S3

[warped shore]

This passive is not working properly

[worn vault]

Hello Traveler, thank you for taking the time to get in touch with us and for sharing your concerns.

Regarding Sacredeia issue, it would be highly appreciated if you could provide us with a screen recording so we can locate the issue faster.

Looking forward to your response!
Thank you for support and understanding!

[spring thorn]

Passive dmg 100 Max

[rotund torrent]

Same there

[worn vault]

We are really sorry for the inconvenience caused to you! I have submitted your feedback to our team for further confirmation. We will inform you as soon as possible after getting further reply. Thank you for your understanding and support!

[warped shore]

Yea it’s stuck on 100

Dosent matter how much atk you do it’s always on 100 and thets whay she don’t do dmg as she should

[quiet oasis]

i was gonna post the same issue, good thing its already been submitted.
if the passive damage reaches 100 dmg per tick it becomes like that (100dmg) per second.
instead of when it was less than 100 (example 80) it does 80 dmg per 0.5 sec = 160 per second = higher dot. obviously bad bug.

even after she used a skill and added more corrosion dmg the dmg tick still 100 dmg per second. very very very bad damage over time.

[lavish gust]

Same here. It's stuck on 100.
And I've been missing this damage in 'Zeitstrudel' at all.
Does anyone else feel like her passive skill doesn't work in all boss fights?

[warped shore]

It’s oke. Just fix it and we will be happy… and thanks for this corrosion team

[quiet oasis]

if we compare Hvitars dot with frost debuff, its soooo much faster and scales perfectly with her attack, no issue. if it helps they can review her math and copy it to our lady here.

[worn vault]

Dear Traveler,

Thank you for your inquiry. We would like to clarify that the effect of Corrosion is not an instant deduction of blood, but rather a gradual drain over time. Specifically, Corrosion causes a loss of at least 2% of blood per second, with a minimum deduction of 200.

In your case, as your current corrosion damage is less than 100, the deduction will be 100.

We understand that further clarification on the Corrosion buff is needed, and we will provide detailed explanations within the game to address any confusion.

If you have any additional questions or concerns, please feel free to let us know. We are here to assist you.

[waxen oracle]

hey Lydia, the team did wonderful job with adding clarification with Ice crystals from Ice blast team with good visuals , could we get visual indication for how many corrosion stacks we have on a target ? 🙂 or it's not in the works yet

[warped shore]

Oke thanks

@worn vault

[spring thorn]

Всмысле минимальный, если атаки больше 1000, пассивный навык добавляет 10% от атаки и в итоге получается МАКСИМУМ 100 урона

А вот как раз меньше 100 она бьёт, если атаки 999 или меньше

143 atk - 14 corrosion dmg

199 atk - 19 corrosion dmg

1283 atk - 100 corrosion dmg
10%-128

При том ещё одно замечание как только урон коррозии набирается больше 100, он начинает бить значительно медленней

[quiet oasis]

it seems like we got a fix in corrosion damage in general and it show a green bar now in their hp to indicate the corrosion dmg. problem is her passive is still not working. corrosion dmg ticks per sec while her passive ticks per 0.5 sec. Also corrosion dmg per tick seems a little too low, takes too long to be consumed. It would be best to like have all the corrosion dmg be consumed within 5 or 10 secs OR have it tick to like 10% corrosion per second.

[worn vault]

I'm going to check with the tech team again. Please wait for a while.

[worn vault]

Traveler, upon confirmation, Sacredeia's passive skill +10% Attack Corrosion effect increases the corrosion value possessed by enemy targets. It does not immediately release in the form of damage but accumulates and is later converted into damage based on the aforementioned rule over a period of time. Additionally, the deduction of less than 100 layers at a time is because the skill applied just over ninety layers, so it deducted just over ninety layers. The difference in speed is because the corrosion logic triggers the deduction upon applying the first layer. Each trigger settles all layers, so at the hero's passive interval of 0.5s, when the attack increases, the layers may not have fully settled, resulting in deductions occurring at the base corrosion rate of once per second. Many heroes have skills that can add corrosion buffs, and the number of layers depends on the skill's effect. If you wish to enhance the corrosion effect, you can increase attack or deploy more corrosion heroes to increase the total layers of corrosion, even reaching thousands.

