Hello a question I would like to disable the autofocus from my Microsoft Q2F-00015 LifeCam USB webcam, is that possible in the Webcam.txt? Also I would be interested if the quality of the video would be better via Crowsnest?
#Webcam
plain yoke
hot oasis
Hello a question I would like to disable the autofocus from my Microsoft Q2F-000...
Dont know why you have a webcam.txt but no, not possible. The Streamer can not deliver a better quality as your cam provides, so I think in terms of Image Quality they are equal...
plain yoke
The camera brings a better resolution on the PC. Therefore my question. Can be that I still have the Webcam.txt, thereby I have not yet made an update.
hot oasis
Ah ok, you'd used KIAUH or something like that to get up and running.. In MainsailOS crowsnest is default, therefor my question
The maximum Resolution depends on your network connection. It might improve resolution and framerate but its simply limited by your connection
If you use a wired connection might be possible you could go full blown what cam delivers but as said no garantee it will...
plain yoke
Kiauh or the like was not used. Mainsale OS with Raspberry Pi Imager was installed. I try the days times Crowsnest to install. Maybe the resolution will change, the printer is connected to a gb network, speed should not be a problem.
hot oasis
Oh, ok, then it is a real old Image. Nice to see
Newer verions show the MainsailOS version in the mashine tab as well
hot oasis
No need for as long it is running, simply install crowsnest, it will ask to remove webcamd.
plain yoke
Thx
plain yoke
No need for as long it is running, simply install crowsnest, it will ask to remo...
Hi unfortunately have a problem, have all updated and installed Crowsnest. Unfortunately was not asked if I want to remove the webcam.txt. Have now both, unfortunately, the camera responds only to the Webcam.txt. Crowsnest is ignored.
hot oasis
Please show output of sudo systemctl status webcamd
plain yoke
hot oasis
Ok, something went wrong or I have a bug in the installer. Simply run sudo systemctl disable webcamd --now reboot after
plain yoke
Please show output of `sudo systemctl status webcamd`
Now the webcam does not work at all?
hot oasis
You have to setup your crowsnest.conf according to your camera.
See its README on how to.
plain yoke
Did I or do I understand something wrong?
plain yoke
Found the error. Unfortunately, the resolution was 1920 x 1080 and you must not disc with distance. Now it works. Thanks