#🔨base-gamma-support
1 messages · Page 152 of 1
let me double check
one drive? ohhhh crap it mustve went there by accident. ill try it again i have lots of files it confuses me
If you follow #old-how-to-install it tells you where to safely make the folders
Now it says that gamma data is up to date
ight ill try again thanks
ok, now hit full gamma install
So now I just click full install?
Step 8 to be specific
okay I might just be an idiot lol I had been playing the game with the mods you’re supposed to disable to run dx8 but i renenabled them and ran dx11 and it works haha 😅 problem solved
i mean, ez fix
What might "Starting engine...
THM chunk 2072 fixed, wrong size = 39, correct size = 38
THM chunk 2072 fixed, wrong size = 42, correct size = 39"
mean, GAMMA was running fine last week but after weekend, it crashes to desktop on startup.
This much I sniffed out from anomaly log file
it gives quite big list of about 20 wrong sizes.
Post the log please
That's the log after a crash? It looks like a log that didnt crash if I'm not missing something
The chunk thing is pretty normal
!crash
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
Yes and yes.
I click run, wait for a normal while, screen goes dark for a bit too long and then it just returns to mod organizer.
get the crash again and immideately post the new log
got u, 2 sec
Please if someone can help me out i put the framrate optimisation command in my console and now there is every 1 meter like group of bandits or some animals mosnters
🤷 that's a successful start up as far as the log goes but evidently not the case so something else is amiss that I cant solve lol. I'll let the big boys take over...
you are wholly correct and that log is telling me... not a lot
!modlist send modlist pls? and also, where is your GAMMA folder located
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
Do you know fix for this. I put the framrate optimisation command in my console and now there is every 1 meter like group of bandits or some animals mosnters
ever time i enter the red forest my game crashes i dont know how to solve it?
is borderless that better than fullscreen for gamma? I've been hearing so many people say it
I have no Idea why but the game just crashes after like a minute playing...
2 core for 300+ mods seriously idk if its enough
Im missing 1 mod, and have installed 5 times ._.
!full you're missing 3 mods and have disabled two mods from the default pack - I'd start with a full install
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, and any that need to be updated will be updated.
To Perform this follow these steps:
- Open your
G.A.M.M.A. installeras admin - Click "
Download G.A.M.M.A. data" - Click "
Full G.A.M.M.A. installation"
did you change or add any mods
nope
omg i seriously got hype for this and now what should i do
i will try to load old save to see if ihelps
has anyone ever noticed how sun shadow quality higher than low just breaks the shadows completely? tries to make it look diffused but i really thought my eyes are dying, it physically hurts me to look at the shadows
here is a link to a comparison https://imgsli.com/MTMxNTI3
maybe there is a fix ? i went through all su nshadow quality settings, this is a comparison between low and ultra, even extreme looks like that hto...
nope
!crash send your crash log here then
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
they are
is it normal because a mission or i fucked up something in conor every corner a group of bandits
like im playing cod spec ops
but im playing for over 4 hours didnt even finish 3 main mission those yellow ones on pda
gamma is meant to be quite hard, if you think there are too many bandits you could turn down the stalkers population factor
hello i re did all the steps and i keep getting the same error and i dont understand why it says one drive bc i changed the folder and everything but still gives same error
ahah nvm bois i got it i fixed it by enabling more mods
it IS unusual, but you can also roll back the #old-framerate-optimisation changes - the big ones are the mods changed and the visual effects
But that's what's weird, those shouldn't touch gameplay at al
you're literally the first person I've seen linking these two issues
worse case scenario you can turn on debug mode > F7 menu > Delete Common Squads, which deletes all randomly spawned NPCs, or use debug menu to spawn an emission
which does a similar thing
did you enable like... warfare mode
i dont this its because that my english is not the best il try to explain i copied each command and paste it and one command didnt vant to be set others were blue after entering it asked for a value i copied comand press down arrow and then put value i think its cause that like idk i was just going to the trader to buy ammo after trader i did command
i think i entered something wrong because i use my arrows missclick or something
can you send a screenshot of your paths in MO2? they are here:
I got "installing mod pack specific modifications" also it says, installer can hang but it continues working
Is it ready or nah?
It usually says "Done" when it's ready. You can close it and start again if you think it has hung; it won't redownload things it already downloaded and will just continue where it left off.
my game is extremely laggy even though it was fine last night
i think snd_targets 256 was what i entered wrong idk if there is a command linked to it that affects gameplay
i genuinely don't know console commands so i don't think i can really help there...
are you in rostok? 
i cameup with a solution myb i should start now game and see if its same happening then reinstal if it is. Sorry for waisting your time
Does anyone know how to fix the fisheye camera in game? i dont know how it got activated but its rather jarring
is your fov super high or something? check in visual settings
120
yes that is super high
dropped to 75 and thats waaay btter
myb check ui fov for me it cause that
Trying to get Gamma set up and am running into problems once I have the Grok's Automated Modular Modpack software open for the first time. No problems with step one of "Allow PowerShell Scripts" but nothing happens after I dismissed the ERROR message after I clicked "Launch MO2". I dont get the popup to select Browse on
Sorry, had to take a work call, someone got their wiener stuck on the crane again.
full install went, same kind of startup except that just before the black screen, smaller window quickly flashes on screen. Probs the game window but still it returns me to desktop as before.
Now it takes longer.
Lemme post the new logs
gamma RC3 -logs -log, if that helps
hey cant find the answer in faq but if i already have progress un anomoly and got to gamma will i have to start a new game?
yes
it's still just showing me that it opened to main menu... :/
GDFSKGBLRTGL
had a similar-ish thing, would advise reinstalling Anomaly at this point
!delete follow the bot link to keep your saved games
If you really need to delete everything because you're having problems: #╭📖faq message
gonna check if it is an anomaly issue
Anomaly only to be clear, not GAMMA
ok thanks
HMMM.
If I start anomaly, it is faster.
The loop we're speaking.
It even adds an icon to task bar but also just closes down immediatelly.
that does sound like an issue with your Anomaly game then
esp if it can't even get to main menu
yes.
I went to google-fu, I had this thing with anomaly last year.
Sometimes it does something when you're not touching the game itself at all. I think I can remember the thread.
Annoying thing, I usually fiddle with the same stuff and mods when I install it/other overhaul mod and it either works as intented or suddenly decides to [ BLANK ] overnight or after four months.
Could it be that MO2 does not open a window for selecting a folder with an anomaly? well, how to fix it
first make sure it's not stuck behind the installer... because the installer can't be minimized and is always on top
if the "Launch MO2" button doesn't seem to work, find and open the ModOrganizer.exe file directly from your GAMMA RC3 folder
its transparent and you can see discord behind it :p
the error message is small!
My reshade doesn't seem to work. I can't open it ingame and don't see it loading when I start the game. Do I have to enable something? Fresh install btw.
I just realised that anomalylauncher.exe does not even try to launch anomaly, it shows the splash screen of gamma.
Now I am properly confused.
Anolaunch does open anomaly launcher for plain anomaly.
click "play stalker anomaly"
[ GAMMA splashscreen ]
your gamma installation process will patch the base Anomaly exe files, one of the things it does is change the little splash screen to read GAMMA
.
fwiw, if you do the k98 fix, you should copy over the patched exes + ReShade files
if you do want completely vanilla anomaly again... just "reinstall" 1.5.2 patch over it. though honestly i'd suggest making a new "completely vanilla" Anomaly folder
I'm currently doing that, if that does not help Imma drag this whole fire into the dumpster and begin anew on another SSD. >X3
[imitates Boris from youtube ]
But all is not lost, my cheburekis.
I still have my vodka, sausage is nice and smoky. This is just the way of the STALKER, neccessary part of gameplay.
my game perma zooms when i use the mouse zooming and my health isnt showing
The sample at the SW anomaly in the swamps is missing. This is my 3rd play through, I am at the correct spot. Any way I can fix this?
that did it ty. I just copied over the exe before.
!hud for health
Can't see the HUD anymore?:
Press Numpad Enter.
Your HUD looks strange?:
1) Load a save before this bug happened.
2) Press Enter on the Numpad (if you don't have a Numpad, turn off HUD in your game settings).
3) Press H on your keyboard.
4) You should have no HUD now. Try transitioning to a different location. HUD will get re-activated and fixed.
for the FOV issue - go to Settings, change FOV, apply changes. it's annoying but it does stop it
tooourist delight!
