support-forum
Moonraker
moonraker
crowsnest v3 to v4
webcam
Have 6 Prusa Mini/Mk3s+ need advice on smart setup
mainsailOS
klipper
how to open the pictures that come out of the shaper
klipper
Cant open raspi-config
linux
mainsail
klipper
Move out or range when trying to home//bed_mesh_calibrate
klipper
quick question to Measuring Resonances
klipper
Timeouts and disconnects from multiple MCU's
klipper
update buster
mainsailOS
printer.cfg tr probe config help
klipper
trying to install webcam but get error
webcam
SOLVED:Can't get two webcams to work at the same time (answer in 1 post)
webcam
Camera goes stale and does not recover with crowsnest restart. Requires Rpi4 reboot.
webcam
How can I enforce camera resolution/framerate in Mainsail?
webcam
Are the signs of [probe] or [bltouch] x_offset and y_offset the same as Marlin?
klipper
Change webcam FPS for KlipperScreen only?
webcam
New control board, same old firmware that worked before
klipper
[gcode_macro CANCEL_PRINT] error
klipper
Raspberry Pi camera working, but cropped
webcam
How do I upgrade mainsailOS?
mainsailOS
Can see rpi camera with libcamera-hello --list-cameras, but not in crowsnest log
webcam
Failed Crowsnest Install
webcam
Cam black screen at highest res.
webcam
Pi-cam2 don't work anymore
mainsail
mainsailOS
Problems with ov5647 and crownest v4
mainsail
webcam
Raspberry Camera “zoomed” in
webcam
Crowsnet issue
webcam
Large Delta Printer Prints Calibration Cube Stretched on the Z
mainsail
klipper
Migration from buster version of MainsailOS (0.6.0) to current version
mainsailOS
camera fps
webcam
mainsailos.local
mainsail
mainsailOS
Infinite memory when using webcam on /cam and main dashboard
mainsail
webcam
update in kiauh today and then mainsail down
klipper
Install environment file ... [FAILED]
webcam
mainsail
klipper
Installed a new RPi cam and I fail to set it up
webcam
Crowsnest v3 -->v4 issues
webcam
cant connect using orca slicer with mainsail
mainsail
klipper
Inverted extruder
mainsail
Lost connection to MCU after update
klipper
Followed instructions from #announcements, now MCU unable to connect
webcam
mainsail
klipper
Any Crowsnest V4 x86 for the near future ?
webcam
mcu': Unable to open serial port: [Errno 2] could not open port
klipper
Mainsail fail to connect to secondary printer
linux
moonraker
mainsail
Crownest no Webcam Picture after System reboot.
webcam
Crowsnest - Default for printer_data in make config aren't being applied
webcam
Web Cam down
webcam
2023/05/28 08:55:12 [error] 724#724: *2025 send() failed (32: Broken pipe) while proxying upgraded c
mainsail
mainsailOS
crownsest error
webcam
Crowsnest: no Pi camera after upgrade to klipper from octoprint
webcam
crowsnest no device found
webcam