Klipper vs Klippy | Mainsail | Page 1

fervent jacinth Nov 26, 2022, 3:38 PM

#

my moonraker.conf is asking for virtual_sdcard]
path: /home/pi/printer_data/gcodes but my klipply log has
[virtual_sdcard]
path = /home/pi/gcode_files
Are this two suppose to be the same cause my printer is unable to open file to print.
Thanks

desert reef Nov 26, 2022, 5:11 PM

#

Yes you need to change it in your printer.cfg

#

Moonraker has changed all data pathes

fervent jacinth Nov 26, 2022, 5:18 PM

#

Thanks, (printer.cog) is that located in the pi? I'm not familiar with that term thanks for your help

desert reef Nov 26, 2022, 5:58 PM

#

Sorry that’s the stupid autocorrection it should be printer.cfg

fervent jacinth Nov 26, 2022, 6:02 PM

#

Np, Thanks for helping me getting this printer back online.

#

Alexz, I went into printer.cfg and updated virtual_sdcard and restarted printer/pi and it still looks like the part remains [virtual_sdcard]
path = /home/pi/gcode_files in the kilppy log. still not able to open file to print.

desert reef Nov 26, 2022, 6:20 PM

#

That means you have it 2 times in, open the mainsail.cfg in there is also an virtual sdcard definition

#Klipper vs Klippy