solid hawk
Hello,
I have a problem with my netapp,
I would like to create an ISCSI to add it to my ESXI but it doesn't work.
The SSH ping from the ESXI server to the netapp is OK, the ping from the netapp to the ESXI is OK.
On ESXI, when I add the dynamic links, it automatically adds the static netapp links.
The problem is that I can't see the disk in ESXI's "Adapters" and so I can't use it.
cobalt roost
Can you specify the OnTap and ESXi version. And some more details on the iSCSI configuration in the svm? Also a bit of network topology might help.
drifting ruin
you probably forgot to configure the igroup ("lun masking") in ONTAP
solid hawk
Can you specify the OnTap and ESXi version. And some more details on the iSCSI c...
Hello,
ESXI 6.7.0 and Netapp FAS2620 - Netapp Release 9.4
What information do you need about ISCSI?
In topology of network :
They are the cisco router > Switch Cisco > Server ESXI and Netapp
The netapp are in trunk with one vlan
And the ESXI are in access
The ping are OK so i think is not a problem of network but a problem with the configuration of the netapp
solid hawk
you probably forgot to configure the igroup ("lun masking") in ONTAP
What is this ?
cobalt roost
How did you add the ESXi initiators to the the NetApp svm config?
solid hawk
Here
solid hawk
How did you add the ESXi initiators to the the NetApp svm config?
I don't know if this is the only place I need to enter the iqn.
But is in Storage > SVMS > ISCSI > Initiator Sécurity
And If I set the Security Type to "Default" and then refresh, it is automatically removed, so I have to set it to "None".
cobalt roost
That's the correct place.
And you assigned the LUNs to the initiator?
solid hawk
I hadn't thought of that, so I added the iniator to the lun group.
However, I did a refresh on the ESXI and it did nothing.
This is the configuration of the LUNs
I've also tried adding a Portset to the Iniator groups and then rescanning the ESXI but no change, the disk is not added
Oh is good,After several attempts the disc appeared, thank you!
drifting ruin
I would not use portsets, they overcomplicate things especially in small environments, but ultimately it's up to you
solid hawk
I would not use portsets, they overcomplicate things especially in small environ...
Oh, can it work without the portset?
cobalt roost
Absolutely!