#🍥|anime
1 messages · Page 166 of 1
definitely not going to fit

its done lol
the oven has big opening to its right
True
Top part looks awfully round >.>
btw im using a model that i merged with 3 different other anime models :p
How do I apply to become a kit kat

just be
dont think
once you know that secret you can be the kitkat
i wonder when nubby will finally start playing with sdxl
im not going back to sd1.5 now
in fact this is my a1111 checkpoint now
I have a bit. I'll do it more once there's a model that's as good as 1.5 models at existing characters.
you know yo8u can make a model thats good
especially with the speed you get now using sdxl you can train w/ far less effort
Quality wise, sure. But if I can't make all my touhous without needing a bunch of character LoRAs then I'm just gonna end up back on 1.5.
And I don't have the energy to figure out training XL.
It's way harder to train than 1.5
And I barely even train 1.5
you're looking at sdxl from dev pov, i was looking at it from user pov, and i kept going back and forth with gunuine dislike for sdxl for how slow and lacking it was but that all changed with lcm lora and turbo
At the resolutions I gen at it's never been much slower than 1.5 for me. XL slows down less at higher resolutions than 1.5 does and basically everything I gen is 1080p after highres fix.
because u only use it for generic characters,for anime characters theres no loras for XL
i think i'd be honest to say i now get better outputs with sdxl in less time than with sd1.5
now make Momonga on XL without a lora
idk what momonga is and why should i?
prob cause u are in an anime channel?
so?
i dont have to make all that anime character but given the curiousity im sure people can do it
sure,when they can train the thousands of loras that 1.5 has im sure they will switch
sd1.5 didnt happen over night
and you'll be ignoring the dev process of sdxl if you dont acknowledge the progress its making
Booba is all you need

yea they been sayin that for what? 6 months maybe they are waitin for A100's to drop to $600 for them to be able to train
I hate needing character LoRAs for moderately popular characters. Even if every character I wanted to gen had an excellent XL LoRA, I wouldn't be happy.
no im actually happy a100'S are worth like 5k
haha
ok well i think sdxl has taken a turn towards the right direction with all thats going on lately
Why
maybe SDXL turbo is cheaper to train ?
No, you don't train a distilled model. You train the normal model, then distill it.
I'm no dev, I just hang around a lot of people who are.
@native halo where are the body suit gens

itd be nice to encourage nubby to get on sdxl and we might see more progress coming
no bodysuits today 😔
he would probably join once we are able to train on a consumer card🌚
i like how you feel for the average user, im one too
thats why we need a new img contest with a couple of A100 as price for the winners
sure but i'll stay away from that, i dont like competing
these anime characters are cuter than from sd1.5
i tried generating girls playing tennis on sd1.5... i got that horror of hands

Hands 
look at these aesthetiic hands and legs on sdxl
all the sd1.5 models are now idling in my backup storage
Floating net x3
the pole is invisible
but its there
you just haev to touch it
High tech stuff
Very safe for a sport

the hula hoop is bit tricky
you know i was attempting for sd1.5 quality with sdxl cause the overly glossy sdxl images didnt feel natural, now with the options to tweak it i think sdxl is giving lot better results
the sdxl coherence is a big and major point over sd1.5
which got even more fine tuned with lcm lora
and at a speed you dont get excuse to not use sdxl
seems like some else generated something similar to what I got from wildcard
made of light works
the light was weird for me, i wanted a solid plastic circle
im seriously glued to sdxl 🙂
you have 12gb vram right? 
yes rtx 3060
that's why
i was trying for nubby to play with sdxl too
i only have 8gb vram, and sdxl is bad on auto with 8gb
with his knowledge he can do some nifty stuff with it
oh ouch
i thought you had 12gb vram too
oh nubby fully swapped over to SDXL as well? 
no he hasnt lol
nice 🙂
probably getting 4090
oh wow awesome
then i can probably gen SDXL stuff with speed like how im genning SD1.5 models
i had some difficulty adjusting to sdxl before
turbo on my 4090 is doing like 3 frames x second.. at 1 step, doesn't look great like that but merging better models and going 5-10 steps you are fast and looks really cool
- slow render time
- outputs are kinda generally too glossy
people are now getting live generation on 4090 and it's crazy

