#HobbyWing F-7 flight controller withe the micro usb port

1 messages · Page 1 of 1 (latest)

simple harbor
#

Do you have the correct firmware flashed? What gyro does it have?

#

Post a !supportid and clear photos of both sides of the FC

weak finchBOT
#
Betaflight Support
Submit Support Data
  1. Open the CLI tab
  2. Click the "Submit Support Data" button
  • Optionally enter a brief description of the problem
  • Wait for it to finish
  1. Copy the resulting support ID

Check the image below for visual steps:

simple harbor
#

This ID is not valid, try again

simple harbor
#

How old is the FC and why do you have such an old Betaflight version flashed?

#

Did it come like this or did you flash Betaflight 4.2.11?

#

Why did you flash an older version?

#

You flashed an earlier version that does not support the gyro the FC uses, hence no gyro

#

Flash the latest Betaflight version

simple harbor
#
  1. Use https://app.betaflight.com/
  2. Flash version 2025.12.1
  3. Do not select manual baud rate
  4. Only select the options you are using
simple harbor
#

Did you flash it?

simple harbor
#

It doesn't look like you flashed it. You don't need an Arduino, just flash via USB

simple harbor
#

You still have not done what I asked you to do

simple harbor
#

I gave you very clear instructions here: #1467871411979813080 message

#

There are plenty, but why wouldn't you just use this one?

simple harbor
#

Just do what I told you to do days ago 🤷‍♂️

simple harbor
#

Not sure how this could be any more clear: #1467871411979813080 message

simple harbor
#

What did you try?

#

You showed version 4.4.0

#

Which is not what I told you to flash

simple harbor
#

All of the drivers are already include in the target

simple harbor
#

Have you done what it asked you to do yet?

gaunt dawn
#

Everything is good V-22

simple harbor
#

Not at all what I asked you to do, but 🤷‍♂️

gaunt dawn
#

Ok ok V-22 when I arm my quad it fired up the motors just fine and I setup my arm switch and Acr and horizon mode switch and just a beeper for now and when it’s armed and I give it throttle the spin normal but then the spin like they are spinning off into the wind and gone and only turn off has soon has I in arm my quad hahaha.

simple harbor
#

If you are testing with props off, that is normal

gaunt dawn
#

Roger

gaunt dawn
#

V-22 I believe a have to change my magnets to 12 instead of 14

#

And I have a better transmitter like the MK radio master and a spectrum one also and fly sky hahahaha 😉 and still a work in progress here and thx

gaunt dawn
#

It still a work in progress V-22 and I still thank you buddy

#

So my 2207 1750Kv motors have 12 magnets

gaunt dawn
#

V-22 r you still around and do you have any filtering wisdom hahaha

simple harbor
#

Use one of the Betaflight presets that most closely matches your build

gaunt dawn
#

Ok will Do thanks

gaunt dawn
#

V-22 here you go man

gaunt dawn