#🍥|anime
1 messages · Page 25 of 1



this one burnt too? cause I'm beginning to think my monitor is fucked
it's more saturated than others, that's for sure
but is it bad in that sense, not in my opinion
ok I think I found a way to kinda show what I mean. I turned contrast way up and brightness down for the first image, second is the original. do you see those things at the edges?
first image?
first image from the 2 I sent
but what's that from?
cya smol
cya smool
from this

uh where there
I tried same thing on high and low cfg images and it does a similar thing.
youve zoomed in so mucuh
the edges of things have this stuff
to show it clearly. it is like that on most of the image
the skeleton?
hmmmm yeah maybe there, dunno if thats upscale or original
but wait
how'd it get that dark?
I changed brightness and contrast as I said
I don't really see it
I do
tetrachroma?
You mean on the edges?
like the edges here
would I have to zoom in a lot to see it?
Damn... You really are staring at it, huh? I really don't see it properly unless I really zoom in
now I see it, when pixel level
the ones on the skeleton yes. but some other ones I can see clearly without zooming
this example I see clearly with no zoom
Anyone here familier with blender posing thing? :s
I dont know where that is
lol, maybe it is. but it just automatically feels like high cfg for me
never tried it, too lazy for that
below chin
what part am I supposoed to be looking at ?
now, it's not like I see every single line here by itself, but together you do see it
the part I used in first example is here

I told you like 2 times already lol. I changed brightness and contrast
if you shift brightness on most images that aren't color coded for HDR or HDRI, 12bit etc, you'll end up with weird things
yes but changing it kind of invalidates it all
bro I see those lines on the edges on the unedited image too
unless you see it on the original one
the contrast just shows it more clearly
eh I can't see it
is it the edge color you're not liking or the color of the whole thing?
I see chromatic shines
like exposed metal in the sun
where the coloring has been stripped
only place I see deviations are around the chin, nose and lower jaw portion
deviations that can't be attributed to anything but a render fault
oh hmmm I shift my monitor settings and on some monitor settings I see it (in particular gaming mode)
and on artist mode or HDR HP Enhance+ etc I don't see it
I did my best to match the saturation and brightness. if you look at the hair I think most people can see it, though it is all throughout the image. (comparison of low vs high cfg)
I suggest opening them fully and not viewing on discord
which is low?
can you not tell?
one of them is more even, the other is harder
overlook that
look at the edges of the hair for example
listen, I think, if I am the only one that sees this, then it doesn't matter if this "burnt" effect happens or not.
I mean I think you're the only one that will change brightness, saturation, hue and whatnot to see it more :p
but nothing is burnt. But I do see artifacts in some
i mean its pretty obvious right is high cfg?
I don't know the effects of high cfg, I've never seen em compared
so no it's not obvious
I've never ran with high cfg
🤷♂️ art is subjective anyways, what I got from reading yours convo is that one thinks it looks burnt but the other sees it as chromatic and iridescent
I see it normally, the changes are just to make it easier to see
I dunno if this means my vision is worse or that my vision sees more colors and can see a clearer gradient
as for image saturation, yeah mostly my model does dark gothic fantasy or horror and such
so I think even if it has been made more versatile, it still has those lingering styles
and compositions
overlook the brightness and stuff. do you see those things on the edges of the hair? those are what I mean
aha
how big is your monitor or how close to it are you?
cause maybe that's a factor
of why I'm not seeing it lol
also those edge factors relate to gradient errors
This is the length
But since my eyes focus on stuff it feels more like this or even a bit closer
sorry this doesn't tell me
lol
I'm arms length from mine
a little more
27" at a little more than arms length with hand fully open
maybe I should adjust my monitor color settings
I'd like to get a better layout
and is yours IPS?
I'm saving up to get an OLED one, cause there just won't be anything better for drawing, 3d, media etc
how do I check what screen I have?
the size?
no the name
advanced display maybe? or display settings in nvidia control panel
I turned off windows HDR, seeing more details now
damn that AuroraOne model is good @quick hill ( #1098526323015680051 )
the first preview image though is still looking gothic to me
not burnt
I need to rerun a few upscales
and maybe reupload
also @brittle jay ... BURNT?!
thank you <3
no, thank YOU !
