i had the lcm sampler -> lcm lora strength 0.3, dpm++ 2sa karras, discard final sigma (sampler setting in A1111)
did a huge comparison of settings, 2sa karras and LCM sampler simply work the best with lcm lora
i was doing something similar but after i had lcm sampler i use it most of the time with 0.6-0.8 weight
well i found some of the render to have bit more contrast so i was playing with 0.6- 0.8
it tends to overcook images on some models, i'm only using bpn1.3 so the sweet spot is around 0.6-0.8, as torqx also has found out
above 0.8 you start getting overcooking and and artifacts
yeah ... above 0.8 is too strong
the dpm++ 2sa sampler doesn't know how to work with the lcm lora weights, and needs to only fed the lcm lora weights weakly
only dpm sde also got decent results
i'll try that setting too
the rest... simply is worse
depending on prompt, there's artifacts, or it's actually really good
close settings, but the first is withou lcm, the second, with it
@wispy canopy what do you use to merge checkpoints?
the difference is radical
and without lcm i get a more close resemblance to the prompt
Welcome to our latest tutorial on "Stable Diffusion Magic: Effortlessly Swap Backgrounds and Hair Colors in Your Portraits"! Discover the power of image transformation using the advanced Juggernaut XL version 7 with Stable Diffusion. This tutorial is perfect for anyone looking to creatively modify portraits with ease.
🔍 What You'll Learn:
- Se...
i should upscale that tree...
A1111:
- supermerger, add difference normal, to test random weights
- supermerger, add difference train difference, to get a smooth model merge, without upsetting the balance of weights too much. This is after 10-20 random mixes in step 1, to decide what weights i'm going to use
Comfy: - Block merging (SDXL transformers), again using a add difference method (have to construct the node order yourself) to fix any leftover weights you damaged in step 2
rinse and repeat
up until you have a merge that does what you want it to do
lcm listens very well to whatever you feed it, in my experience
so, having conflicting tokens generally really upsets the prompting
i need to experiment with a prompting very focused on lcm
that's one of the key aspect of LCM it would add bit more coherence to your sd1.5
i'm sure you'll love proper limbs too -> lcm fixes those very often
thanks, I'll have a look at supermerger
oh good
you can narrow in on the specificaiton or make broad generalization and lcm would do that both with a nice touch in the output
i'll be honest, i got used to lcm, and i don't think i'll switch over to another sampler back
restart was very good, albeit slow, but give the lcm lora some extra steps, and it's WAY faster than restart, with similar quality
this is the workflow of someone that loves coerence? XD
looks dreadful to me ngl 🙂
i'ma simple man -> i just type some text, pretty stuff fcomes out!
finger on her hand traveled ot other hand!
you have no idea of the interactions between these nodes XD
i suppose i'll give lcm a chance
and lcm is GREAT in combination with kohya's highres
i still need to see a minimal influence of kohya in the end results
maybe it doesn't work with highres fix
you mean, using kohya AND highresfix?
This is an amazing image.
yep
you shoudn't need to
yeah, i was thinking the same
yeah, as i was thinking
you are thinking right, i can confirm this for you
who needs bravery, when you have wisdom and a gun
holy canuoli, that come out cool
So cute
hmmm installed StyleTTS, gonna try and train some character voice from a game and see how well it replicates it
IMO the best way to obtain creative prompts is to use an LLM model with an instruction for that
Or, wildcards
Nice one, too bad it's lowres
i think discord compressed the quality
@wispy canopy was SDXL Turbo part of the merge in BPN?
[__medium*__|__medium*__] by ([__artists__:0.3]:1.3) , [anime line art:0.2], [{1-3$$__nouns__|__nouns__|__nouns__|__nouns__}:0.1], [[__movements__|__movements__]:0.1],desktop wallpaper , {abstract|surrealism|realistic} is my "i really don't know what i'm doing" wildcard
gives cool results
no, i specifically left it out
so you can use it as a regular model too
turbo does degrade quality a bit, imho
Nice one, mine is far more complicated 😄
Wow, what is the tag for that hairstyle?
Mine?
No specific tag, prompt was just "Anime Female Sherlock standing leaning against a Ferrari 360"
added feminine in front
So it's "victorian hairstyle", got it
i made a basic merge with 3 models among which one was turbo sdxl . and here is the result i got from it ...
Perhaps that might work
not saying turbo is bad, but i notice backgrounds become a lot less detailed, as a general rule
It depends, the one I just posted is Turbo
between turbo and LCM on sdxl, my results were much closer to 'normal' when i used LCM, especially when I added in my custom lora i've been working on
But that's using the Turbo Lora, so you could just do the same with any other model.
a portrait of a beautiful woman with intricate jewelry and intricate floral background.
it's likely highly dependent on specific models and other loras used though
Turbo seems to be a lot better at lower steps
except... the background is empty...
that's what i meant to say with it
But it has the added weirdness you have to work around if the images are more than 512x512
It can do more complex stuff with the right prompting
i see what you mean ... that's a basic portrait, but here is another example.. a woman in a lush tropical retreat with palm trees, sunshine, and ocean in the background.
the weight i used for merging turbo for it was 0.3
good stuff tho 🙂
using the lora in a1111?
comfyui
it gave me horrible results in a1111
Works brilliantly in Comfyui, a1111 is usually quite far behind
you have good experience on the merges, and im not sure why i miss a lot of the body below waist area to show properly with it
I think there is a new update today though, at least an RC anyway
Use full body at the end of your prompt, that usually works
what are you promprint for?
and get nudes: because "body"
Not had that issue myself
fully body shot of a woman in a lush tropical retreat with palm trees, sunshine, and ocean in the background.
you could try long shot, far away, that kind of stuff
long shot of a woman in a lush tropical retreat with palm trees, sunshine, and ocean in the background. she is wearing tank top and baggy pants.
i've bumped into this before with other prompts .. its possibly model specific to what i did with merges
absolutely
i dunno what area to look for to fix that
but aside that i dont think quality is shabby
given i merged turbo
btw eface the reason im talking about turbo merge cause i was under the impression that could result in better coherence too
and some of the images on realism came out with beautful faces
something that surprised me
this was my merge workflow for it
a beautiful girl sits on the grass, her long hair flowing in the breeze. She is wearing a casual outfit. the sun is bright on a clear blue sky with puffy clouds.
semi real
my ticket
i wonder if it's the booru tags or excessive use of comma separating every word gives the output an anime look w/o having to specify anime
wallpaper desktop worthy wow
I don't like the braided sidelock, looks too messy
but that ponytail curl tho
bpn
a beautiful girl, in an enchanted forest, sits barefoot next to a clear water pond on a moonlit night.
dark winter night with a full moon, a girl roams in a forest with a torch in her hand.
Thank you
Groovy image there too.
is there a discord server for Automatic 1111?
the rain falls heavy as a tiny frog finds shelter under a mushroom.
@nova remnant hewo 
Girl
Girl indeed

