mental isle
Onsite coworker sends me a photo of one of our recently installed A400s with all the front panel warning LEDs on. I can't find a definite cause.
...
Error: show failed:
Command not supported on this platform.
Use this command instead: system controller service-event show
uamc1::system controller fru led*> system controller service-event show
This table is currently empty.```
"system node run -node <node> -command environment chassis list-sensors" doesn't show anything abnormal, nor does "system chassis fru show"
SPs are online and ok.
We do have some unused Ethernet ports that do show as "Error" in System Manager, but those are intentional. I know there's a way to stop monitoring those, so I'll do that
event logs are mostly complaining about the Harvest login credentials, but that's another problem and shouldn't be turning on warning lights
mental isle
I did dig enough to find that yes, the SP has the LED on
BMC uamc1-04> system fru led show all
0 LED_SYSTEM_LOCATION_01 is off
1 LED_SYSTEM_ATTEN_01 is on
2 LED_CONTROLLER_ATTEN_01 is off
3 LED_CONTROLLER_ACTIVITY_01 is off
Hah, ok, yeah that could be it, this is runing 9.14.1
Thanks @marble wigeon !
Planning a 9.16 upgrade across the board later this summer. These were rebuilt with 9.14 to match existing MetroCluster config.
marble wigeon