Hmm.
Can't reapply the update, anomalyDX11AVX.exe is in use.
...the game aint running, nothing in task manager. Who is stuck on what now.
yo
...pc restart?
was wondering if it saying unable to download the add-on archive for every add-on after pressing full gamma installation was okay
welp, let it finish and see how many active mods are in MO2
How long does it usually take in general
yup, now it went.
in that specific example it looks like it succesfully found the moddb mirror so it looks okay... for now
It seems that the game engine somehow remains on background, running?
that would explain the lack of crash in the logs...
Yeah.
Weird that I cannot see it in anywhere.
very much depends on your PC and your internet connection. Some poor sucker in #1026866080347603065 has 12mb download rate and has been going for hours
it does not even eat up memory. Just hanging in there.
and depends on whether or not the moddb servers are melting down
how many gb is it
~20 for Anomaly, ~50 for GAMMA mods
fuck i guess i ain't playing it tn
Why is the game like this during Thunder Storms
Why does the lighting look like this is this normal? Seems too dark and grey liek the lighting isnt working properly
foggy day
Is it supposed to be this dark?
in the fog? yeah
that still doesn't look right at all even if it is foggy; my game never looks like that
on my screen it does...
!default if you absolutely want to be sure you can reset Reshade by following the Keybinds instructions
Modlist
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
first two are acceptable but the third ss is downright sus
I'm not sure if it even is a foggy day or the lighting isnt displaying correctly
you can also just change brightness... Settings > Visual > Basic brightness settings
!shader try deleting shader cache
To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
Thanks
Anomaly started up normally.
Now to fiddle with gamma install.
thats what it looks like for me on a foggy ahh day, unless this is unusual lol, i think it looks way better than that overly dark stuff
It's not a foggy day it just looks like it the sky is blue when i look up and everythign seems way too dark\
then i'd recommend you delete your shader cache
#╟🔰☢newbies-chat for gameplay questions
wrong channel lol
!shader instructions for deleting shader cache 👇
To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
!hud
Can't see the HUD anymore?:
Press Numpad Enter.
Your HUD looks strange?:
1) Load a save before this bug happened.
2) Press Enter on the Numpad (if you don't have a Numpad, turn off HUD in your game settings).
3) Press H on your keyboard.
4) You should have no HUD now. Try transitioning to a different location. HUD will get re-activated and fixed.
with mo2 im guessing you have to run stalker with that to run with mods correct?
probly a dumb question
i got it need to run it as admin
I think that fixed it but it still doesnt look right shouldn't there be more sunlight?
So for some reason, I'm able to start up the game find and all, but whenever I actually load in. It just straight up crashes without any message. Im able to make a character but unable to get to gameplay. Any advice?
!crash
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
Cheers friend
yeah we need your crash file to start to help. But also, send us a screenshot of your MO2 please
Gotcha, how should I approach granting the crash file? In the file now, but not terribly sure what I should be looking for. Also heres the screenshot
just drag and drop the crash file into discord
did 152 and now it crashes on launch instead of new game. If someone can figure this out awesome, if not I give up on this mess.
Hopefully this is it
!k98 progress is progress, on to the next fix lol
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
What sun ray settings do you usually use?
Worth a shot haha
Was that the right logs or did I upload the wrong thing?
!k98
right log, i just don't recognise the error sorry
oop you already got it my bad
yeah this is an "update your Anomaly to 1.5.2" log
Ya good, appreciate
the help. Most likely updated the mod wrong or something.
!152
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
Gotcha. Simple enough I reckon! Cheers
mine are like this but tune it to how you like it tbh
aight i'm clocking out for the night, gl w/ your various installs 🙏
when in doubt check pinned post in #1026866080347603065
i already failed to sleep whatsoever and have work in 25 minutes so i guess im staying here to give vague hints at solutions
It works. No to turn on all my other mods and fix my settings all over again 😛
thanks lads
thanks for the help!
Got a question about UNISG. How do I unlock them? I read that youre supposed to go back to sidorovich and he gives you a mission then something about a radio signal, but I do not get that option when talking to him. Then thats supposed to start Operation Afterglow.
Not sure where to put this since I'm not seeing a bug report channel. I've noticed that if I want an attachment from a trader I can simply drag it onto my weapon from their inventory and it will attach it, without charging me money. Free weapon attachments
Definitely not intentional
Only works if the attachment slot on the weapon is empty
you've got to wait a bit, but if you don't want to you can type in UNISG when making a new game, after typing it check the 'change faction' you can do it with SIN too but I forgot what was the code
my FDDE does not have any options , i cant use the animations why is that
!factions if you dont care to unlock them through gameplay
To unlock every faction from the beginning, you can type greh/renegades/isg/z when you start a new game in the character creation screen.
Since this sound strange, I literally mean "TYPE WITH YOUR KEYBOARD", you don't have an option where you can type in, like a console command.
For example, if you LITERALLY WRITE on your keyboard isg, and then you open the faction menu, you'll see the UNISG icon. Same goes for the rest.
They are disabled because they were bricking saves
shhh don't tell them... but also #old-feedback-suggestions for bug reports probably
because he didnt update probably
He is on an older version. The latest version does not have them enabled. If he updates his game they will disappear.
now I got a question of my own, I can't get inside Dead City from Limansk after finishing Parent of Fear for some reason it's just CTD's me, why? I don't think having a hostile relations with the Mercs blocks me from entering, I haven't tried going from Army Warehouse though
just to clarify the busy hands bug isn't guaranteed so you can risk it if you really need to see your hands zoop around for half a second every now and then but its not on the gamma devs if you get bricked
oh and I can't even fast travel there
imagine if mercs being hostile gave them the power of CTD any stalker like a thanos snap
lets get a crash log in here though
where do I find it again?
!crash
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
I don't know what to send so I'll just give the whole file
I'll try going through the Warehouse and see if it doesn't crash
ping me if you'd like to tell me what's wrong with it
getting this weird resolution issue, anyone have any idea how i could fix this?
Try hitting alt+enter when you get to the main menu, that should fullscreen you then you can change the settings to the right values hopefully
thats what i did and it went into that weird smaller screen
the Mercs is officially keeping me out of their base, I can't literally get inside Dead City
is there a way to re-spawn spleen the technician NPC, he's currently not offering the "Give tool kit quests" to level him up in the zaton ship.
fixed it i had to go into the original anomaly launcher and change the graphics settings to the correct resolution lol
oh he's already have all of the toolkits iirc
I have an RD-9x39 with a canted sight, main optic, and a grenade launcher and if I switch to the grenade launcher the variable zoom on the main sight is fully disabled until I reload a save. Any known fix?
the technician in Zaton has all of the toolkits if I was right, its probably sort of a canon thing going on because Major Deggy came by and all that, you know it
he offered the quest before hand i just declined it....i just wasn't at the time going to make the boat into my main hub till recently, he's also still supply level 1
i thought nimble was the techy in the skadovsk?
nah nimble's a secret trader, or supposed to, I haven't meet him in GAMMA
- he doesn't have the tools
he's literally just sat in his room in the ship 🤷
hmm weird, it wasn't like this in Anomaly, try to wait it out
I know, but most people doesn't know he's actually selling things, until they interact
fucking hell mates, I can't get inside Dead City tf do I do?
can you also not disguise yourself and enter?
so I tried this, but it didn't work. It seems like the Sun just comes out full blast
really weird
I've done that
my save file is fucked I guess
hm, do they always just shoot at you?
so the only clues i can find about your crash log @analog bison is that [error][ 8] : Not enough memory resources are available to process this command apparently could mean that a mod is corrupted and you should full install again
!8ball
:8ball: | Concentrate and ask again, Devi
Yes.
alright thanks
how do i keep the hud activated but deactivate this horrible thing:
MCM > Mags Redux > Disable the HUD
I have an RD-9x39 with a canted sight, main optic, and a grenade launcher and if I switch to the grenade launcher the variable zoom on the main sight is fully disabled until I reload a save. Any known fix?
