#tech-support
1 messages ยท Page 239 of 1
What pushed me to do a full switch was: there was input lag using a controller for a steam game on the windows dual boot, there was no input lag on the linux dual boot. It was probably a trivial fix on windows, but at some point, recognize you are looking for an excuse to switch and just do it for any reason lol.
So it really was the EXPO profile
- Disabled EXPO AI, nothing
- Deleted AMD Radeon Software with DDU and rebooted, nothing
- Disabled EXPO profile, works
now running with 4800 MT/S instead of the advertised speeds of 6400MT/s
Fuck
And I deleted AMD Software
Fuck AMD Anyways it wasn't running
Apparently you can't run games on EXPO AI while AI Snatch is gone. lol
I haven't even downloaded AMD Software yet
Lmao I think Windows auto-updated once again
I'm just short on cash I'll dual boot too
BTW can I run my other games previously installed from Windows through the Linux Bootdrive? Is that possible if ever? I got all my Steamgames + some online games on one drive if ever
If I can I'll prolly cheap out on the drive
No, they can't share steam game download files as far as I'm aware.
But other games can be?
I play NTE on the same drive
if I can then yeah, I prolly can cheap out
I'll try to look up dualbooting and if I can share the same drive for games
Honestly why did the 6400 MT/s speeds become a problem right now
I couldn't tone it down to 5600, 5800 cuz Gigabyte AI Snatch was the only way
To clarify, you can't point your linux steam at the windows steam folder and have it just use that. If thats what you are asking.
But yeah looking things up will answer most questions
Feels funny seeing how smoothing the game's running without AMD Software right now
RIP if that's the case
I think I can reinstall everything here tho if ever
if not this main boot drive
With my Linux boot
the games anyway
1tb for whole windows? 
Because format driver issue? Right
Yeah my mistake
Just delay windows updates permanently

Ain't hard
It will only install security patches then
That's why it's confusing
cuz DDU on Safemode should've prevented that, since they make it so updates are paused right?
How the fuck did it get through
Also reenabled EXPO while not having AMD Software and the game runs fine NVM it crashed btw
????
Fucking hell
running smoothly too
Is this count as bug?
Hi guys, Endfield on mobile is kinda blurry ngl even on the highest settings. Is this a limitation on mobile ver?
For context, the device I use is Samsung Galaxy Tab S11
open the samsung games launcher and check if it is lowering the internal resolution of the game
endfield keeps crashing on startup xiaomi 15t
anyone got a fix?
i tried delete cache and repairing game files
@merry meteor
have you hard restarted your device yet?
@tired ivy
Nop
what's your battery life percentage and heat around the time of the crashes?
you can try restarting your device
Restart done
I did not notice that
let me know whenever you crash again and i'll remind you to take a look at it ๐
Oke ๐ง๐
are there any news on the Discord reboots when playing endfield front? The Devs should notice that the anti cheat is messed up and trying to fix it ..
@karmic cypress, you can enable hardware acceleration at the bottom of the Experience -> Appearance -> Advanced tab, since it's been relocated
- Note: This may cause different issues for discord and during gameplay, such as restarting, graphical/timeout issues, decreased gaming performance, etc, changing if it's enabled or disabled.
you can disable the game detection and overlay too
I am even more disappointed with android tablets now. My friends 1000$ samsung tab S10 Ultra can't use an NVMe enclosure. How can they even market these as laptop replacements?! My phone which came out in 2021 can use an external NVMe perfectly fine.
this does nothing at all. same goes for beta features, dissabled overlay, cleared cache and so on ... right at this point the endfield anti cheat kicks in discord keeps reconnecting until u start discord in admin mode ๐
???
could you try placing new pipes? - https://discord.com/channels/950244160684834837/1506357632158531584
Already tried that in another spot in marker stone. Some spots let me remove pipes, some do not.
I think due to hitting level 3 in marker stone messed with pipes that got stuck by the changes
Placing new pipes works tho
have you attempted to delete the entire pipe both in top-down and third person views?
Only in top down. Gimme a few minutes for third person view. Just woke up

