I have z hop set in Cura 2 5.8.1 I think it is but it seems that my Ender 3 Pro is dragging across when moving. It was working when I had Marlin but now not so much. Any ideas?
#Z Hop not Hopping
sleek owl
bitter stratusBOT
Ahoi @sleek owl!
Welcome to the Mainsail support-forum!
There is a problem with the tags you selected for this post. Please fix them to fit your question.
For further information on tags please check the readme: #readme message
To change the tags of this post:
- Open the
...menu on the top right corner of this post. - Find
Edit tags - Select the checkbox of the correct tags.
Usually you just need to select one tag!
If you still have no idea which one to choose, feel free to ask here.
Note: This is an automated message
Thanks for your cooperation!
Ahoi @sleek owl!
It looks like you did not provide all the necessary information we need to help you.
Please upload your logfiles and a detailed description of your problem.
For further information see: https://docs.mainsail.xyz/faq/getting-help/discord#provide-information
Note: We only accept .log and .txt files as log files.
This is an automated message
sleek owl
That's the log from today and the current job the picture is from is still running.
sterile rain
Pls upload the gcode file.
But short answer... When your slicer writes a zhop in your gcode, it doesn't matter which firmware you use. This is a simple movement command in z. If your printer wouldn't do it, your whole print would not work.
sleek owl
Here is the one that ran today corelating to the first picture.
Sorry, GCode... Here is the GCode.
sterile rain
Ok. Zhops are in this gcode. But not very often.
sleek owl
Hmmm ok. Guess I need to revisit my slicer settings.