Rip 😦
thank you
This might be related to an addon though
137- Auto-Zoomed Out Scope Draw - Demonized
quit game, disable that addon, and try it out
Okay will do, thank you
In the FDDA, i have animations enable, but the hand,backpack and skinning checkbox arent showing up?
is there a way to fix that
I just finished installing GAMMA and was able to boot up the game, created my character and loaded into Rookie Village and everything is black. Every texture is black except the sky and the PDA
Yes in the latest update they were disabled because they caused the busy hands bug which bricks saves
!blackscreen
Follow this: #╭📖faq message
Disabling this did not help, thanks for the assist though. Going to just not used the grenade launcher slot
is there a way to enable them or will we have to wait for another update?
I would advise against it but i'm sure there is a way; i'm not aware of it, but i'm sure if you search the discord someone has done it
the moving trees look somewhat bad in some cases, is there a way to disable them? i cant find the addon that adds that
Any fix for a gun crashing your game when fired?
That people have off the top of their heads
in my experience this just happens every now and then, im about 200 hours in on this mod pack and it has happened maybe 10 times i just deal with it
ill just keep it the way it is then, anyways i appreciate the help and explanation
Well its one specific gun that crashes every time it's fired. You are saying just ditch the gun and move on?
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
Yes if it was one crash I wouldn't come here obviously
make sure you crash the game before getting the log, otherwise we just have a log of the game working normally :p
Hey guys quick question- sometimes when I boot the game and shoot for the first time, the game crashes as soon as I pull the trigger
Is there an obvious fix for this?
Well now it works perfectly lmao. Been crashing me out for 30 min now. I'll drop something here if the misbehavior continues tonight
!crash please mate, i can't make guarantees but its a start
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
Game freeze after receiving quest rewards. Different zones/npc/quest types. Monolith char.
What is "switch scope" keybind supposed to do exactly? Doesn't do anything for me.
if you have canted sights it does this my bad i had the wrong keybind, switch scopes changes the scope on your gun to the next one in your bag that works on your gun, or none at all, you need to hold shift and then press the keybind
my gun, pda, inventory have all dissapeared, my hud bind does nothing, any ideas?
I keep getting this FATAL ERROR. I have no idea what it means or which log file it is referring too. Any help is appreciated. Thanks.
my game just closed itself without a error massage after playing for about an hour or two what can this cause?
#🤖bot-commands message
RIP
!crash
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
- Detected CPU: Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz [GenuineIntel], F6/M5/S5, 2905.00 mhz, 17-clk 'rdtsc'
- CPU features: RDTSC, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, HTT
- CPU cores/threads: 8/16
Found commandline file!
Initializing File System...
using fs-ltx ../fsgame.ltx
File System Ready...
FS: 72937 files cached 97 archives, 16952Kb memory used.
Init FileSystem 15.199983 sec
stack trace:
[error][ 259] : No more data is available.
at address 0x000000741000B848
!529
!259
Delete the log file in Anomaly/appdata/logs/name_log.txt and Anomaly/appdata/logs/name_log.bkp
i think that is the log idk tho
i didnt disable any animation or mods, it was mid game in radar, now its persistent on all my saves
having issue with my save the game closes/crashes after the loading bar finishes
I CANT FUCKING BELIEVE THAT. THANKS!! GAME LAUNCHED RIGHT UP!
did you try to fast travel somewhere and it failed and put you in the same location you were already in?
no i just died and respawned at a campfire in radar and now i cant see anything sadge
did i do it right?
after loading like eight times its all back, no idea what happened
🤷 count your blessings; the zone giveth and the zone taketh away
Just wondering if this means anything to anyone here
FATAL ERROR
[error]Expression : D3DX11CreateTextureFromMemory ( HW.pDevice,S->pointer(),S->length(), &LoadInfo, 0, &pTexture2D, 0 )
[error]Function : CRender::texture_load
[error]File : ..\xrRenderDX10\dx10Texture.cpp
[error]Line : 535
[error]Description : The GPU device instance has been suspended. Use GetDeviceRemovedReason to determine the appropriate action.
[error]Arguments : c:/anomaly/bin/..\gamedata\textures\crete\crete_beton_pod_03_bump.dds
i've seen this crash before and im struggling to remember where; i just remember i made a joke about big hard wood when i saw it...
why tho haha my computer should be good enough for it to run smoothly no? 😄
This doesn't work for me at all, unlike switch silencer keybind which works just fine. Tried with a couple different rifles.
yes. Verify that your antirvirus doesn't block MO2
because it has this line in it ! Invalid ogg-comment version, file: e:/anomaly/bin/..\gamedata\sounds\material\wood\wood_big_hard_1.ogg
thats incidental though
also make sure anomaly and gamma are at the root of your drives
(not in Downloads, Desktop, Program files etc #old-how-to-install )
oof haha
yes they are
!modlist maybe
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
i play totaly vanilla with 336 mods
and your antivirus ?
any reasons of why the materials details not showing up on examine?, for stuff that is known to give components
Is there a way to manually change "switch scope" keybind? The default doesn't work for me for some reason.
the one in the game settings? its unused
how do i get the infinity bolts
you can use the under barrel GL keybind to switch between scopes on a gun
a gameplay setting
i know but i dont know where it is
settings, gameplay, progression, scroll to bottom
What am I missing
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
i love u 😻
just got the windows firewall
Thx
According to keybinds-in-gamma, there's a "switch scope" keybind on 6 that doesn't work. Is there a way to edit this anywhere?
Happened when I clicked start after setting up character and inventory. Any fix?
are you reading what i am telling you?
oh right... in the MCM keybinds menu it says that keybind is numpad +
switch scope is unused. it doesnt work
v switches between scopes on a gun
im doing it in game right now though?
and there is a keybind in the mcm to equip/unequip/switch to the next scope in the inventory
What's mcm?
My game just closes itself on loading my save but was fine few days ago, any known issue?
i have been awake 27 hours now though
!crash
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
Assigning a keybind to switch/toggle scope in the MCM worked. Thank you very much!
I'm having issues in the Afterglow questline. Right after the Quest Sharpshooter, I manage to find Stitch and finish escorting him to the landromat, but when I try to find Rogue at the Kindergarden he is never there, even though the quest begins. I checked with debug map to see if he is somewhere on the map but to my knowledge he isn't. Should I try to spawn him in with the debug? Looked though the NPC spawn list but I couldn't find his spawn section.
is now a happier AN-94 user
!152
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
AN-94 needs more love! i wish you could get some kits for it 😦
hey guys, my game keeps crashing suddenly 😦 Any idea what's going on?
!modlist if you wouldn't mind, i think you may be missing mod 94
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
how do u disable camfire save
!yacs
How to disable YACS safely: #╭📖faq message
nvm 94 is in there; was hoping for an easy fix dammit
No, I just Play in borderless 😭
found a post of someone with a very similar crash, fatal error at line 535 etc etc, he fixed it by lowering his graphics settings? he wasn't specific
#🔨base-gamma-support message (follow the reply chain, i can't really tell what he did)
y is my game perma zoomed and broken sensitivity when i use the zoom in feature
only suggestion i have at this point is try a full install... someone with bigger brain might have a better solution
Where can I find the [*.ini_log] ?
!k98 don't; just do the instructions below for that error
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
thanks anyway, I appreciate it
!hud
Can't see the HUD anymore?:
Press Numpad Enter.
Your HUD looks strange?:
1) Load a save before this bug happened.
2) Press Enter on the Numpad (if you don't have a Numpad, turn off HUD in your game settings).
3) Press H on your keyboard.
4) You should have no HUD now. Try transitioning to a different location. HUD will get re-activated and fixed.
You stole my kill aaaaa
im tryna get some COLOUR in here
this was a while ago huh; okay can you do the same for the window that comes up after you click this
That file is empty for me. under GAMMA - modpack_patches
ye
delete ModOrganizer.ini in the gamma folder
and launch MO2 again
after i click edit what should i do?
tbh do what madirex said
i was just gonna see if your paths were correct for the .exe since it might still be pointing to your old onedrive install but what madirex said should reset all that anyway
what do i need to do to get the files that are meant to be in the "modpack_patches" folder under GAMMA
point it to the anomaly folder like it says to in #old-how-to-install
like a teacher on an inset day, im trying to learn that now so i can tell you once i know and pretend i knew all along 
lol all good, apparently im flagged as a bot on the download site idk how when i have not done anything since i got home lol
Hello, I can adjust dropped weapon conditions but not for the armor. Someone said they are script locked but cannot find any topic related to that. Can you direct me to any source or advise me on how can I change dropped armor conditions?