so. third person view won't let me remove said pipes too.
great, right? 
Yes, my zipline spot get stuck previously at least give us warning HG
could you share a screenshot or video of what happens when you attempt to remove the pipe?
if possible?
i get the pipe limit warning
might as well call it The Great Fence of Endfield
you can't select the pipe and move it elsewhere either?
just removed a factory with some pipes. it now lets me remove said pipes now
did you attempt this in the marker stone area?
removed the pipe now and adjusted the line.
yep
how many individual pipes were you able to create at once
as many as i could until i hit that limit
but the moment i hit the pipe limit, i could not remove those pipes stuck in the fence. problem is solved for now. so to speak
do i need to do something?
en not really it prob gonna fix itself after a few days or weeks
dont worry about it

crystal disk now can detect fake samsung ssd which is nice 
the issue with the black screen upon boot after a long shut down
oh
coz it seems the driver quacked a Windows component
as always
which is essential for making sure the GPU driver gets loaded
technically the driver is the one that's quacked
but just to make sure that I do a clean slate
btw i noticed for both amd and nvidia release more stable driver by end of the year instead of the rest

higher chance to be more stable
midway thru the year they kinda don't listen
or they purposely make trash drivers cards can die faster
the studio version 596.36 has higher voltage draw from the cable

is endfield survey up again
For some reason my fps drops whenever Im opening tabs or windows on my PC while the game is up
even after I close them it lasts for a while until it randomly goes back ;-; does the same thing with low settings and my pc can handle the game
what's your current graphics driver version?
laptop user?
i have a 2060
cpu is a 10600kf
on pc!
@crimson aurora
mb ๐ซก this is the version
@crimson aurora
how do i turn off the framerate lock
if you talking about turning off/uncapping the fps limiter, there no real way to do so without breaking ToS
bruh
ok well i have another question
i just opened the game and i have not force removed the framerate lock and the MSI Afterburner is reading over 400 fps
i think its fixed now! turns out i didn't update since jan ._. tyty
Most likely FG is on, im assuming you on a a 50-series nvidia card?
i have a 50 series card yes but what is FG
FG = Frame Generation
ah
aka Fake Frames
it up2you if you want to use FG, just do know it has some pros & cons
with a 50 card it makes more sense to do supersampling or DLAA doesnt it
if desired
In endfield I FG 2x to push past the 120fps limit
||or use a ram injector||
knee deep in the frameussy
Anyone know why my game is taxing the HDD instead of ssd?
Windows superfetch ?
That could be the only thing
If your game is installed on an ssd
I did the download and unpacking in my HDD due to storage limitation but then moved it into ssd and rebinded the launcher so that it recognizes the new location. But the game still runs from the HDD somehow, my ssd was at 1-2% usage while HDD was at 100%
But if i unplug my HDD manually... It actually runs from the SSD just fine
Then there are some files remaining on your hdd remove all of them
Literally deleted everything. It was in a single folder.
Is there a file somewhere else?
Pointer?
Even checked appdata and locallow ?
Otherwise that should be everything
Doesn't this thing only exist in main/system drive?
Sometimes there is a 2nd link from main driver to the secondary(slave) drive
But never hurts to check
Alr lemme try
also make sure the path to your ssd is correct and verify the game integrity as needed
nothing else pops up in my mind other than those
@toxic atlas Forgot to ask but can I run Minecraft on Nobara?
Wait
Maybe it's useless to ask since I forgot my Minecraft is on Microsoft store
Either with the official launcher, or with prism launcher
Both available as flatpaks
Just look for Minecraft in the app store
Ok, will do
what version nvidia driver the recommended to use for endfield for free stuttering issue?
specs and current driver ?
3060ti 32gb 5600x using 591.74 it doesnt have significant stutter but sometimes it stutter a bit
596.21 is recommended as stable driver for now
make sure to use either ddu or nvidia their custom uninstaller
where i can get the custom uninstaller?
should be on nvidia their website nvidia cleanup tool
otherwise use ddu
ook thanks will try that ๐
btw is there an oldest driver that stable
i need to balance Wuwa, ZZZ, Endfield, NTE and my concern is indeed Endfield kinda build different
i know wuwa runs alright on 596.21 and zzz but NTE is kind of broken as of now
with all sorts of drivers
the 591.74 run fine on wuwa, endfield tiny bit stutter not frequent, NTE fine but high temp, ZZZ stuttering
with this i dnt need to restart like DDU right?
the cleanup tool will normally still need a restart
but yeah you'll have to see if these drivers will be close to what you need overall
it won't be ideal on any driver really
right if its too old driver NTE would be problem
kinda want to try 566.36
up to you what you want to try so far my 5070 ti does fine on 596.21 on all these games
but yeah the NTE devs have a lot of issues right now with their game
so i would not blame it on the driver regardless
also on 596.21, NTE, ZZZ and Endfield all run fine (3070)
how is the temp no Endfield and NTE? got past 60C? is it near safety limit 80C?
did the 3070 get the variable rate shading on NTE ?
didnt check lmao
i think somewhere between 60 and 70? i dont usually run my games with performance graphs. honestly my cpu is the bigger issue with the heat
have a nice day fellow gacha-enthusiast 
i am currently building "other" factories
another factorio bonanza ?
foundry
yeah i should continue my nullius 2.0 playthrough in factorio sometime now that its finally out
that's fair i was replaying the dead space remaster yesterday
sad they won't make a continuation
it was a really good remaster
ive heard it was good, yeah
ive been playing some motorslice as well, nice little 3d platformer mostly with shadow of the colossus bossfights kinda
interesting i'll check it out along with foundry
theres a free demo with the first level after the prologue
Sounds good
nextfest was a really good idea by valve because now we get demos again
i mean it's better for the consumer and the developer in the long run
yeah but demos were nearly dead for over a decade
i really missed demos
pragmata demo really made me buy it
it was enough of a experience to just make me confident in the product
yeah, the demo was a good introduction
the 3d printed nyc from chapter 2 would have been a cooler visual to end it on tbh
the "outside" sections in general are visually impressive in the game
oh yeah those really look nice well back to code checking
i hate how slow she talks in the dialogue scenes ahhhhhhhhhhhh
Korean's tolerable to me
Unless you meant her choice of word
well the game really doesnt like you skipping dialogue and combined with her slow speech im often really just waiting for the audio to play because i cant skip to the next line (playing in jp)
Ahhh, I play the dialogues like a scene so I didn't really get to see the skipped dialogue tbh
I saw some that were goofy from frens
i alwaysd get mildly upset when the characters names are different. in this case the character say "requiem" but the subs say "lacrimosa". its the same in ZZZ with Rin -> Belle and Chinatsu -> Sunna and whatnot. Stupid
yeah i always find it odd just keep it simple and clear and don't change it if it's not needed

