💬｜general-chat

[trail lion]

there's what's possible, and what's convenient. depending on what your situation is, you could open it up and pull everythin down and then shut off your internet access. Technically once everything is installed there's zero need for inbound or outbound access unless you desire to upgrade something. if you had no access at all from machine A, you could still get it done as long as you could get all the necesasry models and packages there, but granted that would be much more manual effort. so I guess it comes down to what your situation actually is

[tulip yarrow]

Is there a SD3 LoRA trainer yet?

Also, will people still be using SD1.4/1.5 in a few months after this

[desert dagger]

i've got prompts that only 1.5 really understands, and I like what they do - so i'll still be using 1.5.

[tulip yarrow]

Yeah, besides it's the classic and I still really like it

[desert dagger]

the more tools in the toolbox, the better 🙂

[tulip yarrow]

And plus most of my LoRAs are trained there

What do you think Stable Diffusion 4 will be like? Will the hands finally be able to be made correctly

[astral goblet]

Theres a diffusers code library for lora training. You wouldn't know that any exist since Civitai are censoring them all.

[tulip yarrow]

yeah i know that

I mean the civitai removing all sd3 things

[astral goblet]

i deleted my civit account. Long time coming. enforcing on SD3 harder than any of the CSAM was egregious and made me embarased for hosting any loras there.

[tulip yarrow]

what the hell

talking about the csam (i know what that means)

I only browse it on safe mode

[astral goblet]

They remove content but allow the authors who posted it to remain. They also don't make it difficult for those people to participate in the first place.

Safe mode feels like bowling with the rail guards on. I'm a grown man. If it's a choice between gutter guards or a donkey show, i'll just stop coming and quit the league.

[tulip yarrow]

What if I prefer not to look at nsfw though?
But again remember that one time that someone's artwork was turned into a LoRA and the artist didn't like it yet civitai refused to take it down

[astral goblet]

Civit ran a contest to see who could produce the best lora for his artwork and mocked him in an open letter

[tulip yarrow]

what the-

[arctic sedge]

Wtf...

[astral goblet]

yeah i know. it was embarassing

[tulip yarrow]

can i see the contest (morbidly curious)

thought civitai was better than this, but guess i was wrong.

[main zenith]

They banned sd3 on civitai right

[astral goblet]

It was called "Battle of the Sams" and civitai have spent a while scrubbing all mention of it from their site . All of the contest details are destroyed / censored

https://www.thestar.com/news/canada/whose-art-is-this-really-inside-canadian-artists-fight-against-ai/article_54b0cb5c-7d67-5663-a46a-650b462da1ad.html news coverage about it, only because the man lives in toronto

[trail lion]

I'm not always on civit's side, but when it comes to this sd3 thing, I think they made the right move.

[spare copper]

Anyone tried this? https://jjihwan.github.io/projects/FIFO-Diffusion

[trail lion]

honestly, pretend sd3 never happened until they can adjust the legal language, nothing gained nothing lost

their history of creating a community is pretty solid, so this isnt like trying to pick a battle

[desert dagger]

temporarily. they want their lawyers to look over the legal terms and discuss them with stability first

[astral goblet]

the lawyers looked over the terms and agreed that civit has to destroy all models. crazy i think since that's clearly about confidentiality

SD3 will remained banned and censored from Civit as such

[desert dagger]

stop taking stuff out of context, trolling, etc. the person was asking a serious question

[trail lion]

I dont think this legaleze will get any better either, now that they reportedly got bailed out by a private equity firm

[astral goblet]

It's a fresh new post today. It's not temporary anymore

[desert dagger]

then their stance is going to cost them a lot of business. it's not that hard to start a model repository and invite all of civitAI's best creators to switch to it. wouldn't be the least bit sorry to see that happen, either.

[raven bronze]

@floral fable @astral goblet @trail lion It seems that our friend who suggested swarmui had a good idea, if it works this way and can be simply copied and pasted from an online PC to an offline one, it is infinitely superior in terms of security and privacy than the other most popular UIS, which I honestly don't see a practical way to use on any system with confidential content without putting your company at high risk.

[astral goblet]

why would you call me a troll over that? smh. you weird bruh.

[desert dagger]

because you are trolling half the time. the 'destroy content' in the stability.AI license pertains only to NDA content and not to things like models. if that's civit's take, they're stupid.

if if their lawywers really said that, their lawyers are stupid, too

[astral goblet]

That's been civit's take all along. Ever since the Olivio video convinced everyone that the license requires they destroyed material.

How am I the troll for mentioning any of that?

[desert dagger]

you said their lawyers looked over the terms. IF they really did do so, then they should have their licenses revoked

[astral goblet]

You're not even following the situation that closely it seems

[desert dagger]

yeah, i am. and i actually READ the terms.

but civit has a really bad reputation. they're probalby using this as an excuse to get rid of people they don't want

[astral goblet]

you're just trolling man. You're uninformed on civit's position and coming at me for reporting it. Sit back down.

[desert dagger]

dude, you are one of the worst trolls on here. about 10% of what you say is serious, and the rest is snark and worse.

[trail lion]

automatic1111, comfy/swarm can legit all be used 'offline', and maybe others like Easy Diffusion (I just cant vouch for that having never tried it)

[astral goblet]

the point here is that by default, SwarmUI is a portable install. You can copy the folder to a thumb drive and use it on any machine, pop it into an online machine and update it then take it back to your offline one.

you can set up other ui's to work this way too but it's not a default behavior

[trail lion]

yah I think some people are just paranoid, and it's like relax, there's no stealth uploading happening

[astral goblet]

Sometimes it's just about not having internet connection where are going to be

[trail lion]

hahah, mr fusion

[cedar salmon]

some dont take ambiguous language lightly when money is involved, they seek clarification, not some conspiracy

[lean ice]

Hey

Anyone here

[trail lion]

doubtful

[lean ice]

Got a quick question for an issue I'm facing

Is this the correct place to ask?

I'm using Stability Matrix

[astral goblet]

https://dontasktoask.com/

[trail lion]

googling stability matrix

[lean ice]

Oh ok

[lean ice]

It's not really too important I think

Basically it launches Automatic1111 I think?

I got a screenshot

Ah I can't post images here

[trail lion]

ah, looks like it launches any number of diff ui's like a wrapper

[lean ice]

The issue is ControlNet isn't working

I'm trying to genearte an image based on something I've drawn

[trail lion]

Supports:
Stable Diffusion WebUI Forge, Automatic 1111, Automatic 1111 DirectML, SD Web UI-UX, SD.Next
Fooocus, Fooocus MRE, Fooocus ControlNet SDXL, Ruined Fooocus
ComfyUI
StableSwarmUI
VoltaML
InvokeAI
SDFX
Kohya's GUI
OneTrainer

[modern gull]

guys can i use loras with every checkpoint?

is i t work like that?

[lean ice]

It used to work earlier

Doesn't now for some reason

[astral goblet]

similar architectures only

[trail lion]

never used it, no idea how you get help with it

[lean ice]

I just reinsatlled it today

[astral goblet]

sd15 loras for sd15 models. sdxl for sdxl.

[lean ice]

Using Stable Diffusion WebUI Forge

[modern gull]

ah okay thats explaining everything

[astral goblet]

some loras are less compatible with other models too. like if someone trained a lora on a refined sd15, it may work less well on other refined models.

[trail lion]

yah ,someone got ambitious and was like w're going to make this UI that can launch anything, good luck supporting that

[modern gull]

it is kinda work

but not that much

[astral goblet]

its actually a really good project and has come a long way. it's more of a package manager.

[modern gull]

i am using sd 1,.5 models with sdxl checpoint

but i am not sure

[trail lion]

not arguing that it's a good or bad project, but what do you do with the people that have a problem...that gets weird

[lean ice]

Is it not good?

[astral goblet]

their problem probably has nothing to do with matrix. it's just a package manager

[lean ice]

I just use it because it works for me, I have a low spec PC

[astral goblet]

it makes things easier than dealing with the python environments on your own. Great for lowering the barrier to entry

[lean ice]

I used AWS earlier to use someone else's PC but it doesn't work so well for me anymore

[astral goblet]

check your a1111 models folder. see if there are controlnet models in models/controlnet

[lean ice]

Also I'm basically a digital artist and my knowledge of coding is very low, so I try to use the easiest method

[lean ice]

Yeah I think the models are there but I will check it again

[astral goblet]

also, what does "controlnet isn't working" mean anyways? this is the vaguest way to describe a problem.

[lean ice]

I'll try and go into a bit more detail

Basically I launched Stable Diffusion WebUI Forge, went to img2img, and uploaded a drawing that I made which I want to render using ControlNet. I enabled all the options, ticked all the boxes, used lineart and canny and hit generate, but the final result looks nothing like the image I uploaded

[keen falcon]

Looking for help please, any "professional" with Control net ?

[trail lion]

oooo...professional, sorry I dont meet that standard

[sage reef]

did you try adjusting the controlnet strength? and if you use img2img, the denoise strength? also, because you are using cn with lineart and canny, maybe you can also try with just text2img? try some combinations, but you have to adjust some parameters for sure. @lean ice

[lean ice]

Thank you, I will try this

[trail lion]

not even sure what that means, like commerical user? or developer? or like someone who licenses it for commerical use?

[sage reef]

i think he just means someone who is experienced enough with controlnet

[trail lion]

what level of experience makes you a professional

[sage reef]

no forget about the word itself, he just means someone who is knowledgeable enough

[trail lion]

I'll say I'm a power user

heh

[astral goblet]

if you have an sd15 model , you need an sd15 controlnet. sdxl needs sdxl canny controlnet. etc..