🥹
this one not too burnt actually, just some weird artifacts
I mean like, this image for example is practically not burnt at all.
I just mean that a lot of the preview images do have that effect
yeah it's not like I picked the finest of the bunch
on that bloody one
the house though I like
very stylish
it might also be cause I used human upscale model
on drawn
also gonna remove fast encoder and fast deoder from tiled vae
since it can alter color
@quick hill my pow was done using aurora, its a great model 
that's awsome! 😭
all
xd
I think this test might be stupid
I see 44 :o
I see 39
lier
Theres 44 strips :o
lol there aren't even that much colors there
some are double stripe of same color
The first two purples that look the same aren't the same
and some are minor shifts in gradient that can be seen by tetrachromatics
The blue one isn't either
the first two purple dont look the same
The yellow isn't either
they look very different to me
Damn I see 39 too
And nor are the orange or red
Orange, yellow, and blue are very mildly different, but its like 3 points on the RGB scale darker, green one too, green one too
between 36 and 40 is what I see
Purple one is a different shade, and red one is pretty dark
marked all different colors
this is what I think now
or if it shows it poorly
.
I got a AOC G2790VX I think :o
you cant tell if youre tetrachromatic on that monitor
I wonder how that guy managed to train the AI to make Mikeneko
since it can't show the amount of colors a tetrachromatic can see
Purples a bit different
your monitor needs to have at least like 140% srgb
I think i saw a mikeneko lora on civit before
I have hp x27q so not the best
Those double ones are really sneaky, they change by like 3 values
my tv is very good with color though
Holy shit, thank you!
the test is not correct, because it depends on your monitor
12bit, 444 color
yeah the test can also show all gradients differently without having the colors needed
simply by how it works
that it forces a different color to show than what's there
just to set them apart
usually gaming monitors do this
I think the yellow one should be considered cheating 
do counter-act color bleed
It changes by like 1
my monitor is HP X27Q
Np! Should thank hollow tho, they make alot of vtuber loras
cheap and ok
I mean I spotted it was different, but its basically the same xD
My screen is for big gamer times 
A: Unfortunately, computer screens do not provide enough colour information to be able to ‘tap into’ the extra dimension that tetrachromats may possess. It is therefore impossible for an online test to investigate tetrachromacy.
not impossible
idk site seems legit
but improbable
I got a uhhh VA I think
probably because most screens are rgb
so you are not actually seeing the colors themselves but composite colors
I mean like if you zoom enough, most colors are not actually their color but just composite colors
at least 2 
my TV has 1 billion+ colors
my monitor 16.7 million
I normally use my tv as a monitor
but I'm not home

got all of them
so normal color vision
nice
I say... to inpaint a anime waifu in the pic 
hey
helo
Gmornin 

what your all doing? 🙂
I'm expanding my LoRAs and reducing my drive space atm 
dying slowly but surely
Well, more loras, less space, reducing it XD
https://civitai.com/models/45291/mess-line-styletrained-by-ai-images-only Found this one which is pretty cool
The two yellow ones are the only ones that are difficult for me to differentiate and I just have to zoom in closer to see that.
yea haha xD rip ssd
Master, I bought your favourite snacks as you requested~
Luckily I got a new 4 TB HDD, but, my SSD and old drive were in danger, only like 50~ or less GB were left on both combined XD
upon closer inspection yeah
ouh nice one
did someone tried this with anime?
https://civitai.com/models/6289
Yeee 
OOo, thats a pretty good idea 
awesome, i have an 4tb too, now storing there models i dont use but refuse to delete xD
I love my chromatic aberration, and thats basically it
Fair XD
I moved my entire models folder there and symlinked it xD
nice, hopefully its a 7200 rpm and has cache 😄
My 2060Ti is cooking when i generate high res 
Its uhhh, I think 5400 RPM, but, still does the job
there are 2060tis? 
this is the first time I've ever heard of their existence lmfao
there seems to be a 12gb version too, that's really cool
most likely I'd assume
Working on an old school anime setup that so far manages to avoid looking AI even XD Little teaser shot
but yeah, try img2img upscaling using the script at the bottom, should be easier on ur gpu
barely looks like ai
@vagrant falcon also use tiled vae
there you go
Lots of RNG
I'm trying out auto-photoshop sd plugin
The what? Link?
