#Hilfe zu Klipper-Fluidd

1 messages · Page 1 of 1 (latest)

austere quartz
#

hallo ich kam eben neu in den discord hier ich bräuchte auch direkt schon hilfe beim Installieren von Klipper.
Ich habe einen Anycubic Kobra Max mit einem HC32F460 Board/CPU. Ich habe Klipper auf meinem RaspberryPI zum laufen gebrahct allerdings bekomme ich dir Firmware.bin nicht auf das Board vom Drucker geflasht.
Vielleicht kann mir ja jemand dabei helfen.?

dreamy fossilBOT
#

Ahoi @austere quartz!
Welcome to the Mainsail support-forum!
There is a problem with the tags you selected for this post. Please fix them to fit your question.
For further information on tags please check the readme: #readme message

To change the tags of this post:

  1. Open the ... menu on the top right corner of this post.
  2. Find Edit tags
  3. Select the checkbox of the correct tags.

Usually you just need to select one tag!
If you still have no idea which one to choose, feel free to ask here.

Note: This is an automated message

Thanks for your cooperation!

#

Ahoi @austere quartz!
It looks like you did not provide all the necessary information we need to help you.
Please upload your logfiles and a detailed description of your problem.
For further information see: https://docs.mainsail.xyz/faq/getting-help/discord#provide-information
Note: We only accept .log and .txt files as log files.
This is an automated message

Discord | Mainsail

We are glad to help and chat with you on our Community Discord, but if you need help and want the best support possible you should, follow a few simple rules:

cold quarry
#

Hey there, please keep in mind, this server is english only, although there are plenty native german speakers, we have to keep it clearly in english to keep possibility that everyone can help you. Also your are on the Mainsail server and not Fluidd, so questions that are GUI related may left unanswered.