girls make the world spin
deep in the jungle, close-up shot of a girl, sitting on the steps of a cozy hut, as snow falls under the moonlight.
@nova remnant great lighting on all those last gens!
hey wyz thanks ~
also credit to eface for that model merge 🙂
nice didn't know, is it on civit?
yep
ty
🙂
ShikiXL, it's in the filename
Post full workflow
This just looks like it's being passed through the defective VAE twice. Download the latest version of the SDXL VAE from huggingface and it should solve the problem.
Oh, I didn't notice the sort of ghosting around the chin and cheek, there may also be a problem with the workflow causing the inpaint to not quite line up or something. The horizontal lines should be fixed with the VAE swap though.
Yeah, 1 problem solved at least. The rest could be a model issue, prompt issue, or workflow issue. I'd recommend posting the full image directly from the folder so that people familiar with Comfy can take a look at the workflow to see if there are any problems with it. I only use Comfy a little and don't use adetailer in it.
least buggy comfy workflow
try another image. try a closer portrait
What are the main stuff people use in their workflow beyond the bare minimum? For me it's add detail Lora, face detailer, and anime upscale.
Oh, and negative embedding
most of the older models are obsolete and full of mutations
miku loves nvidia
curse youuuuuuuuuuuuuuuuuuuuuuuuuu!
smallest 5090 variant
i like the hundos
prefer bananas tbh
not weird at all i just wanna eat my gpu
yeah prob shouldn't do that oops
this is better
Well.. I chuckled...
nice
she loves nvidia and money
she only has money and a pea brain so she bought a 6080 48gb card with only 128bit bus 😔
try to use high res fix ( idk how to do that on comfy)
LCM
nope
A merge of my own making 😄
Warcoal II : prompt: Miku Hatsune in a World of Warcraft Anime poster
yes
maybe I should publish this merge on civitai
ponders
replaced batman with naruto and went LCM
a new model that comes with animatediff
horror demon naruto
horror demon naruto
not gonna post anymore of those, they are getting.. shivers
ok gonna play some Starfield. nite
you can use postprocess to sharp the image,but the better way is to upscale the image and make in more steps
Well,maybe you can find some custom node to sharp
yep and you can try facedetailer too
is there any self promotion channel in this server?
beauty
im trying to do something like thsi but with weed and hearts and geometry shapes instead of money, and also a blacklight colour scheme
and also on sd1.5
probably used controlnet
no its just a handrawn style lora
@lyric zealot look at this noob
Not even 300 useless models that you don't even know what are anymore

