E2800 Single Chassis - ISCSI and FC Protocol | NetApp | Page 1

acoustic harbor May 18, 2023, 11:25 AM

#

Hi All,

How can I convert on of the controllers to ISCSI protocol in the E2800-Prod system. So at the end of the day, I want to use both ISCSI and FC on a single chassis.

Thanks

grizzled glen May 18, 2023, 3:36 PM

#

Hi @acoustic harbor ! Unfortunately, both controllers have to match protocols, otherwise we wouldn't be able to support failover. If you have a HIC installed in this system, you can use the base ports with one protocol, and the HIC ports with the other. Here is a Docs page on how to change the Host Protocols with E2800:
https://docs.netapp.com/us-en/e-series/maintenance-e2800/hpp-overview-supertask-concept.html

acoustic harbor May 18, 2023, 4:57 PM

#

Hi thanks for your answer, so Controller A FC Controller B ISCSI is not used single chassis right?

#E2800 Single Chassis - ISCSI and FC Protocol