support-forum
GHF411 AIO Flight Controller not recognized by PC
4.4.1, FRSKY_X_V2, constant AXLOSS in ANGL mode, falls down
SOLVED
Speedybee F7 mini auto detect
OmnibusF3
firmware
No ledstrip after update
OSD not showing at all after flashing BF 4.41.
Motor direction tool does not work when Bidirectional DSHOT enabled
Foxeer BNF - 4.5.0 firmware not liking 10.9.0 configurator
Cinelog20 Remains in Low Powered State and No OSD when Armed
Arm with out GPS on switch
SPEEDYBEEF405V3 4.4.2 OSD Issue
Double Press to Arm/Disarm on DJI Controller?
Hey, i have an issue. When I press my bind button, nothing happens and i cant connect my cineape 25
Foxeer f722 v4, barometer on 4.4.1 version doesn't work
SOLVED
GEPRC CineLog20 and Commando 8 Binding issues
whoop help
issues with motor not spinning thought correctly resourced.
Having problems with getting my tbs tango 2 to connect
Problem flashing Betaflight F4
firmware
configurator
flashing
How do I move The Beta flight software from one old flight controller to a new flight controller?
drone is not doing anything, even though it is clearly recieving singals
Receiver tab > quad spinning when disconnected from xmtr.
Bind zorro RC and BNF Nazgul ELRS
ELRS connected, but no input in betaflight
Bricked T-Motor f722 mini FC Flight Controller
SOLVED
flashing
OSD issue : LQ 0:0 flashing
osd
flashing
Cetux X Firmware Flash
Can't get SpeedyBeeF7 to connect to betaflight via com3
firmware
configurator
upgrading from 3.5.0 to latest bf in latest bf configurator - error: Firmware image contains addr...
New to FPV - Clueless
i don‘t Knew What i do
Ruined new iH3
firmware
configurator
flashing
what radio protocol for S.port
Strange ESC Bevavior
First build, need help in betaflight
configurator
New to FPV
Tmotor f7 pro issues with x8
Failed Serial Port…On Mac
No gyro found for target MatekF405STD
Motors at full power at any throttle
Failed to connect to serial port
configurator
Quad is actually arming (motors spin) when plugged into USB with BetaFlight Configurator.
SOLVED
I have no idea at this point
Motors spin fine when connected to Betaflight, when disconnected they just click
firmware
configurator
flashing
blackbox
How to program a BetaFlight Flight Controller myself
I really need help with trying to figure this YAW twitching out.
esc problem
pre arm as safety switch rather than something I have to reset every time I arm?
throwing and arming into angle mode but it says runaway and stops
transmitter tab shows no stick movement
firmware
configurator