my model folder looks similar, i wanna just delete a bunch of them but
there is some fun experiment you could try on img2img tab using controlnet
lol ... uhh, thats fascinating
I once asked for a list of models smol was using

my guess.. she prolly has selected about 5 ish
Oh yeah lmao
It’s not that many tho
i had it bookmaked but not an option anymore since i moved to sdxl
inside 
weird but very creative
ngl, i kinda like pixart, even if the quality isn't there yet
perhaps someone recognizes the style
girl hiding her face behind a fan, a whimsical image of allure and intruigue, by yoshitaka amano
ohh, good choice
looks so much like a hand drawing
that's tallgeese, isn't it?
i mean, i looks like a gundam series mech, for sure
but it gives me tallgeese vibes
almost all mechas from sd look like gundams prob because most of trainin imgs are from gundam
or maybe because real robots are like gundam
forgot ip adapter on
🤣
but i like it
some tokens were werong, but holy moly
far from perfect, but too tired to fix it lol
it's not connected, i'm doing fast gens
or do you mean theu are not sharp in general?
not what i wanted, but cute
soushiki
no
yep
but i suggest ft mse 840000
y
no idea
just noticed some nodes were rendundant lol
lcm, euler, or dpmpp_2m or 3m
depend
most of the models are trained in euler
that when they were tweaking on the models, (don't know the details), they usually use euler as a base
so, the model respond better on euler
even if it's very old
i agree
the details of the bg, the colors, are all fantastic
and respond very well on any lora i used till now
my workflow is a true frankenstine
i generate something with metadata, but it's still a work in progress, i'm fixing it
instead of nuking everything, i'm just adding nodes on nodes and never touch what works even if i downloaded better dones
so i have this mix of old obsolete nodes, mixed with new nodes
some were even connected in loop
i must have connected something wrong...
nothing, frozen
wow
cute face
but the shadows are weird
adetailer acting up?
wow
damn
i broke something....
yep
i suppose i should nuke everything and remake the entire workflow from 0
this thing is too much intricate
i know, right? XD
top right is ip adapter
in the middle, i have high res fix, than adetailer and in the end, upscaler
yup
assembled piece by piece
but now it's too intricate and i need to purge it
under the nodes, there are other nodes you can't see
try these settings for adetailer
should fix the problem of the shadows on the face
connected this node istead of yours
do you need the full adetailer?
k
i should go too
both cute
hard to chose
More steps maybe will help
Ok I will make more cloth coveing
obscene images are against the rules in this server
when a mod comes, you will get kicked out
so, plz delete it
Sorry for that, deleted
because sex is popular
i suppose so
i know just filter it out
even nudity is necessary for a stable model
without nudity, you will get foul anatomies

cant wait for sex 2 official trailer
ehehe
i learned anathomy from leonardo davinci sketchs
that guy was a genius
really mind blowing
For that youd have to watch the first one
Brain rot immediately turned my mind to fgo when I heard Da Vinci. The mind virus really is taking over.
i'm totally in love with the art and life of da vinci
my love for art is born with him
same
art is expression
just find the form better attuned with your soul to express your feelings
people can't do what they are not attuned with
they can learn the technique, but never make that art theirs
there an absolute difference from imitation and inspiration
nighty night
bye
JOJO!
Finally finding my footing again.
Although I need to download that new inpainting thing I got sent a while back lol
it's 5am for you, but 6pm for me 
i wanna sell me stuff as stoner posters but i feel like people "ick" at the thought of ai art
even though a majority of stoner posters are highly generic lmao
This came out a little sketchy but oh well.
i love her big eyes 
The eyes are a big improvement over what I did a week ago :))))
The only thing I'm messing with rn is making the face looking more mature
what is this about ... i downloaded that from huggingface page
*** Error verifying pickled file from C:\StableDiffusion\stable-diffusion-webui\extensions\sd-webui-animatediff\model\mm_sdxl_v10_beta.ckpt
*** The file may be malicious, so the program is not going to read it.
*** You can skip this check with --disable-safe-unpickle commandline argument.
I figured
I've discovered that I really like darksynth/dark synthwave or Dark Cyberpunk music
as it might also be called
like Biowave by Tokyo Rose, Comeback by Lazerpunk (doesn't get started until like a minute in so patience), 777 by Draven
Dark Synthwave is a great genre
This woman and her measurements are lovely.