upd: 596.21 for endfield is good and smooth
no stutter
fine temp at ok state DX12 dlss on super performance - balance more than that increase temp quite a bit
around 55C overworld and Dijiang around 47C at 60fps
for 120fps temp increase quite alot around 65C to 70C ๐

i'm not sure if fps limiting works now for nvidia gpu's
did not test it yet perhaps it may be a nice middle ground for fps and temps if you are worried about it
Yeah but did you notice her name is an entirely different thing in the JP dub? 
Why is the speed capped like that
Nvme external?, or just flashdrive ?
Trying to move files to install Linux cuz fuck Windows
Emptying that USB Drive rn
I'll prolly need help later @toxic atlas
My PC crashed ๐
Do the events expire today or tomorrow? I finished them but didn't claim the rewards. I'm downloading the game on my phone but updating is pretty slow.
That normal, what distro you planning use ?, cachy os ?, arch ?
Was thinking Bazzite but going for Nobara as per suggestion
I can't run Gigabyte AI Sn-atch, cuz that breaks Endfield
I can't run on my full EXPO profile, else NTE gets a lot of microstutters
And sometimes AMD Software just crashes entirely
Bazzite can be a real bitch the moment you want something slightly more advanced
Since you can't touch the system files out of the box
i mentioned that a couple posts down. they do the same thing in zzz
Also Gigabyte AI Sn-atch is just shit in general
Snatch ain't filtered here, that's just the NTE discord being weird
Yeah I read it's an immutable system, so can't modify stuff like a dev
Nah I'd be assed if I forget I'm in NTE Discord
Cant talk about Hideo Kojimas Snatcher there?
No 
Bazzite for gaming would've been good if NTE and Endfield was on Steam too lmao
But since they work on Standalone launchers, no good
Maybe if I still played Wuwa, but even then I'd need to install NTE and Endfield separately
No? You can just play them both no issue
Is it cause users can't fix things on the fly?
Discord quests are a pain on Bazzite though
Need to install Discord in a distrobox instead of flatpak for quest game detection to work properly
anyways just waiting 3 hrs more
It's all in userland, no issues there
So I can still fix them on Bazzite?
There's nothing to fix though
It just works, Faugus, DW-Proton, install and go
Aaahhh
Well I don't really do Discord quests
Wait
I just realized
With Bazzite I can't mod
I forgot to ask how to add dwproton on faugus
Mod what? Steam games?
Just install it for Steam in ProtonPlus
Unless you're on some debian-based distro
Then you have to move it into the proper path everyone else agreed upon but debian-based distros
=_= don't mod Endfield
Fuck
The fuck are you transferring shit over USB 2.0?
It's technically 3.2 but I think it's cuz my USB hub is 2.0
I didn't even know until initiating it today
that means its technically 2.0 instead of 3.2
I can't place it on the back
Will it be safe to place it on the uhhh
Bios Flash?
It has USB 3.2 still but has "Bios Flash" on it too
should be
That port is red 'cus it's the bios flash port, it doesn't mean it's actually a 3.2 port
Also yeah it's safe to use the bios flash port for other stuff
might want to check if its 3.2 or 2.0 in the manual of the mobo
Or just the spec sheet online
I know about it being the flashport, I just dunno if it can be used on other stuff that I needed clarity
It's the designated "use this one if you royally fucked up" port
I know there's the 2.0's up there which I use for some peripherals
with a switch
anyways File Explorer died
You said you got an MSI board?
Gigabyte
Ryzen?
What's the EXPO-rated speed? Of your RAM
If you meant for my Mobo's
Oh
I had it on 6000 MT/s
For max EXPO speed it's 6400, but I can push for 6600 with EXPO AI
NTE ran smoothly. No microstuttering anymore at 6000
But yeah cuz AI Sna-tch kept crashing on me, I think that's what's killing Endfield right now
-# please do not use auto overclock or EXPO+ crap