after merging some anime models i've overcome the glossy texture
wyz thats why im using lcm lora more .. 8 steps, 2 cfg
tbh, the greatest perk sdxl has, it's the context and knowledge
totally thats the reason i kept switching back and forth and finally settled with it lol
nice
great place to heal minds
im actually surprise that they did a SDXL turbo and not SD1.5
they finetuned sdxl at 512px
you get better results with 768 and 1024
actually emad made a post saying 512 would give a bit weird effect for turbo
hmmm, for sdxl model, it's usually using refiner and not hires fix right?
nope

no refiner needed unless you want to train a model with base and refiner
and i cant do hires with sdxl since i need more ram
that means you are getting pics at like 768x768
but even with 1024 or 1500 images are good w/o hires fix
or 1024x1024?


a lush island with cascading waterfall inside a glass jar with tiny king kong inside
lol how do you like the context
it's great, it's so much better than 1.5
yep
dalle has great context too but far less control to certain aspect
i feel i can use sdxl any way i like unlike dalle3
true, and the restriction on dalle3
No monke 😔
token limitations then some silly censoring
from my very limited testing of dalle3, it's context knowledge is crazy tho
neat 🙂
seems like 1.5 doesn't know what king kong is...?
kinda cursed but here with sd1.5

some sd 1.5 models can do it
i think nubby used one last time we were rendering jars lol
Man, novel AI new model looks neat
yes
bleh
Cursed
oh man .. king kong back there
and look at thos tiny people below on the shore
smol sus what you rendered and this one with jile .. sd1.5 has its perks
and with better coherence with sdxl you can be more creative
btw i was using t2i controlnet models an hour ago
they are very small in size and works great
compared to the 4gb or 2gb CN models
i made extra 10gb space on my ssd after removing all the sd1.5 files

an elephant standing on its hind legs, and reaching out for an apple with its trunk from a tree above
i had <lora:lcm-lora-sdxl:1> (anime:1.2)
or i could make it more realistic
injuries
oh no
I'll bring her to my house
to treat those injuries
👍
surely it's to treat those injuries
@wooden coral @gritty spruce ^ #🍥|anime message
@dull jackal @finite herald
#🍥|anime message
OUT! thank you!

@gritty spruce another one


ty!
the spambots are crazy today

they are slowly activating their script
thank you
Tactical girl time?
i literally just changed my prompt 
cute
can't really tell if there's a difference
I missed ye old sammich, didn't I?
angelic bride 🤍 🤍
looks like realistic game world 🙂
hopefully this isn't nsfw 
very cool, i wonder how you got to do that
here, with metadata 
i should just delete the old one since it's so close
thanks going to look into the data
i thought that involved some complex lora and controlnet trick
i'm a simple man, i type my prompt and press generate

?
used this line white hair, long hair, japanese yakuza, bare back, full back dragon tattoo, piercing, head tilt, traditional house, upper body,
and got this
lol idk
or maybe cos didn't specify gender
a girl with bare back, she wears a dragon tattoo on her upper back.


take what
at 0:14: Pop these balloons like a silly ||REDACTED|| https://youtu.be/mPMwrnmjJGo?si=Qg-GF9Eed-zyULIO&t=14
BUY FLYINGKITTY PLUSHIE HERE:
https://makeship.com/products/flyingkitty
SCUUUUUUUUUUUUUM SCUUUUUUUUUUUMM...
MERCH ► https://teespring.com/shop/flyingkitty-big-smoke
Patreon ► https://www.patreon.com/Flyingkitty
Discord ► https://discordapp.com/invite/flyingkitty
Twitter ► https://twitter.com/FlyingKittyy
Facebook (inactive) ► https://www.faceb...
Vietnam flashback

