compact wolf
hey i treid including the mainsail.cfg in the printer.cfg and now i always get the error show in the image
Printer.cfg
#Included the Cfg right here just dont edit the other stuff
[include mainsail.cfg]
[stepper_x]
step_pin: PB13
dir_pin: !PB12
enable_pin: !PB14
microsteps: 16
rotation_distance: 40
endstop_pin: ^PC0
position_endstop: 0
position_max: 235
homing_speed: 50
karmic garden
Can you send the Klippe.log. I never seen that
compact wolf
Can you send the Klippe.log. I never seen that
jup
compact wolf
Can you send the Klippe.log. I never seen that
idk only thing i found only are online are about corrupt files
chatgpt told me that this are config errors
not sure what to do right now
karmic garden
Never seen that, the macros look ok to me
Are you up to date?
I see it is a Armbian buster
compact wolf
Are you up to date?
not really
karmic garden
The dirty at Klipper rings an alarm bell for me
ssh in your sbc
cd klipper
git status
Show me the output
compact wolf
Show me the output
karmic garden
You need to do that on your host as said ssh in the host
compact wolf
You need to do that on your host as said ssh in the host
oh my bad give me a min
karmic garden
Ok why is that file modified?
No do not do a git pull yet
But the modification to that file could explain the error as we activate [virtual_sdcard]
git diff klippy/extras/virtual_sdcard.py
compact wolf
Ok why is that file modified?
idk didnt touched that
karmic garden
Someone did …
If it was not intended than
git status```And also git remote show origin
compact wolf
jeah gonna tell him that
to be true i have a german freind who is horrible in english who lives near who have this problem and i translate it right now for him and explains him everything since i know some stuff about software.
Well he dont response so fast
thats why it takes so long
Hopes thats ok 😅
karmic garden
Sure but I will switch off if it takes to long
compact wolf
Sure but I will switch off if it takes to long
jeah all good idk why he dont respon right now
gonna slap him for that XD
compact wolf
```git diff klippy/extras/virtual_sdcard.py```
karmic garden
Ok now reboot and see if the error is gone
compact wolf
Ok now reboot and see if the error is gone
nope seems to be still there
he turned it off and on
karmic garden
Ok than we need to update all, but to warn you that might force you to update the mcu board
The macros are shipped with more than 40k downloads and I never seen a problem like that
But that is also the first mkspi that I see
So update Klipper and moonraker and see what happens
compact wolf
id dint installed klipper for him therefore I am not yet initiated with the commands,
so what do i need to do?
karmic garden
What we also can do is comment out the
path: ~/gcode_files```in the mainsail.cfg?
karmic garden
Of mainsail.cfg and see if the error is gone. We need that later but let’s see if it was really the route cause
compact wolf
Of mainsail.cfg and see if the error is gone. We need that later but let’s see i...
this opend
karmic garden
This is expected as we removed the virtual sdcard
compact wolf
okay so what now?
karmic garden
But is Klipper up and running?
compact wolf
is there a command i can check with?
karmic garden
Simple look in the console of Mainsail you should see Klipper state: Ready
compact wolf
Simple look in the console of Mainsail you should see `Klipper state: Ready`
should be running yes
compact wolf
karmic garden
Hmm. I run out of ideas gcode_files is the correct path
compact wolf
hmm okay so simply update?
karmic garden
Virtual_sdcard is a basic Klipper feature https://www.klipper3d.org/Config_Reference.html#virtual_sdcard
Yes I would try an update but honestly I am not sure if it will help
The mks pi and there Image is completely unknown to me
compact wolf
maiby just some outdated code or so
how shoudl he do it?
compact wolf
The mks pi and there Image is completely unknown to me
idk it either i get a cb1 for klipper soon
karmic garden
Use the updater in mainsail update Klipper first and then moonraker
compact wolf
any commands for this to use or do he just need to press some buttons as sayed im not sitting next to him right now i cant check by myself :/
karmic garden
Start with the blue circle above
That will remove the dirty and he will see “update”. The blue update is a button 😉
compact wolf
oh bruh 🤐
compact wolf
That will remove the dirty and he will see “update”. The blue update is a button...
@karmic garden soft or hard recovery?
karmic garden
Hard
compact wolf
@karmic garden Okay he did that
error is gone but he cant print gcode
karmic garden
Have you get the virtual sd card definition back?
compact wolf
Have you get the virtual sd card definition back?
yes
karmic garden
Moonraker.log
compact wolf
Moonraker.log
karmic garden
It gets to late for me. I will look into it tomorrow morning
compact wolf
okay
karmic garden
Please write in here if you solve it before that
compact wolf
Please write in here if you solve it before that
jup somehow with the update there we a diefferent upload path for the gcodes now it worked
[virtual_sdcard]
path: ~/printer_data/gcodes