worn flax
So I just made this new nozzle cleaner, but I dont really know how to get the printhead to move a fixed distance from the zero point. If they bed mesh is off, the nozzle just never hits the brush and I do not want it to be buried inside of the brush because that would damage the silicone sock.
[gcode_macro nozzle_clean] gcode: g1 X248 g1 Z5.9 g1 X244 g1 X248 g1 X244 g1 X248 g1 X244 g1 X248 g1 X244 g1 X248 g1 X244 g1 X248
glad ibexBOT
Ahoi @worn flax!
It looks like you did not provide all the necessary information we need to help you.
Please upload your logfiles and a detailed description of your problem.
For further information see: https://docs.mainsail.xyz/faq/getting-help/discord#provide-information
Note: We only accept .log and .txt files as log files.
This is an automated message
mellow blaze
hey there
add G90 at the start of your macro and G91 at the end
okay i looked at my clean nozzle macro, i have G90 at the start, G91, little z move and G90 at the end
worn flax
So the printer moves to the right spot but it sometimes stays above the brush