Oh you can't files there?
they're there by default
his is empty though
Yeah I smell corrupt archive
if you've used them once without copying them then it's a you-problem
they are not. not for me for some reason
extracted with what app?
Download GAMMA RC3 again
7zip
Extract to same location, replace when prompted
okay
#🔨поддержка-стандарт-gamma-ru-ua message
funny how I kept the modpack_patches folder in here just for people like you
Thx madi! May wanna add this to the ref sheet
man if only these mirrors were a little faster.. im redownloading the files because i forgot which archive they were in and now ya'll got it anyway
i appreciate that.
Thank you so much Devi omg
it still gives me the same error
Okay wait up

it comes with the gamma client
Delete ModOrganizer.ini in GAMMA folder, base folder
After that open your MO2 again, and lead it to your Anomaly
ONLY AFTER YOU HAVE LAUNCHED IT ONCE
i have, ive followed step by step
i'v changed some graphical setting and now water starts glitching very hard
!shader
To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
which is why im confused on why i keep getting the same error
!default
Modlist
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
don't say "i've done it already"
And now?
if you're being told to do something then do it
close mo2
and delete modorganizer ini
and open mo2
Yeah we had really bad experiences with that before, some people outright lie to us
So sorry if we're uptight about that
i'v just did that. nothing works
is the companions disappearing after fast travel a known bug? and can i fix it somehow
Then revert to default user.ltx, follow the latter guide
i wouldnt lie about it, i do understand that there are people like that but ive been trying this whole time
idk what it is 
can you post the error again just to make sure we are all on the same page? because all i remember is your game wont launch and your MO2 showed it was installed on onedrive
Try it again, really, it's like restarting your computer it magically fixes stuff
Thanks, seems to have done the job after lowering the settings enough
Excuse moi- ONEDRIVE???
yeah...
Well, the files fixed something cause the game loaded and I started from my save then crashed with this error. Lol
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, and any that need to be updated will be updated.
To Perform this follow these steps:
- Open your
G.A.M.M.A. installeras admin - Click "
Download G.A.M.M.A. data" - Click "
Full G.A.M.M.A. installation"
some shots in the dark hit the target hey, enjoy the game!
alright
Not on my PC so can't tell you what
ye the first time it was on one drive then i changed it but i just get the same thing
Tf your game's running man
im getting a shit load of errors when doing the full gamma install now.
i checked task manager
restart your PC? someone had this a few hours ago actually it was still running even though TM couldnt see it
#🔨base-gamma-support message
this fella
That's because you didn't run as admin, spouting errors is its specialty
ight ill try
Hello, I can adjust dropped weapon conditions but not for the armor. Someone said they are script locked but cannot find any topic related to that. Can you direct me to any source or advise me on how can I change dropped armor conditions?
no i did i think i know what it is. ill let ya know.
Search there mayhaps x3
And what is it then, so we're on the same wavelength
got a wierd one game ran fine then i fast traveled and its chopy as hell now
After what
still same error
Will check there, thx!
good to know btw dnt fast travel to a hub lol
but its still stuering in g.swamps after i moved on
i did also just notice your mod count; can you reset it to default otherwise it could be literally anything going on in there
Okay man look, A-Life continues to be activated even after you go. Near NPC hubs even if you're away, offline still works if even to a little less degree. And when you fast travel, you advance time prompting the AI to do a bunch of tasks and that all takes, guess what, computing power. Currently a vanilla issue and I can't seem to fix it, it's driving me INSANE as well
!default
Modlist
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
how do i reset it?
restet ect work ?
Nope
so my game fd!!
You sorta have to deal with it for a bit
@hardy oxide DM
Hehe another one
oh so it will even out
And well, it won't hurt restarting the game
Yup
he just wasn't checking his dms
This restarts a-life, maybe fixing it
kool and ye i imagine its a impossible fix
Naw I mean another one joins x3
now im grape flavour
tec maybe open it ?
No option with a tech, nor can I open it
To who? Tech nor trader will take it
Hey guys can someone help me with money. For example random gun base cost is 30k but it will sell for 5k can i change it somehow for all items to be base cost?
When i sell it*
#🔨modded-gamma-support probably your best bet on that one; vanilla gamma has gun economy disabled
Unless you have a kitted gun that's fully repaired, from what I've found anyway
recently started experiencing the same, my microphone vanished entirely from my windows.
how to disable "can't save while in combat" near campfire?
It works wrong
Does the upgrade kit for the Walther P99 not work? trying to click and drag onto it but it's not doing it, upgrading the K98k worked though
the Walther P99 doesn't have any upgrade kits; right click > details
nvm i was wrong there are TWO Walther P99's who knew
one of them does have a kit the other does not
one on the right can take the kit, the one on the left can't
What squad is responsible for the quest Living Legend: First Strike? Is there anything I can do in debug mode to try and spawn them, I am auto failing the quest because the squad was killed
bruh
bit annoying but oh well
Couldn't figure it out after days of trying. Other packs such as EFP work flawless. I've got a blue yeti mic. Apparently it is known to have rare unfixable issues with specific games. I honestly feel it's one of the mods. Ended up switching to something cheap and nasty lol - but it works.
I got an XLR mic and this wasn't an issue before today, but for some reason all of a sudden its been happening. It's really odd. Thanks for letting me know btw!
@brisk zinc Hey, could you update the link for the !scar bot command? The link included in that command only leads to a whole different guide (what armor can be exchanged at faction's merchant)
@astral condor so I believe my issue is that for some reason when I extracted the gamma addons zip into the downloads folder it did not complete the task as it should have (likely user input error on my part). and now that I've done that the "the full gamma download" will not work properly since I'm flagged as a bot right now. will have to try to do the full install later on and see if it works. otherwise I will likely just have to do a clean wipe and start from the beginning with anomaly.
Naw naw no need, follow this
!move
KEEP IN MIND AND REMEMBER THAT USING THE FOLLOWING FOLDERS ARE NOT SUITABLE FOR ANOMALY AND GAMMA, DON'T USE THEM.
Desktop, Downloads, Documents, One Drive, Program Files/Program Files x86
DON'T. USE. THEM.
DON'T.
Moving G.A.M.M.A.:
- Open your GAMMA folder and ONLY delete the "
mods" folder you'll find inside. Leave the rest untouched, you don't need to delete anything else - Move your GAMMA folder to the new location
- Run the installer as admin, click on
Download G.A.M.M.A. dataand then onFull G.A.M.M.A. installation.
Moving Anomaly:
- Move the folder to the new location
- Open MO2
- Click on the
green and blue gearsicon to manually edit the new .exe paths of your Anomaly folder
condlist_1 = {+lost_stalker_strelok_dead} fail, {+stalker_stitch_dead} fail, {+stalker_rogue_dead} fail
these are the fail conditions for the quest;
lost_stalker_strelok_squad
stalker_stitch_squad
stalker_rogue_squad
are the names individually
not sure what you can do with that information though
unless by "was killed" you mean they are dead before you start First Strike, then i think i do know what you could do
MO2 shows only 70 mods, all files downloaded and installed as per instructions, folders correct, in GAMMA mods folder some mods only contain a meta.ini file. I believe it might have something to do with the powershell installation, any thoughts?
anyone know why im getting this error?
KEEP IN MIND AND REMEMBER THAT USING THE FOLLOWING FOLDERS ARE NOT SUITABLE FOR ANOMALY AND GAMMA, DON'T USE THEM.
Desktop, Downloads, Documents, One Drive, Program Files/Program Files x86
DON'T. USE. THEM.
DON'T.
Moving G.A.M.M.A.:
- Open your GAMMA folder and ONLY delete the "
mods" folder you'll find inside. Leave the rest untouched, you don't need to delete anything else - Move your GAMMA folder to the new location
- Run the installer as admin, click on
Download G.A.M.M.A. dataand then onFull G.A.M.M.A. installation.
Moving Anomaly:
- Move the folder to the new location
- Open MO2
- Click on the
green and blue gearsicon to manually edit the new .exe paths of your Anomaly folder
oh just read that as i posted haha nvm
could a mod add this to the faq
WTF i just had screaming in my ears from the game for going in the time thing in a psi storm
@astral condor Alright, ive done everything and now am at the part of editing the path to the new .exe. dumb question, which am i suppose to be editing? "binary" "start in" ?
wrong channel?
