Flight stick inputs not showing up. | Betaflight | Page 1

limpid sedge Jul 26, 2024, 3:00 PM

#

A week after last flight updated all firmware goggles, vtx, controller, etc.
The betaflight reciever tab no longer showed inputs.
Gear:

radio = radiomaster zorro
receiver = betafpv superD 2.4GHz receiver
Esc = Mamba f55
FC = mamba f405 mk2
firmware (on FC) = betaflight 4.5.0
betaflight version = 10.10.0

The default reciever port for my FC is UART1, which is what it was connected to, resoldered all three wires just incase.
I've attached some photos/videos of the issue.
Thanks for reading, hope that a fix can be found 🙏

limpid sandal Jul 26, 2024, 4:28 PM

#

why SBUS?

#

your esc, is it BLheliS?

#

if it is, use uart 6 instead for your receiver, and set protocol to CRSF

#

(you might have to reflash your flight controller with CRSF protocol support)

limpid sedge Jul 27, 2024, 12:42 AM

#

Okay ill give that a try today, thank you

#

Esc is DSHOT

#Flight stick inputs not showing up.