Check the stability matrix window after a generation, and read the terminal. See if controlnet is erroring out

[trail lion]

but I dont create models, so maybe those are the engineers

[lean ice]

All right, thank you. I will check this as well

[keen falcon]

Tbh its not a huge problem, I believe ^^ I have 2 images I wanna mix, got good quality results, but.... I want an "image" to be .... "inside" the other one xD

Ok, just realized its sounding weird. Imma post it in #🏞｜general-with-images

[trail lion]

ah ok so you want to impose an image (unaltered) on top of something generated by SD?

[keen falcon]

Kinda yeah, just posted the current results and method in #🏞｜general-with-images

If anyone can help, much oblige

[trail lion]

yah I saw that, so SD probably isnt the best tech for this, but you could make it work, it may just require several steps, including some work inside an image editor. stabile diffusion is really more intended for taking a text prompt and turning that into an image

like you are way outside of what this is meant to be able to do

SD is more for like "show me a horse running in a field" and you have no idea what you will get. you are looking for very specific details

[soft iron]

where sd4?*

[trail lion]

wdym?

[soft iron]

When will SD4 be released?

[trail lion]

what is sd4 never heard of it

is that like a model? do you have a reference?

[loud solar]

SD4 only on Bittorrent trolling around

[soft iron]

no, it should be out in 2 weeks

[trail lion]

curious why ppl asking for status on something that's not even in developmen

[loud solar]

SD3 is still the work in progress ...

[trail lion]

yah, concentrate on the current sh*t shw

[loud solar]

One model out ... not really that good ... others in work ...

[trail lion]

current guidance, start asking for the next model 2 yrs from now, based on historical trends

[loud solar]

I don't remember whos law it was ... but should be 1 year now 🙂

[trail lion]

yah sure, I'll believe that when i see it

[loud solar]

I think the only thing they can do now is to remove all censorship ... it's breaking to much ...

[soft iron]

no, the SD4 should released in 2 weeks

[trail lion]

they keep saying there's no censorship

[loud solar]

Maybe a bigger version of SD3 ... but I've never heared of SD4

[loud solar]

Anyone there who believes that?

[lean ice]

You were right, the models are missing. I feel so silly because the tab to the left showed "canny" while the one one the right said "model=none" and I totally spaced out. It's been a while. It seems to be working now though

[astral goblet]

heh. glad you sorted it.

[loud solar]

Yes, it's getting more and more complex!

[astral goblet]

i dont think "no censorship" has been claimed, just that the dataset filtering wasn't as aggressive as people would accuse it of being.

What i've seen said that you might be conflating, is that the women in grass problem isn't due to any safety training or censorship. It's just bad pretraining. Hanlon's Razor.

[astral goblet]

there have always been preprocessors on the left and models on the right

[lean ice]

As an additional enquiry, I seem to notice that the model name is diffusion_pytorch_model.safetensors although I feel like the word "canny" should have been in there. Hope I got the right source for the model. It's this : https://huggingface.co/lllyasviel/sd-controlnet-canny/tree/main

[loud solar]

I was thinking of different models to work with different models ... and depending on your input you might not need a preprocessor ...

[astral goblet]

https://huggingface.co/lllyasviel/sd_control_collection/tree/main i like this repo of his. since it has proper file naming conventions. I odn't think the diffusers models will work in a1111.

one thing i hate about diffusers is that EVERY model is named the same filename. What's even the point? Who came up with that convention?? /rant

[lean ice]

Haha ok I see, maybe I can just rename it? Will check out the link too, thanks!

[astral goblet]

maybe renaming might work but diffusers is in the anme and i don't think those are a1111 compatible

[lean ice]

Ok I'll look into it some more, thanks once again

[floral umbra]

Knowing every feature/way around controlnet for instance.

[floral umbra]

Ah, so SD3 medium was just "sd 768" equivalent early access of SDXL for instance?

[keen falcon]

Guys, ive "inpainted" an area I didnt want in my picture, I want this part to blend in with the background, what do I need to change in the settings of ControlNet to make it so ?

[woven geyser]

Friends I Have set up sd3 medium, yet I wanna know if I don't own a decent gpu will the quality change? or only the execution time of creating the image

So will a random work laptop provide as good results as a high-end pc? only difference will be creating the image time

[desert dagger]

if you don't have a decent gpu, you're going to be waiting long times for ever generation

[woven geyser]

But the quality and overall result will be the same I assume

thanks

[desert dagger]

the quality is determined by things like how many steps you let it take, your time_step shift, etc. in order to get a generation in a reasonable time, you might cut those way down and then you won't get good generations

[woven geyser]

Makes perfect sense

[woven geyser]

Its my first time using sd3, how long a wait is for a medium-end pc, for a image such as this

[desert dagger]

i've got one fairly powerful GPU, for a single image i'm usually waiting 30 seconds or so

[woven geyser]

your vram?

I am using a laptop with built-in gpu, almost 256 mb vram. How much would you estimate my wait timer?

Its mostly cpu, since work laptop

[desert dagger]

https://www.newegg.com/abs-aqa14700kf4060ti16g-stratos-aqua/p/N82E16883360436 this is the machine i have

[desert dagger]

i wouldn't run comfy on there

[woven geyser]

sadge,

[desert dagger]

https://huggingface.co/spaces/stabilityai/stable-diffusion-3-medium you might SD3 here

[woven geyser]

For a full version, Is the a alternative rather than local download

this demo doesn't produce good results i think, tried few prompts

[sullen horizon]

hi im trying to install sd but it isnt working

keeps showing an error message about metadata

what would be a good fix

[final radish]

Does stability combine modularity and ai?

Like celestia

But focus on DA for things like zkml

Data hosting

Or to make sc more autonomous in general?

[hazy rose]

Algum Brasileiro?

Hey guys, my Stable Diffusion is to sloowly with a AMD RX580, how do fix it?

[desert dagger]

buy a better machine?

[cedar salmon]

sa;ty

[neon hawk]

LOL

hope everyone is having a great weekend

[radiant nacelle]

Hi

[mortal delta]

directml is going to be you friend and start with sd 1.5 and work your way up to sdxl lighting, i would do some reaserch on lcm models and lower end settings and such. i have that same card currently.

[glacial marten]

I'm currently on a 4060 but obviously I hit the vram wall. Does anyone know or have an opinion on the 4080 super vs. the 3090? And no I'm not shelling out the money for a 4090.

[glacial marten]

screw it I went with the 4080 super 😄

[pearl ocean]

I just have an old Vintage 4080

[glacial marten]

I love how you say vintage like the 4080 is old 😄

[errant merlin]

HELLO WORLDS

How bout an old Indy Silicon Graphics?

[shell cradle]

Civitai on the SD3 license:
https://civitai.com/articles/5840/update-on-sd3-on-civitai

[nova lily]

Recommended Highresfix settings? cheers 🙏

[woven bobcat]

so anyone know where are tuners uploading their SD3 finetunes without civitai?

[trim magnet]

what sd3 finetunes

[junior urchin]

It's a waste of time to do 2b finetunes

Just wait for better support for other architectures

[royal field]

Does anybody have a list of film genres/aesetics for eg. western, cyberpunk, neon etc?

[desert dagger]

https://aesthetics.fandom.com/wiki/List_of_Aesthetics#Aesthetics_by_Type

[royal field]

Anywhere this is in csv format or something similar?

[desert dagger]

not that i'm aware of

[astral goblet]

www.shakker.ai looks like a chinese clone of civit that is trying to gain some mindshare with sd3 hosting @woven bobcat

[warm junco]

You need specific launch args in your webui-user.bat

[astral goblet]

none of the checkpoint refines are actually published yet though

[low moon]

So is the new CEO a dick or cool? Will he live up to Emad's legacy?

oh he ran Facebook before. well ugh

And Napster XD

[royal gorge]

Is somebody using automatic 1111 and can maybe help me?

[low moon]

I can help by recommending you switch to Forge.

[royal gorge]

does forge work with AMD gpu too?

[low moon]

that idk - nvidia user here

[royal gorge]

Thats the thing, most Stable diffusion only work with Nvidia

I mean its only the UI

but will try it out, maybe it works 🙂

[spare copper]

FIFO diffusion is kinda underwhelming 😦 Maybe I'm just doing something wrong haha

https://www.youtube.com/watch?v=bRbIUf2XIII

Anyone played with it?

[remote reef]

Buddy can u guys suggest me some strong laptop for AI?

[shell cradle]

You could try asking Gemini 1.5 pro to refor at & output it as a CSV to see what it does.

[shell cradle]

Are you referring to the investor- Sean Parker?

[low moon]

yes and before that prem

Is Prem the new Emad?

[hasty hornet]

isn't it just defforum?

[spare copper]

Nah it'S an own thing

https://jjihwan.github.io/projects/FIFO-Diffusion

It takes videocrafter frames and interpolates them

As far as I understand 😛

[trail lion]

yes, it's the same code base as automatic1111, it's just a fork

[royal gorge]

for me it doesnt work

He tells me "untimeError: The NVIDIA driver on your system is too old (found version 11060). Please update your GPU driver by downloading and installing a new version from the URL: http://www.nvidia.com/Download/index.aspx Alternatively, go to: https://pytorch.org to install a PyTorch version that has been compiled with your version of the CUDA driver."

Even when hes "Launching Web UI with arguments: --use-directml --skip-torch-cuda-test"

[astral goblet]

I looked into prem's track record. He was brought into Weta Digital to get it's value and buyabilty up and then left after Unity bought it

[ancient spruce]

https://civitai.com/models/471439/0002-pony

[pine fiber]

still feel like video gen is pointless until we perfect image gen

it is kind of the same problem

[spare copper]

Well so far runway3 and luma do decent with img2vid

Things will get better

[pine fiber]

decent is a stretch

[tough bluff]

hi, anyone tested stable diffusion on intel core ultra cpus through openvino yet? any idea if they're viable for image generation?

