azure pier
Hello, just finished a new build with the GEPRC AIO F722 v2 board and noticed the CPU load is at around 53% . Wondering why so high.
MCU F722 Clock=216MHz, Vref=3.27V, Core temp=33degC
Stack size: 2048, Stack address: 0x20010000
Configuration: CONFIGURED, size: 4034, max available: 16384
Devices detected: SPI:1, I2C:0
Gyros detected: gyro 1 locked dma
GYRO=ICM42688P, ACC=ICM42688P
OSD: MAX7456
System Uptime: 69 seconds, Current Time: 2023-10-14T14:52:18.204+00:00
CPU:51%, cycle time: 125, GYRO rate: 8000, RX rate: 15, System rate: 9
Voltage: 1 * 0.01V (0S battery - NOT PRESENT)
I2C Errors: 0
SD card: Not configured
Arming disable flags: RXLOSS CLI MSP RPMFILTER
Any ideas on this ?