1:49 shout out to my dad but I'm fucking adopted

The sentence mixing is nice
and 1:22 - Moo moo, cents 50
xD
huge balloons
things in jars big fan
Those women are quite strong. 😮
When you time travel and everyone looks at you:
Does anybody have an idea how can I take any anime art and change character’s face similar to the real person?
I’m using web ui
loras, make or find a lora of said face if possible
then use the lora and inpaint the face onto the character, or try to generate the face naturally, but id rather generate what i want and replace the face for guaranteed results
Thanks skelly. What if I want to use my own selfi and make a like anime photo out of lora. Can I do that?
well lora are mini models basically, so you can use an anime based model, and use a lora filled with a bunch of your faces and that should do the trick, youll probably have to tinker some things as anime style means a loss in details im pretty sure
editing your faces on the anime images would jusrt reinforce the style, so if you wanted the specific body of a char then perhaps
Basically saying, I wanna generate naruto for example from Lora and then change face structure so it will look like me referencing my selfie
I tried doing it with controlnet, doesn’t work well or I’m doing it wrong
im not sure on the specifics, im still trying to learn how to make loras, id ask in #🤝|tech-support probably
i just know basic stuff
Got it, anyways thanks for the help 
heyo
so cute
speakin of shirts 👕
what model did you use for that?
He used this one https://civitai.com/models/211628?modelVersionId=238399
Modl It make da anim g irl https://huggingface.co/Aotsuyu/Soushiki Previews with no adetailer, loras or edits
That is a witch lady.
yep, he used one of my prompts for the cover image.
I did lightning and fire themed ones too.
Witch I like, really.
Yeah 😂
@twilit portal If they are well-endowed, they are definitely strong in a physical and/or magical sense.
so cursed
Greetings, i am new to SD und i created a image with 904*512 - but i want it to be in a 21:9 format (at the End 3440x1440)... but when i change the format of the image, a hole new image appears... is there a way to get the same image but in 21:9 ?
fingers getting so good you actually have nail polish on her nails, now make bare foot girls...
you'll be making proper fashion models
I don't remember if I ever posted this one here
perfect feet 
It had minimal edits to get to that point.
editing is not allowed, i mean sure but the point is getting the sd gen to a level of perfection
its ok it doesnt hurt 
Both feet were already perfectly formed. Her right foot just had an extra blob of flesh below the toes and her left ankle had an extra bump.
thats what i mean
in my sd1.5 saga i rarely got perfect foot, i haven't bothered much with sdxl
but sneakers were always perfect
the sdxl model i use doesn't go below knees
Feet are significantly tougher than hands on every model. Many images are portraits which don't show feet, and outside of specifically foot focused images the ones that do show them are full body shots which means the feet are small and then on top of all of that, most images that would have feet, have shoes or at least socks/stockings on.
it may not hurt only cause she looks cute
yep
ahh
also cute
if she bites it'll feel like a butterfly landing on your shoulder
this one came out with bad teeth 😔
come to the other side... SDXL
i say that with considerations for low end gpu btw
there are people who may need to use sd1.5
i dont wanna be insensitive to their fun
i probably would but i need my characters 😔
perfect lil cute vampire
you'd actually want her to bite you i think
she is so cute if she can't bite you'd wanna give her fangs
anwyays lol... im just goofing around
we have to check fangs first 
just a 1060 i can run the turbo one and i dont mind waiting but i dont use it cause it doesnt have all the anime characters that i prompt
but he likes sd1.5 girls more atm
yes thats a bit of lacking with models now, which is why turbo and lcm lora are important to encourage developers to contribute on models
i got some pretty epic faces with realistic photos using basic sdxl model i merged
and it works both on anime and realism
dont look at neck 
but you know what.... the coherence with sd1.5 and sdxl are vastly different
sdxl adheres to context so much better
i think with sd1.5 there are lot of accidental beauty that makes up for randomness of the image
but with sdxl we are getting to point to only speak our thoughts
beautiful pair of hands to match her face
of the 100 imgs this model got like 65% good hands
sounds fair lol
actually that percentage is way bit more fair compared to what i got with most sd1.5
probably depends on the model and also pose,the hands on own mouth pose is prob too hard for sd and causes deformities
surely cause even with letting sd generate pose loosely i got maybe 30% good images out of 100
that image you posted just now, even her knuckles look cute
ill post some of the bad ones 
im wanting to do some image gens but im too distracted by youtube and asmr videos
there are more but ill only post a few

