#WATCHDOG: Lost Device: 'libcamera'

17 messages · Page 1 of 1 (latest)

deft oracle
#

Hey there, i get "WATCHDOG: Lost Device: 'libcamera' " with a hq cam. everything is up2date on bullseye (relativ fresh image). Log will be in the next message, legacy cam is disabled, memory is at 256mb, its a rpi 4 2gb.

#

Config:

#### crowsnest.conf
#### This is a typical default config.
#### Also used as default in mainsail / MainsailOS
#### See:
#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
#### for details to configure to your needs.


#####################################################################
####                                                            #####
####      Information about ports and according URL's           #####
####                                                            #####
#####################################################################
####                                                            #####
####    Port 8080 equals /webcam/?action=[stream/snapshot]      #####
####    Port 8081 equals /webcam2/?action=[stream/snapshot]     #####
####    Port 8082 equals /webcam3/?action=[stream/snapshot]     #####
####    Port 8083 equals /webcam4/?action=[stream/snapshot]     #####
####                                                            #####
#####################################################################
####    RTSP Stream URL: ( if enabled and supported )           #####
####    rtsp://<ip>:<rtsp_port>/stream.h264                     #####
#####################################################################


[crowsnest]
log_path: /home/pi/printer_data/logs/crowsnest.log
log_level: verbose                      # Valid Options are quiet/verbose/debug
delete_log: false                       # Deletes log on every restart, if set to true
no_proxy: true

[cam 1]
mode: camera-streamer                         # ustreamer - Provides mjpg and snapshots. (All devices)
                                        # camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
enable_rtsp: true                      # If camera-streamer is used, this enables also usage of an rtsp server
rtsp_port: 8554                         # Set different ports for each device!
port: 8080                              # HTTP/MJPG Stream/Snapshot Port
device: libcamera                     # See Log for available ...
resolution: 1920x1080                     # widthxheight format
max_fps: 30                             # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags:                          # You can run the Stream Services with custom flags.
#v4l2ctl:                               # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
#

Ping me pls when you answer, thx 🙂

warm verge
#

@deft oracle Serious???? I thought you would read stuff we write xD

deft oracle
#

huh, what did i oversaw?

#

sorry i am sometimes just blind XD

warm verge
#

In your case [05/26/23 19:29:25] crowsnest: Detected 'libcamera' device -> /base/soc/i2c0mux/i2c@1/imx477@1a

#

So how does the device:entry look like for your case?

deft oracle
#

device: /base/soc/i2c0mux/i2c@1/imx477@1a # See Log for available .

#

i just looked to fast i guess? XD

warm verge
#

Please close if solved 😉

deft oracle
#

yeah wait let me test it first ^^

#

last comment: its hella smooth, awesome work guys!

warm verge
#

Test it but you will close it anyway

deft oracle
#

yeah sure and sorry about my blindness xd