mossy crystal
Hello there,
after upating klipper and mainsail i needed to reflash my mcu. And thats where issues began...
Since then, i tried various ways to flash but none worked. Error as shown in the picture
Today i reinstalled my pi from ground up with mainsailos, as i hoped its "cleaner". Previous and Debian Bullseye LTS with manual install.
If anyone has ideas for an solution im more than thankful.
mossy crystal
See <https://docs.vorondesign.com/build/software/octopus_klipper.html#option-2-d...
Thats the guide i followed ^^
scarlet wagon
Use the other, the can command will work
dfu-util -R -a 0 -s 0x08000000:force:mass-erase:leave -D ~/klipper/out/klipper.bin -d 0483:df11
But first check that you are in du mode
scarlet wagon
ls -la ~klipper/
mossy crystal
pi@voron:~/klipper $ ls -la
total 116
drwxr-xr-x 12 pi pi 4096 Dec 11 19:34 .
drwxr-xr-x 16 pi pi 4096 Dec 11 20:28 ..
-rw-r--r-- 1 pi pi 3529 Dec 11 19:34 .config
drwxr-xr-x 2 pi pi 16384 Dec 11 18:47 config
-rw-r--r-- 1 pi pi 1452 Dec 11 19:33 .config.old
-rw-r--r-- 1 pi pi 35149 May 26 2023 COPYING
drwxr-xr-x 5 pi pi 4096 Dec 11 18:47 docs
drwxr-xr-x 8 pi pi 4096 Dec 11 20:33 .git
drwxr-xr-x 4 pi pi 4096 May 26 2023 .github
-rw-r--r-- 1 pi pi 51 May 26 2023 .gitignore
drwxr-xr-x 6 pi pi 4096 Dec 11 18:47 klippy
drwxr-xr-x 36 pi pi 4096 Dec 11 18:47 lib
-rw-r--r-- 1 pi pi 3801 May 26 2023 Makefile
drwxr-xr-x 5 pi pi 4096 Dec 11 19:34 out
-rw-r--r-- 1 pi pi 694 May 26 2023 README.md
drwxr-xr-x 4 pi pi 4096 Dec 11 18:47 scripts
drwxr-xr-x 14 pi pi 4096 Dec 11 18:47 src
drwxr-xr-x 4 pi pi 4096 May 26 2023 test
scarlet wagon
ls -la ~/klipper/out/
mossy crystal
pi@voron:~/klipper $ ls -la ~/klipper/out/
total 1672
drwxr-xr-x 5 pi pi 4096 Dec 11 19:34 .
drwxr-xr-x 12 pi pi 4096 Dec 11 19:34 ..
-rw-r--r-- 1 pi pi 10654 Dec 11 19:34 autoconf.h
lrwxrwxrwx 1 pi pi 26 Dec 11 19:34 board -> /home/pi/klipper/src/stm32
drwxr-xr-x 2 pi pi 4096 Dec 11 19:34 board-generic
-rw-r--r-- 1 pi pi 27 Dec 11 19:34 board-link
-rw-r--r-- 1 pi pi 67113 Dec 11 19:34 compile_time_request.c
-rw-r--r-- 1 pi pi 353 Dec 11 19:34 compile_time_request.d
-rw-r--r-- 1 pi pi 223764 Dec 11 19:34 compile_time_request.o
-rw-r--r-- 1 pi pi 16523 Dec 11 19:34 compile_time_request.txt
-rwxr-xr-x 1 pi pi 30028 Dec 11 19:34 klipper.bin
-rw-r--r-- 1 pi pi 8877 Dec 11 19:34 klipper.dict
-rwxr-xr-x 1 pi pi 1335944 Dec 11 19:34 klipper.elf
drwxr-xr-x 4 pi pi 4096 Dec 11 19:34 lib
drwxr-xr-x 5 pi pi 4096 Dec 11 19:34 src
pi@voron:~/klipper $
But seems like it flashed now
i got some system updates to do and after those it worked. Still dunno what triggered the updates
It updated to dfu-util 0.11 now
scarlet wagon
If the board is flashed then all is ok