[fervent thunder]

uhm i keep getting TypeError: list indices must be integers or slices, not str when trying to create a embedding

[desert dagger]

why does it think you're using strings?

[fervent thunder]

i dont know

[fervent thunder]

i put name to Hello123

[desert dagger]

it wants numbers, not strings

[fervent thunder]

its the same if i put 123

[desert dagger]

if you just use 123 you should be fine. those are integers

[fervent thunder]

same error..

TypeError: list indices must be integers or slices, not str

[desert dagger]

https://stackoverflow.com/questions/32554527/typeerror-list-indices-must-be-integers-or-slices-not-str read through this post on stackoverflow

[fervent thunder]

https://i.imgur.com/O3FjpBU.png

[desert dagger]

which tool are you using?

[fervent thunder]

webUI

[fervent thunder]

nvm i got it to work

[unborn night]

Hay sala de charla en español?

Is there a chat room in Spanish?

[low moon]

El Emad no provide. 😦

[unborn night]

Ohhh so bad

[low moon]

Si. :/

[pastel tiger]

yo what's good everyone, I'm not too familiar with stable diffusion as a developer, are they open source? i found the v1 code on github but nothing more. I was trying to learn the modern practices for text > img models and thought this was the perfect model to do so but apart from the actual model architecure of sd3 which is posted, I can't seem to find the source code for it, or even for v2.

[desert dagger]

yeah, they're open source. which version of stable diffusion are you after.

[pastel tiger]

most recent if possible

was looking around but didn't see it so i figured i'd come to the discord

just trying to see some practical code and standard practices, making my own text > img model at the moment and i realized after an unfortunate 2 weeks gans are shit LMAO

[desert dagger]

information here: https://huggingface.co/docs/diffusers/main/en/api/pipelines/stable_diffusion/stable_diffusion_3 and here as well as all the files and weights https://huggingface.co/stabilityai/stable-diffusion-3-medium - and install instructions here https://youtu.be/Di1KqPXxx2Y?si=NXtsTleKTijMBVJV if you're using comfyUI

be aware that it is an unfinished model

and in beta

[pastel tiger]

tysm I'll check this out.

yeah no problem at all, not like I'm going to copy it or anything, just want to see how things are done bleeding edge

[desert dagger]

yup 🙂

[fervent thunder]

have you tried training upscalers?

ersgan, span, DAT etc

might be an easier entry

than diffusion

[pastel tiger]

No, honestly. There's not exactly a tutorial or course for this kind of thing, at least not that I've found... Didn't even know these were a thing, I'll definitely consider it. Ontop of that, I also heard diffusers were quite compute heavy which is also an issue for me so thank you for this suggestion.

Nothing is concrete atm.

Just figured out a few days ago transformers aren't used just for NLP and that's why I was looking into it as my GAN training has been a terrible experience lmao

[desert dagger]

actually - https://lightning.ai/courses/deep-learning-fundamentals/ go through Sebastian's course. and then go through the https://huggingface.co/learn/nlp-course/chapter1/1 huggingface course. and binge watch the huggingface videos https://www.youtube.com/@HuggingFace

[pastel tiger]

I'll probably skip on the first I already watched a bunch of tutorials on basic ml/dl, and have done some projects, I was mostly referring to tutorials about bleeding edge transformer stuff like this, but your two resources are indeed quite helpful for this, thank you so much.

[desert dagger]

sebastian is a university professor. i wouldn't skip his course

[pastel tiger]

yeah i took quite a few courses from universities. Took 3 seperate stanford AI courses, andrew ng's deep learning specialization on coursera, and then did a lot of one off videos... I already checked the contents of Sebastian's course, but there's nothing on there I didn't already know.

[hushed quarry]

if so youre prob in a better place than many around in the more public diffusion spaces. If you want a dive into the older unet style sd arch there is the fast.ai part 2 course that I believe does a full replication/walk through of the sd internals (still lots of fun transformers packed into it). The official direct implementation of sd3 mmdit from the research/training code base was not released unfortunately but there is the model code avail in a few places that has been set up for inference as well as I believe a replication by lucidrains and a retrain by cloneofsimo you can check out (dont have links handy sorry). Likely you will need to do some paper diving and just tinkering with models and trying different trainings + finding groups doing the same, lots of fun things to explore in the space from many angles 🙂

[pastel tiger]

yeah honestly for my sanity sake i should probably go with older implementations which still looked good, but at the same time it pains me working on older tech knowing there's already something better, especially when the sole purpose is learning / portfolio... And wow I wasn't aware fastai did a course on sd, I remember looking into them for pytorch but they required you to learn the fastai library which I wasn't a fan of.. Yeah i figured the research code wasn't released as I tried looking, I'm reading the research paper now, and also found this from lucidrains https://github.com/lucidrains/mmdit which is an implement of the mmdit block, if this isn't what you're referring to let me know.

Absolutely everything is extremely interesting, to me it's the perfect field which always meets both the critera of flow state. Hard enough to pose a challenge, not hard enough to be overwhelming. Always something new to learn, constantly improving. Even if I'm not really a math/technical guy, just the practical implementations alone are super fun doing. Rn I'm trying to get a base understanding of all the different fields of DL before I decide what to specialize in. So far I've just done a self driving project, this is my next one. After that is sound.

just realized you were a dev, thank you for contributing to this project!

[desert dagger]

but what if, while working on older tech, you discover something even better than the newer tech?

[pastel tiger]

pfft never

I really don't understand the technical side of deep learning if you want me to be honest, and that's just standard deep learning, let alone modern stuff.

[desert dagger]

you could. hasn't been that long since people were posting on twitter with a new method for using GANs that were producing better images than stable or midjourney

[south oxide]

Like training on anatomy

malding

[pastel tiger]

yeah but that's researchers who went to university for DL and have studied the technical side

[desert dagger]

and you've pretty much done the same thing, you just don't have student debt. don't sell yourself short

[pastel tiger]

oh I'm in university

computer science

we just don't have any ai courses

actually we have one ML course but it doesn't focus on DL

im not in student debt though I have a full scholarship

thankfully

🙏

[desert dagger]

you have the internet. you have thousands of AI courses available on youtube. https://www.youtube.com/@alfcnz you might watch his

[pastel tiger]

yeah ofc ofc

I plan on self learning as much as possible, but I was never interested in the technical side of it

how the math, stats, and linear algebra worked

[desert dagger]

seriously, alfredo's courses are excellent.

[pastel tiger]

just practically implementing it

ill subscribe rn hold oln.

ideally i want to run a business actually.

[desert dagger]

his classes this last semester were probability - he's just started putting them up. you might want to start with the first class he has online and just watch them all in order

[pastel tiger]

oh this guy does the pure math

i see.

[hushed quarry]

Thats it (from lucidrains :D). If you are new to diffusion/RF models in general through there is a ton of crossover learning to be done regardless even if you arent quite working with the latest arch (and I can also say the sd3 architecture is great but still has a little bit of jank in it haha). Plenty though to research and learn about regarding general diffusion mechanics (noise sched, samplers, guidance, vaes (for ldms), etc etc). Lots of cool small projects possible as well utilizing any of the prior bases models or take the released sd3 for a spin to make something neat. Could possibly take some inspiration from the controlnet side of the house to see how adaptable these base models are with adapters or only a touch of training, or dive in deeper to the model implementations and do some tinkering to see if you get it doing weird stuff for fun to see how it responds. Honestly just open up some inference code and start poking around as a first thing inside the internals of the model implementations. Also thank you I dont work on SD anymore (left sai a few months ago, but I am glad to see people using it widely especially for learning how these things operate)

[desert dagger]

oh no, he teaches AI and ML

as well as math

you have to know probability no matter what.

[pastel tiger]

oh yeah i plan to learn a lot through it, honestly all I'm doing right now is trying to generate thumbnails based on a category and title, 1280x720 so you can imagine how difficult that was with a gan LOL... this architecture is probably way overkill for my project but a great resource for sure.

[desert dagger]

https://www.youtube.com/@Green-Code and you should watch this guy's channel too

[pastel tiger]

yeah the thing is I took 2 probability courses in school, as well as one through coursera, and also watched 3b1b essence of probability, but it just doesn't stick with me... I understand the basics but I've never been able to solve a probability problem lmao. Just not for me at all for some reason which is frustrating but doesn't really bother me all that much.

[pastel tiger]

🫡

actually i have a probability book right next to me lmao

let me throw this out.

[hushed quarry]

sounds like a fun fine tuning project honestly then, might need a decent bit of data to get it feeling nice though I imagine, and yea that would be rough with a gan haha

[desert dagger]

you solve probabilities every day 'what's the probability that If i walk off, the stuff on the stove will burn' - watch alfredo's classes, he makes it fairly easy

[pastel tiger]

oh yeah of course, i mean like those "you have 5 blue 3 green and 2 red balls, what's the probability without replacement you pick 2 blues and a red ball"

that's probably verbatim a question somewhere

can you tell i just finished a probability course LOL

[desert dagger]

grin. i'll trade your probabilities for fractions

[pastel tiger]

you got a whole course for fractions?

wtf

[desert dagger]

the rules for how to work them don't stick. i have to look them up every single time

[finite cloak]

if you want the official Stability SD3 reference self-contained impl code base (inference only, missing the training bits), that's here https://github.com/Stability-AI/sd3-ref

[pastel tiger]

honestly same. Lost so many marks on different math courses cause my fraction rules were wrong.

[desert dagger]

ooo thank you!

[pastel tiger]

this is probably a bit noob, I assume inference is just feeding the model data and not training on it, just making a prediction?