Delete ModOrganizer.ini
and open MO2 again
kinda sounds like a sound bug
Changed, I thought your guide contained Scar but apparently he isn't in it
Jupiter and Zaton are blank as well
Why do some mods only contain one .ini file and nothing else, is that normal?
has anyone ever noticed how sun shadow quality higher than low just breaks the shadows completely? tries to make it look diffused but i really thought my eyes are dying, it physically hurts me to look at the shadows
here is a link to a comparison https://imgsli.com/MTMxNTI3
maybe there is a fix ? i went through all sun shadow quality settings, this is a comparison between low and ultra, even extreme looks like that tho...
here is another img comparison https://imgsli.com/MTMxNTMy
anything other than low just triples the shadows and slightly blurs them, its horrible xd
alright, done. now it shows only having 202 mods active. i need to run the full gamma install again?
Yup
Hi, I've rebound the Home key, but want to disable ReShade shaders now, how to get the reshade menu?
Is it possible to have it so that our inventory itself is available when we open it without the backpack animation, and only if we select something from the backpack, do we get the backpack animation? And instead of your player getting up every time he does one thing, he stays down until you actually exit the inventory voluntarily? No reason he couldn't just pull out water from an unzipped, open backpack, drink it, put the canteen back and then pull out medicine not attached to a hotkey.
alrighty then, i will wait for the site to show im not a bot before doing so. this might be my damn issue lol
it works lets gooo thanks for the help
Anytime my dude <3
where is my stash at the clear sky base :( i cant find it
these animations should be disabled anyway? when was the last time you updated, almost all FDDA animations are nuked because they cause the busy hands bug
Not really a technical question
I'll make a command for these two later
I've had XLR before. Great mics. Yeah, it really is very baffling. I couldn't find anything anywhere to help me figure it out. If you discover anything please let me know 👍
I definitely will 
guy i recently had my first Psy sucker encounter, fortunatly survived but I have the smallest sliver of psy left. So my dude is always stoping, out of breath. i tried resting by campfires, listening to music, taking drugs, but the psy wont go up. what do i do?
I fixed the issue by changing VPN and disabling firewall. Now i have all 336 mods showing...however the game crashes on startup while before it would load into the game and crash at the start of a new game.
Hi, I've rebound the Home key, but want to disable ReShade shaders now, how to get the reshade menu?
@tawdry estuary if you're still struggling with this one, this is a potential solution, it's hard to test without a save where your issue is occuring.
Spawn whichever is dead (idk the smart terrain for the laundromat so just go there and spawn at cursor): stalker_rogue_squad lost_stalker_strelok_squad stalker_stitch_squad
Once spawned press F7 and go to NPC Logic / Execute
Paste this in function executer
db.actor:disable_info_portion("stalker_rogue_dead")
(replace stalker_rogue with stalker_stitch or lost_stalker_strelok as necessary depending on who is dead)
Execute
Then try to take the First Strike mission again
For some reason I dont get my companions on my right side hud, how do i get it back?
this a missing npc?
press numpad enter?
the Living Legend: First Strike mission is failing because one of the required stalkers is dead. I don't know if its dead before he takes it or dying during though 🤷 not heard back from Bongo yet
home key should still work unless you've changed the binding in the reshade menu itself
!npc
also hiiii heehee welcome to the team ;)!!
they aren't in that list i already checked 😭 had to find them the old fashioned way
ugh yea haha just realized how north he is
Thank you so much! I thought my hud was working but numpad enter hides other stuff an i was severly tired, this explaines everything, thank you!
hmm ill get the living legend stalkers added
they're a minefield, there are several versions of them depending where you are in the story from what i can tell with different logic and behaviour too
None of these guys are dead, but the Monolith squad I guess I'm supposed to be killing is dead
So I'm having an issue, I turned off Body Health System and Minimalist HUD, but the icons seem to still be placed as if I was using the Body Health System mod, I'm not having issues with the icons appearing or anything of the sort, it's just their position now shows up on top of my Health bar and I don't know what's causing it
that is so much easier
one sec i can get that info for you
hi guys. i followed framerate optimization channel for (obviusly) better fps and night visions doesnt work rn. can i use beefs nvg mod without shaders or it's a no go
Hello guys, i there a way to get a cleaner UI not as stretched as the screenshot show ?
Beef's NVGs are shaders
lol its impossible then
is there a way to enable quick saves?...i know its scummy or whatever but its more for crash protection for me
!yacs
How to disable YACS safely: #╭📖faq message
thx for help
thx
. . . oh god yea ur right... yea im not adding 6 versions of him, that'll just cause more issues honestly with mixing them up cuz it crashes if u spawn the wrong one when the other ones arnt "missing"
Hello,
I have a problem my character is in pain all the time and my life is sinking little by little, the screen is always red and then it goes away, again and again. If I let the doc fix me, it's still there. in addition, my teammates are no longer displayed on the right. I no longer see a food symbol or a drink symbol in the lower left corner
Hey, It is normal after Full installation?
Unexpected end of archive
ERROR: Data Error : STORYLINES_DLTX\gamedata\meshes\dynamics\artefacts\af_peas.ogf```
Yeah ignore it
give this a go, make a backup save first though mind, as mentioned i can't test this because i don't have an appropriate save
Hit F7 in game, choose Object Spawner
Check Spawn at smart terrain
Fill out these settings:
Spawn by section: monolith_eidolon_recon_squad
Select level: pripyat/
Select smart: pri_sim_5/
Click "Spawn".
Same again, Hit F7 in game, choose Object Spawner
Check Spawn at smart terrain
Fill out these settings:
Spawn by section: monolith_eidolon_squad
Select level: I11_pripyat/
Select smart: pri_monolith/
Click "Spawn".
Try applying the patch for your aspect ratio
fixed it with !k98, game appears to work now
ik ur crash log without even seeing it 😉 head_damage_17
Game crashes when I headshot someone
FATAL ERROR
[error]Expression : SG
[error]Function : CRender::model_CreateParticles
[error]File : r4.cpp
[error]Line : 683
[error]Description : Particle effect or group doesn't exist
[error]Arguments : hit_fx\effects\hit_blood_drops_hd_dust_18_extra
Help plsssss. is this frozen? It has been like this for almost an hour. the app isn't using any CPU or Disk. can't interact.
Something went wrong I guess:
I need help with the mo2, i have 350+ mods active and my game keeps crashing randomly 10-15 mins playing (i was messing with the mods and disabled some and now when i got them all enabled i have 350+ mods active, shouldnt i have like 337?)
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
uhhhh any idea ?
reinstall this mod
if the launcher has frozen, close it with task manager and start again, it will continue from where it left off after checking what has already been downloaded
lov u thanks
Anyone?
un aim and re aim a few times, it can glitch when putting on the scope first time
not working, but thanks.. :/
its the defult scope i didnt attach one, it also was working just a min ago
!default
Modlist
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
yea they can glitch out occasionally. u can try vid_refresh in console
Is sneaking somewhere, saving, getting into combat, dying/crashing, loading the save, then all the enemies are loaded in fully alerted, normal?
didnt work :/
I didn't ever see the reshade menu, is there an alternative command or executable?
anyone ?
save & reload when in doubt
first of all, press numpad enter, then secondly realise you are probably dying of all those things that were hidden until you pressed numpad enter
numpad enter
yup worked, thanks a lot
heehee didnt notice the missing hud part, saw red and went bleed ;p
Unfortunately even after spawning in both squads like this, when talking with Strelok I still get the Mission Accepted, Mission failed notification
Are these the only mission parameters?
I have the same issue (framedrops at Campfire) . Is there any solution ?
and stitch and rogue are definitely both still alive?
try deleting the shader cache and reboot, that seemed to fix it
you could potentially give yourself the task with commands
what should I do when npc don't shoot(tried defaults stealth but didn't work)
try doing the db.actor:disable_info_portion("stalker_rogue_dead") part of what i wrote earlier but do it for each of the characters, the game might mistakenly think one of them is dead for some reason
I haven't the time to work on those maps, I'm not that far north yet 😛 . Haven't played GAMMA in a month too. I just opened GAMMA now to check the NPC in Zaton, so far, the mercs stationed in the water processing plans are unkillable (there are only 2). And Scar only spawns as part of Clear Sky quest so I can't test out the spawn guide yet.
oo idea, accept the quest so it fails like it has been, then immedietly close the game and link us the log
should say as to why its failing
Good evening lads, i have a small issue with my game right now, every time i use a scoped gun like the sv98 or dragunov, my mouse sensitivity changes and it makes these guns unusable, i have to change it back and reload the save but it happens 100% when i scope in
@astral condor well, its installing without all the errors now. hopefully its the fix, i appreciate the help. will let ya'll know once its done.
