proud thistle
Support ID Id: "b7ad0153-5909-4ca7-ba14-7d772de80061" for support data on 4.3.1
I used the cutom defines for gyroBMI270 and DPS310 "ACCGYRO_BMI270 BARO_DPS310", but the BARO was not available on 4.4.2.
"CLI Status 4.3.2"
Building AutoComplete Cache ... Done!
status
MCU F411 Clock=108MHz (PLLP-HSI), Vref=3.31V, Core temp=44degC
Stack size: 2048, Stack address: 0x2001fff0
Configuration: CONFIGURED, size: 3994, max available: 16384
Devices detected: SPI:1, I2C:1
Gyros detected: gyro 1 locked dma
GYRO=BMI270, ACC=BMI270, BARO=DPS310
OSD: MAX7456
System Uptime: 190 seconds, Current Time: 2023-09-04T05:14:36.641+00:00
CPU:21%, cycle time: 308, GYRO rate: 3246, RX rate: 15, System rate: 9
Voltage: 4 * 0.01V (0S battery - NOT PRESENT)
I2C Errors: 0
SD card: Not configured
Arming disable flags: RXLOSS CLI MSP RPMFILTER
flat dawn