Oooo damn, thats really good, I'll have to try it :O
Also
POV my drive:
https://youtu.be/W9lsWI7zhTY
Provided to YouTube by TuneCore
A New Fear · Dance with the Dead
Driven to Madness
℗ 2022 Dance with the Dead
Released on: 2022-01-10
Auto-generated by YouTube.
XD
looks about right 
Had to catch up for 2-3 days where I haven't checked cause I got No Man's Sky and I was playing that a lot xD
well, at least you're not procrastinating
other model with the lora
True XD
Ooo, thats really pretty 

Oooooof
thx ^^ yea i could now try the lora you send before
I mean, I try to do like when I open them, I download them, 100%, I don't leave em open for later xD
Alrighty! :D
''adventure?''
upscaler
I know ESRGAN upscaler
the base of the upscaler used
What upscaler model specifically
it was 4x Fatal Anime 50000 G
Oh
@magic wave trying the messLineStyle lora now but it doenst look like in the samples, might try an other model xD
but it changed the image extremely
O fair, still looks pretty dope tho 
yea the style is cool, prompt was not changed
any of you guys have tried make a character levitate?
i want kind of a scene with a "godlike" character
dominating the scene
I LIKE
test
how 
a
- test
- a
- a
b
use #
# test
expressionless emotionally kills me
thanks 
was that a new addition in dc lately ?
or did that worked long before too?
not sure
good morning
Page was updated 6 days ago so I assume at least some of it is pretty new.

Also voice messages
yea and soundboard stuff in vc
Yes
damn, it looks like a badass "ranker" from tower of gods
it does 
strong vibes
Rachel best gurl 
Im ready to get bash
Lotta looking adorable as ever today 
i'll not debate about that

❤️
just had to update my pfp with this pic
@acoustic agate I see you reacting to images. You're supposed to be enjoying Colorado.
what model is this, i like the flat colors
Aurora merged with anything
Some deities from a story I'm working on
weights?
got it, thanks
kinda feels like a VN scene lol
try Aurora alone too it works great
Yep. @quick hill really nailed it this time (not that Kenshi wasn't already great).
it's really versatile
atleast for me
what do you like more than kenshi?
Kenshi just isn't as versatile with framing. It's very good at portraits, but struggles more when you ask for full body or really detailed backgrounds.
oh you made Aurora @quick hill ?
Probably Aurora IMO
yes
You made Aurora? wtf
i'm using it a lot

i've tried a lot of stuff with it, some fun loras 
only 2gb 👌 nice
I haven't try many loras
yup 2gbs
custom TE, custom neg embedding, and have tag words you can use (optional)
wait, i've downloaded the 7gb model
see I feel out of the loop, I've been using kenshi this whole time without knowing about aurora
Quality are pretty much the same 2gb - 7gb
Just uninstalled a bunch of Steam games. Now I have 400GB more than I had to fill with models 
7gb for training
lets goo!
fk i downloaded the 5+gb versions of every models
some models have different results because of clip broken
which is 
waifus > games
i'm so sad, when i'm trying to make my character levitate
Games I actually play go on my SSDs anyways. Most of the games that were on my HDD were just left over from being stored there when I had slow internet so I wouldn't have to download again if I wanted to play.
nice
can't we make character wear masks ?
you can't?
you for sure can
you might have to train a lora for specific masks
that works o.o
now that's a wallpaper
it can kinda just do medical masks
i should try lora
I noticed that it barely changes anything (if at all), so I just keep it at 10
jumping a line in prompt does add more weight to the line?
been using 20 lately though
only full Model i have is Anything 5, https://civitai.com/models/9409?modelVersionId=33672 which is RE = clip fix, PRT = pruned / you want RE version, its the best one if you do training or merging.
Highres is upscaling and after that img2img
like img2img steps?
You mean linebreak I been doing?