I htink I even saw on Reddit that other Endfield players had the same issue around launch
Stick to stock EXPO
Cuz of higher clock speeds
Not all RAM is made equal, stick to the speeds on the box
Your memory controller's native speed is 5600
Well am switching to Linux anyway so I def won't be using it anymore
huh? But it clearly shows 4800????
When I disable my EXPO/EXPO-AI profile
That's the base DDR5 speed
The CPU memory controller runs best at 5600
Anything over and you're applying a slight overclock to your CPU without realizing it
I didn't know that was an option lmao
I don't have other EXPO settings and kinda scared to manually tune mine
Just turn on EXPO and set the ram voltage a tad bit higher
Since some mobos completely fail to self-regulate that shit on Ryzen for some fucking reason
usually just clicking the empty desktop will restart explorer automatically. if win+r doesnt bring up the run dialog you can also do ctrl+shift+esc for task manager and do file -> run new task
I want the ram voltage lower tbh since I run 67-74 C
But I haven't done tweaks yet
Outside of the ones I needed
CPU temp? That's completely fine for Ryzen
Yeah
my ryzen usually runs at 80
I guess so, that's basically my temps even when loaded
bruh
not like its an issue
If I truly push it (code compilation on all 32 threads at once) I reach 90-95
But that's still fine
good old prime95 also does the trick
Nah just compile any chromium-based browser 
hell yeah
@misty osprey
yo
could you see if this is still happening for you? https://discord.com/channels/950244160684834837/1506626796169199636
yup, give me a sec
and could you try repeatedly verify the integrity of the files by using the Repair function to see if it resolves?
Still occurs, did 2 game integrity checks from luncher and like 6 repairs
Also checked if maybe i had something in AMD software but i have everything disabled except antilag which doesnt change anything, also if you need to know i have max settings 60fps no vsync
Veryifing my game files seems to have fixed my crashing issue. Thanks.
anyone knows if nvidia 596.49 is safe
596.21 is still the best one so far for stability
what's your current graphics driver version?
596.36
@livid stratus
Ok I'll set to 596.21
@toxic atlas so yeah what to do with that. I looked it up and it's about paging file. Would I need it with 32gb of ram?
32gb
Allocate 40 if you want hibernation
Otherwise, 16 will do as emergency memory
What's hibernation in this case?
Basically sleeping the PC
But a full shut down
Ohhhh so basically the shit Microsoft tried to do with fast start up
It stores some of them huh
40 gbs or what?
nah, do at most 16
I don't see an allocation tab for it
you on a laptop you move around a lot and go out with?
if it's just an at-home computer, i don't really see the point of it
plus if you need a secret space to store stuff, plasma (kde) has vaults
aka pseudo-partitions you can create and put files on, that are encrypted with a password
Okk
Ok maybe I should've removed my USB before afking
This normal every boot?
Rather every uhhh
Bios access
yeah that's normal, it's your bootloader
though that windows entry isn't
you got two disks and one got windows installed?
Also does it really say Fedora?
Yeah it did. I tried formatting the drive but IDK why that part never got removed
'cus it's in the bios
we can remove it later
no i meant the windows entry is loaded in the motherboard's EFI variables
Anyways does it really say Fedora for boot option normally?
Ohhh
yeah, 'cus Nobara is based on Fedora
they didn't bother to change that part
Okk
open a terminal and run sudo efibootmgr
After my boot
yep yep, after you boot up
well yeah
sudo means "do this shit as admin"
My Linux password or Windows password?
your linux user password
Hi Max
Okk I thought Windows cuz I had a heart attack
got a fresh look huh 
Get new Linux user 
Anyways this is good now right?
yea, with a Memory_Management BSOD in my head
yup, windows got removed from the bios boot menu

