support-forum
Drone control using MSP
SOLVED
Issue with the craft and pilot names on the OSD(4.6.0)
osd
firmware
Moblite7 with a Frsky Taranis x7 controller trouble
firmware
configurator
flashing
falling out of sky
Random Power Loss
3,5 " Quad Micro Apex freaks out after full throttle
blackbox
filters
tuning
Needs some HELP!
Unable to get Betaflight OSD with O3
osd
configurator
DJI o3 with DJI integra problem video
osd
configurator
firmware
F4 1S 5A issue
Please Help
GPS WITH POSITION ERROR
Choosing between two barometers
SOLVED
configurator
Barometer and Custom Defines not working
SOLVED
firmware
flashing
Incorrect OSD in Goggles
in-flight calibration
LUA without VTX Settings
Gyro/PID Freq. and CPU Load
tuning
SERVO NOT RESPONDING
Rebooting in ROM BOOTLOADER - IMPOSSIBLE to find serial port
firmware
flashing
Drone "slips" when I do certain turns
"Failed to open serial port" - Pop-OS 22.04 LTS
SOLVED
Trouble with OSD display after Firmware update.
SOLVED
BMI-270
SOLVED
foxeer osd camera contol
I can't connect my CaddxFPV device to my computer via the USB Mini port.
Motor problem on take off Titan XL5 rebuilt with SpeedyBee F405 v4 + 55A ESCs stack
My stick no input in betaflight .
install VTX erls betafpv in Mobula 7 . dont work
rssi dbm and lq doesn’t work
SOLVED
Moonlight+VRX - no bf osd, no rec on takeoff, standby always on
MOTOR_PROTOCOL error after flashing to Bluejay
Shendrones Insider / Cinelifter / Big Cinewhoop unbearably wobbly
tuning issue hdzero 75mm
fc is brong ?
Reset CLI from GEPRC Website put ELRS Receiver Into Bootloader Mode.
Diff from 4.4.2 to 4.5.1 ?
GPS baud rate bottleneck
speedybee stack f405 V4 60A BLheli_S betaflight give error after flash to bluejay and put DSHOT 600
SOLVED
Function of rpm_filter_lpf_hz
OSD not showing up on Recon goggles
SOLVED
I can't see the OSD elements
Rates bug when setting very low values, other rate profiles get super sensitive in angle mode
SOLVED
firmware
tuning
Acro mode learning
SOLVED
motors dont spin outside of betaflight
radio doesnt connect to betaflight
This is very odd to me. In the receiver tab, it shows that I have input from my transmitter but when
user2
SOLVED
firmware
configurator
ELRS-RP3-V2 in BF doesn't want to give out CRSF input
SOLVED
Quad freaking out when throttle up after working fine. Slow gyro update in configurator and no yaw.