I just love organizing XD
Yeah
shes cute
Chisato's pretty cute 
it helps me understand and describe the scene i want, i think
first line background, second line character, third position
Character, character details1, character details2
Lighting1, Lighting2, Lighting3```
this how I usually prompt xD
that it is
Exactly. Usually you don't need as many steps for the img2img pass since the forms of the image are already there and it just needs to clean it up. I usually run 20 sampling steps and between 10-15 hires steps.
The benefit there being faster generations.
10 is usually enough. Occasionally it just needs a little more.
I only use 8
What denoising do you use?
0.5
0.5 here too
I do same thing but its all randomized on generation, lora and weight with wildcards, you get some crazy stuff sometimes, you would never imagine it working,
(<lora:__wildcards/style__:__wildcards/strength__>, <lora:__wildcards/style__:__wildcards/strength__>, <lora:__wildcards/style__:__wildcards/strength__>),
I do however adjust the setting of strenght into 0.15-0.35 sometimes to get lower values with more loras
whoa cool, I didn't realize you could randomize into that lol
Hmm... I feel like mine are often not quite finished at 8 steps and I use 0.51. I haven't seen the problems I've had in any of your gens though so I'm not sure what the difference is.
7 cfg?
what do you use to get decent mecha?
7.5
I have a lot of mecha loras on civitai
Actually atm I'm using 0.53 since I copied used someone else's settings
you can, just put all styles into a folder, and just get every single name of them without extention
I have like 50 styles
I still wouldn't think that would make much of a difference. Oh well, the extra couple of steps doesn't take that much time for me anyways.
all being randomized on generation
that's smart
really liven things up
Yeah I'm fine with 8 steps
problem with random generation, its only effected by batch count, it dose not work with batch size, for lora anyways, batch size will only load 1 set of loras, count its what loads multimples per count
large mecha arm is my fav
ahh, needs "Generate forever" then?
PEACH?
time to try mecha in Aurora
no, bascially, batch size say of 6, will only use lora1, lora2, lora3, the batch count its what loads, lora4, lora5, lora6, and so on, the batch count its what randomizes it
I mean to say, is "Generate forever" a way to get a new set of lora each gen?
Yes
yeah
Loras are only reloaded every new batch, there's no way to do it within a batch.
this yes
doesn't seem too bad
I tasked the waifu with changing a flat tire... I regret my decisions.
A few days until surgery and until I find out if the surgery can be made or if I'm gonna be dead in 6-24 months
I'm terrified
thank you
Best of luck man. Fuck cancer!
thanks. This is a persistent cancer but I hope it's the last time it makes an appearance
and that it hasnt spread to my lungs
I guess I'll find that out later
Praying for ya bud.
How many Waifus does it take to change a flat?
I'm gonna guess more than 2 because she seems to have cut the leg off of a second waifu.
none, becouse they cant change a flat
not gonna happen cause whoevers the smallest is always gonna say "I I I'M NOT FLAT!"
all my aurora gens feel a bit blurry
hmm is Quantumania the same kind of "kids marvel movie" that the first Ant Man was or is it closer to the other ones (generic boring shit that somehow occupies your brain for 2 hours while you fill the space underneath your covers with enough gas to be used to genocide every tsundere in anime and every tsunsimp
uuh so getting back on point. Is it kids or marvel shit?
are you using both the negative embeds?
primarily easynegative
looks like someone who used puppetry magic to combine a spider and a throne
and now she's riding around causing mayhem
Possible solutions: Lower CFG, change to blessed2.vae, lower weight strength of any networks. blessed2.vae will have the most change in sharpness.
yeah I like to imagine it'd be a really nice walking throne lol
like Gluttonys coffin
did you know it also eats her...waste?
the coffin
this isn't my headcanon, it's written in the Light Novel
(re:zero)
really weird info it has about the witches
@stable crane
(worst quality, low quality:1.4), (realistic, lip, nose, tooth, rouge, lipstick, eyeshadow:1.0), (grayscale, monochrome:1.0),
What's up?
