Moving x and y to home z | Mainsail | Page 1

acoustic wren Jan 29, 2024, 2:08 AM

#

Hello,

I have a fresh build 300x300, skr1.4 with TMC 2209s drivers and sensorless homing setup. I am trying to move my x and y axis after they home to then home my z to a 'safe" position, because otherwise it crashes after the y home. Any suggestions?

Thanks,

📎 printer.txt

hollow craterBOT Jan 29, 2024, 2:08 AM

#

Ahoi @acoustic wren!
Welcome to the Mainsail support-forum!
There is a problem with the tags you selected for this post. Please fix them to fit your question.
For further information on tags please check the readme: #readme message

To change the tags of this post:

Open the ... menu on the top right corner of this post.
Find Edit tags
Select the checkbox of the correct tags.

Usually you just need to select one tag!
If you still have no idea which one to choose, feel free to ask here.

Thanks for your cooperation!

echo sequoia Jan 29, 2024, 4:02 AM

#

You do not have any sensorless macro now a homing overwrite section. Read https://www.klipper3d.org/TMC_Drivers.html#sensorless-homing

#Moving x and y to home z