Do i need to copy and paste this into my printer.cfg file? or somewhere else? https://github.com/Klipper3d/klipper/blob/master/config/printer-sovol-sv06-plus-2023.cfg
#Help with setting up printer on Mainsail
balmy rain
agile patio
Do i need to copy and paste this into my printer.cfg file? or somewhere else? ht...
mainsail is only the webinterface. i think you mixed up klipper and mainsail.
pls explain your issue and what do you want todo.
balmy rain
mainsail is only the webinterface. i think you mixed up klipper and mainsail.
p...
I’m on the web interface. It’s hard to explain but the link I have explains how to do this however it’s really confusing to me. I need to setup the parameters of my printer
When I have access to my pc I can screenshot some things
balmy rain
This file contains pin mappings for the stock Sovol SV06 Plus
To use this config, during "make menuconfig" select the
STM32F103 with a "28KiB bootloader" and serial (on USART1 PA10/PA9) communication.
Also, since it is using the GD32F103, please select Disable SWD at startup
Flash this firmware by copying "out/klipper.bin" to a SD card and
turning on the printer with the card inserted. The firmware
filename must end in ".bin" and must not match the last filename
that was flashed.
Note: The stock LCD display does not currently work with Klipper
See docs/Config_Reference.md for a description of parameters.
@agile patio im on the last step here
mystic yoke