I was using the blessed2.vae
well this is scary
Then the only other solutions that I can think of were the ones I listed above, and to possibly try less negatives in the prompt if you're nuking it.
and now I need to discover a claustrophobic horror movie (the kind that has the protagonists trapped in a small or restricted space.) Like The Thing, Alien, Sphere, Leviathan, Dawn of the Dead, 30 days of Night etc. But like horror, present or past, not sci-fi and not too monster based unless its highly psychological
discover a new one
love it when model is still in RAM and loads instantly
cause I think I've seen all the older ones (2020 and pre)
Anyone got the blessed2 link handy? Civit search is garbage.
wonder if it would be possible to create a supersoldered GPU with tons of vram and custom firmware to recognize it
thank you
I dont want to buy miner gpus
Possible, yes. Realistic for more than 0.0000001% of the population, not even remotely.
I don't trust them
@supple raptor , excellent
I'm sure there's a supergenius out there
huh swapping back to aurora, I'm getting better results now
2080 ti isnt fast enough with enough vram
I'd really love to have 20gb+ vram
I wonder if I can somehow make 3070 ti and 4070 to work together like if they were SLId
isnt that even already existing but only for nvidia themselves?
I would buy a 3090 cheaply from a miner after proven to work at least. Or for a moderate fee from non miner
no 3090, 4090 etc has 24gb
Can't SLI them, but they can potentially be used for different tasks, such as running an LLM on one and SD on the other.
then users can buy 24, 40, 80gb for commercial rigging
80gb 
on yet another random model merge I did lol
https://huggingface.co/sleepotimer/Model_A/blob/main/3A.safetensors
ohh was this the one you were workign on recently?
you sure they couldn't be placed in like some kind of special lane on a special motherboards (dunno if they exist) where if they have the same type of GDDR, like XGDDR6 that they have. Then workloads could be redistributed between them with something acting as a control node
On a whim, kinda
昔夜生
so the two pci-e's work in tandem
gonna give it a try
I remember nvidia at the very least talking about this at some point
whether or not it materialized, I dunno
hehe
cheapest solution over buying server cards like A100, would be normal GTX cards and link them all together, A100 is like 8k, 4090 is like 1.5k, cheaper version like 3090 would be better, the options are tehre
not cheaply, question is how much I can get 3090 for
and how much I can sell 3070 ti for
and this is in Sweden
prices in Sweden are still insane
Microconducters producers stopped a while so prices are trash
4090 is 2.8k cheapest
it sucks for us
Even getting two identical cards that support SLI working together is complicated enough. I don't know enough to say that it's completely impossible to get different cards to work together like that, but I know it's at least complicated enough and/or has enough problems that nobody does it.
prices are artificially held high
depends where you buy it, yes
nvidia are withholding stuff
ikr
they must be working on high vram consumer cards (I hope)
I don't know what they're doing but they're sure not changing that tire.
oh they are for sure, AMD is doing same thing, pretty sure
monopole isnt something good for us customers
they do whatever they want, and we pay the consequences
no it would seem one of them is inspecting her vagina and the other is blushing having her picture taken while being inspected
if AMD new cards will be fully compatable with image/AI generation models, nvidia is done for
once users no longer buy their cards and there is an open spot on the market for low to mid end to swoop in. Intel, possibly Razer etc will move in
they day they are AMD will stonks a lot
i would be the first to buy a bunch of cards
same
if AMD cmes out with cards that take full advantage of AI generation, there is no way im getting Nvida
Nvidia has too many great things for me to ever switch. Geforce experience, the ability for many games to have injected proprietary effects, DLSS3, path tracing, etc. etc.
I thought AMD cards still struggled with ai gen atm
wtf this looks so good
gorgeous
they are yes, AMD is shit right now, talking about future card, 2025
This is now going into my hall of fame. Excellent.
if they would somehow make use of DX12 EMA Vram Stacking in stable diffusion
that would open new doors
There have been this kind of images for so long now. Not that it's bad, just that these are not the firsts.
I think the older ones were also made by them
Very clean
They been grinding that "things inside bottles and containers" theme. Fr no cap
I've seen others. But this one has a effervescent quality to it, and a detail that I rarely see. I've been here for a bit, heh.
still a ameture 😛
There were also others with exactly what you are describing. Insane detail and vibe and exactly the same concept.