it do be like that sometimes

Anyways I'll update stuff first then install the things I need
Btw I can't use my steam library installed with windows right?
you won't be able to use NTFS (without some pain), if you have them on a partition or drive you didn't touch during install
though most games on steam should be able to run just fine (if you use an appropriate filesystem)
yeah
though you can move games you can fit on your boot disk first, if you don't wanna redownload
make a folder and move stuff in it before formatting
use kde partition manager to format the drive as btrfs
-# main problem is NTFS support on Linux is basically in beta, the fact it works at all to copy files around is a tech wonder
-# it's as if you wanted Windows to read a MacOS-formatted disk
Ohhh I can still move them
Yeah I can do that
This shit wiped clean of Windows anyway and
if you don't mind redownloading, just format that shit
?
Instead of the applications
you don't really need those, unless it's nvidia
what are drivers on amd?
Oh, no need for drivers?
nah you on linux now
unless you run some really, and i mean really obscure hardware, shit just works
IDK why but the wifi just keeps disconnecting now that I'm on Nobara
That's why I thought maybe I need to update it first
just update the system normally
everything through the app store
also set those
can you do an lspci and share the output?
Which segment you need?
the network controller stuff
but there's no identifiable shit in the output, just lists what PCIe devices are active
might as well lspci > file.txt & send it here
Don't have discord yet
oh... right
or... install it from the app store and login with qr?
should be called Bazaar iirc
None here
what abt Discover or Snap?
you know what... how about we install it through the website
Found it on Nobara welcome app instead
Also now I understand why I don't see it
Bazaar
sudo lspci -s 0a:00.0 -v
just want to check if it's using the proper driver
also the built-in app store should be named Discover, part of KDE
Lmao I keep disconnecting
Idk if I entered correctly or if I disconnected again but yeah no response yet
It asked me for password but nothing
is the ID left of the wifi card in lspci not 0a:00.0 ?
I can't use Ethernet too

It is 0a.00
No I normally don't use it, cuz too assed to route a wire to my room
and you saying this doesn't return anything? 
It returned something asking for my password
Just type your password
I did, 3x already
hit enter after? lol
Lemme retry

time for realtek shenanigans
need to check something, one sec
Gonna restart first since the programs that downloaded finished
nah that was last night