I suppose it doesn't hurt to try
I'll try console commands after this I guess I just really can't think of why it would do this
@brisk zinc yea i got most of the southern npcs added (medics are bastards that need to be spawned at cursor for some reasons lol) but havn't gotten to the northern ones. I'll try and get jupiter and zaton's main npcs added. as for story ones like scar and living legend, yea they have tons of spawns for their different quest moments and behaviors
aaand y'all were talking about !scar not !npc... heehee 😅
I'll trying adding the loner Guide at the bar too. Killed him by accident after one of the jobs to assassinate a Dutier there on my way out of the base. I guess he's one of those special NPCs that must be spawn BY CURSOR, since my method didn'd work
...
Hi, where can i find the cfg file so i'm able to change resolution in it ?
anomaly/appdata and the user.itx file inside it
thanks a lot
yea sorry forgot the guides lmfao, if he doesnt work first time try it again after spawning him with smart terrain. Ik its wierd but for some reasons that seems to be how to get the freedom medic to work XD spawn at smart, delete, and spawn at cursor if spawning at cursor first time doesnt work
installed GAMMA but when i launch it opens default anomaly
I can't see it failing but thats probably because i don't know what im looking for @opal shoal any idea? the task is lttz_ll_eidolon_start and you can see where he starts it if you search for that
i need to afk for a bit
launching it through mo2 ?
I always crash in the recapture the bridge mission for duty
And I also have very low FPS on that same mission
is that mission from the duty expansion ?
nope
this my MO2
you didnt even bother reading the instructions at all? or even watch the video ? #old-how-to-install
Hmm idk, but Anna is the one who gives it to you
i did all
its the duty expansion addon, and its optional. #🔨modded-gamma-support
Okk thx
@tawdry estuary so it looks like the monolith squad that its trying to spawn already exists, so it fails to spawn and therefore fails the quest... now as to why that squad already exists...
Hi all, I entered Wild Territory for the first time today and now my game is completly bugging out (NVG & Flashlight not working, Inventory/HUD dissapearing etc.) and constantly crashing
what should i do to fix?
before this I did not have a single crash - I found a few ppl reporting crashes in WT - is this a known issue?
you clearly didnt follow the instructions correctly then, because there are many issues with that installation from what i can see already
hey, i got 335 mods and it wont download the last one after trying 2 times. i followed a link and made my modlist. where do i drop it?
drop ur log here
x.x thought you meant me for a sec
ye sure u too lol
you should restart the installation and this time please read the instructions #old-how-to-install
you need a completely new and clean anomaly without any mods installed on its folder
you dont need JSGME either. dont install that
No added mods, just activated/deactivated some from the list...
thx
@graceful iron do you happen to have a default modlist you could shoot me? my saved one is outa date lol (ik i can get it but lazy heehee)
just a sec. do you need the entire modlist or just enabled ?
just enabled, and thx!
!crashtravel try this
If you're crashing on "transition" or "fast travel" to a certain location or from a certain location: #╭📖faq message
@tawdry estuary this may actually work for you too, the deleting common squads & sleeping part ^^^
is my modlist doomed to fail D:
i think thats not ur active modlist, has over 400
thanks, will try
its 'all installed mods' as the directions said
ah yea send me the active ones so i can see whatcha missing
missing gamma core addon
the reliable one, not disabled seperator sorry screnshot confusing
better lol
ah... where do i get that o.o
try hitting only download gamma data, the button under the orange one in launcher
k bbs
@polar jewel Please dont dm Staff if you have a question ask it here
slippin into da DMs huh~
dont even get me started XD
I feel you lmao
Just turn off your DMS honestly
the beauty of settings indeed
XD
Jfc
That may be your issue lol
I had 10h on a save with 350+ mods but kept randomly crashing so i set the modlist to default and NOW I CAN'T LOAD MY SAVE
XD
@astral condoryooooo, thanks for the help!! im in game and running around now finally! STAFF is awesome!!
!default do the modlist part and dont touch the mods
Modlist
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
Hehe glad you got it working! Enjoy my dude <3
Start new save there's no saving it
Pun not intended
the save is gone, amazed it even worked for 10 hours before borkin
Is there a way to remove the cost for fast traveling?
probably because you also enabled mags redux.Just start a new save at this point
Bruh
Should have kept the modlist as it was
Only edit your modlist if you know wtf you're doing
Go in the MCM settings find a mod called better fasttravel(?) and set the tax multiplier to 0
does anyone know how to fix black screen when starting a game?
!blackscreen
Follow this: #╭📖faq message
just to humor you, drop ur active modlist here and if its not borked beyond belief ill try n help ur save
Hi, I dunno quite where to put this so I'll let you deal with it.
I'm on Win 7 Ultimate with Powershell 2.0. I tried running Groks Mod Installer which kept crashing. After trawling Google I eventually came upon the solution that Powershell 4.0 is required as a minimum.
Of course, Windows no longer supports Win 7 and so WMF 4.0 is no longer available for D/L from the Windows site.
HOWEVER, after hunting through Google I eventually found this link via the WayBack Machine:
It auto D/Ls a .docx as soon as the page is accessed, but then you need to click the D/L manually blue-script. It takes you to the D/L options for WMF 4.0.
I've D/Led and installed it and confirmed in the Powershell pop-up window that I do, indeed, now have Powershell 4.0 and that Groks Mod Installer now works.
I hope this helps other users . . .
Neal x
holy shit, got it to work. I tried my method and yours, didn't get him to stand still. Till I tried the spawn ID guid_bar_stlaker_navigator_SQUAD, then I stood right where he is usually stationed, then chose "spawn at player"
Too late for that, i enabled some other stuff that i think i had on my save and now loading the save and see if it works
eyyy nicee, yea some of the AI is almost creepily finicky in how they are added hahaha
!win7
If you don't have Windows 10, you need to install PowerShell 5: https://www.microsoft.com/en-us/download/details.aspx?id=54616
welp haha gl, if u were missing core addons nothing u do will matter
I guess the key here is not to "spawn at cursor", but rather, "spawn at player", you only have to stand where these npcs are supposed to be. Works the first time, no need to kill/delete then do it again
My mod list on my launcher has all been taken out of its categories, how can I revert this
nice nice, that may work for freedom medic as well if were lucky
!default
Modlist
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
click this to sort by priority and get back catagories
Cool, thanks. That was gonna be my next move, but thanks for the confirmation. I did try doing a straight jump from 2.0 to 5 but it stated 4.0 was an absolute necessity.
Lmao, i got the save working again with 350 mods
Now again the only problem is that it randomly crashes after playing for 10-15 mins, where do i log for crashes log and send it here so u can see whats wrong
My settings keep randomly getting changed. Specifically, volume, FOV, mouse sensitivity and other slider settings. Any idea what to do with that?
We dont provide support for custom modlists. Ask in #🔨modded-gamma-support
Thanks, that got it all back into categories!!
K
you'd put it in #🔨modded-gamma-support but imma be real with ya, if any core thngs are gone dont think theres gonna be much to stop the crashing. eventually it will corrupt and bork forever
guys where can I find quest id for the research guys sending me to X-19 lab (the quest just doesnt work for me)
If you need to find the documents you can spawn them from the debug menu. Just save before doing anything with it
Hey, I'm getting this error.
Expression : <no expression>
Function : CScriptEngine::lua_pcall_failed
File : ..\xrServerEntities\script_engine.cpp
Line : 204
Description : fatal error
Arguments : LUA error: ...1/bin/..\gamedata\scripts\aol_mp412_monkeypatches.script:98: attempt to call field 'callback_add' (a nil value)
stack trace:
Any ideas? Google didn't help.
nope doent work
Update anomaly to 152
!152
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
confirmed, just reloaded and tried again, it works the very first time. Any missing NPCs that can't be spawned using the 2 previous methods might be spawned by trying this third method. The keys of this third method are "_squad" at the end of their spawn ID & "spawn at player". I'll update the guide text file and ping Falco in. You can try adding more to the list with this new method.