[finite cloak]

Correct

[hushed quarry]

oh I didnt even know this was put out nice

[pastel tiger]

I see, tysm.

is there any plans to open source the training at any point in the future? or do yall not do that

actually that's a pretty stupid question I assume only a few people can answer that.

[desert dagger]

not sure you need that. pretty sure you don't ahve the gpus to impliment that either

but if you want to play with training, here https://github.com/Nerogar/OneTrainer

[pastel tiger]

oh definitely not, honestly I don't know what would be omitted by taking out the training portion, is it just the training loop? lmao. If so yeah I don't need that, but If it's something vital it would be nice to have.

bro i got 1 nvidia 1650 i probably can't even train a regular diffusor, i hear it's quite compute intensive. Hope I can though.

[desert dagger]

i'm not so sure you can even RUN sd3 on that. how much Vram do you have?

[pastel tiger]

no I cannot run even sd1 on it.

i always had to use colab

[desert dagger]

no, you're not training on it

[pastel tiger]

no i mean even just generating regular images.

i couldn't with sd1

not enough vram

i think i have like 4gb

[desert dagger]

yeah. you're not training anything on it

[pastel tiger]

💀

ill make it work somehow.

things always work out.

[woven bobcat]

Legend, thank you!

[astral goblet]

I wouldn't get too excited. It sure is a chinese clone

but yw

[wispy bone]

/Stable Diffusion

[brave vigil]

I have about a zillion questions about model training

I'm trying to understand the underlying mechanics a bit more

Can someone point me to a server where a zillion or so questions would be appreciated (as opposed to be annoying XD)

As well as some reading materials?

[sage reef]

join training servers like OneTrainer for example

[desert dagger]

the banadoco server would be a good place for this

[brave vigil]

XD "active, semi-toxic, 16+"

I feel like this is a trap

[desert dagger]

they're programmers

[brave vigil]

Ohhhhh

My tribe ❤️

[fervent thunder]

out of curiosity, do people generally use high-res with SDXL models to make 2048x2048 images?

[cursive kindle]

dose anybody on here play msp

[rugged carbon]

anyone have a cool generated art of when stabledif hallucinated?
for this type of art there's a new subreddit r/hallucinatingaiart (ik such an original name)

:)** **

[turbid shore]

SPECIFICATIONS

CPU - i5-12450H

OS - Windows 11 Home
DISPLAY - 15.6" FHD (1920x1080), 144Hz, IPS-Level

GRAPHICS - NVIDIA® GeForce RTX™ 4060 Laptop GPU 8GB GDDR6
Up to 1470MHz Boost Clock 45W Maximum Graphics Power with Dynamic Boost. *May vary by scenario

MEMORY - 8GB*2 Max 64GB DDR5-4800MHZ 2 Slots

Sorry but Can i know if this laptop specs can run sdxl?Thank you!

[nova zodiac]

8gb vram so yes it should, but the 8gb of system ram may limit it

[vale steeple]

I mean it is more noticeable in LLM field ( where some people can literally stack up 128GB or even 256GB to run 70b )

for AI art, you dont have to care much about the RAM or memory

[turbid shore]

Ah thank you!

[turbid shore]

Ah really?

So just focus on vram of my gpu?

[vale steeple]

yeah pretty much that

[turbid shore]

I just "scared" if laptop 8gb vram is not as good as 8gb vram of pc.huhu

Cause i want to buy that laptop.and hoping it can also upgrade sd to sdxl.By your explanation,i confident now

[nova zodiac]

It still has to have enough to pass the information through, especially if using controlnets and stuff, but generally the vram is way more important for sure

[grim grail]

hello everyone

[solemn meadow]

gn

[scarlet idol]

Are there any tutorials available for learning stable diffusion?

[bleak matrix]

Good morning, everyone! How are you all today?

[neon radish]

Sup

Dead chat fr

[bleak matrix]

Just out doing the things life needs me to do! Youself?

[sudden ruin]

Maybe revive it with more than a yo or sup

[fervent thunder]

yo sup yo!

where it at!

[surreal jay]

howzit

[fervent thunder]

word

[small belfry]

Does anyone have the md5 or sha256 signature of sd3_medium_incl_clips.safetensors file?

I had a problem transferring it and now don't know if it's corrupted

[calm siren]

hi

[fervent thunder]

is there any comfy workflow to generate an image in pony(realism), then send it to sdxl to make it more photorealistic?

[rancid ore]

hello, i just know it and dont know where to start.
what's the difference between stable assistant and artisan ?

i simply want to create art story, and rework those image until it matches with my concept.

so is there webapp available here? or i need to download it to my pc? and which one ?

[misty rivet]

Hello, I just paid for Deforum but I don't have a link to add them to my server.

[sudden ruin]

Then I would ask on their discord

[native rivet]

Why pay for deforum

Sounds like you got scammed

[willow flame]

Hi

[native rivet]

[willow flame]

Im leah

[fervent thunder]

👋

[willow flame]

https://tenor.com/view/hot-sweating-melting-burning-donald-duck-gif-12424818824830848928

[nova lily]

I know it's a culmination, but wat mostly affects generation time?
Prompt count
Using an XL model
Number of LORAs
Resolution
Sampler
Steps.

[rancid ore]

what upscale does?

[native rivet]

Resolution and steps

[desert dagger]

makes the image bigger

[frank gust]

Is it possible to train a LORA on the sd3 medium?

[cinder blaze]

please anyone help me i'm getting so mad over this simple thing :

AttributeError: 'NoneType' object has no attribute 'lowvram'

everything was working alright like 2 days ago and i touched nothing since but now today i try running my webui and when i just try to generate an image it just outputs me this error
webui version 1.9.4 (last one) i can't downgrade on previous versions because SD3 don't work on the other versions for some reasons and also because i don't understand everything was working fine and now it doesnt without any changes between now and then

i'm really in need of help pls

[desert dagger]

if it was me, i'd run some system checks to see what's eating the vram. are you running anything else in the background?

[cinder blaze]

no i did a reboot of my pc

my pc is : Intel core i7 11th / RTX 3070 / 32gram ddr4

[split sand]

hey guys i have a question around SDXL controlnet, im using openpose thibaud_xl and im churning really slow like 60s/it lol any reccomendation on how to fix it?

[dark hawk]

https://dsc.gg/vexel

[still glacier]

yeah, I'm not clicking that

[desert dagger]

seems to be an app?

[dark hawk]

Yessir

I created that bot, it is now verified

[fervent thunder]

cleek it!

[dark hawk]

Don't worry (:

[fervent thunder]

stfu

[desert dagger]

what's it do?

[fervent thunder]

rar

[dark hawk]

Integrated with Gemini for chat assistant & image analysis and StabilityAi v1 for text to image & image to image generation

[desert dagger]

ah. might be better to get the mods to put it into this server rather than just posting a link to it?

[dark hawk]

I don't think they will add even it is verified

Security issues

[still glacier]

There's #1092446741984444416 for stuff like that. But yes please don't drop random links without any sort of explanation about it. Otherwise people will assume the worse.

[still glacier]

and chill out please.

[astral goblet]

no context shortened link. Can you be any shadier?

[dark hawk]

Okay lemme explain that

@astral goblet

It is a discord bot Integrated with Gemini for chat assistant & image analysis and StabilityAi v1 for text to image & image to image generation.

And the link is invite link
https://dsc.gg/vexel

[astral goblet]

yeah i figured it was you going to popular servers to farm clicks. not wrong it turns out.

[dark hawk]

any link with dsc.gg is safe, it will either redirect to a discord server or discord bot (:

[dark hawk]

Alright thanks for your information!

[desert dagger]

and if it's a good bot, get the server admins to put it in so everyone can find it

[dark hawk]

Okay going to add it in #1092446741984444416 firstly

You must try it out

[desert dagger]

but why? i can just go to claude if i want an llm to revise a prompt for me

[dark hawk]

As you wish

[rugged vale]

anyone know a good training script for yolo?
trying to train with segmentation

[spring egret]

Hi everyone 🙂

Someone know how to fix it?
[E:onnxruntime:Default, provider_bridge_ort.cc:1744 onnxruntime::TryGetProviderInfo_CUDA]

Using SDWui extension

[desert dagger]

https://youtu.be/ewKM7uCRPUg?si=9xtX87QB8_-3F19i

matte0's new node

[solemn marsh]

do people actually buy ai art?

[sage reef]

Pog, Il have to check this out later 😮

mad scientist lol

[cold sage]

Yes, but not stuff that the average person is pumping out en-mass. People with more advanced prompting skills/tools + some artistic background for touchups and an eye for genuinely good scenes and composure can and have made money with it.

Basically, if you already had some art skills (or at least an eye for it) and then got gud at this stuff too, otherwise odds are slim you'll sell anything.

[junior urchin]

If it's indistinguishable from non ai art, it can seller better

Or make art and use sketch with controlnet to make coloring books

[sage reef]

you can also technically generate some very cool pixel art stuff, like sprites, tiles, etc, lot of indie game devs might buy them perhaps

[lavish obsidian]

[sage reef]

[lavish obsidian]

Where did https://github.com/AUTOMATIC1111/stable-diffusion-webui-assets.git go?

Isn't this a key file for the instillation?

Oh wait there it goes.

Github was just being weird.

[mystic siren]

any good news this week?

[strong anchor]

え

[left patrol]

Please tell me here, where can I perform Vincent diagram operation in the new version of SD?

[lavish obsidian]

何の絵

What picture

[marble trail]

hello!! is stable diffusion one of those ai programs?

[strong anchor]

使い方がわからなくて…
勉強します💦

[pearl ocean]

Unstable Diffusion

[rancid ore]

video isnt available in assistant?

i dont recive any video, but the ai offer can do the video? wth

[sonic pumice]

Does anyone know of any real way to achieve proper looking guns? I always get these mechanical monstrosities with horrible hand and finger placements

Probably a dream...