@misty osprey, what's your current graphics driver version?
lsmod | grep rtw89
That's the feedback
so my main issue is assuming everyone knows how to use vi/vim 
If know you will stick into it
sudo tee -a /etc/modprobe.d/rtl8851be.conf >/dev/null <<EOF
options rtw89_pci disable_aspm_l1=y disable_aspm_l1ss=y
options rtw89_core disable_ps_mode=y
EOF
after that, reboot
the very friendly text editor
yea it did
How to close vim 
[Esc], [:q!]
I don't even know what vi/vim is
and hopefully you won't need to
basic text editor, like what Max Said
just printscreen will do
starts the spectacle app
okk
32.0.31007.5012
Win11 26.5.2 
what aspm Max? ๐ค
ahh, okay...
@misty osprey, revert to driver release 26.2.2 by following this tutorial ๐
- Click here to navigate to the [[AMD DDU Tutorial]](#tech-support message)
how do I tell which ones need updating
ogeh
WebView 
Yeah it's not having disconnects now
what setting on mobile is responsible for blurry graphics?
I dunno if you still have the problem but without anything you can switch controller modes with long press of menu button and just works 
render resolution scale
can i increase anti-aliasing or is that not possible? the edges of structures arent lined up
AA will look better at higher resolutions
hi guys, is Endfield on Sata SSD okay?
Asking for my cousin
yea, that's fine
the performance gap in gaming between a sata ssd and an nvme m.2 sdd is small
as long as it able to run tbh... but recommended ssd
Well he told me Endfield lags which it should not on a 3400G and GTX 1060
so I checked and I could only see HDD as an issue
welp whatever Sata SSD is fine
thanks guys
if the hdd speed is slow, it can stutter
yep hence why I said let us try with my spare ssd first
I tried running Endfield on HDD to visually see what it looked liked
My eyes cried
at least it only stutter, cant be worst than the shit i see before
It's not necessarily on the HDD max speed, but the random access speed
Random access will always be really slow on HDDs
@toxic atlas speeds on wifi is slower, it's fast but it still generally gets cut off. IDK what happened
Got to installing this now too
Anyways I go eep
install wireless-regdb with sudo dnf install wireless-regdb (if it isn't already), then reboot
iw reg get should return the supported frequencies and the country

@toxic atlas 
pretty sure that does not works since the d not capitalize

Can someone explain me why my GTX 1660 super got 30 fps default and my friend laptop GTX 1650 got 60 fps default? It because of CPU or something? I really need answers.
Mine is desktop
nvidia app things
@devout cloud
yo
?
what's your current graphics driver version for both cards?
could you check to make sure they're both updated to the latest versions
which version is that
@devout cloud
you'll need to revert anyways as the 596.49 driver has issues
ok but i already tried it tho
whats is cpu and your friend's laptop cpu and are you getting 30fps ingame or the dafault settings is showing 30?
mine is default 30 my friend is 60 both default
as i remember his cpu is ryzen
default doesnt matter i have a 4070ti and i get default 60 fps when i can run 120 easily
just set the 30 to 60 manually
the default you get is from nividia app giving settings to your build 
always 60 fps bro i play others games easy 60 fps but why this game
i see
just set it to 60 manually

Nividia app? Nvidia App 2 confirmed
is there anyway of changing the game to show playstation ui instead of xbox as i do not know the xbox button layout well? I launch the game via steam and proton using the guide in this server as I'm on linux
i wonder.... does steam input works with non-steam game on linux 
cause i know Endfield does have Dualsense support
try disabling steam input & see if it works
not sure too much on linux so i trying to figure things out
nahh sadly not. controller can still pull up the steam menu but thats it so steam does have the input enabled. luckily some of my muscle memory is starting to come back so it shouldnt be to bad as long as i dont get xbox x button confused for playstations XD it was a shot in the dark question but always worth asking just in case ^^ Thank you though :DD
hmm... im out of idea then
@toxic atlas , can help when you free?
do any of ur game just crash if u keep performing gear assembly and gear artificing?
@wispy grotto, follow these two tutorials ๐
- Click here to navigate to [[Reliability Monitor Troubleshooting]](#tech-support message)
- Click here to navigate to [[Windows System Corruption Fixes]](#tech-support message)
so this did happen before?
you can probably resolve it by verifying the integrity of the files, but there's probably a different issue on hand as well
Worked, thanks
Sure
yo the dlss method doesnt work anymore any other way to allow the game to turn on dlss
The only other way to do it is wipe the driver with ddu and put it to read only with the method
Not much else you can do honestly
Is it safe tho..sounds risky
It's safe but up to you if you want to try.
do i personally think it's worth it ? No
Only wired use is supported at the moment for PS5 controllers on Linux
HIDRaw needs to be enabled in proton (which should be by default in DW & GE), and steam-input disabled for the game
If you got protontricks installed, you can check the state of the controller and how it's detected by running control joy.cpl inside the prefix CMD
DualSense should be Direct-Input, Raw Device
@proven sundial now that I think of it I didn't get to try the wireless functionality on DWP 11 
More stuff to do at home tonight