My PC got water intrusion yesterday. I cleaned everything as best as I could, couldn't get the screen to show anything despite the PC running. Took it to the shop on the back of my scooter, with the clear side of the case facing the burning hot sky. By the time I got to the shop, everything just worked like nothing wrong ever happened lol. I guess God loves me enough.
I ve just spawened every quest document - collected them - the quest dopent update
Spawn the correct ones
What is the quest name
1 sec
lmao god speed on the pc, yea only freedom medic seemed to be a lil bastard but if it works for the others ones as well let falco know as it may be a more consistant means of spawning non smart terrain viable npcs
Im already inside and have been searching for like an hour and a half
im opening the game to see the name of the item just a sec
okay, i redownloaded the GAMMA Data
this is the item you need to spawn the one with the arrow
does updating gamma reset the extra mods u load like fix stutter, reduce stash weight etc? because they unticked themselves for me after i updated last night
that quest actually isnt in X-19, its here in a small tunnel
is it possible to play coop with friends through a mod ?
it returns everything to default
is that going to destroy my stash which is over the default 70kg limit?
!custom
If you want to keep your personal mod list between updates: #╭📖faq message
@brisk zinc @opal shoal Updated the list of how to spawn missing NPCs to include the guide on how to spawn Navigator (loner guide at Rosktok). Also included the guide for the 3rd method for those NPCs that can't be spawned using my method (spawn at smart terrain) & Irwhittaker's (spawn at cursor).
PS: the key for this 3rd method is adding "_squad" at the end of the NPCs spawn ID & SPAWN AT PLAYER (stand where they're supposed to be)
probably keep a backup of your modlist
but that wont include any of the new mods in the update tho, right?
Ooooooh God darn!!! Nobody told me that! Thanks a lot!!!
Honestly its a bad task description we could probably get that fixed
Keep getting this error
This is mostly to know what mods to reenable after the update
This problem is already known, the zip isn't a FULL ULTIMATE SOLUTION 9000, it's just a way to reduce clogs on Moddb.
The error is normal, don't worry about it, use the installer, you'll get the mods.
no the stash will just be over, unable to put stuff in but still working to take out
nothing get extracted when I close it
glad ya figured that out cuz x-19 just doesnt exist in the st_quest file lmao
Yeah I had no idea, it says lab x-19, so that's exactly where I went
Do a full install and get the mods that way if the zip doesnt work
imma put the #old-how-to-install read it gif on a hotkey i swear
Just installed Gamma. can't launch. Are mods overwriting each other?
!crash
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
dayum the timing was perfect on that heehee
That log emoji really got me
Is there a way to enable accesible zones mid playthru? some places are completely unaccessable
we choppin logs today heehee
I TAUGHT HIM IT
You will need to find pda with the transition locations in them
My copyright
🪵
where's the TM
I know, but its chance based, and it stops me completely from progressing
so is there a way to turn it on?
heehee he did, he did in deed. 🪵 TM
absolutely read that in the age of empires taunt voice
I dont think there is a way to disable it midgame
Rule of thumb: Never disable mods midgame
Sorry but which channel do I drags these files to?
here
!k98 do the steps below
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
That's perfect, thank you
How do i fix? Playing on dx8 with required mods removed
Far away stuff looking white?
Yes
gloss factor
It was foggy before i switched from dx11 to 8 due to forced bad resolution if that helps
#│🔧troubleshooting message should help
Is there any anomalies visual mods in the modpack that I can disable?
I'm already on Dx8 with all changes necessary, I only get down to 20 Fps when looking in the direction of certain anomalies.
Hello, everyone!
So yesterday I've played GAMMA without any issues whatsoever — no freezes, no crashes, no stuttering.
But today when I try to load literally any save -- the game just CTDs without an error.
Log file states two fatal errors at the end:
[error]Expression : D3DX11CreateTextureFromMemory ( HW.pDevice,S->pointer(),S->length(), &LoadInfo, 0, &pTexture2D, 0 )
[error]Function : CRender::texture_load
[error]File : ..\xrRenderDX10\dx10Texture.cpp
[error]Line : 535```
What I've already tried:
- moving contents of modpack_patches from GAMMA folder to Anomaly
- Updating GAMMA files (says they're up to date)
- Full installation of GAMMA
None of that helped. Any ideas how to fix this? And how to avoid it in the future?
Hello, I just follow the delete information and after reinstalling Anomaly and patching it with the 1.5.2 Archive, what should i do now ?
If a launch the game via the gamma shortcut (made after the full install | the MO) and select "Anomaly (DX11-AVX)" it launched the Anomaly game and nothing Gamma related
Did not work even with relog
ive got 3 of these broken PDAs from lost signal quests stuck in my inventory.
How can i remove them?
Hello everyone.
Upgrade kits that are needed for weapons and armors do not match with the ones i've found or crafted.
For example to upgrade AK74's recoil by 10%, I need: Weapon Mechanism Upgrade kit (basic)
but
Same one I can craft or found from stashes is called: Small Arms Tuning Package R-39 (basic)
What am I missing?
When I installed there were 336 mods active, i didn't had any probles playing the game, no problem when launching the game. How can I fix this? Is there a way to check if something is missing through mod manager so i can activate it? Or do I have to install from scratch which as I said, i didn't encounter any problem anyway when I installed first.
Please help me with the situation.
See the images for better understanding.
curious - you should not even get those.
Yes that's my point
3rd image is my stash, i've found at least 20 of them
but they are NOT matching with the ones i need
it's handled by a script, so it must've some issues changing/converting them
i have sometimes seen those in stashes but they despawn before i can click them
So what can I do then ?
i dont have an answer for you right now
i would run this internally and see what the guys say
do i really have to turn off windows defender when installing gamma
as an intermittent solution, you can use debug and replace the old ones
If you want it to not fuck up the installer, yea
As Windows Defender acts as a firewall as well
aw
i have done the full gamma installation but on mo2 i have like 197active mods and some mods disabled
Ok then i'll wait for now, i progressed so much that i dont want to do new installation which i dont think will fix this problem because there was no problem with my installation at the first place anyway
You can add an exception in WD, or just turn it off temporarily. Not that you need it, remember the best antivirus is common sense x3
pls help
!335
To get the #📍577-mods-in-mo2 please, follow this:
1- Visit this link and download GAMMA_addons_downloads.7z: https://gofile.io/d/WlndL7
THE MULTIPLE FILES ARE MIRRORS. YOU ONLY NEED ONE 8.2 GB FILE. JUST CHOOSE ONE. You don't need to get the 2.4 GB file, because you already downloaded it to get the client.
2- Open yourG.A.M.M.A. RC3folder, move the archive in there, right click it and choose "extract here", using 7zip. It will create a folder calleddownloads, which will be now filled with zip archives.
EXTRACTION ERRORS ARE NORMAL. WE ALREADY KNOW. DON'T WORRY.
3- Go inside this folder, which is inside yourG.A.M.M.A. RC3folder:.Grok's Modpack Installer, you'll find theG.A.M.M.A. installer.exe.
LAUNCH IT WITH ADMIN RIGHTS. Click on "Download GAMMA data", when it's done, click on "Full GAMMA installation".
The archives stored in downloads folder will be installed in your MO2 and you should reach the #📍577-mods-in-mo2.
How can i do that exactly? Is there a guide for it where I can check how to do that? And would this be appliable to crafting also because on my crafting screen i see the same ones
My loading times went from "hey its on HDD thats pretty quick" to "wow i want to kill myself" after doing brain scorcher, any ideas? I have GAMMA moded so i dont expect figure it out lmfao
!debug
How to enable debug mode: #╭📖faq message
Thank you
can anyone help..i found that my ambientLight.fx failed to compile
when i try to select UNISG to play, the game crashes. anyway i can fix it?
@astral condor
There was a problem with the Artifact Hunter quest line. The bottom line is that after completing the quest with Markov, the next quest with the search for Pirogov failed. As it turned out later, this happened due to the fact that he died in the Dark Valley at the hands of someone or something.
I was able to find its ID (name: ah_dark_pirogov | ah_dark_pirogov2018) and spawn it via the debugger. But this did not solve the problem:
-
I take Markov's quest to find him. He fails. Pirogov's spawn, I start to communicate with him, the quest line works. As soon as he gives me tasks, they immediately fail.