[full saffron]

if a Lora says "Base Model: SDXL" does this means that it can only be used with XL based models?

[broken smelt]

yep

[full saffron]

thanks

[late surge]

hey

[rancid crane]

pkmngotrnr

Atega

[lusty creek]

gm

[gritty temple]

icon aoi

[austere cosmos]

Hey guys
I am trying to export pidinet from controlnet_aux to onnx
But I am getting error because of some createconvfunc.

It is showing can't pickle local object 'createConvFunc'

[bleak matrix]

Good morning, everyone! How are we all this morning?

[fervent thunder]

Good morning!

[somber idol]

[trail lion]

[brittle oyster]

My system isn't passing the "CUDA test" when I launch it. I have a Nvidia 3080. I think maybe the drivers are the issue, is there a specific driver I should use?

Or should I just skip the test?

[sudden ruin]

What test?

[brittle oyster]

When A1111 launches? "RuntimeError: Torch is not able to use GPU; add --skip-torch-cuda-test to COMMANDLINE_ARGS variable to disable this check"

[sudden ruin]

Thats more of a #🤝｜tech-support question

Could be a missmatch between your cuda and torch version

--skip-torch-cuda-test would set it to CPU mode and not use your capable GPU

Did you install CUDA?

[brittle oyster]

yes it's some sort of issue with my pytorch version on my CUDA, I'll do some more research. Not sure how to figure that out exactly...

[warm junco]

Come to #🤝｜tech-support with an cmd log

[lapis lagoon]

Hi everyone

I am a newbie to all of this

can anyone tell me how i could use my HF token with diffusers?

[pale latch]

lol how quick the community turns on people. The open model initiative is going to have the angry mob spin rumors about it all the same. They mentioned ethics being involved with their mission. Faux Pas.

I hope those guys get good momentum and don't engage with the reddit community.

[narrow kernel]

a hard pill for a lot of the people in the diffusion communities to swallow: you're never going to get an uncensored base(quality with large trainingset) model again. you'll eventually get some decent finetunes, but unless someone's got a couple hundred a100s and a couple months to burn, they'll just end up like all the other finetunes where every person has the same handful of facial structures, expressions and poses.

[pale latch]

yeah. Jagged little pill. It's like RAAAIN

[forest trout]

Mr. play it safe, was afraid to try.
He tried to pose on the grass, under the blue sky.
He waited his whole damn life, to be drawn just right.
But as the model stumbled he said "Well isn't this nice..."

Isn't it ironic, don't you think?

[modest onyx]

greetings, I would like to add a stablebot to my discord server, I am ready to pay for a paid subscription, tell me how to do this?

[fervent thunder]

nom nom nom

[loud solar]

Popcorn?

[pale latch]

i ❤️ it. rings perfectly in my head

[loud solar]

Let's go to Suno and create a song 😄

[pale latch]

AI songs cheapen creativity imo. I don't like it for the same reason i don't really like auto tune artists.

[sour needle]

Umm what happens if you use too much stable diffusion in google colab? Would you get banned eventually or would it just stop working?

Is it considered as piracy?

I dont want google to send an fbi to my house

[loud solar]

You will get a 10$ Bill for every picture created 😄

[sour needle]

Fr? Im cooked

[trail lion]

open model initiative - referring to that post on reddit? That looked sus to me, anybody know if that was a legit post or was that someone trolling? the discord and the google forms were a bit sketch just sayin, no official domain name reservation

[loud solar]

Used it for Deforum ... wasn't banned and got no problems.

[pale latch]

I dont know what looks sketchy about it at all. Lots of good people are involved with it.

People on the reddit community want to hate it though because ethics were mentioned

[trail lion]

the names mentioned in the post were real, nothing else about it looked like anything other than some bozo, I guess we'll see if it's a real thing or not going forward

like something on civit's site, for example

[pale latch]

None of those people are disputing their "signatures" on that post

https://civitai.com/articles/5884

[trim magnet]

dont hate on them before release,wait for release then u can hate on them

[pale latch]

People want to stay mad so they will

[trail lion]

no idea what ppl are mad about, but if that's a real thing, I think that's fantastic

that would be like people getting mad when Linus first announced Linux

the community wants things to stay open, and I think there is some justified fears about special interests

[sand walrus]

They will eventually restrict your usage. They don't really do anything other than ban you for a day or so. That being said, running it on runpod is literally like 30 cents an hour.

[trail lion]

even cheaper on vast

for like a 3090

I'm showing runpod at .44 for a 3090 currently

you can get away with less if you're just doing image gen

[kind thorn]

Unless they fix and un-censor SD3 and update the license, I don't think any amount of new investors is going to save Stability.AI in the long run.

What do they have that can compete and make them money in the current market?

[trail lion]

I dont know, but if those are the concerns that drive the decision making, what we'll end up with is corporate interests. I'd rather see them become like gimp or blender, but that's unlikely

[narrow kernel]

They one they lock behind API that is trained or is being trained correctly, but filters inputs and outputs to prevent NSFW content. They'll go the dall-e/mj route.

They never really made money from end users that sit around making furry and deepfake pron anyways

Pennies in the couch if anything

[trail lion]

the same could have been said about early linux users, but now Linux is a force in the enterprise

you need the community to drive an open source philosophy

it started out as something that seemed like it was going for the open source ideology, cant blame the users for that

[brave vigil]

I'm looking to assemble a proper SD build so I can stop paying through the nose for Colab

I know its been asked 10000 times already, but since the tech changes all the time

What do I need? I already have a macbook, so I don't care about the CPU

I'd like at least 24GB Vram, and something with good speed as well (vram != speed, I'm told)

I've been told the Nvidia 4090 is probably the way to go, it seems like the standard. Personally though, I'd like to max this thing out. Is there such a thing as 48GB vram?

[junior urchin]

5080 is rolling out soon

[junior urchin]

Probably cheaper to get 2x 4090 instead of a gpu with 48 :P

[brave vigil]

This is what I'm thinking, but I've heard dual GPUs don't actually double performance

[junior urchin]

the cheapest 48gb vram gpu, would probably be the RTX A6000

[brave vigil]

XD So it seems

[narrow kernel]

No, there was a goal for Linux that was actually beneficial to the server/PC ecosystem. Big companies backed the development of flavors of Linux because it was cheaper in the long run vs buying licenses of Windows and they could strip them down/tune as much as they needed to run servers for things like Amazon.

People sitting around making lewd waifus and deep fakes all day, doesn't serve any actual benefit to the generative AI community and if anything, shys investors and normal users away.

The community here in discord or on Reddit are like 1% of users. You guys are in an echo chamber.

Oh and excluding servers and stuff, according to steam hardware survey, Linux is like <2% of PCs and that's counting steamdecks. Correction:2.3%

[trail lion]

ok, well I'll continue to root for the community, and if others want to advocate for corporate interests and demonize the useless user community, I guess that's up to them.

[pale latch]

One of the first major linux distributions was Red Hat, enterprise linux. Enterprise and corporate involvement is actually why Linux is such a power house these days. Linus was smart and funneled all that corporate interest into kernel development.

Unix has even deeper corporate roots

i'm all for hacker culture but lets not revise history

[trail lion]

and there's gimp , and there's blender, the point was more about it's possible to facilitate an opensource model, you dont have to be google or meta

I guess the point was lost on everbody

[pale latch]

yess. truly. only you understand foss

[trail lion]

it just takes an idealist usually, if it becomes all about money from the outset, that's how it'll end

emad I believe was such a person

[pale latch]

os2 happened too. companie realized they could't change it to their purposes and licensing was a night mare. it failed for a lot of people when the fix was probably a few bytes. there was a huge commercial migration to linux early on

corporate interests likely is why linux got boot strapped so succesfully

temple OS is what happens when an idealist creates an OS.

you have to be pragmatic af to get a new technology bootstrapped

[trail lion]

in the case of both gimp and blender, they are up against some real powerhouses, like adobe, autodesk, Maya. linux is up against microsoft and apple, so despite those kind of odds, a niche can still be found

[pale latch]

worth nothing then that gimp began as a university backed project and then Stalman brought them into the GNU project which had considerable funding. Blender started it's life as closed source shareware and fished for investors to grow. They make money today with training courses and donations. Their main market is animation studios backed with a lot of money

[fervent thunder]

yeah very little of the big successful open source things are pure

[pale latch]

i dont know if pure is the right word. like, gnu foundation i sabout as pure as you can get in the foss arena. stalman don't fuck around

but it's money. its vast resources

[full lark]

Have anyone tried MiniCPM Llama3-V 2.5 for captioning? 👀

[frozen solar]

Hello everyone I am relatively new to the whole AI art ways. Question what is the point/benefit of downloading Loras. When you can simply put the Lora in the Txt-image promt? 🤔

[pearl ocean]

I hear on reddit ppl saying SD3 is too censored

[sudden ruin]

Reddit is the best source!

[obsidian fiber]

Hi community

I am 22 years old freshgrad computer engineer from cairo, an idea came across my mind is that why there's no text to image models that can understands and compile Arabic language at all . I have been studying for week now about stable diffusion model thought I can build one myself that understands and deal with Arabic language. but a friend of mine suggested to me why don't you use an open source pre-existing model and just edit the tokens/vocab file.

I'm wondering if this is doable and if so where to start ?

[pastel willow]

hello everyone, am looking for an AI-video generation model that is either open source or has an api I can use, any suggestions?