[spring thorn]

про скорость понятно, урон наносится 1 раз в секунду,
урона пассивного навыка мало что бы активировать слой, поэтому он бьет каждый раз при нанесении
за разъяснение спасибо

[spring thorn]

То есть урон коррозии складывается в общий пул, и делится на DOT урон,
Какую часть от общего значения он берет для нанесения урона?

[worn vault]

Corrosion gradually diminishes over time, with a minimum loss of 2% corrosion per second, and a minimum deduction of 100. Additionally, if the current 2% damage from corrosion is less than 100, it will display 100.

[spring thorn]

Thx

[warped shore]

I dosent work with boss I bring boss till zero but he still has the health what is under corosssion I’m gonna fight the boss and record it it don’t work

[worn vault]

Dear Traveler,

I'm sorry that you encountered this issue. Regarding the situation you mentioned where Corrosion Hero did not end the battle after reducing the boss's health to zero, I would be happy to provide an explanation.

The specific damage rule caused by Corrosion is as follows: Every second, 2% of the current enemy target's Corrosion value will be converted into damage, with a minimum conversion of 100 when the conversion value is less than 100. Therefore, the health reduced by Corrosion is not deducted immediately, but gradually takes effect over a period of time. Additionally, in extreme cases, if the boss has no normal health, it will start deducting health from Corrosion (usually shown in green when health is being corroded).

I hope my answer helps clarify your doubts. If you have any other questions, please feel free to ask me. Wish you a pleasant gaming experience!

[warped shore]

@worn vault oke because thets what confusing me. He’s health get to zero and then ther is only the green bar left … and he keeps healing

[worn vault]

Dear esteemed traveler,

Thank you for bringing this to our attention.

The numbers displayed above the health bar do not represent the actual health remaining but include the impending damage from Corrosion effects. As Corrosion damage is applied gradually, and the boss has the ability to heal, this can create the visual impression of the health bar reaching zero yet the boss continuing to heal.

We acknowledge that this visual impression can be confusing, and we plan to address this in the next month's update. We aim to optimize the display so that the numbers include the actual remaining health value which the Corrosion damage yet to be deducted.

If you have any further questions or concerns, please feel free to ask. We're here to assist you.

[warped shore]

@worn vault oke im good now I will wait till update but you people destroyed corrosion now it’s not competitive anymore not even for top 20% i beat with rare hero’s corrosion dmg in vortex… well you can’t let people invest money and then writte how the skills works… I’m gonna wait thet update thanks for those replies

[quiet oasis]

lol i also wanted to report this but seeing as little action was done for corrosion i didnt bother. yes it shows 0 so is it supposed to kill an enemy once the hp bar reaches the corroded hp? (insta kill like hvitar passive, its op)

[quiet oasis]

yeah its practically useless if we wait for corrosion to settle and kill an enemy, we might as well kill them with dmg. coz if corrosion settles at 2% of dmg per second then it takes 50 seconds to consume it all, thats like 2.5 ulti casts (heals too). and then since we keep on adding corrosion dmg overtime, eventually, all the hp bar turns to green. if that happens then it obviously means that its an ineffective and inefficient dot damage and it reaches to a point that 100% of the enemy hp has become corroded... and it still cannot die. lol.

for a dot to be efficient it should settle at a faster pace. as i said 10% is a good start. that means it takes 10 seconds to consume all applied corrosion damage and everytime a new corrosion damage is applied it has a separate timer (as are other dot damages). that way the enemy will still have time to heal their allies out of corrosion. If its too fast make it 5% so it'd be in the same duration as the cooldown of 1 ulti charge. TLDR just make that 2% into 10% or 5%

[worn vault]

Dear Traveler,

I will note your feedback on modifying Sacredeia's skills as suggestions and forward them to our development team. They will try their best to provide you with a better gaming experience.
If you have any questions, please feel free to contact us.

We hope you continue to enjoy our game and have a nice day!

[warped shore]

Thet was my point because bosses thet can’t heal they still heal

[quiet oasis]

Exact exxample of what i was talking about.. Look at all them hp.. Its all green and yet they just wont die 😂😂

Corrosion isnt doing anything. Just a trick of illusion. 😆Its harmless

[vale meadow]

And why would they die in such case? The only way heroes die in this game (save for skills like Hvitar's execution) is when their HP bar is empty.