yeah most of my pic looked like that on sd1.5 ..
constant delete was part of my workflow lol
and some of the images the face came out so cute it was difficult to delete the bad hands
cute miku with her mouth open
im using untrained model, its generic
but the model you are using is fine tuned
for anime
I saw marisa feet I already knew who posted it before looking user name
btw with sdxl you may need to narrow in on the context some times but its almost less likely to get deformities
for example here im not getting what i'd want and i'd have to fine tune the prompt, but the image itself in general isn't bad
try with (own hands on mouth : 1.3) 
seductive girl with side ponytail with her mouth open try with (own hands on mouth : 1.3)
first one
let me gen a couple more to see how it goes
slight anomaly but nothing to harsh
3rd image is better of those
about fingers i mean
yea all 5 fingers 
the other thing about sdxl base is that its not too focused on anime and the resources it takes is hard to train anime models
but so far with recent developments things will likely change 🙂
try this cute miku playing electric guitar, she is excited with joy.
i'd guess the fingers will go nuts on sd1.5 when playing guitar lol
i had such difficult time msyelf when i was using sd1.5
im doing the 100 imgs for (feet,from below:1.3) 
lol thats hard work given sd1.5
🦶 
one feet came out with 6 fingers 😔
deletes her 
let me run that on sdxl
from below,1girl,solo,hatsune miku, soles,barefoot, feet, looking at viewer,
ooh booru tags, but lemme try
first one is nsfw, let me put nsfw in neg
thats with your exact prompt.. 2nd attempt
at least feet were perfect
her hand got messed up btw lol
more feet = better 
im surprised how well her nails came out
pov u are an ant
6
Got new computer testing new settings
@native halo
forgot it
big settings, its looking good
i like the sneakers 
Try adding foreshortening. Should help to make their feet look more like they're bigger because of perspective rather than just looking like they're too big. foot focus might also help.
Nubby knows everything about feet 
feet expert 
feeticist
I might have genned a few of them
@lyric zealot
go gen feet too
(I would like to review them, just to make sure its good)
The vast majority of them aren't even remotely lewd. Just touhous soaking their feet in the stream.
imma need proof of that 
beautiful feet isn't lewd lol
just so i can, like @nova remnant said, review them