[fervent thunder]

i've used it extensively and it is censored but actually it could be also undertrained which is why there are anatomical disfigures when trying to generate bit revealing images

[willow crescent]

a lora is trained on specific images and placed on top of the original checkpoint. The value you add in the prompt is merely how much it influences the final result

[pearl ocean]

Oh, makes sense

[fervent thunder]

it can get confusing too, there are different opinions about sd3

but i would say for a base model its pretty good with scenic images, or images that don't involve human figures, they can be epic, even portrait faces will look good, but when it comes to detailed human figure you will see a lot of short comings and blemishes,

[vale steeple]

I mean depends of by what you mean censorship

[pearl ocean]

Yeah, makes pretty good mystic animal

[vale steeple]

Some people managed to get fine anatomy from SD3

[fervent thunder]

cherry picking

dont say some ppl you can try on your own too

[vale steeple]

I can barely run SD3 lmao

Yeah sure it is cherrypicking

[fervent thunder]

the thing about cherry picking is .. it is natural to do that, but the % of cherry picking with sd3 and human figure is pretty big

[fervent thunder]

how come?

[vale steeple]

10 min per 1024x1024 pic

[fervent thunder]

oooh, ok, understood

[fervent thunder]

take a look at #🏞｜general-with-images

[turbid shore]

What commandline args that suit sdxl?

[hexed oracle]

Can anyone explain the difference between SDXL & SD3

[fervent thunder]

The latter was made by Jerry Lee Lewis

[grim valley]

hi

[fervent thunder]

geez! about time!

[trail lion]

wow, there's a blast from the past

[hexed oracle]

.......

[turbid shore]

Is installing xformers taking so long?

[fervent thunder]

Hey ✌️
can you read out the prompts, that other ppl for their pics?

[frozen solar]

I see so downloading a Lora is not necessary really? 🤔

[fervent thunder]

thanks, can you also remove them?

Alright, thank you ✌️

[desert dagger]

It's not. It's hours of work learning how to use the model

[fervent thunder]

just to be clear
cherry picking is where you generate lots of samples and then only show the best one
if you spend time optimising your workflow and prompt
that's not cherry picking

[trail lion]

those statements are both true, but we'll never know whether a posted image is cherry picking or not will we

so I guess it's moot

[fervent thunder]

fixable if people post image with comfy workflow embedded

[pulsar venture]

Hi, can someone help me with controlnet, there is some differents between SD and SDXL using controlnet?

[turbid shore]

Hi i have problem!

My laptop rtx4060 8gbvram
And i have 8gb ram

But when i download sdxl checkpoint. I cant load it in my A11111

What seems the problem?

I try to run the autismmixSDXL

[desert dagger]

i'm aware what cherry picking is. that's why i said it's not cherry picking, it's hours of working with the model and learning how it thinks, learning how all the values you can change work, and learning how to prompt it so you get the best result.

[fervent thunder]

yeah I was agreeing with you, don't worry

[lyric hare]

https://tenor.com/view/the-office-no-angry-steve-carell-michael-scott-gif-5606969

[full lark]

Does it give a "cuda out of memory" error or another one?

[turbid shore]

Yes that one

[turbid shore]

Eh no its other error

I cannot find the error actually

[willow crescent]

you can think of loRAs/doRAs like an addon, works fine without as well though

[frozen solar]

Gotcha thanks a bunch 😁

[empty cloud]

hey everyone as I am goin to college i am looking for a laptop can anyone tell me what to chosse between hp omen and macbook air for ml workloads and model inferencing?

[desert dagger]

can you get one with a good nvidia gpu?

[empty cloud]

Yes

[cedar salmon]

its a bit hovelled from the get go but the omen with a 12GB graphics card would be the strongest

[empty cloud]

Ah can i consider a 6 or a 8gb one

Or a MacBook Air

I have a budget of that only sadly

[loud solar]

Not sure how many here have knowledge with Apple computers ... I couldn't find one ...

[tight wave]

Привет, есть кто из русскоговорящих?)

[full hare]

Привет, есть, но я зашла сюда только что

Hello, could you please tell me where I can submit my request for generating an image?

[loud solar]

Have a look here: https://discord.com/channels/1002292111942635562/1237461679286128730

[desert dagger]

you're not using blender, but these benchmarks apply to you as well https://opendata.blender.org/ @empty cloud

[tight wave]

I started using OneTrainer to train LoRA on a dataset. My question is, what are the best batch and epoch parameters for higher quality models?

I tried 16 batches and 200 epochs, and 1 batch and 200 epochs. Using SD 1.5 LoRA, the results are completely different. In the first case, the image is less detailed but has a good shape. In the second case, there are too many details but higher quality. Can anyone advise on how to best interact with these parameters?

[near valve]

anyone have any good examples of comfyui portfolios? Unsure how best to create a gallery of my work alongside workflow examples etc

[verbal osprey]

Have there been any updates regarding SD3 and civit.ai?

[forest trout]

Still banned from what I heard.

[fervent thunder]

I don't understand civit

surely SAI will stay alive longer than civit will

[desert dagger]

civit doesn't have the best reputation as a business

[fervent thunder]

ah I didn't know that

I thought civit were respected (I haven't followed the drama much)

[hasty hornet]

there is no drama, civit can't just willy nilly let people use SD3 models as they are doing with other models under current SD3 license

not sure if they even allowed to just post it since civit itself is commercial project

It's not just civi too, I don't think any model fine-tuner wants to be liable for other people do with the model too...they could've just posted models on Hugging face or whatever, even google disc, why not

[fervent thunder]

I agree that the license is bad

if I was going to fine tune I would go for an enterprise license

personally

[desert dagger]

not by a fairly large number of people

[main zenith]

can I talk with an unstable diffusion server admin

I got banned for a dumb reason

😦

[pale latch]

unstable diffusion isn't affiliated with the actual company at all. you'd think they are because they're ripping off the trademarks right? But stability.ai doesn't care about it i guess

[main zenith]

damn

ight

[pale latch]

they're scam artists. there are better communities to participate in. they ban people so easily there because it keeps their cult subjects scared and obedient

they banned me for posting nintendo characters with low revealing neck lines

i've even seen people who paid for credits on their generation service get banned for dumb shit

[cedar salmon]

i never did use their checkpoints /shrug too many others

[rancid fjord]

i need help

[desert dagger]

what with?

[rancid fjord]

making img2img more accurate to the original style of the image you input

[desert dagger]

what are you currently doing?

[rancid fjord]

trying to change the style of an image i have to something else but it turns out ugly and nothing like the original image

[desert dagger]

not quite what I was asking. let's start with which interface are you using? comfy? auto1111? something else?

[rancid fjord]

oh

auto1111

[desert dagger]

this is something i'm not going to be able to help with, i use comfy and i'm not all that familiar with auto1111, but if you ask in #🤝｜tech-support there are a number of people that watch that channel that can assist

[neon hawk]

Hello world

Grid paper

Hope you are grand

[brave vigil]

I've got a weird one for you all

How would I go about training a model which could draw the blocked-in, first-stage-of-an-illustration form of images?

I guess I'd need a dataset, of course. Would that mean gathering thousands of blocked in images, properly tagged?

[rugged vale]

Whats happening with SD3 atm?

Any news on the license situation?

[desert dagger]

you could train a lora on a lot fewer than that

[dawn mulch]

Summarize all the posts in this channel/room into one paragraph.

[broken smelt]

Yes

[solid coyote]

hey guys , may i ask how do u guys organize ur AI models and lora etc to get the most use of them between different plateforms like comfyui and auto1111

[haughty spindle]

okey guys , This is my first time using Discord and also my first time joining a channel. Is this real-time?

[dawn mulch]

Everything here exist prior to 2012. Including your interaction ion discord.

[sudden ruin]

Its real and time, yeah

[haughty spindle]

ya

[warm junco]

I have all models In Auto1111, there I have them managed with sub folders for sdxl, pony, etc loras with sub folders for characters, styles etc.
Then in comfyui there is a file called
Extra_model_paths.example.yaml
This file needs to be renamed to extra_model_paths.yaml and editet. In the section base path there is the path to Auto1111.
Then it will automatically use the same folder structure as in auto1111

[lusty creek]

hi,guys

gm

[lament hinge]

nihao

[brave vigil]

I had really good success training a lora today. I got really, really close to what I want

I've got some questions though

Firstly, should I be using full sentences in my captions? The images are anime/cartoon and so tags seem appropriate. Does it matter?

Second, I built my regularization images by taking my captions and using them as prompts on the base model

The the lora I trained with the reg images turned out a bit worse than the one without. I'm guessing because the reg images were of poor quality

Which brings to my next question - does the quality/style of a reg image matter? Or, just the content?

Last two questions: should I include captions for my reg images? And, would I get better results if I used my half-decent-but-not-perfect lora that I trained today to create my next round of reg images? Like, how does "closeness" between reg images and dataset images impact the quality of the training?

[dense ruin]

hi, I'm a developer and I'm seeking for a pre-made workstation (say, lenovo, dell, hp) that gives its best on stablediffusion, and possibly in a dual-gpu configuration. I tried to find some, I hoped to get a dual-RTX4090 setup but I can only find such workstations with T400, T1000, or A2000 cards; I'm not an expert, how do these cards compare to the RTX 4090 (and, say, below) for stablediffusion performance?

same question for xeon processors if the question even makes sense

[trim magnet]

cpu doesnt really matter for SD,dual gpu only works when training,dual 4090 is a waste because 4090 doesnt have nvlink so cant be connected together only 3090,older gen tesla cards and ADA gpus can be linked together.

[dawn mulch]

@trim magnet So the newer GPUS have been 'sabotaged'?

