B1x1 Bypass Painter (paint or overflow to out)

[tight tundra]

If a color is available its painting, if not its overflowing out.

[inland bluff]

Blueprint Infos :

Version : 1122 / 0.1.1, Blueprint type : Platform, Blueprint cost : 3,327, Platform unit cost : 1
Building count : 513, Building size : 16x15x3, Building tiles : 561
Platform count : 1, Platform size : 1x1x1, Platform tiles : 1
Icons : Platforms, <empty>, <empty>, {RuRuRuRu}

[umbral arrow]

Have you tried not supplying paint then supplying paint again?
All version of bypass painter that I'm aware of with overflow splitter instead of wire suffer from the issue where you cannot stop bypassing once bypass has started

[tight tundra]

Yes, I've encountered it too and it eliminates the error, you have to be careful to reattach it so that you take it from the thinner branch (i.e. where there is more Painter after a split)

sorry for my english

[tight tundra]

B1x1 Bypass Painter or overflow to out

B1x1 Bypass Painter (paint or overflow to out)

[umbral arrow]

Different layout, same functionality, less buildings

[inland bluff]

Blueprint Infos :

Version : 1122 / 0.1.1, Blueprint type : Platform, Blueprint cost : 3,027, Platform unit cost : 1
Building count : 477, Building size : 16x14x3, Building tiles : 525
Platform count : 1, Platform size : 1x1x1, Platform tiles : 1
Icons : Platforms, <empty>, <empty>, {RuRuRuRu}

[tight tundra]

Nice design, I usually upload to the https://community-vortex.shapez2.com/blueprint/search page too, I think you should upload there as well.