-
First I spawn Pirogov, and then I get a quest to find him - he still fails right away. And again, all received quests from Pirogov fail.
What to do?
Used the instructions for pre-completion of the task from the message #╭📖faq message, but did not help. All the same, the task fails to find Pirogov.
Perhaps this is due to the fact that when I spawned it, it is not marked in any way on the map and when you hover over it, information about it does not appear.
Discord is the easiest way to communicate over voice, video, and text. Chat, hang out, and stay close with your friends and communities.
can you send me your modlist, logs and savegame files?
Skom?
Of course, but from where can i get those
!modlist
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
!crash
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
and savegames are in appdata iirc
Got it, just a min
I was wondering if there is animations for healing?
all heal items have anims
Shiiit uh the save may be borked, I'd recommend checking our NPC guide up above by Marshall and Irwhittaker, but I'd recommend starting a new save and doing that quest again.
But other than that, I have not a granule of an idea- x3
Check pins
everytime i heal i don't see the animation is there a fix?
The problem is that Pirogov is dead. I resurrected him.
I have no idea my man sorry
Should I just type it here? It is a bit long
drop the file
should i just re-download the game?
So, I finally decided to re-install everything and I still got the black screen on launch. If I were to click on the game icon, the black screen appears for few seconds and then it minimize.
These are modlists and crashlogs
@versed tusk
These are the last 3 saves
Getting this crashlog. First I had a different crash (Something about wpn_protecta) that I tried to fix with the modpack_patches folder and now I'm getting this one instead. Any idea if what it could be or how to fix it?
I tried moving my game to another drive(following the steps like changing the directory in MO2 and deleting the mods folder, doing full install through the installer afterwards) but the game launches with the vanilla anomaly menu. Any way to fix it without a full re-install?
is there a way to disable loading zones so I can go pick up loot/use cover near them?
Ok game was even slower and then just memory_errors crashed it errytime. So i just load older save in the brain scorcher and it worked! lmfao, Save often dont just use quicksaves stalkers
i have 336 mods and couldn't start the game. i have some files that are red. Sorry first time running this gmae
can anyone confirm what glossfactor and glossfactor min values are supposed to be on the current build? im getting some odd shines.
btw, i found out you can right click combine if you have 3 of the same old upgrades, but they still wont convert automatically. you can check my workbench
Is there an alternate key/command/executable to bring up the reshade menu? My home button doesn't work.
Don't spawn his name, spawn him using his squad name
is this done
This problem is already known, the zip isn't a FULL ULTIMATE SOLUTION 9000, it's just a way to reduce clogs on Moddb.
The error is normal, don't worry about it, use the installer, you'll get the mods.
more or less, it will redwonlaod failed addons anyway
Will enabling halved stalker pop at hubs corrupt existing saves?
Hey Skom, do you have everything you need? Is everything i send in order?
Trees/Leaves flickering or something (Resolution: 2560x1440) (Antialiasing: 2x High)
Is the included ReShade using my previous keybind for the menu, or does the included one use its own .ini/keybind?
should be fine - taking a look rn. am at work so a tad busy with some stuff 
appreciate it
I tried with ah_dark_pirogov_squad.
At least a win is that he is displayed on the map, but still not considered an important character.
No worries at all, i'll be waiting, take care!
And it still doesn't appear on the bottom left (his info)
hay I have 395 active mods any idea where i messed up?
most of the important characters have been changed to "traders" to avoid them getting attacked. trader characters dont have the faction info
!scrambled follow these instructions
- Close MO2
- Go to
GAMMA/.Grok's Modpack Installer/GAMMA/modpack_data/ - Copy this file:
modlist.txt - Paste it in here and replace the existing file:
GAMMA/profiles/G.A.M.M.A. - Now launch MO2 again
If this doesn't work follow the pic below:
https://cdn.discordapp.com/attachments/948840290263896075/960997447285477476/unknown.png
But how to be? ID through which I will spawn it
I spawned him as a trader anyway
after adding antialising, restart the game
Updated today - strayr voigt pistol no longer has a shooting sound - only impact sound for bullet
now save reload
and talk to the other guy
the quest should initate correctly after finishing the previous quest
nothing changed related to guns sound
I did. All the same, he fails the task and all the following tasks received from Pirogov will also fail
i keep extracting gamma addons to the downloads folder
its not showing up after extracting
check out how you extract it
you can drag and drop the content to downloads folder otherwise
drag & drop
need some help, i keep getting a shader compilation failed error. already tried deleting shader_cache. i keep getting (12,7): error X3004: undeclared identifier 'SRGBToLinear'
i am and its not appearing
refreshed it and everything and retried
its weird because i just checked my rpk16 its having the same problem - the saiga isg is working normally
did you make sure you spawned him correctly ? there is a guide for spawning dead npcs in #╭📖faq #╭📖faq message
Hey I need some help here, I successfully ported in a custom weapon into my game but the WPO UI showing the status and all the parts and stuff won't show for it, and I can't find what file handles that
Hey guys how do i fix sound problems?, I currently have 0 sound in the game
Please someone help. I have an annoying stuttering especially near campfires do you have any tips/fixes? (RTX 2080 Ti no patato at all)
#╙🖇mods-making-discussion is probably better for that question
how space do you have on that hard drive
ok, only problem is I can't seem to post in there cause it keeps saying I don't have permission to
126gb
I'm pretty sure it's PBKAC
extracting an archive isn't something complicated
just extract it somewhere and move the downloads folder otherwise
alr
or otherwise make sure you have the correct archive size
Yes, I did as written. Nothing helped
my game ctds everytime i load into the garbage area
thank you I am the dumb
vanilla gamma modlist and parameters?
when did you start this save?
@willow hawk Yea vanilla gamma modlist apart from "Turn this on if you stutter" and i started it about 2 days ago i cant remember when exactly but it was loading into garbage fine before
GAMMAReShade.ini found in "STALKER - GAMMA.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\bin"
Are the keybindings in this ini used ingame?
bro the reshade key is HOME
It doesn't work for me
its disabled by default though. its the mags redux addon
did you update recently ?
how do i fix shader compilation error? can't play at all due to it and delete shader cache isn't helping (12,7): error X3004: undeclared identifier 'SRGBToLinear'
wtf its still empty i tried it on a different folder
I finished the install and the game is not launching. Here is the Logs from the MO with errors like "File is blocked"
i press close** when its finished
@willow hawk no i dont think so
are you running installer as admin?
Hi i have 336 mods and the game works but i had this error during the install is it a problem?
Yes I am
got it i extracted it to its own folder instead
what if you F7 > delete common squads
Anyone have the issue with mags redux when trying to reload the gun is just lowered off screen and raised back up without reloading? Only fix I know of is to exit to desk top and start the game back up.
Did you add the correct mags to the loadout? That was the only thing I noticed. And where is that mod located, I'm trying to turn it off.
What is the idea behind artifact durability?
Say, I have a Ring in that basic lead box. There is a bar underneath the lead box icon that has only like one or two yellow bips left.
I would say that when I put the AF in there, there was no bar.
Is it degrading or what?
ignore it
@willow hawk same thing happened, loaded into garbage and it just instantly ctd
Thank you!
dont ping gamma developers directly
At first , the game started stuttering way to often and then it crashed. Anyone to take a look?
also, no one here can help you if you dont post your crashlog
go #🤖bot-commands and then type !crash
Apologies for asking if it's been answered but which mod is it that adds the mags into the game? I don't have any of the mag redux on yet still getting mags for certain weapons.
Download data > full install just to be sure
Borderless solved but graphics was worst..too much aliasing. I use 1080p monitor and finally solved on full-screen with v sync on AND AT THE SAME TIME fps limiter at 60hz. Without limiter I had stutter at campfire even if the sync was on
With nvidia dsr on for a 2715x1527 resolution
stack trace:
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: ...y 1.5.2/bin/..\gamedata\scripts\grok_spawn_lights.script:59: attempt to index global 'placeable_furniture' (a nil value)
i had posted it maybe 10 mins before u replied
help please, im supposed to deliver a package to a person here, but in its place, its just a grave, no person here.
sounds like corrupt file
i wont be able to help you, i am not a Gamma Technician
what should I do then?
i am trying to do Mortal Sin: Red Forest Haunters and i don't see the bodies, anyone has any ideas?
bruh I can't give decoder to strider
that was not to you m8
thank you so much