everyone goes to horny jail
my sd been awfully slow
so much its timing me out I'll ask support if somethings up
timing out ? like broken?
I'm using a service
4gb isnt awefully bad
if the thing can't generate in like 10 minutes it aborts
you should be ok with 4gb and --lowvram
not sure why its like this
also my pc cannot do hires
i ran my 4gb with --medvram
I gave up on it 
do hires of 1.5
your free trial is done 
Theres a big difference between anything nvidia and old amd
What, you haven't seen enough variations of this prompt yet?
ohhh damn.. i forgot you have amd
actually i have 
I haven't. I should probably make some more 
forgive the other leg
That's one that you just crop off the bottom few pixels to hide the bad toes 
steven made a post with perfect nails
i have some issues with sdxl model im using cause its not too well trained, but i think with several tries i can get good nails
There's an Adetailer model for feet. Believe it or not, I do not have it.
really?
Really to which part?
It's just a custom model you toss in the adetailer folder. Uses the same extension.
where do i find that, so that i can avoid it? 
sounds interesting, do you have the link you could share?
They're apparently pretty easy to train and can be trained on basically anything.
On civitai I think.
finally I'm up from 6gb vram to 12
disgusting, imma avoid that 
I've yet to find a way to make use of the extra space adequately still
more vram, means you can probably train stuff now, and also gen at higher res
google isn't giving me any relevant result on adetailer feet
I heard that over 768 is messy in 1.5
I've always been doing 512x768 x2 upscaler with my 2060
But I'm not sure how to take advantage of my new 4080 in upscaling without it looking a little funky
you should use sdxl with that new card
Link is at the bottom of the guide https://civitai.com/articles/1224/training-a-custom-adetailer-model
thanks, checking it now
Are we posting feet
Much like the hands model, it's probably not going to help you get more feet that are good, but should help with getting more fine details on the already good feet, such as toenails.
Always 
Haven't touched sdxl mainly because I have like
50 presets saved on sd 1.5 but if the interface is the same I might try iti
The only pain is finding some good new models
Since I've been relying on cetusmix3.5 forever
this is an amazing guide, it starts with training method too, but i could also just use the model linked below?
Most modern models can handle 544x960 without breaking a sweat, which is convenient because 2x upscale puts that at 1088x1920 which is as close as you can get to a perfect 1080p image from SD.
UI should be same if you are using either a1111 or comfy, but model is that crucial part, there aren't as many as sd1.5 due to the level resources it takes to train sdxl
Yep they made the guide for people to train whatever they might want and posted the foot model that they used as an example.
But its the models I guess that gets to me
great... i will have to try that for aesthetics
I wish for you to receive many very nice toes in the future
A lot of what I used to do with my 2060 was just post edit. (Example)
upscale x3 gives me the dead inside eyes lol.
i looked at their samples in the link, you know sdxl can generate pretty decent toes in comparison, although im sure training would make a big difference, maybe they have basic samples uploaded atm
The adetailer model is just identifying them. It doesn't affect the quality at all.
Any mature looking models that you'd recommend? I've been using my current cetusmix (3.5) because it gives a somewhat more mature look than whalefall does (at the cost of some consistency)
ahh ok, i think you should use sdxl 🙂
@toxic dragon if you are doing production level work you'd have to put some extra effort getting the right images, and with realistic photos its very obvious to tell if images are AI generated or real. but that changes the game alot with sdxl
This is currently one of my favorite models. It might fit your needs. https://civitai.com/models/211628/soushiki?modelVersionId=238399
Definitely not going for realistic but definitely anime
sure but even with anime you'd have to put extra work on sd1.5 which is not as good as sdxl in coherence
Tried the recommended 544x960 its a bit more chaotic than 512x768 on this one
If you mean spending way too mcuh time for good images then yea I get you on that
basic coherence
those two engines are vastly different regardless of time you put in
?
poster quality image !
I've had better from that same prompt but with scythe instead of polearm.
i think all well trained sd1.5 models have achieved a commonly likeable sweet heart face
Nah that face is mostly deliberate because it doesn't rock the boat while testing other features
Since I'm testing outfit, hair, bow/ribbon placement
not talking about that one altho that face isn't bad either
im checking out posts on civitai
Grab PNG info off this image and try my parameters and negative prompt. A lot of people overdo their negative which hurts models that aren't really overfitted.
Most people do. Try that one out for a little while and see what you think. If something is popping up that you don't want with a specific prompt just add that thing at the beginning while running it.
Wildcards going wild
where feet tho
There.
improtant for SDXL users!!! all checkpoints can be used with turbo tech
https://www.reddit.com/r/StableDiffusion/comments/1888j8a/all_sdxl_checkpoints_can_be_used_with_sdxl_turbo/
bad fingers but
Tried Whalefall with some tweaks
And now ribbons act up sadly.
At least it looks more mature now.
nubby you should get into poster production, those are some pretty amazing images
whats the point of having highres in prompt?
is that supposed to have effect on canvas
or image detail
idk i dont use it neither masterpice,best quality etc.. but some models recomend u use either of those quality tags
yes masterpiece may be necessary for anime models
i use (highres, highly detailed:1.1), aesthetic, masterpiece
thinking of removing highres
lol you spoilered that, wonder why
it didnt came out with the denim shorts 😔
:p
this one came out with deformed hand 😔
her face is the winner 🙂
i'd like to have cute anime face like that on my sdxl model
to elaborate on the cute part ... she is innocent and hot
sd1.5 🙂
face like sunshine in the sky, are you using LoRA?
no almost all faces are like that with this model
nice.. thought you were messing with LoRA, i have to check if i can have LoRA on sdxl for similar look
merging a few realistic models usually gets you close enough
heck thats interesting, didnt know merging like that could do that
i think i have a asian realistic model for that
xxrealstic or something
@native halo What about some magic
i like that big ball 
ah yes, the big ball...
just to make sure, you're talking about the one in the top left, right?
do you suppose 60% anime and 40% realistic a good try or .. much less on realistic model?
sounds good, give it a go
cool, time to download that model
merging won't take that long anyway
try a few different combos and see what you like
something's wrong with that pinky toe
small
here take this big one instead
hello there


differnt mod but they didnt focus much on the face
that one is with reproduction
this one is with bluepencil which also have reproduciton in their models merge among countless others
face looks bit better on bluepencil
think i will cross mix bluepencil with asian model
how do you merge LoRA with model on a1111?
or is that even possible?
with supermerger
whats supermerger?
degens! 😂 we're going to have to call the police 😜

