Faulted disk on a DS224-12 shelf \ FAS8200 node

[daring path]

I have replaced this disk twice (1.63TB X343_SSKBE1T8A10)........GUI shows healthly but CLI storage aggregate show-status still shows 1.10.19 in a failed state with aggr degraded. I'm unable to unfail \ fail this disk.......looking for guidance \ next steps....thanks

[tough igloo]

looks like your disk had an aggregate on it, it wasn't a proper zeroed spare. You should be able to just delete that aggregate (probably not from the GUI though)

[daring path]

here's output....not sure about deleting aggr.....lots of other vols in use

[tough igloo]

ah okay sorry I misunderstood that

does it show any spares below that?

[daring path]

and i may not be explaining it well

[tough igloo]

probably need to assign the spare to the node

try storage disk assign -owner BRCNACM01-02 -disk 1.10.19

[daring path]

ok it took that cmd

[tough igloo]

check the aggregate again. is it rebuilding now?

[daring path]

still shows failed

storage aggregate show-status

[tough igloo]

hm, the disk has to be somewhere. it's not a spare anymore so I figured it should be rebuilding...

[daring path]

sync or resync not showing any activity ?

[daring path]

any other ideas here ? thanks

[neon quarry]

Do you have a support contract? It should be working, probably best to do interactive troubleshooting with support

[dense kernel]

Your node BRCNACM01-02 does not have any spares which fit. Reassign one of the following drives to node BRCNACM01-02:
1.11.14, 1.11.20, 1.11.23

Not sure what happend to your 1.10.19 disk though. Might simply be dead too.

Also what Alex said.

[daring path]

the disk was partitioned (P1 & P2) and not assigned to the same node....so it was unable to be assigned and rebuilt......plus auto assignment was disabled for these nodes (not sure how or why?).....had to execute some commands at the node level to be able to assign these partitions correctly which initiated the disk rebuild and completed.