Yeah, I know. This one strikes me differently. You can go to an art museum and see many paintings that are of a similar make and quality and yet one will speak to you on a level the others don't.
with your model @zinc flax
hmmm should I experiment on a lora to create sort of an astral world "cover" (kinda like LOTR ring world for Frodo)
I mostly use booru tags lol
I'm bad at prompting
I dunno how to do it, but I will be in a hospital bed for 1-2 weeks and then in bed at home for 3-4 weeks more while doing physio rehab
that leaves a lot of time to be high on painkillers and come up with stuff
nice hat lol
hmmm
I like this hat
why do I feel like that's not the entire image

@zinc flax the model is really good at mixing hat + mouse ears
I get that feel too 
Ooo that's nice
😂 I'm really trying to generate one that Clyde will tolerate
can you send me the full image? 🤨
wtf 💀
666 new message SUS
hands
thic
Hey Nerf
That kind of hand is easy for AI to do
Hey ^^
lol wtf
How did that pass the clyde check
btw how well does amd run SD now?
Ello Nerf 
IDK how to get her some real clothes
Hello
as well as arc
baggy witch robes doing jack all
hear me out... she doesnt need them :)
(robe:1.4) in positives, and (leotard:1.5) in negatives? :o
Acer Predator Arc A770 BiFrost OC 16gb (500 usd) vs PowerColor Radeon RX 6800 XT 16GB Red Dragon(600 usd) vs MSI GeForce RTX 4070 12GB VENTUS 3X OC (780 usd)
thoughts?
Got your Kou Style LoRA in my toolset now. Love the richness it brings.
Tried adding leotard to neg?
ROCm is still trash compared to CUDA on consumer hardware afaik. I think datacenter hardware is pretty good though.
Easy, prompt "real clothes" :3
rocm is amd?
Is she that thicc? I've made thiccer 
or also intel?
This could be so much better if it wasn't for some stuff
same but I just like it
👀
I still use Auto 
vladmandic or lshqqytiger?
I still use Auto for now.
same
The model sure hates clothing huh lol
not sure what sets them apart but they seem to have moved into torch 2.0 support with latest control nets, lycoris, lora, etc
I'm using Anapnoe, considering trying Vladmandic
it knows the kinda witch we need
https://huggingface.co/SweetLuna/Aurora/tree/main/AuroraEmbeddings
you're supposed to use both of these negative embeds with aurora
ohh 👀
Eh, it's optional really.
ah it is
With the testing I've done, there are benefits to both.
mhhh Luna made a neg embedding now aswell 🤔 I think since I have time now again I need to revolutionize neg embeddings again 
if I remove physical descriptors, we get more clothing
Nerfed
ᴅᴏ ɪᴛ
I think it might have been previously. It's just called "automatic" now.
🤷♂️ I've had good luck with them and havent had the blurry issue they were having so thought it may help
I wanna try that comfy UI eventually
comfy is great if you're working on that one specific image
I need to try controlnet first xD
that you want to get perfect
Comfy is good if you enjoy tinkering more than you enjoy actually generating.
I almost do
Where you seeing that? Readme says 3.9 or 3.10 is required.
oh and I'd like to inform you all that I will turn 38 in June, I barely have any noticable grey hairs, my hair is very dense and full, no sign of balding
damn I thought you were younger based on your personality
`Removed
Drops compatibility with older versions of python and requires 3.9 or 3.10
Drops localizations`
Heh nah I'm just refusing to grow up
oh wait
it requires 3.10
hehe as you should
I misread that shit
Fair 
I feel stupid now but oh well
Ponytail version, though it won't stop doing that skirt holding thing 
O damn that looks dope 
oof
now this is burnt though which is a shame and I found the culprit in the dynamic prompt
it was several weights with a high number
@brittle jay
gotta keep weights low but not alwats too low
Is it burnt? 
not really burnt
the hair line there no?
no?