keep it safe please... blur ; )
so supermerger is an extension and usable by a1111?
nobody fear da police keep posting! just spoiler blur the sexy/horny stuff 😜
yes its @ a1111 extension
hi wzy, i hope you are having a pleasant day and like the beauty of life 🙂
hey.. yeah day going fine, tons of work
gonna look into it ty
i think u need 32gb ram or more to load a sdxl checkpoint on supermerger but idk if its just for merging checkpoints or it works with less ram if u just wanna merge loras but give it a try to see
oh gee, ok, i have to check, i have 16gb at present... so no other choice
yea i dont remember if its 32gb or 64
how to install that ? guide me pls
just go to extensions>install from url > then paste this https://github.com/hako-mikan/sd-webui-supermerger and install
I'm a new SD, so Idk how to use @@
read these two guides ||https://stable-diffusion-art.com/install-windows/ || and ||https://civitai.com/articles/904/settings-recommendations-for-novices-a-guide-for-understanding-the-settings-of-txt2img ||
got it
hmm the realistic asian model i went for cause of great quality with sd1.5 their sdxl version came out poorly when rendering images with it
and i don't see many xl realistic asian model on civitai
blemishes always dont mean real lol
her eyes speak
Thanks so much.
BEAUTIFUL!!!!!
save my pc 💀
while genning or?
yes, but I gen in 90 step and the image resolution at max 2048x2048 and it broke at 90/90 💀
are u meaning this ?
or what ?
no, im using SuperMerger
I think both
okay, firstly, if you are just getting started, i think try getting something to generate art first, like automatic1111 webui
unless you already have other ways of genning art
I used to use txt2img before. Im just try using SuperMerger
ahhh okay, i thought you were trying to use SuperMerger to generate art
lmao
then i can't help you with that, since i never use that before
good luck tho

I did 💀
ahhh okay, i get what it's doing now, it's merging and genning art at the same time, so you can save the recipe of models you want
SuperMerger is meant to create new model mixes and do gen previews and reason why your ram was so high was probably because you loaded 2 or more models at the same time because you were doing merge
SuperMerger is like a1111 checkpoint merger but more options
@elfin valley If you are new I wouldn't recommend using SuperMerger
honestly, I'd adjusted the max resolution into 3840x2160 and gen it that make my ram was so high
💀
yes sir
Ofc you are free to use it but it's meant for creating new model mixes and not generating images
This art had used the purchased lora ?
what do you mean? 
You can buy free loras here
https://civitai.com/models
are u using paid lora ? or just use prompts ?
I don't think anyone here uses paid loras
here's the pic with metadata
the lora i was using can be found on > #🍥|anime message
of course, but I dont get it💀
what is metadata ?
many prompts ?
Vil, I'm counting on you 
- Save the image
- open pnginfo tab in webui
- Locate Smol Sus's image and drop it to pnginfo are
Should see something like this
not all my pic have metadata tho
I should just stop being lazy and copy from folder

from now on, I should try my best to upload all pics with metadata
If found any without, please lmk
I got it🐧
look wild
what does copy config from imply in checkpoint merger?
i mean there is 0-1 multiplier for model mix
@lyric zealot when I use Hires Fix and upscale by 2
my res of art is improved by a problem happen is. it created another one 💀
how to fix ?
what's your generation res?
try changing your denoising strength to 0.51 or something much lower than 0.8
and also, not sure about upscaler LDSR, but DPM++ 2M Karras is a good one to start with
wait wrong, that's the sampling method
lmao
https://openmodeldb.info/ you will wanna get some good upscaler here
and, you can turn off refiner, since you are using the same models for both, so it's actually the same thing
when using this lora lora:SIC_outline_v1.01:0.6, it should just be in your prompt, and not in negative prompt
your cfg 12 might be too high, without extra extension, i won't recommend going over 10
I forgot remove it :v
usually you don't need to have that many steps for hires fix. I usually use it at 10 steps for hires fix, and 20 steps for generation
I should probably consolidate all those messages to a single message but oh well

