#Node modules error

1 messages · Page 1 of 1 (latest)

zenith tinselBOT
#

Hi @unique pier. I'm kapa.ai, your friendly support bot. I will try to answer your question by searching through the knowledge base. :wave:

#

The error you're encountering is related to the size of the Next.js SWC binary files exceeding GitHub's file size limit. This is a known issue that has been discussed in the Next.js community. Here's what you need to know and how to address it:

  1. The Problem:
    The @next/swc-darwin-arm64 binary files for both your blog and website are over 120MB, which exceeds GitHub's 100MB file size limit. This is preventing you from pushing your code to GitHub.

  2. Why it's happening:
    Next.js includes platform-specific SWC binaries to improve performance. These binaries can be quite large, especially for ARM64 architectures.

  3. Solution:
    The recommended approach is to exclude these large binary files from your Git repository. You can do this by updating your .gitignore file.

    Add the following lines to your .gitignore:

    # Next.js SWC binaries
**/node_modules/@next/swc-*

    This will prevent the large SWC binary files from being tracked by Git.

  4. Additional considerations:

    • Make sure to remove these files from Git tracking if they've already been committed:
      git rm --cached blog/node_modules/@next/swc-darwin-arm64/next-swc.darwin-arm64.node
git rm --cached website/node_modules/@next/swc-darwin-arm64/next-swc.darwin-arm64.node
    • You may need to adjust your build process to ensure these binaries are available during deployment, depending on your hosting setup.

For more detailed information on this issue and potential solutions, you can refer to the following GitHub issue discussion: Github Issue: Fresh Next projects can't be pushed to GitHub due to size of tracked @next/swc binary.

#

Remember, while excluding these files solves the immediate GitHub push problem, you'll need to ensure your deployment process can handle downloading or building these binaries as needed.

Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:

#

@unique pier Kapa.ai is still learning and improving, please let me know how I did by reacting below.

unique pier
#

@zenith tinsel It's still failing with the same error even after adding it to .gitignore and removing tracking from git

zenith tinselBOT
#

Let me check the knowledge base for you again. Give me one moment! :books:

#

I understand you're still encountering the same error even after updating your .gitignore file and removing the tracking from Git. Let's explore some additional steps to resolve this issue:

  1. Verify .gitignore:
    Double-check that your .gitignore file is correctly updated and placed in the root of your repository. Make sure there are no typos in the patterns you added.

  2. Clean Git cache:
    Sometimes, Git can cache files that were previously tracked. Try cleaning the Git cache with the following commands:

    git rm -r --cached .
git add .
git commit -m "Remove ignored files"

    This will remove all files from the Git cache and re-add them, respecting your new .gitignore rules.

  3. Check for lingering large files:
    Use the following command to identify any remaining large files in your Git history:

    git rev-list --objects --all | git cat-file --batch-check='%(objecttype) %(objectname) %(objectsize) %(rest)' | sed -n 's/^blob //p' | sort -n -k 2 | tail -n 10

    This will show you the 10 largest files in your repository. If you see the SWC binaries still listed, you may need to rewrite your Git history to remove them completely.

  4. Consider using Git LFS:
    If the above steps don't work, you might want to consider using Git Large File Storage (LFS). This allows you to track large files without actually storing them in your main Git repository. However, this is generally not recommended for node_modules contents.

  5. Ensure clean node_modules:
    Make sure you're not accidentally committing the entire node_modules directory. Your .gitignore should include:

    node_modules
#
  1. Use a .gitignore specific to Next.js:
    Consider using a more comprehensive .gitignore file specifically designed for Next.js projects. You can find an example in the Next.js GitHub repository.

If you're still encountering issues after trying these steps, it's possible that the problem lies deeper in your Git history or project structure. In that case, you might need to consider more drastic measures like creating a new repository and migrating your code, ensuring from the start that the large files are not tracked.

For more detailed information on handling large files in Git and Next.js projects, you can refer to the following resources:

Remember, when dealing with multi-zone setups, it's crucial to manage your dependencies and build processes carefully to avoid these kinds of issues.

Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:

#

@unique pier Kapa.ai is still learning and improving, please let me know how I did by reacting below.

unique pier
#

@zenith tinsel So for my multi-zone setup does each zone needs its own .gitignore or do I only need one in the root directory

zenith tinselBOT
#

Let me check the knowledge base for you again. Give me one moment! :books:

#

To answer your question about .gitignore files in a multi-zone setup, let's refer to the relevant information from our knowledge sources:

According to the Vercel guide on deploying monorepos, for a multi-zone setup (which is essentially a monorepo structure), you should have a single .gitignore file at the root of your project. The guide states:

