dull nest
i don't use the printer about 3 mounth, when i started the printer the cam is off, i update all, i test the latest version and the v3 version, i change camera-stream ecc but don't work
in the file [crowsnest] there is the conf, [cam 2]is the code that work after 3 mounth, in [cam 1] i chnge the line for test
dull nest
make uninstall
crowsnest - A webcam daemon for multiple Cams and stream services.
Ahoi!
To sad that you want to uninstall crowsnest 🙁
This will take a while ...
Please reboot after installation has finished.
Do you REALLY want to remove existing 'crowsnest'? (y/N) y
tools/uninstall.sh: riga 123: /home/fedetox/printer_switchwire_data/systemd/crowsnest.env
/home/fedetox/.local/share/Trash/files/crowsnest.3/resources/crowsnest.env
/home/fedetox/.local/share/Trash/files/crowsnest.2/resources/crowsnest.env
/home/fedetox/.local/share/Trash/files/crowsnest/resources/crowsnest.env: File o directory non esistente
make: *** [Makefile:40: uninstall] Errore 1
and the same whit legacy v3
manic jacinth
Tbh, no idea what this error even means
/home/fedetox/.local/share/Trash/files/crowsnest.3/resources/crowsnest.env
/home/fedetox/.local/share/Trash/files/crowsnest.2/resources/crowsnest.env
/home/fedetox/.local/share/Trash/files/crowsnest/resources/crowsnest.env: File o directory non esistente```This does not make any senseOh I see the problem
This is a PiOS on x86 isn't it?
Send the output of ls /etc/rpi-issue
manic jacinth
Then that's your problem. It's not supported and it's not even intended to run on that. I changed the pi detection and that's the problem for your v4
v3 should work, so just checkout the v3 branch and run make install
dull nest
but 3 mount ago it worked
manic jacinth
Or install a real x86 OS
manic jacinth
but 3 mount ago it worked
That was before I changed the detection
It worked, but it was never supported. So you were just lucky
But now it won't work ever again and there is no need to, as they don't even release such images anymore, as it doesn't make any sense to run PiOS on a x86 computer or on anything besides Raspberry Pis
dull nest
i reinstall v4 version
manic jacinth
v3 should work, so just checkout the v3 branch and run make install
It's not supported and it's not even intended to run on that. I changed the pi detection and that's the problem for your v4
Is it so hard to understand that your current OS does not work with v4?
You can downgrade v4 in theory, but tbh v3 gives you more features than v4 does on your system
manic jacinth
Can you maybe not use a quiet log level if you want help?
You should remove enable_rtsp and rtsp_port
manic jacinth
Send your camera settings
dull nest
where do I find them?
manic jacinth
In the Fluidd settings
dull nest
this?
manic jacinth
You have set port 8081, but use /webcam Change it to /webcam2