🐧

can someone explain this equation for tertiary checkpoint merger?
A + (B - C) * M
M is the multiplier of value 0 to 1
A is the primary model and B is the secondary
A: This represents the primary checkpoint, which is the base model that you want to modify.
B: This represents the secondary checkpoint, which contains the additional information you want to incorporate into A.
C: This represents a tertiary checkpoint, which is used to remove unwanted information from B before adding it to A.
M: This is the merge multiplier, which controls the strength of the influence of B on the final merged model.
Here's how the equation works:
Difference Calculation: We first calculate the difference between B and C. This essentially removes any information that is present in both B and C, leaving only the unique information in B.
Weighted Difference: This difference is then multiplied by the merge multiplier (M). This allows you to control how much influence B has on the final model. A higher M value will result in the final model being more similar to B, while a lower M value will have a smaller impact.
Adding to Base Model: Finally, the weighted difference is added to the base model (A). This results in a new model that combines the information from all three checkpoints.
In simpler terms, this equation allows you to selectively add information from a secondary checkpoint (B) to a base model (A) while removing any unwanted information using a tertiary checkpoint (C). The merge multiplier (M) allows you to control the balance between the base and the secondary model.
Here are some additional points to note:
This equation is a simplified representation of the actual merging process, which may involve additional steps and calculations.
The specific values for B, C, and M will depend on the specific models you are using and the desired outcome.
Experimenting with different values of M and the choice of B and C can help you achieve the desired balance for your specific needs.
I hope this explanation clarifies the equation and its role in tertiary checkpoint merging. If you have any further questions, feel free to ask.```
i asked bard for that
i wanted human touch lol.. but ty
i have bard open in one tab but was feeling bored to ask bard lol
was messing with checkpoint merges for couple of hours now :p
where the folder which I put in ?\
sorry, i should have recommended some for you
all of these are pretty good for anime
How to use or just Upscale ?
in hires fix


bluepencil xl has like 100s of model merged into it
crazy
i dont see the point to merge anything with it
only thing that makes sense to merge is the turbo xl
and that just for the sake of better coherence
is there a limit to how much variation a model can have?
if there is no algorithmic limit a model can contain all kinds of possible variation
then its just a matter of poking that model with the right trigger prompts
possibly, but then i think all concepts that the model knows will be a little diluted?
not diluted i think
it can pretty much cover the expanse
but that would come at a cost of less generic prompt

i think its good
you can have a paramater of generic prompt not just overly generalizing them
look at some of the sd1.5 prompt patterns, some of them are completely off the generated image
meaning those models are not coherent specific which sdlxl does better
regardless of possible variation in this case
i made a merge between two realism focused sdxl model and managed to generate fairly decent anime image with that new model
all i had to do is put in (anime style) as prompt
what seems to be the core reasons for removing one from the other in this sampling dataset?
if it's just showing the difference that doesnt make sense to exclude one set of imagery, cause neither of the images are discardable
btw, the images im generating there seems to be difference using anime theme, anime style, anime 👀
using the same seed and rest of the prompt
visible difference in subject's posture
as if word tokens are affecting the output
what if i put made up gibberish for words
yeah every meaningful or meaningless token of words influence the output
booru tag kind of made people less descriptive which is limiting the users getting the most out of sdxl
using a prompt cat doesn't describe the cat
i think theres a sd non xl turbo model
its for sd2.1 i think?
not sure if 2.1 works or if it will take 1.5 loras and stuff
2.x models can't take 1.x loras. The models were generally also worse than 1.5 models despite the architecture being better on paper.
thats the vibe i got
adetailer is ruining some faces with SDXL models
what setting do you use on adetailer?
only the denoise strength that i set to 0.3 intead of 0.4, but that might not be the reason, i think i got some XL TI that could be conflicting
oh, auto1111
does increasing the detection confidence threshold affect closeup portraits?
default was 0.3 which i changed to 0.82
well, a portraits require a bigger mask and so, a bigger hook
going to switch it up and see what i get
Are there other good discords dedicated to ai anime?
dunno, pay attention to channel sharing porn and virus
detection threshold only affects whether the faces are found or not. If the faces aren't being found you turn it up a little. If rocks or other objects are being detected as faces then you turn it down a little.
something's definitely messed up, when i enable adetailer with sdxl its messing up the face with jagged lines
Touhou Project AI is good (and not only focused on Touhou)
with a too little threshold, you even get partial hooks, sometimes i got only hair or half of the face hooked
can share link in pvt?
let me give an example what's going on ... i will delete them since they are not anime, but just for sampling
the settings i changed with adetailer are only detection threshold and denoise strength which SHOULDN'T mess up like this
that's left over noise
yeah, adding more steps maybe?
you mean steps in adetailer?
i didnt have that problem with all the other images i was generating but let me try again
yes i can
adetailer has entirely separate section to custom set all the detail
im using LCM with 8 sampling steps and 2 cfg, which you saw the good image i posted, and when i set separate adetailer steps and cfg by increasing them to 30 and cfg 2 that gets even badly distorted
share the result

everyone