Thats just cool lighting imo 
so I should just burn every image I make to ensure they're not burnt
I mean, what do you mean by burnt? :O
high cfg way
Fair I suppose :o
well is or isn't it? I got confused now
Sabu V4 LoCon, tis one kinda does the thing you're saying
ITS MY FAVOURITE PERSON
And its just a artistic thing, not really burnt
Why is it so thin but also J U I C Y
Pretty clear here on the abs
Is it thin? 
Shes just kinda fit 
Like the proportions are weird
Maybe cause of thing gap 
That too
hey mates ! the line is thin tonight ... have fun, but please, don't go too far 😉
Idk
Lmao
Yeee, its not part of prompt, but I think it just makes the AI change the anatomy and adjust it to the gap 
Was looking out for when the warning struck
Am I goods? 
does this cross or remain artistic? Cause I just am in love with the aesthetic of the thing
Probably not...
That last one is a little...
I can't really right now go in details, AMA going on
but I flagged some around, not sure from whom rn
well it doesn't stray far from Steven Spielbergs War of the Worlds
I mean, its pretty safe still tho 
PG13
Oooo, fair then 
The what 
Yes, her.. features seem to be firmly secured in place.
I mean, they do be
fields, they're using people to fertilize and terraform
O, like in war of the worlds? 
and its blood and guts etc just churned into liquid
no thats what I meant
that this isnt worse than that
and thats pg13
this is just damned beautiful
Also my Sabu V2 LoRA really making some defined abs :o
I mean
blood rain in the apocalypse
War of the worlds wasn't really violent I think
AMA, "ask me anything", the current live event in https://discord.com/channels/1002292111942635562/1005545148211527800
they won't let me ask anything
I wonder how thin that line is 
"let's dance on it and see later" is a possibility, you do you mate 😢
jk this is ok ^^
Ooo, they doing a AMA for the LLM, thats neat 
but don't go uber thin clothes on crouch mostly, those have gone far earlier
like no thin cloth or whatever
XD
this then?
like your peach is more nsfw than the images i want to post
Is she? 
I'm not listening, but from the bit I heard its probably making the LLM be able to do more utility stuff, since it seems focused on being a conversationalist model atm :o
oh ok
if I cant train or use some future lora type stuff into a conversational model, to do whatever the heck I want it to talk about
Well, we'll see, atm it seems very dumb :o
rip to people who use it

wut
why on earth would they ban people for it?
really nice
I wonder if gunblade works, very little on danbooru
OH DAMN THATS SICK
I should try lora but this is too fun 
danbooru has tags for it
if you have DG 3.0 downloaded, you can try
it should work
once my new automatic is up and running I'll test it out
What the prompt? :o
(SLE, Detailed Background), realistic:1.4, no_humans:1.3, (display), golden (gunblade:1.2),ammunition, liquid , dark background, black background
we have this cyberbullying PSA commercial where this little girl keeps receiving notifications on her smartphone of people being hateful to her on facebook or instagram or something and she keeps reading them....and crying....going like "YOU DONT UNDERSTAND!!!! BAWLS"
put down the fucking phone little girl
stop reading your notifications
its actually consistent
Hmmmmmmm
did you try my model with it or?
not bad I guess, but arguing with holokuki's te a lot
should I?
on my model (Dark Gemini 3)
I got just gund 
which is the gunblade prompt again?
I use this one
look like chainsaw to me
or cutter
inside
or laser
idk
looks weird
Looks like railgun 
wonder where the hell I put --medvram --api --xformers etc in vlads
I guess he isn't human
i think theres none
Also9 not being so consistent for me xD
Waifu
Better 
(SLE, Detailed Background), realistic:1.4,no_humans:1.3, (display), golden, sword that looks like gun, gunblade, ammunition, liquid, dark background, black background
Trying this 
Seems to be gud tho 
Pretty sure those bullets would be against the geneva convention 
Sword gun, literally 
cool stuff
yum
ooo
Aurora has something man, idk i'm loving everything of it
vlads good or nah?
trying first gen with vlad now
insane megatron vibes
on that damn gunblade thing
why isnt it autosaving my images
I have it on
what a mess
Im sure I just have to configure it better
but still
hello there wipeout
https://civitai.com/models/6209/dark-gemini-v3I invite you to my latest