"Add a .gitignore file at the root:

touch .gitignore

Paste the following content:

node_modules
```"

This approach suggests that a single .gitignore file in the root directory is sufficient for managing ignored files across all zones in your multi-zone setup.

Additionally, the [Next.js documentation on Multi-Zones](<https://nextjs.org/docs/pages/building-your-application/deploying/multi-zones>) doesn't mention any need for multiple .gitignore files.

Therefore, based on these sources, you only need one .gitignore file in the root directory of your multi-zone project. This single file will apply to all zones in your setup. Make sure this .gitignore file includes all the necessary patterns to ignore the large SWC binary files we discussed earlier, as well as other files and directories that shouldn't be tracked by Git (like node_modules).

Remember to include patterns that will cover all zones, for example:

Node modules for all zones

**/node_modules

Next.js SWC binaries for all zones

*/@next/swc-

Other common Next.js ignores

**/.next
**/out


This approach will keep your repository structure clean and ensure consistent ignoring of files across all your zones.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------
#

@unique pier Kapa.ai is still learning and improving, please let me know how I did by reacting below.

unique pier
#

@zenith tinsel This was the output for the lingering large files

941c7d6bf413c35d35a6e52a82fab2f4e59cb0a6 15578152 blog/node_modules/@img/sharp-libvips-darwin-arm64/lib/libvips-cpp.42.dylib
75c3553a05cbecfaa3141426c5447b5b5cde34a3 15945010 website/public/solutions/handshake.jpeg
444746cb15b8e938f72552db5da32cedc23c9248 16155570 website/public/summer-picnic/sp12.png
a25a1ba8f0934d55dcf75d661f0c3ec6f8c45ffd 16904360 website/node_modules/.prisma/client/libquery_engine-darwin-arm64.dylib.node
88020b384340209ae84213394cc3a9eda85f496d 17334944 website/node_modules/.prisma/client/libquery_engine-darwin-arm64.dylib.node
e36bf18a7f3591f282830348a89272f942cb4db3 19576384 website/node_modules/@prisma/engines/schema-engine-darwin-arm64
f50a7648a50b7981c9b0d4dc0f6830177c93ca7e 19771168 website/node_modules/@prisma/engines/schema-engine-darwin-arm64
61a5582dfebb2d0d5d41dd406db029510799f6ce 66864333 website/public/AccoladeHomePage.mp4
13a370eba701d07f1ddf4e9686c950f7491eca59 127622104 website/node_modules/@next/swc-darwin-arm64/next-swc.darwin-arm64.node
7fb30fbd2a682e3eafee241e04aaadc775cd33de 127638648 blog/node_modules/@next/swc-darwin-arm64/next-swc.darwin-arm64.node
zenith tinselBOT
#

Let me check the knowledge base for you again. Give me one moment! :books:

#

Thank you for providing the output of the lingering large files. Based on this information, we can see that there are still several large files in your repository, including the Next.js SWC binaries that were causing the initial issue. Let's analyze this and provide some recommendations:

  1. Next.js SWC binaries:
    The largest files are still the SWC binaries for both your blog and website:

    127622104 website/node_modules/@next/swc-darwin-arm64/next-swc.darwin-arm64.node
127638648 blog/node_modules/@next/swc-darwin-arm64/next-swc.darwin-arm64.node

    These are the files causing the GitHub file size limit error. They should be excluded from Git tracking.

  2. Prisma engine files:
    There are also large Prisma engine files:

    16904360 website/node_modules/.prisma/client/libquery_engine-darwin-arm64.dylib.node
17334944 website/node_modules/.prisma/client/libquery_engine-darwin-arm64.dylib.node
19576384 website/node_modules/@prisma/engines/schema-engine-darwin-arm64
19771168 website/node_modules/@prisma/engines/schema-engine-darwin-arm64

    These should also be excluded from Git tracking.

  3. Large media files:
    There's a large video file:

    66864333 website/public/AccoladeHomePage.mp4

    And some large image files:

    15945010 website/public/solutions/handshake.jpeg
16155570 website/public/summer-picnic/sp12.png

    Consider if these media files need to be in the repository or if they could be stored elsewhere.

To address these issues, update your root .gitignore file with the following:

# Next.js SWC binaries
**/node_modules/@next/swc-*

# Prisma engine files
**/node_modules/.prisma/client/libquery_engine-*
**/node_modules/@prisma/engines/schema-engine-*

# Node modules (if not already included)
**/node_modules
#

Consider excluding large media files if they don't need version control

website/public/AccoladeHomePage.mp4

website/public/solutions/handshake.jpeg

website/public/summer-picnic/sp12.png


After updating the .gitignore, you'll need to remove these files from Git tracking:

git rm --cached -r */node_modules/@next/swc-
git rm --cached -r */node_modules/.prisma/client/libquery_engine-
git rm --cached -r */node_modules/@prisma/engines/schema-engine-


Then commit these changes:

git add .gitignore
git commit -m "Update .gitignore to exclude large binary files"


If you're still having issues pushing to GitHub after these steps, you may need to use [Git Large File Storage (LFS)](<https://git-lfs.com/>) for your large media files, or consider hosting them separately from your Git repository.

For more information on handling large files in Next.js projects, you can refer to this GitHub issue discussion: [Fresh Next projects can't be pushed to GitHub due to size of tracked @next/swc binary](<https://github.com/vercel/next.js/issues/65586>).

Remember, these changes will affect your deployment process. Ensure your build and deployment scripts account for these excluded files, especially for the Prisma and Next.js binaries.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------