ok something is really wrong with my laptop
How is it that bad ๐ญ
it was not that bad most of the time
I should get 110+ fps around here and there
not here somehow
I think i just have a massive cpu bottleneck
Drive throttle maybe
3X framegen ?
oh yea
it used to be stable 60 also
here's the not upscaled fps
not much of a difference yea?
so my gpu is fine
standing at the same place
what's your current graphics driver version?
latest
@fading slate
it is 596
so do i downgrade to .21?
i'd recommend upgrading your graphics drivers to 596.21, as each 595.xx AND future 596.xx versions have stability issues, and it also fixes certain issues that are present in previous drivers ๐ https://www.nvidia.com/en-us/drivers/details/267157/
when downloading the drivers -> select custom installation -> clean install
follow the nvidia control panel settings guide after clean installing that's above this link after you've finished
- Click here to navigate to [[Graphical Settings Information]](#tech-support message)
Hello Xomori my laptop got f-ed again
i assume the voltage regulation on 596.36 and 596.49 is still not fixed
since another person had the same issue
Right, let me try to downgrade
Else i'll assume it's my cpu that's the bottleneck
the new map is soooo beautiful and intensive at the same time gg
newer 4000 and 5000 gpu's are not suffering but the gtx 1650 M is on the backend
so lucky my 1060 on my pc stopped at 592 
just See what 596.21 does it's a lot more stable normally
i know 40 and 50 is superior but i don't think i will upgrade to them anytime soon
just gonna aim for 3060 for now then my cpu (i5 9400f) then the gpu again (not soon)
if you can only go for that GPU for now then sure
it's gonna still be 5060 i think when 90 come out
i can actually
but i dont play anything that needed that much "power"

understandable
just when you do upgrade overshoot the performance you want by atleast 20 percent for longevity sake
sure i can buy a 5060 right now but do i really need 2000fps on osu? (just a 2d rhythm game)
Also the i5 9400f still a thing to be considered upgading)
Hearing about the AI shits make me just want to buy 2 1080ti with SLI then enjoy my elderly life ๐ญ
So, UV?
What's overshoot? 
You mean 582?

Yes ๐ฅ
it's just better to buy a gpu that's a little more above your demand
and well definitely go with price/performance if possible
my demands are (stardew valley)s 
yeah but your heaviest game is ?
I think A9e is the most intensive game i ever play
just cs, osu, a9e and uhhhh
Might aswell aim for that then
youtube
the 1060 with OC already gave me 120+fps stable 
It's just im not at home
had to stick with this generator with screen
I see well just make the logical choice then
Do you think 3060 is still good?
for like, 2 or 3 more years
i do want to get the 1080ti and stop but i do need some RT things for my school projects
get the 12 GB version then
-# the 3060 is a 6yr old card now 
When the fuck did that happen

Ofc
But yea my demands are low
Mostly cpu intensives
I hate the rtx tax
@fading slate, what's your monitor resolution?
1080p

u saw nothing
Dude playing Mario Kart at some extreme speeds 
fr typing on the joycons 
What would 1080cc even look like 
i wouldn't personally recommend going for a 12GB card which is already 6~ years old, and definitely not if you're planning to use it until it's 9~ years old, granted you can afford it
idk maybe sth like this
Relatively speaking this card is fine
i'd invest in a recent graphics card for 1080p
easily might as well get a brand new 5060 at that point
better value, performance, longevity, etc
i will, later on
Or if you don't care about the raytracing you could also look into a 9060 non-xt
i still need nvidia for work so...
Pure cuda ?
else i could just get the 9060 yea

