Klipper isn't starting

[wanton canopy]

I am trying to make printer.cfg for my e5+ but klipper doesn't connect with a printer, but with different printer.cfg klipper is working

[wooden spruce]

Errors, logs and maybe those configs would be helpful. My magic glass bowl isn't working atm

[wanton canopy]

i am trying to upload printer.cfg but discord cancels sending this file

[wooden spruce]

Is this the not working one? If so send the klippy.log too, or maybe at least the error shown inside mainsail

[wanton canopy]

this is not working one

[wooden spruce]

What's the output of ls /dev/serial/by-id?

[wanton canopy]

/dev/serial/by-id/usb-Klipper_stm32g0b1xx_400048001350415833323520-if00

[wooden spruce]

Did you copy that from your config or did you execute the command I sent?

[wanton canopy]

I executed command

[wooden spruce]

I'm asking because your log error indicates, that it cannot find it mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32g0b1xx_400048001350415833323520-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32g0b1xx_400048001350415833323520-if00'

Make a screenshot of the error inside mainsail and send the working printer.cfg

[wanton canopy]

and after that there is red error that can't connect to printer

this is working printer.cfg

weird

working printer.cfg doesn't work now

[wooden spruce]

Send the red error

[wanton canopy]

I will try to fix this on my own

thank you very much