[trim magnet]

no they just want you to buy ada cards for 10k+ usd

[dawn mulch]

makes sense

[solid coyote]

thanks a lot rly

i ll try this out

[wet grotto]

hi guys

for who traine models, kaggle are giving two t4 (32vram) free, you can use there 🙂

I'm running SD there

[lusty beacon]

https://fxtwitter.com/etched/status/1805625693113663834?s=46&t=AZs45ckJ7UUM_kJZcxnR_w

[sudden ruin]

Huge if true

[worthy lichen]

Hey everyone. What happened to the old channels with all our gens? Am I missing something or are they gone now?

[late cedar]

@river sparrow sent you a friend request…

[lusty beacon]

Yesh

[sudden ruin]

They have been archived

[sudden ruin]

#💬｜general-chat message

[fervent thunder]

傻逼们

我是你们的爹

儿子们

hi

[fervent thunder]

are all the civtai images down or just my connection

did i like, possibly miss something

[desert dagger]

i'm seeing images on civit

[sudden ruin]

I had login issues today, but images load for me

[fervent thunder]

Most of my images are not loading. I bet someone is tinkering with something.

[sudden ruin]

Works fine for me

[fervent thunder]

It's not a problem. I can just guess what stuff looks like!

[desert dagger]

The images are there, your browser might have a slow connection

[worthy lichen]

right. can we still see them, or just internally archived. Sad, was nice to have subject specific discussion channels and build relationships with people interested in the same gens

We had some good channels that weren't bot spammed. maybe they will make a comeback

[bronze hearth]

.

is this a paid thing now?

im back after a very very long time

so unsure

sure

[worthy lichen]

How does this relate to SD and AI?

not meant in a disparaging way, just curious

[loud solar]

A lot of Nerds fooling around with A.I. 😄

[brave vigil]

Whaaaaaaaat?

[wet grotto]

yesss

I used to run SD but in the future will try training a model there, 32vram is to much

if need help can ask me

[subtle whale]

Hi

[sudden ruin]

I think they are internal right now. If enough people spark interest in getting them back maybe they will do it

[forest trout]

Well how much interest is enough interest? There's at least a dozen active members of this server that want to access them.

[fervent thunder]

what is the current best AMD ai image generator that you can install on your PC locally?

would recommend selling your AMD GPU and getting Nvidia

even if it is a downgrade

[loud solar]

Got a direct Link?

[wet grotto]

yes

Kaggle: https://www.kaggle.com/
SD notebook: https://github.com/DEX-1101/sd-webui-notebook

@loud solar

[loud solar]

Thank you! ❤️

[wet grotto]

you are welcome ^^

[drowsy robin]

Hm. Is there not a denoise node for ComfyUI?

[merry dagger]

I want a photo about July 15 in Turkey

[honest mica]

You have still time to book tickets and make one. 🤷

[shell tendon]

there's like 8 ppl generating stuff with cascade every day on here

there was a long lull in april or so as everyone thought SD3 was right around the corner, and there were unsolved problems with noise, but solutoins have recently been found

[honest mica]

Cascade got archived without a warning, or at least non that i know of, and people were still sharing pictures and ideas in there.

[wet grotto]

@loud solar @brave vigil cant generate nsfw content or will banned, ok?

[loud solar]

OK 😉 Not really interested in bad stuff

[wet grotto]

only sayng, because its too good to be banned

[sudden ruin]

I already told you, its not for me to decide

[hot estuary]

If you create a model designed to create images that intentionally have bad AI artifacts, and it then does so, is it a good model or a bad one?

[cedar salmon]

depends on the judge

[brave vigil]

Yes! But, can still generate content for a dataset

[wet grotto]

what you means? like traine a model?

whar you means with generate content for a dataset?

traine a model? it yes 😉

but I will not risk generate nsfw, I'm afraid to be banned

[brave vigil]

That's not what I mean

I'm building a big fat dataset of generated images in my own custom style

The vast majority of those images are SFW - headshots and landscapes and such

I can generate those no problem

[wet grotto]

sure! you can 🙂

it's not the same of traine a model?

[brave vigil]

I doubt kaggle checks datasets for NSFW when you're training

That'd require a tonne of GPU power to inspect images. It probably just monitors tags as they're entered during image genertion on A1111

That'd be my guess anyway

[wet grotto]

hmmm idk, they catch nsfw words like a model name, maybe a tag on image can be catched?

yes I thought about tags too

[brave vigil]

Hard to say

Really depends on how thoroughly they've coded their inspection technology, and how much CPU/GPU power their willing to invest into the monitoring

[wet grotto]

I agree

[brave vigil]

I like your Yoshi egg btw

[wet grotto]

hhaha thanks ^^

you know it 🙂

[pale latch]

agreed thats a solid use of discord profile pics. super duper smart. you could make a whoel squad too like , purple or red yoshi eggs. how cool would that be if you all roll up on a chat lookin all dinotastic like that?

[hasty hornet]

I;m pretty sure they do inspect, but how exactly - not sure...maybe by hand after some amount of reports, maybe they have nsfw model list and ban anyone who adds them, but images yea, doubt it

well, I know they ban people, so they do something 😄

[wet grotto]

thanks! hahaha very cool! you have vision, your point was very smart too, sure would be great ^^ who knows we dont do it someday

[wet grotto]

I imagine that is a mix off all it, but models with nsfw name I know that they bann

[pale latch]

boomboom shakalackalacka booom https://youtu.be/vgiDcJi534Y

[shell tendon]

who should we talk to? who makes the decision

[drowsy robin]

Would you guys say 8s/IT is bad for something like Pixart Sigma 2k?

[full willow]

Gotcha. Any suggestion for generating on AMD beside switch to Nvidia?

[forest trout]

Most likely its someone whose name belongs on the food pyramid.

[shell tendon]

yup

no response though

maybe we need a petition lol

really silly this is even an issue... still don't understand why archived communities had to be deleted

no server i've ever been on did that kinda shit

[shell tendon]

#🆕｜sd3 message until SD3 can match what cascade can easily do i think it makes sense to have a cascade channel

it can def do some really cool stuff but cascade covers different ground, it seems to be complementary

[fervent thunder]

I think using AMD for SD is just not viable at all at the moment
You might get the core model working but all the addons and nodes are a different matter

[karmic brook]

No

[shell tendon]

Can't even make the archive available again? Why mention you can resync it then?

[karmic brook]

Please stop pinging about making a cascade channel
You mention 8 people wanting and all I see is 1 person pinging over and over
You can still post in the other channels

[shell tendon]

I didn't ping you lol

[karmic brook]

Yup, which is why I said pinging in the generalized way

[shell tendon]

So could you at least unarchive it?

Err, make it visible as an archive

It is way more than just me that wants it back

We're all on different time zones

So the conversation isn't synced upw

I've seen at least 7 ppl complain in here about it

I'm not going to speak for them but it's been said

"I think they are internal right now. If enough people spark interest in getting them back maybe they will do it"

"Well how much interest is enough interest? There's at least a dozen active members of this server that want to access them."

That's the message from Boto I responded to, and Gecks reply

Not sure how its fair to say I cant respond directly to a message like that

[spare fable]

I don't see why it's so difficult to resurrect a channel for Cascade. What's another channel added to the 35ish public ones that are already available? If there's some other reason for it not being made available, then say why. Just saying no without a good reason seems like a cop out.

SAI has quickly bled many of its most ardent supporters and shows little to no goodwill anymore, even for small gestures on Discord. It's sad.

[desert dagger]

it's not. they don't want to.

[spare fable]

Yeah, I got that. I also don't agree with it and it's a poor way to handle the request.

[shell tendon]

Maybe the channel had nuclear secrets stenographically embedded in so many random images they were ordered by the Pentagon to destroy it

[desert dagger]

that sounds like a movie plot - images generated by sd 3, animated by luma labs

[fervent thunder]

I think its cos
come discord servers want less channels

[shell tendon]

They hid all the archived content that was only visible to ppl that wanted to see it, so it's not like it created clutter

[fervent thunder]

ah I see

maybe its something else
they are trying to subtly push people off stable cascade

[honest mica]

I hope responding to a message is not pinging or offensive in your opinion, we are all here for a dialogue, but @shell tendon , @spare fable and many others are bringing up good points. I myself want a place for cascade too. Let me repeat my message that I posted in #🏞｜general-with-images yesterday: "At the moment we don't really know where to go with the cascade topics. It's just all over the place. A dedicated channel, or a reactivation of the old cascade channel would be helpful in my opinion."
It has become again an actively growing userbase that posts in every channel. I don't get why such a "highly important" channel like #🏆｜winner-gallery is still around, if it is just for the sake of decluttering. That's my 2 cents on this.

[nova lily]

Do you need to worry about were loras are in the prompt and do they need comas to separate? ty

[desert dagger]

no. just use the keyword that activates them. tend to put them at the start of the prompt and just use spaces between them if i'm usin gmore than one

[nova lily]

yea prompt orignzation is quite du=ifficult

So Loras then Scores if were using pony

[desert dagger]

the closer a token is to the start of the prompt, the more weight it has. but the lora's keywords aren't tokens. they just trigger the AI to use the lora's information so they can go anywhere

[nova lily]

ive gotta remember that

Line breaks with the Enter key dont break anything do they, I love to use that for organziation

[dull quail]

i hate everyone

i hate myself

[nova lily]

take it easy ❤️

please feel better
stop thinkging like that

[desert dagger]

does the ascii character for a line break appear in lables in the data training set? if so, yeah, they get tokenized

[potent merlin]

Hello @hidden dagger @swift dagger @gritty scarab and other Team Developers, Nice to meet you.
Can you help me create a storyboard for a movie?
I am currently using OpenAI's DALL-E model to generate them, but they are completely inconsistent.
Is it possible to generate consistent storyboards programmatically using Stable Diffusion API?

[dull quail]

@nova lily I appreciate your kind and human reply

[zenith elm]

Is there a job board I can post a job listing on here?

