GEPRC TAKER STACK | Betaflight | Page 1

dull helm Apr 12, 2024, 1:32 AM

#

hello all, i am planning to install the GEPRC TAKER stack below to an upcoming LR build. however the FC does. it seem to have a barometer feature and i am not too keen on installing this extra peripheral. would it be fine to utilize gps altitude for reference? i shall be using an M10 equipped HGLRC M100 module which can easily lock in excess of 10 sats from cold start.

https://geprc.com/product/geprc-taker-f405-bls-50a-stack/

velvet marten Apr 12, 2024, 2:48 PM

#

Why not use the baro? It's more accurate than the gps. Especially it you cover it with open cell foam

delicate mulch Apr 12, 2024, 8:13 PM

#

Check altitude_source or altitude_prefer_baro

dull helm Apr 12, 2024, 10:19 PM

#

oops correction on previous message! it DOES NOT SEEM to have a barometer!

the point is there seem to be no barometer feature in the geprc stack. please check the link i have included if it is indeed the case. its odd they release a decent stack without a functional barometer!

#

i would have preferred a barometer if it were available.

delicate mulch Apr 12, 2024, 10:31 PM

#

Solution from GEPRC: https://geprc.com/product/gep-m1025-series-gps-module/

dull helm Apr 12, 2024, 11:33 PM

#

oh this seems to be a logical solution having the gps module containing the barometer chip via SDA/SDA connection! definitely worth a try,

#

after a quick read, it seems the M1025 offers options for the magnetometer and barometer on this series of gps module.

#GEPRC TAKER STACK