KlipperMainsail screen saying it cant be reached when it still printing.

[jagged cedar]

I have klipper using mainsail running on my pi 4b 8gb connected to an skr mini e3 v3, Everything is running fine apart from sometimes i wont be able to access the mainsail page as it just site cant be reached on what ever device i am trying to open to. I am sure klippper is still running as it sometimes does that mid printing and the print is going fine, just wont have any access to klipper/mainsail any idea how to fix this random issue? also i should mention once i lose access the only way to get it back is to restart the pi, but it very random when it does happen

[pearl nymph]

do you use wifi on your rpi?

[jagged cedar]

yes

is that the problem?

[pearl nymph]

this is your problem 🙈

rpi have a wired issue with changing wifi channels

[jagged cedar]

ah i see okay that make sense i need some how get an ethernet to it then

[pearl nymph]

for example your router is changing between them and the rpi dont realize it. so we added a programm in mainsailOS to have some "help" with this issue:

https://github.com/mainsail-crew/sonar/

sonar should be already installed on your installation. so you just have to config it

[jagged cedar]

okay yeah i saw that on the update menu

just never know what it did

i will have a look into that thank you for the help

[pearl nymph]

yeah... just try to config it and test it again. it could be possible, that it will fix your issue (or just with a minimum delay of 10 seconds). if you have also issues with sonar, it could be possile, that you have to change some settings on your wifi router or change to ethernet (its the best solution).