[dull quail]

is that the real kate hudson

[zenith elm]

ofc not, she is my idol

[dull quail]

hot yoga ?

[nova lily]

so
prompts

prompts

prompts can break prompts?

[desert dagger]

could

[desert dagger]

here's an experiment for you. use this prompt: a boy with green hair eating a red apple. generate that. lock the seed and settings. then put a line break after each word and generate again. compare results

any changes will be specifically because of those line breaks

[dull quail]

what about a green apple

and red hair

[desert dagger]

a hairy apple?

[dull quail]

thatd be interesting

my buttocks are in pain

[desert dagger]

sd 3 doesn't understand the concept of hair on an apple

[dull quail]

maybe you're just not good enough

ill try to get a hairy apple

just you wait

[dull quail]

@desert dagger sorry by the way you are good enough i didnt mean that deeply personal i apologize

[desert dagger]

?? i didn't take it personal 🙂 you're fine, you ahve nothing to apologise for

[forest trout]

What was the #No Access channel? Looks like the chosen solution was to remove it.

[honest mica]

The winner gallery 🤣. ...

[forest trout]

Rip. I guess those aren't allowed either.

[winged rapids]

Hi team, may I please confirm if there’s a token and if it’s listed?

[shell tendon]

Pretty soon we'll be down to this general channel, the mutant channel, and the lolicon channel

[honest mica]

IMO it's not a huge loss in this case, but getting it removed was completely not the point of my initial message.

[forest trout]

I might be jinxing this just by saying it, but I think my semi daily challenges that I post are the main thing that is keeping #🔆｜dailies off the chopping block for now.

[honest mica]

Fingers crossed.The cascade channel had also activity in it until it got removed, if I remember correctly.

[eager shard]

Anyone know the highest quality sampler? Heard 3m sde exponential was good so I did that and now I'm doing UniPC and Restart

By highest quality I mean ignoring the time taken and just producing the best images at 150

Takes me 40 minutes sdxl using restart for 30 images

[undone tinsel]

HI! I need to make a question! IS it possibile to sell compositions made with SDXL in another platform?

[eager shard]

ok restart seems absolutely terrible, alot of abomination creating and limb melding

3m exponential seems to be best rn

[sudden ruin]

Fruit usually

[faint solstice]

is anyone else automatic1111 is completly broken?

like i try to output an image its just stuck at 100% whole a1111 is crashing or it instantly tell me some bs bug

[eager shard]

Idk I switched to forge because it would constantly run out of memory n crash

[faint solstice]

do u have all the extentions with forge?

cus i might just switch as well i cant deal with these bugs all the time

[eager shard]

they have all the normal + extra

[faint solstice]

can u dm me a guide or a link for a download?

[eager shard]

lemme look up the one i used

[faint solstice]

thanks homie

[eager shard]

https://www.youtube.com/watch?v=FKzvHFtc8N0&t=64s

[eager shard]

oop i gotta dm u it

oh wait

did it link

yeah it did nvm

[faint solstice]

u dont have to i hope links are acceptable here xd

thanks alot man ❤️

[eager shard]

welcome

[warm junco]

Dont use Forge

Its outdated

[warm junco]

Come to #🤝｜tech-support with an cmd log and your GPU

[eager shard]

looked it up and apparently its still awful with memory management and that they'll never add it... why??

that's the entire point i switched a couple months ago

[warm junco]

do you mean RAM or VRAM?

[eager shard]

vram

[warm junco]

most people forget to add the right launch args in auto1111 for the best performance

because forge does that by itself

[warm junco]

whats your gpu?

[eager shard]

A4500

[trim magnet]

even if its outdated still works better than a1111 in sdxl,as long as you dont update it it will work but if you want the newest extensions better use a1111 or comfy/swarm/focus

[eager shard]

so it should def not be an issue

[eager shard]

ok good cause automatic1111 was great for 1.5 but as soon as i started trying out sdxl it was awful

[warm junco]

do you have --xformers in your webui-user.bat?

[eager shard]

i did when running it

now im on forge obviously

[warm junco]

ok

[eager shard]

is there any reason why they wont add the modern memory management or whatever its called

[trim magnet]

because a111 is bloated probably not enough time to fix every issue

[eager shard]

rip

hopefully some day

cause i read that theyre making forge way more experimental so ill be forced not to update incase they get some crazy bugs

maybe switch to comfyui but it looks way too complicated for me

[trim magnet]

try with fooocus or stable swarm

[eager shard]

which is good for what

[trim magnet]

fooocus is very minimalistic ui and works great with sdxl,stable swarm is comfy but with a ui

[eager shard]

ill try em both but im leaning on switching to stable swarm just because i like how the ui looks more ( from what i can see )

[vast ingot]

Even the winner's gallery got removed now from the Events section ? niiiice

Maybe keeping this type of content in the archives at least ??

[trim magnet]

sorry they sold the gallery to pay the bills

[vast ingot]

they secured an investor 3 days ago

[trim magnet]

what a generous individual

[vast ingot]

thanks for the jokes there. but I'm still wondering what's the reasoning behind removing all old categories one after another.
Is killing the old member's motivation a goal recently ?
I have stopped making a fuss about the archives disapearing, to keep the spirit a little positive. But damn, why kill everything that made this community in the last few years ??

[trim magnet]

less activity in the server due to all stuff thats been happening in the last months

[vast ingot]

there is a big difference between this server, a discord community about SD, and Stability itself.
There has been trolls and drama all year long since the start of all of SD hype. But money or not, the server is still "funded" by the boosts comming from the community and the staff. It's not one more drama that will change anything about having too many channels

[honest mica]

It was me, sorry.
#💬｜general-chat message

[trim magnet]

to be fair server has been losing members since they removed the free img bot

after that they removed events

and then started removing channels

[vast ingot]

I saw your message. No you did not remove the category though, you opened the "discussion" and the administration of the discord server choose to remove that category

removing low activity channels is a "good" thing to keep people engaged in the most active ones for sure
but removing hidden channels like archives is useless

[honest mica]

Which was of course the most obvious thing to do after the message....

[inner grove]

But it is still so fast...

[trim magnet]

id say server has been performing like SAI itself

[vast ingot]

don't think so, no. A channel with the winners of all the contests could be put into the archives if there is no more contests, not removed. Or a discussion could be started

this is just another harsh move

[honest mica]

That was sarcasm.

[vast ingot]

sorry, I missed it.

[vast ingot]

I'm kind of fuming right now

[honest mica]

It's ok.

[trim magnet]

we just need to secure another 100million loan then we will be back in the game

[vast ingot]

at least, it showing as "no access" means it has just been hidden for now

I mean, people spent so much time in those PoW and CoWs

[warm junco]

it uses less resources but its not much faster than auto with the right settings

on a GTX1080 its like 10 seconds difference

[zenith surge]

What's goin' on guys!

[honest mica]

Yeah, so as the people in the cascade channel. There is so much knowledge hidden in it. And as i said, the community is growing back again. Probably also because of the current SD3 state.

[floral umbra]

https://i.imgur.com/MyAX6O7.jpeg It's safe to assume that steam deck doesn't have enough ram to generate even the smallest image And that was with --lowvram, --op-split-attention or whatever the command was lol

Are there other "i got fuckall memory to work with" commands i can use with comfyui? xD

[vast ingot]

honestly I came back because of SD3 and I feel like being pushed away by one harsh move after another

[honest mica]

At least we have still the ultra helpful voice channels. Am i right guys?

[vast ingot]

yeah lol

and space to push Artisan channels to the top, and forget Dreamstudio ever existed

[inner grove]

Oh yes it is, and indeed it handles memory way better. Right now I am working on an img2img project in 1920x1080 resolution, Forge peaks at 17 GB VRAM for a batch size of 4 at a speed of 10-14it/s, whereas A1111, even with xofmers, is around 20 GB VRAM and runs oom if I do a bacth size of 4, need to keep it at 2., for a speed of 15 it/s

[vast ingot]

Still waiting on my ticket to be "processed" after 12 days in that Dreamstudio support

[honest mica]

#1237459938901491852 dosn't even work

Delete please

[inner grove]

I know Forge doesn't get updated and I regret it deeply, once my project is done, I will do the big jump and start Comfy. A1111 is just bad

I am so scared about that 🙂

[pulsar canyon]

ComfyUI is a too much busy work for me. Although you can do some interesting stuff like 1sec Turbo.

[vast ingot]

comfy is quite scary to use at first, and can be overwhelming

it's the best all around imo
but it's quite hard to start

[floral umbra]

I really wish this one could get more love. As it's last update was last year, and iirc only takes .ckpt. As that one can outpaint an image to be as large as you desire
https://github.com/lkwq007/stablediffusion-infinity

[pulsar canyon]

btw anyone have some good, general prompts.

I'm testing a new Lora and looking for some ideas to test it's versitility

[inner grove]

I know... all the cool stuff has nodes whereas A1111 is still waiting for extensions to be done, one day

[honest mica]

Use swarm. Thats basically comfyui with a frontend. They also have a dedicated discord server.

[inner grove]

Yeah, the nodettes are scaring me, lol

[inner grove]

Well, with what is happening at the moment, I would rather go the full Comfy way as Comfy will evolve into a multimodal interface, don't think Stable Swarm will do that for obvious reasons

[floral umbra]

You don't need to learn nodes unless you want to know what every step does. Just find a workflow that does what you want, and save it's JSON :) I got tonnes of json's for different workflows, and i don't know what half of the nodes does

[honest mica]

Oh don't worry. @finite cloak has it under his control, as far as i know. And he resigned at SAI

[inner grove]

I hear you, but isn't that how people got the malware two weeks ago 😉