anyone here managed to generate a waterfall out of the mouth? 
Im trying right now and it feels impossible
You either get a waterfall or someone with an open mouth
yes just photobash the waterfall then img2img 🧠
I mean yeah, but trying to generate it from scratch rn
i tried to generate the tiny miku vs giant gpu but couldnt i guess there are some things sd struggles to understand
Frkn nightmare fuel
Also batch size seems broken in A1111, generates one image with the prompt and the other 3 without it seems

Setting batch count to 4 works tho
why are sometimes images blurred on dreamstudio.ai ? It's not that they were very inappropriate and removed entirely, they appear as blurred and I can't remove the blur
but I can clearly see behind the blur that there's no nudity
I mean I get this crap
Maybe it gets falsly flagged? 
The bot here does that too sometimes
but then it would be removed
not blurred
They still charge credits for blurred but I can never unblur them
dalle can get waterfall but it always put a tiny miku inside mouth
It write a support email if I were you, cause removing credits but getting no output sounds kinda sus
Oh right I can try dalle
I don't want to pay for that. I won myy dreamstudio credits when CoW was around
I mean you dont have to pay to get support? At least id think so
now it works better
Have fun, I enjoyed my 80 hours in 2.0
Dont see a reason to play 2.1 now unfortunately


which one do you like better in comparison, they used two different vae
actually let me use same seed for better visual
I like the second one more, looks more saturated
me too
i like the one with broken hands
that was with https://civitai.com/models/152040/xlvaec altho the author puts that into ongoing development
shared by @whole portal 🙂
this sdxl vae variant is like sd1.5 anime vae
got this with that new vae while playing with animatediff
Gifs just suck color wise
lol yes
the mp4 didnt come out too clear either
i think it could be the settings
Yeah image clarity is another thing, but gifs are reduced to 256 colors I think
Which aint a lot
needs more inception
exactly
gif is not an option
but i went with it ... first time trying out animatediff
Only advantage is size and it loops
Try the VHS video combine node
If you arent already
Are you using comfy?
using a1111
Ah well 
steven loves miku .. has a secret crush
i love this vae
the whole image composition looks so much brighter
a girl in a futuristic cyberpunk setting, with neon-lit skyscrapers towering over her, stands on a street adorned with holographic signs.
my checkpoint merge is broken
it goes all the way and fails on saving the newly merged file
TypeError: argument 'metadata': 'dict' object cannot be converted to 'PyString'
are you using the a1111 merger tab?
yes
if you open the metadata part at the bottom and uncheck 'save metadata' it'll save
i don't know how to actually fix the metadata though
let me try that suggestion of yours
merging now
i looked up that bug, they dont have any fix for it yet
but if your suggestion works im happy ... lets see if it can save
awesome it worked thanks 🙂
i would support that decision XD
looks great
dalle interprets prompts really well
but i still like SD image textures better
dalle can't make cute faces like SD
his gens achieves a new level of curse XD
Generic anime face 
but sweet
one of the reasons i was hesitant to play with sdxl before is when most trained sdxl models initially didn't come close to sd1.5 cute faces
cowboy shot gave her the cowboy hat ...
beautiful girl, dark hair, gray eyes, open jacket, shorts, outdoor, bokeh, cowboy shot
hat in negative .. easy quick fix
the next a1111 update coming out soon, will address those prompt coherence issues
squish
@wooden coral let me know if it's considered nsfw

i would embrace reality and life's natural beauty
the implication of suppressing feminine beauty can result in negative energy
this merge came out interesting
im kinda going crazy with booru tags on sdxl lol i think it lets the ai decide for itself what to do with all that word options
i deliberately prompted this
pretty face, girl, long bob cut, red hair, tank top, skirt, huts, plants, flowers, outdoors, lampposts, pond, butterfly, rock, puffy clouds, earrings, necklace, sitting, sneakers, evening,
this is the result
what did you do? ^^
made it an anime model?
not entirely anime, its still got the versatility but i merged it with another versatile model and the results are pretty sweet




