heater timeout

[tidal parcel]

hi guys i need help have a huge bed of 1 m x 1m and i am heating it with some radiator heating element using a ssr but they take so long to heat up so klipper shuts down is there a way to fix that or do i need to change the heating element

[pale summit]

Ahoi @tidal parcel!
Welcome to the Mainsail support-forum!
There is a problem with the tags you selected for this post. Please fix them to fit your question.
For further information on tags please check the readme: #readme message

To change the tags of this post:

1. Open the ... menu on the top right corner of this post.
2. Find Edit tags
3. Select the checkbox of the correct tags.

Usually you just need to select one tag!
If you still have no idea which one to choose, feel free to ask here.

Note: This is an automated message

Thanks for your cooperation!

[hot chasm]

https://www.klipper3d.org/Config_Reference.html#idle_timeout
https://www.klipper3d.org/G-Codes.html#idle_timeout

So either increase the timeout (recommended) or override the timeout macro that it won't run TURN_OFF_HEATERS (not recommended)

[tidal parcel]

ok i ll try and keep you updated

[pale summit]

Ahoi @tidal parcel!
It looks like you did not provide all the necessary information we need to help you.
Please upload your logfiles and a detailed description of your problem.
For further information see: https://docs.mainsail.xyz/faq/getting-help/discord#provide-information
Note: We only accept .log and .txt files as log files.
This is an automated message

[tidal parcel]

klipper shutsdown
Heater heater_bed not heating at expected rate
See the 'verify_heater' section in docs/Config_Reference.md
for the parameters that control this check.

it shuts douwn after a minute

[hot chasm]

Oh you mean that kind of shutdown....

https://www.klipper3d.org/Config_Reference.html#verify_heater

[tidal parcel]

[verify_heater heater_config_name]
check_gain_time: heater_bed 600

does that looks right