told ya i only play like 3 games
my 1060 is still fine but like it's already ~10 yo
it stopped developing i saw
yes i have a non 30+ gpu with no usb-c power input
so no
https://github.com/vosen/ZLUDA
Latest commit was last week
There's even recent preview releases
lol well on my end there is no updates last is 25 october 2025 strange
๐
That's last stable release
Click the releases tab 
wait
brathuka i know what i am seeing

my english is so bad lol i'll just skip it

time for a browser reinstall
Hi Lotus

because you need to collect otherwordly information
same
i know what you are trying to do
i touch it once every blue moon
yet yap about my laptop being suck here everytime

losless scaling go brrr
Is this rich people's problems?
well i'm sorry
it went down to 20
I am joking ofc
For the same reason I'm still in the NTE discord
There are some cool peeps in the tech-support channel 
you need my dead laptop
batteryr dead but 1060 gpu
so already installing the 596.21?

yes, sorry for the white mode
the eagle being suck again
hope its better then this 
battery dead?
i can turn it into a fucking XBOX
or a server

I am turning it into wii and gamecube console

Clustering for HA 
too lazy 
but usable if i have time
can you fix it for me 
lmao
I ONLY FIX WHEN YOU ARE USEFUL AS A TOOL
What ya need
tool.Xomori = 0

TRUE

i should go work
or will just waste more time here 
just keep the laptop in working order i have some custom mobo's from china imported
go
else i'll haunt u at work if you're late
teach me senpai
๐ฅ
Im being deadass serious about a video that no one gonna watch lol
where do you live again ?
on youtube?
wait live or live
lol wait
streaming or living lol


Vietnam, Youtube 
my god its already 40c and even more hot? 
English be englishing
Yea im from ๐ป๐ณ

You can see it in my bio yea
i tend to just ask really to be 100 percent sure
I dont do joke pho no reasons


Well, fr nah
sure everyone said it at start 
Not me
brother i wanna go to north russia 
then wont have to buy a cpu cooler 
just slap a heatsink and open the window 
Nobody knew i was from vn without asking or checking
I just like the vibes, being complimented as being a vietnamese is so good
So nah i don't joke about vn
That's t-shirt temps for me
how ?
hang on let me try restarting
ok it's been loading for quite a while
then said sth like "unable to open the application, please reinstall bla bla"
in safe mode ?
yup
Uninstall & reinstall it from Microsoft store
Because the fucking Nvidia app is UWP
weird, my friend's pc when running endfield with vulkan got high cpu usage and lower gpu usage. but when play with dx11 its normal 60+fps, His specs is 1650 super R5 3600
could be VRAM Though but im not sure
aw man
try disabing his nvidia overlay off
so ddu again or just uninstall the app
Try just the app for now
alright
App it is
nope, he didnt have nvidia app installed
could be driver

High CPU usage is expected for Endfield, especially on Vulkan
Dx11 is meant for really old hardware and GPUs
i mean
the 1650 is fine
it's just the r5 3600 is old
ya know
so high cpu is expected
dx11 will utilized more of the gpu so
yeah 1650 is alright if you just play gacha games or comp games
with dx11 or vulkan?
also WHERE
anything works for you
it's not "what's better"
it's "what suited you most"
if dx11 gives you higher and more stable fps
then go for it
Try vulkan first if have issues use dx11
the pc race is not "what's the meta"
It's just trial and error
i should stop saying nonsense lol
No I mean really old
Like GTX 900-series old
anything > 8-10 y/o are considered old
so the 10xx+ are not old yet
well he had problems with vulkan so, im just going to tell him to stick with dx11
i mean endfield vulkan uses async compute
so that could be a big factor

The 10-series is 10yrs old 
Doesn't even get driver updates anymore
someone with a 3600 also had same problem gpu wasnt getting used much
told guy to disable nvidia overlay
magically fixed
๐ฉ
yea
not the 1080ti thou
wait no it just did
alright so >10 years
Alright well i'm off to get my toxic shit injected at the hospital
hope it works later

wait if i m right they do get updated once every 6 months jut secuurity patches no?

uhhh
maybe no?
wait they do
some small patches and bug fixes
welp shitty drivers once again








